Physical Disk Identify - Revision history

Qadmin: Redirect this dialog help page to the Administrator Guide section that documents it (QSTOR-12352). These pages were generated and contain unverified detail; the Help button URL is unchanged, so deployed appliances now land on verified content.

2026-09-04T05:19:51Z

Redirect this dialog help page to the Administrator Guide section that documents it (QSTOR-12352). These pages were generated and contain unverified detail; the Help button URL is unchanged, so deployed appliances now land on verified content.

← Older revision		Revision as of 05:19, 4 September 2026
Line 1:		Line 1:
	[[~~File:Identify Phy Dsk.jpg\|512px\|thumb\|Generates IO activity on the disk to make the drive LED pulse on/off every 2 seconds.]]~~		#REDIRECT [[Physical Disks/Devices#Physical disk actions]]

	~~In QuantaStor, "Identify~~ Physical Disk" is a feature that helps administrators locate and identify specific physical disks within a storage system. It is particularly useful in large-scale storage environments where there may be a large number of disks installed.

	The purpose of the "Identify Physical Disk" function is to provide a visual cue. When activated, the system triggers an LED light by generating IO activity on the disk by reading data in order to make the drive LED pulse on/~~off every 2 seconds. This allows administrators to quickly identify the disk they are looking for among a group of similar disks.~~

	By using this feature, administrators can perform various tasks more efficiently, such as replacing a faulty disk, adding new disks, or reconfiguring storage arrays. Instead of relying solely on disk slot numbers or serial numbers, they can visually confirm the physical location of a specific disk based on the identification signal.

	~~Overall, the purpose of the "Identify~~ Physical ~~Disk" feature in QuantaStor is to simplify~~ disk ~~management and maintenance by providing a means to quickly and accurately identify the physical disks within a storage system.~~

	~~'''Note:''' for hardware RAID units and disks there are separate identification operations available under the Hardware Enclosure & Controllers section.~~


	~~'''Navigation:''' Storage Management --> Physical Disks --> Physical Disk --> Identify ''(toolbar)''~~


	~~{{Template:ReturnToWebGuide}}~~
	~~[[Category:QuantaStor6]]~~
	~~[[Category:WebUI Dialog~~]]

Qadmin at 23:08, 22 April 2024

2024-04-22T23:08:59Z

← Older revision		Revision as of 23:08, 22 April 2024
Line 1:		Line 1:
	[[File:Identify Phy ~~Disk~~.jpg\|512px\|thumb\|Generates IO activity on the disk to make the drive LED pulse on/off every 2 seconds.]]		[[File:Identify Phy Dsk.jpg\|512px\|thumb\|Generates IO activity on the disk to make the drive LED pulse on/off every 2 seconds.]]

	In QuantaStor, "Identify Physical Disk" is a feature that helps administrators locate and identify specific physical disks within a storage system. It is particularly useful in large-scale storage environments where there may be a large number of disks installed.		In QuantaStor, "Identify Physical Disk" is a feature that helps administrators locate and identify specific physical disks within a storage system. It is particularly useful in large-scale storage environments where there may be a large number of disks installed.

Qadmin at 18:31, 5 June 2023

2023-06-05T18:31:37Z

← Older revision		Revision as of 18:31, 5 June 2023
Line 3:		Line 3:
	In QuantaStor, "Identify Physical Disk" is a feature that helps administrators locate and identify specific physical disks within a storage system. It is particularly useful in large-scale storage environments where there may be a large number of disks installed.		In QuantaStor, "Identify Physical Disk" is a feature that helps administrators locate and identify specific physical disks within a storage system. It is particularly useful in large-scale storage environments where there may be a large number of disks installed.

	The purpose of the "Identify Physical Disk" function is to provide a visual ~~que~~. When activated, the system triggers an LED light by generating IO activity on the disk by reading data in order to make the drive LED pulse on/off every 2 seconds. This allows administrators to quickly identify the disk they are looking for among a group of similar disks.		The purpose of the "Identify Physical Disk" function is to provide a visual cue. When activated, the system triggers an LED light by generating IO activity on the disk by reading data in order to make the drive LED pulse on/off every 2 seconds. This allows administrators to quickly identify the disk they are looking for among a group of similar disks.

