QuantaStor Configuration Files - Revision history

Qadmin: Point at the renamed Encryption Bypass page directly rather than through the redirect - the feature is not Ceph-specific

2026-09-04T05:58:14Z

Point at the renamed Encryption Bypass page directly rather than through the redirect - the feature is not Ceph-specific

← Older revision		Revision as of 05:58, 4 September 2026
Line 40:		Line 40:
	\| <code>qs_enclosure_layout.conf</code> \|\| List of supported JBOD and Server enclosures with slot mapping information.		\| <code>qs_enclosure_layout.conf</code> \|\| List of supported JBOD and Server enclosures with slot mapping information.
	\|-		\|-
	\| [[~~Ceph~~ Encryption Bypass\|<code>qs_encryption_bypass.conf</code>]] \|\| List of devices that should be excluded from encryption checks.		\| [[Encryption Bypass\|<code>qs_encryption_bypass.conf</code>]] \|\| List of devices that should be excluded from encryption checks.
	\|-		\|-
	\| <code>qs_endpoint_security.conf</code> \|\| Configuration parameters for endpoint security settings.		\| <code>qs_endpoint_security.conf</code> \|\| Configuration parameters for endpoint security settings.

Qadmin: Link the qs_encryption_bypass.conf entry to the Ceph Encryption Bypass page, which documents the file's format and behaviour (QSTOR-12429)

2026-09-03T11:24:47Z

Link the qs_encryption_bypass.conf entry to the Ceph Encryption Bypass page, which documents the file's format and behaviour (QSTOR-12429)

← Older revision		Revision as of 11:24, 3 September 2026
Line 40:		Line 40:
	\| <code>qs_enclosure_layout.conf</code> \|\| List of supported JBOD and Server enclosures with slot mapping information.		\| <code>qs_enclosure_layout.conf</code> \|\| List of supported JBOD and Server enclosures with slot mapping information.
	\|-		\|-
	\| <code>qs_encryption_bypass.conf</code> \|\| List of devices that should be excluded from encryption checks.		\| [[Ceph Encryption Bypass\|<code>qs_encryption_bypass.conf</code>]] \|\| List of devices that should be excluded from encryption checks.
	\|-		\|-
	\| <code>qs_endpoint_security.conf</code> \|\| Configuration parameters for endpoint security settings.		\| <code>qs_endpoint_security.conf</code> \|\| Configuration parameters for endpoint security settings.

Qadmin: Link the qs_io_profiles.conf entry to its new page (QSTOR-12429)

2026-09-03T07:59:18Z

Link the qs_io_profiles.conf entry to its new page (QSTOR-12429)

← Older revision		Revision as of 07:59, 3 September 2026
Line 56:		Line 56:
	\| <code>qs_hwadapter.conf</code> \|\| configuration settings for the hwadapter manager and the individual hwadapters.		\| <code>qs_hwadapter.conf</code> \|\| configuration settings for the hwadapter manager and the individual hwadapters.
	\|-		\|-
	\| <code>qs_io_profiles.conf</code> \|\| List of disk IO profiles which may be applied to Storage Pools <small>(also honoured at its legacy path <code>/etc/</code>)</small>		\| [[qs_io_profiles.conf\|<code>qs_io_profiles.conf</code>]] \|\| List of disk IO profiles which may be applied to Storage Pools <small>(also honoured at its legacy path <code>/etc/</code>)</small>
	\|-		\|-
	\| <code>qs_ipmi.conf</code> \|\| Mapping information for IPMI discovered fans, power supplies, and system temperature information.		\| <code>qs_ipmi.conf</code> \|\| Mapping information for IPMI discovered fans, power supplies, and system temperature information.

Qadmin: Rebuild as the master index for the configuration-file program: add the qs_ prefix rule, the four-level override resolution order and why the shipped copy must not be edited, and a generated 34-row reference table sourced from the service's own registry; carry forward all 14 existing per-file notes unchanged (QSTOR-12429)

2026-09-03T07:27:18Z

Rebuild as the master index for the configuration-file program: add the qs_ prefix rule, the four-level override resolution order and why the shipped copy must not be edited, and a generated 34-row reference table sourced from the service's own registry; carry forward all 14 existing per-file notes unchanged (QSTOR-12429)

Show changes

Qadmin: Add a Related pages list, linking the new QuantaStor Touch Files page (QSTOR-12429)

2026-09-03T07:15:04Z

Add a Related pages list, linking the new QuantaStor Touch Files page (QSTOR-12429)

← Older revision		Revision as of 07:15, 3 September 2026
Line 45:		Line 45:
	==qs_volume_profiles.conf==		==qs_volume_profiles.conf==
	This contains a list of configuration settings as 'profiles' for Storage Volumes that can be applied as a Storage Volume Profile when a new Storage Volume is created or modified.		This contains a list of configuration settings as 'profiles' for Storage Volumes that can be applied as a Storage Volume Profile when a new Storage Volume is created or modified.

