Storage Pool Identify - Revision history

Qadmin: Redirect this dialog help page to the Administrator Guide section that documents it (QSTOR-12352). These pages were generated and contain unverified detail; the Help button URL is unchanged, so deployed appliances now land on verified content.

2026-09-04T05:21:42Z

Redirect this dialog help page to the Administrator Guide section that documents it (QSTOR-12352). These pages were generated and contain unverified detail; the Help button URL is unchanged, so deployed appliances now land on verified content.

← Older revision		Revision as of 05:21, 4 September 2026
Line 1:		Line 1:
	[[~~File:~~Storage ~~Pool Identify.jpg\|512px\|thumb\|Identify a specific disk device associated with a hardware RAID controller within the storage system.]]~~		#REDIRECT [[Storage Pools#Creating a Storage Pool]]

	The "Identify Hardware Controller Disk Device" feature in QuantaStor serves the purpose of visually identifying a specific disk device associated with a hardware RAID controller within the storage system. The identify dialog makes it easy to identify disk devices within an enclosure which are associated with the selected pool. The LED lights will flash for the selected duration and the identification logic is integrated with the HBA's SES services which will typically blink the drives in a pattern or use a special LED to identify the devices. LED color and pattern are specific to different vendors so it is good to experiment with the identify function when deploying new models of disk expansion units/JBOD or server enclosures.

	~~Here's why you might use it:~~

	*Physical Location: In storage environments with multiple disk enclosures or storage shelves, identifying individual disk devices can be challenging, especially during maintenance or troubleshooting activities. The "Identify Hardware Controller Disk Device" feature helps pinpoint the physical location of a specific disk device by activating a visual indicator, such as an LED, on the corresponding disk drive.

	*Disk Replacement: When replacing a failed or faulty disk drive in a RAID array, administrators can use this feature to identify the exact disk device that needs to be replaced. By activating the indicator light on the failed disk, administrators can quickly locate and replace the disk without disrupting the operation of the storage system.

	*Diagnosis and Troubleshooting: During diagnostic procedures or troubleshooting tasks, administrators may need to identify specific disk devices to isolate issues, verify connectivity, or diagnose performance problems. The "Identify Hardware Controller Disk Device" feature assists in identifying the correct disk for further inspection or analysis.

	*Configuration Verification: After installing new disk drives or expanding storage capacity, administrators can use this feature to verify the correct installation and connectivity of the newly added disks. By activating the indicator lights on the newly installed disks, administrators can ensure that the disks are recognized by the RAID controller and properly integrated into the storage system.

	*Maintenance Activities: During routine maintenance activities, such as disk reseating, cable reconnections, or firmware upgrades, administrators may need to identify specific disk devices to ensure proper handling and maintenance procedures. The "Identify Hardware Controller Disk Device" feature facilitates these activities by providing a ~~visual indication of the disks involved.~~

	*Ease of Use: By providing a simple and intuitive way to identify disk devices, the feature enhances the overall user experience and reduces the time and effort required for storage management tasks. Administrators can quickly locate and identify disk devices without relying on manual documentation or guesswork, streamlining administrative workflows and improving productivity.

	Overall, the purpose of the "Identify Hardware Controller Disk Device" feature in QuantaStor is to assist administrators in visually identifying specific disk devices associated with hardware RAID controllers within the storage system, facilitating maintenance, troubleshooting, and management activities.


	~~'''Navigation:''' Storage Management --> Storage Pools -->~~ Storage Pool ~~--> Identify ''(toolbar)''~~



	~~{{Template:ReturnToWebGuide}}~~
	~~[[Category:QuantaStor6]]~~
	~~[[Category:WebUI Dialog]]~~
	~~[[Category:Requires Review~~]]

Qadmin at 19:00, 14 May 2024

2024-05-14T19:00:07Z

← Older revision		Revision as of 19:00, 14 May 2024
Line 1:		Line 1:
	The identify dialog makes it easy to identify disk devices within an enclosure which are associated with the selected pool. The LED lights will flash for the selected duration and the identification logic is integrated with the HBA's SES services which will typically blink the drives in a pattern or use a special LED to identify the devices. LED color and pattern are specific to different vendors so it is good to experiment with the identify function when deploying new models of disk expansion units/JBOD or server enclosures.		[[File:Storage Pool Identify.jpg\|512px\|thumb\|Identify a specific disk device associated with a hardware RAID controller within the storage system.]]

			The "Identify Hardware Controller Disk Device" feature in QuantaStor serves the purpose of visually identifying a specific disk device associated with a hardware RAID controller within the storage system. The identify dialog makes it easy to identify disk devices within an enclosure which are associated with the selected pool. The LED lights will flash for the selected duration and the identification logic is integrated with the HBA's SES services which will typically blink the drives in a pattern or use a special LED to identify the devices. LED color and pattern are specific to different vendors so it is good to experiment with the identify function when deploying new models of disk expansion units/JBOD or server enclosures.

			Here's why you might use it:

			*Physical Location: In storage environments with multiple disk enclosures or storage shelves, identifying individual disk devices can be challenging, especially during maintenance or troubleshooting activities. The "Identify Hardware Controller Disk Device" feature helps pinpoint the physical location of a specific disk device by activating a visual indicator, such as an LED, on the corresponding disk drive.

			*Disk Replacement: When replacing a failed or faulty disk drive in a RAID array, administrators can use this feature to identify the exact disk device that needs to be replaced. By activating the indicator light on the failed disk, administrators can quickly locate and replace the disk without disrupting the operation of the storage system.