	By using this feature, administrators can perform various tasks more efficiently, such as replacing a faulty disk, adding new disks, or reconfiguring storage arrays. Instead of relying solely on disk slot numbers or serial numbers, they can visually confirm the physical location of a specific disk based on the identification signal.		By using this feature, administrators can perform various tasks more efficiently, such as replacing a faulty disk, adding new disks, or reconfiguring storage arrays. Instead of relying solely on disk slot numbers or serial numbers, they can visually confirm the physical location of a specific disk based on the identification signal.

Qadmin at 18:23, 5 June 2023

2023-06-05T18:23:06Z

← Older revision		Revision as of 18:23, 5 June 2023
Line 1:		Line 1:
	Generates IO activity on the disk by reading data in order to make the drive LED pulse on/off every 2 seconds. This can ~~help identify~~ a disk ~~drive~~ in the ~~chassis<br>~~		[[File:Identify Phy Disk.jpg\|512px\|thumb\|Generates IO activity on the disk to make the drive LED pulse on/off every 2 seconds.]]

			In QuantaStor, "Identify Physical Disk" is a feature that helps administrators locate and identify specific physical disks within a storage system. It is particularly useful in large-scale storage environments where there may be a large number of disks installed.

			The purpose of the "Identify Physical Disk" function is to provide a visual que. When activated, the system triggers an LED light by generating IO activity on the disk by reading data in order to make the drive LED pulse on/off every 2 seconds. This allows administrators to quickly identify the disk they are looking for among a group of similar disks.

			By using this feature, administrators can perform various tasks more efficiently, such as replacing a faulty disk, adding new disks, or reconfiguring storage arrays. Instead of relying solely on disk slot numbers or serial numbers, they can visually confirm the physical location of a specific disk based on the identification signal.

			Overall, the purpose of the "Identify Physical Disk" feature in QuantaStor is to simplify disk management and maintenance by providing a means to quickly and accurately identify the physical disks within a storage system.

	'''Note:''' for hardware RAID units and disks there are separate identification operations available under the Hardware Enclosure & Controllers section.		'''Note:''' for hardware RAID units and disks there are separate identification operations available under the Hardware Enclosure & Controllers section.


	'''Navigation:''' Storage Management --> Physical Disks --> Physical Disk --> Identify ''(toolbar)''		'''Navigation:''' Storage Management --> Physical Disks --> Physical Disk --> Identify ''(toolbar)''

	~~[[File:Identify Phy Disk.jpg\|512px]]~~

Qadmin at 19:41, 1 November 2022

2022-11-01T19:41:04Z

← Older revision		Revision as of 19:41, 1 November 2022
Line 9:		Line 9:

	{{Template:ReturnToWebGuide}}		{{Template:ReturnToWebGuide}}
	[[Category:~~QuantaStor5~~]]		[[Category:QuantaStor6]]
	[[Category:WebUI Dialog]]		[[Category:WebUI Dialog]]

Qadmin at 21:10, 5 November 2020

2020-11-05T21:10:28Z

← Older revision		Revision as of 21:10, 5 November 2020
Line 1:		Line 1:
	~~[[File:Identify Phy Disk.jpg\|thumb\|512px\|The physical disk LED for the selected disk to flash on and off in a pattern so that the disk may be easily identified in the enclosure.]]~~

	Generates IO activity on the disk by reading data in order to make the drive LED pulse on/off every 2 seconds. This can help identify a disk drive in the chassis<br>		Generates IO activity on the disk by reading data in order to make the drive LED pulse on/off every 2 seconds. This can help identify a disk drive in the chassis<br>
	'''Note:''' for hardware RAID units and disks there are separate identification operations available under the Hardware Enclosure & Controllers section.		'''Note:''' for hardware RAID units and disks there are separate identification operations available under the Hardware Enclosure & Controllers section.
Line 7:		Line 5:
	'''Navigation:''' Storage Management --> Physical Disks --> Physical Disk --> Identify ''(toolbar)''		'''Navigation:''' Storage Management --> Physical Disks --> Physical Disk --> Identify ''(toolbar)''