			== Related pages ==

			* [[QuantaStor Touch Files]] -- the empty marker files that switch a single piece of service behaviour on or off, for use only with guidance from OSNEXUS support
			* [[Storage System Optimization]] -- the supported way to change pool and system tuning
			* [[QuantaStor Shell Utilities]] -- the {{Code\|1=qs-*}} commands that read several of these files

Qadmin: /* qs_volume_profiles.conf */

2021-11-11T22:57:47Z

qs_volume_profiles.conf

← Older revision		Revision as of 22:57, 11 November 2021
Line 44:		Line 44:

	==qs_volume_profiles.conf==		==qs_volume_profiles.conf==
			This contains a list of configuration settings as 'profiles' for Storage Volumes that can be applied as a Storage Volume Profile when a new Storage Volume is created or modified.

Qadmin: /* qs_nvme_slotmap.conf */

2021-11-11T22:56:59Z

qs_nvme_slotmap.conf

← Older revision		Revision as of 22:56, 11 November 2021
Line 41:		Line 41:

	==qs_nvme_slotmap.conf==		==qs_nvme_slotmap.conf==
			This maps each NVMe/NVMeoF device pcie slot identifier to a drive slot identifier like 1, 2, 3, 4. Each vendor/model of server has a unique pcie slot map identifier set and this file is used to store those.

	==qs_volume_profiles.conf==		==qs_volume_profiles.conf==

Qadmin: /* qs_nvme_adapter.conf */

2021-11-11T22:55:49Z

qs_nvme_adapter.conf

← Older revision		Revision as of 22:55, 11 November 2021
Line 38:		Line 38:

	==qs_nvme_adapter.conf==		==qs_nvme_adapter.conf==
			NVMe devices effectively connect directly to the PCIe bus of a server motherboard rather than through an HBA like one would see with SAS and SATA media. QuantaStor creates a synthetic virtual NVMe Adapter on NVMe based servers which can then be associated with a PCIe NVMe slotmap. These in turn are mapped to an enclosure layout so that QuantaStor is able to support newer NVMe based servers and JBOFs with the same level of device correlation as we get for SAS/SATA.

	==qs_nvme_slotmap.conf==		==qs_nvme_slotmap.conf==
	==qs_volume_profiles.conf==		==qs_volume_profiles.conf==

Qadmin: /* qs_ipmi.conf */

2021-11-11T22:52:58Z

qs_ipmi.conf

← Older revision		Revision as of 22:52, 11 November 2021
Line 35:		Line 35:

	==qs_ipmi.conf==		==qs_ipmi.conf==
			The IPMI (Intelligent Platform Management Interface) standard provides QuantaStor with server platform information about system thermals, power-supplies, fans, CPUs, and other sensors. Unfortunately the identifier tags for these different pieces of information can vary by vendor as there is very little standardization of the tags. This configuration file helps to normalize the vendors so that QuantaStor can monitor hardware from a broad spectrum of manufacturers and generations of hardware.

	==qs_nvme_adapter.conf==		==qs_nvme_adapter.conf==
	==qs_nvme_slotmap.conf==		==qs_nvme_slotmap.conf==
	==qs_volume_profiles.conf==		==qs_volume_profiles.conf==

Qadmin: /* qs_hwadapter.conf */

2021-11-11T22:49:51Z

qs_hwadapter.conf

← Older revision		Revision as of 22:49, 11 November 2021
Line 32:		Line 32:

	==qs_hwadapter.conf ==		==qs_hwadapter.conf ==
			QuantaStor has internal hardware integration modules to support most of the major HBAs and RAID controllers and this configuration file indicates which version of the vendor CLI to use. HBAs are used for Storage Pool devices and RAID controllers are generally only used for boot devices.

	==qs_ipmi.conf==		==qs_ipmi.conf==
	==qs_nvme_adapter.conf==		==qs_nvme_adapter.conf==
	==qs_nvme_slotmap.conf==		==qs_nvme_slotmap.conf==
	==qs_volume_profiles.conf==		==qs_volume_profiles.conf==