			*Diagnosis and Troubleshooting: During diagnostic procedures or troubleshooting tasks, administrators may need to identify specific disk devices to isolate issues, verify connectivity, or diagnose performance problems. The "Identify Hardware Controller Disk Device" feature assists in identifying the correct disk for further inspection or analysis.

			*Configuration Verification: After installing new disk drives or expanding storage capacity, administrators can use this feature to verify the correct installation and connectivity of the newly added disks. By activating the indicator lights on the newly installed disks, administrators can ensure that the disks are recognized by the RAID controller and properly integrated into the storage system.

			*Maintenance Activities: During routine maintenance activities, such as disk reseating, cable reconnections, or firmware upgrades, administrators may need to identify specific disk devices to ensure proper handling and maintenance procedures. The "Identify Hardware Controller Disk Device" feature facilitates these activities by providing a visual indication of the disks involved.

			*Ease of Use: By providing a simple and intuitive way to identify disk devices, the feature enhances the overall user experience and reduces the time and effort required for storage management tasks. Administrators can quickly locate and identify disk devices without relying on manual documentation or guesswork, streamlining administrative workflows and improving productivity.

			Overall, the purpose of the "Identify Hardware Controller Disk Device" feature in QuantaStor is to assist administrators in visually identifying specific disk devices associated with hardware RAID controllers within the storage system, facilitating maintenance, troubleshooting, and management activities.


	'''Navigation:''' Storage Management --> Storage Pools --> Storage Pool --> Identify ''(toolbar)''		'''Navigation:''' Storage Management --> Storage Pools --> Storage Pool --> Identify ''(toolbar)''

	~~[[File:qs_storage_pool_identify.png]]~~


	{{Template:ReturnToWebGuide}}		{{Template:ReturnToWebGuide}}
	[[Category:~~QuantaStor4~~]]		[[Category:QuantaStor6]]
	[[Category:WebUI Dialog]]		[[Category:WebUI Dialog]]
	[[Category:Requires Review]]		[[Category:Requires Review]]

Qadmin at 00:03, 20 July 2018

2018-07-20T00:03:57Z

← Older revision		Revision as of 00:03, 20 July 2018
Line 1:		Line 1:
	The identify dialog makes it easy to identify disk devices within an enclosure which are associated with the selected pool. The LED lights will flash for the selected duration and the identification logic is integrated with the HBA's SES services which will typically blink the drives in a pattern or use a special LED to identify the devices. LED color and pattern are specific to different vendors so it is good to experiment with the identify function when deploying new models of disk expansion units/JBOD or server enclosures.		The identify dialog makes it easy to identify disk devices within an enclosure which are associated with the selected pool. The LED lights will flash for the selected duration and the identification logic is integrated with the HBA's SES services which will typically blink the drives in a pattern or use a special LED to identify the devices. LED color and pattern are specific to different vendors so it is good to experiment with the identify function when deploying new models of disk expansion units/JBOD or server enclosures.

			'''Navigation:''' Storage Management --> Storage Pools --> Storage Pool --> Identify ''(toolbar)''

	[[File:qs_storage_pool_identify.png]]		[[File:qs_storage_pool_identify.png]]

Qadmin at 23:10, 28 February 2017

2017-02-28T23:10:58Z

← Older revision		Revision as of 23:10, 28 February 2017
Line 1:		Line 1:
	~~Flash~~ the LED lights for the ~~hard disk drive~~ which the ~~Pools reside upon~~.		The identify dialog makes it easy to identify disk devices within an enclosure which are associated with the selected pool. The LED lights will flash for the selected duration and the identification logic is integrated with the HBA's SES services which will typically blink the drives in a pattern or use a special LED to identify the devices. LED color and pattern are specific to different vendors so it is good to experiment with the identify function when deploying new models of disk expansion units/JBOD or server enclosures.

Qadmin at 23:07, 28 February 2017

2017-02-28T23:07:54Z

← Older revision		Revision as of 23:07, 28 February 2017
Line 2:		Line 2:


	[[File:~~Identify Strg Pool~~.~~jpg~~]]		[[File:qs_storage_pool_identify.png]]

Qadmin at 22:29, 17 November 2016

2016-11-17T22:29:44Z

← Older revision		Revision as of 22:29, 17 November 2016
Line 1:		Line 1:
	~~'''TBD'''~~		Flash the LED lights for the hard disk drive which the Pools reside upon.


Line 6:		Line 6:

	{{Template:ReturnToWebGuide}}		{{Template:ReturnToWebGuide}}
	~~[[Category:Incomplete]]~~
	[[Category:QuantaStor4]]		[[Category:QuantaStor4]]
	[[Category:WebUI Dialog]]		[[Category:WebUI Dialog]]
			[[Category:Requires Review]]

Qadmin: Created page with "'''TBD''' File:Identify Strg Pool.jpg {{Template:ReturnToWebGuide}} Category:Incomplete Category:QuantaStor4 Category:WebUI Dialog"

2016-10-19T18:29:48Z

Created page with "'''TBD''' File:Identify Strg Pool.jpg {{Template:ReturnToWebGuide}} Category:Incomplete Category:QuantaStor4 Category:WebUI Dialog"

New page

'''TBD'''

[[File:Identify Strg Pool.jpg]]

{{Template:ReturnToWebGuide}}
[[Category:Incomplete]]
[[Category:QuantaStor4]]
[[Category:WebUI Dialog]]