	~~<br><br><br><br><br>~~		[[File:Identify Phy Disk.jpg\|512px]]

Qadmin at 01:06, 17 January 2020

2020-01-17T01:06:51Z

← Older revision		Revision as of 01:06, 17 January 2020
Line 3:		Line 3:
	Generates IO activity on the disk by reading data in order to make the drive LED pulse on/off every 2 seconds. This can help identify a disk drive in the chassis<br>		Generates IO activity on the disk by reading data in order to make the drive LED pulse on/off every 2 seconds. This can help identify a disk drive in the chassis<br>
	'''Note:''' for hardware RAID units and disks there are separate identification operations available under the Hardware Enclosure & Controllers section.		'''Note:''' for hardware RAID units and disks there are separate identification operations available under the Hardware Enclosure & Controllers section.


	'''Navigation:''' Storage Management --> Physical Disks --> Physical Disk --> Identify ''(toolbar)''		'''Navigation:''' Storage Management --> Physical Disks --> Physical Disk --> Identify ''(toolbar)''
	~~<br>~~<br><br><br><br><br>
			<br><br><br><br><br>


	{{Template:ReturnToWebGuide}}		{{Template:ReturnToWebGuide}}
	[[Category:~~QuantaStor4~~]]		[[Category:QuantaStor5]]
	[[Category:WebUI Dialog]]		[[Category:WebUI Dialog]]

Qadmin at 18:26, 22 August 2019

2019-08-22T18:26:13Z

← Older revision		Revision as of 18:26, 22 August 2019
Line 5:		Line 5:

	'''Navigation:''' Storage Management --> Physical Disks --> Physical Disk --> Identify ''(toolbar)''		'''Navigation:''' Storage Management --> Physical Disks --> Physical Disk --> Identify ''(toolbar)''
	<br><br><br><br><br>		<br><br><br><br><br><br>

Qadmin at 18:26, 22 August 2019

2019-08-22T18:26:03Z

← Older revision		Revision as of 18:26, 22 August 2019
Line 5:		Line 5:

	'''Navigation:''' Storage Management --> Physical Disks --> Physical Disk --> Identify ''(toolbar)''		'''Navigation:''' Storage Management --> Physical Disks --> Physical Disk --> Identify ''(toolbar)''
			<br><br><br><br><br>

Qadmin at 18:25, 22 August 2019

2019-08-22T18:25:30Z

← Older revision		Revision as of 18:25, 22 August 2019
Line 1:		Line 1:
	[[File:Identify Phy Disk.jpg\|thumb\|512px\|The physical disk LED for the selected disk to flash on and off in a pattern so that the disk may be easily identified in the enclosure.]]		[[File:Identify Phy Disk.jpg\|thumb\|512px\|The physical disk LED for the selected disk to flash on and off in a pattern so that the disk may be easily identified in the enclosure.]]

	Generates IO activity on the disk by reading data in order to make the drive LED pulse on/off every 2 seconds. This can help identify a disk drive in the chassis~~. <br>~~<br>'''Note:''' for hardware RAID units and disks there are separate identification operations available under the Hardware Enclosure & Controllers section.		Generates IO activity on the disk by reading data in order to make the drive LED pulse on/off every 2 seconds. This can help identify a disk drive in the chassis<br>
			'''Note:''' for hardware RAID units and disks there are separate identification operations available under the Hardware Enclosure & Controllers section.

	'''Navigation:''' Storage Management --> Physical Disks --> Physical Disk --> Identify ''(toolbar)''		'''Navigation:''' Storage Management --> Physical Disks --> Physical Disk --> Identify ''(toolbar)''