Difference between revisions of "+ Getting Started Overview"

From OSNEXUS Online Documentation Site
Jump to: navigation, search
m
m
Line 2: Line 2:
  
 
The setup process in the product is currently contained within the [[Configuration Workflow Manager]]. <br>
 
The setup process in the product is currently contained within the [[Configuration Workflow Manager]]. <br>
[[File:Storage Sys Ribbon.jpg]]
+
[[File:Storage Sys Ribbon.jpg | 700px | Getting Started Ribbon]]
  
 
The default administrator user name for your storage system is simply 'admin' and this user name will automatically appear in the username field of the login screen.  The password for the 'admin' account is initially just 'password' without the quotes.  You will want to change this after you first login and it is included in the Workflow Manager.
 
The default administrator user name for your storage system is simply 'admin' and this user name will automatically appear in the username field of the login screen.  The password for the 'admin' account is initially just 'password' without the quotes.  You will want to change this after you first login and it is included in the Workflow Manager.

Revision as of 13:54, 21 November 2018

This guide assumes that you have already installed QuantaStor and have successfully logged into QuantaStor Manager. If you have not yet installed the QuantaStor SDS software on your server, please see the Installation Guide for more details. For a full guide to the web interface see the QuantaStor Administrators Guide.

The setup process in the product is currently contained within the Configuration Workflow Manager.
Getting Started Ribbon

The default administrator user name for your storage system is simply 'admin' and this user name will automatically appear in the username field of the login screen. The password for the 'admin' account is initially just 'password' without the quotes. You will want to change this after you first login and it is included in the Workflow Manager.

Basic Setup

The steps covered here will be necessary to set up your storage system.

Getting Started/Configuration Guide

Add License

Once QuantaStor has been installed, the first step is to enter your license key block. Your license key block can be entered using the Add License button in the Workflow Manager or using the License Manager dialog which is accessed by pressing the License Manager button in the toolbar.

Add License

The key block you received via email is contained within markers like so:

--------START KEY BLOCK--------

---------END KEY BLOCK--------- 

Note that when you add the key using the 'Add License' dialog you can choose whether or not to include the START/END KEY BLOCK markers, though it makes no difference.

For more information on the license, refer to the Storage System License Add page.

Activate License

Once your key block has been entered you'll want to activate your key which can be done in one of two ways. If the new QuantaStor system is connected to the network, the activation can be completed in just a few seconds using the Activate License Online button in the Workflow Manager. The Activate Online button in the License Manager functions the same way.

Activate License

If your storage system is not connected to the internet select the Activate via Email button in the License Manager and send the required information to support@osnexus.com. You have a 7 day grace period for license activation, so you can begin configuring and utilizing the system even if the system is not yet activated. If you do not activate the license within 7 days, the storage system will no longer allow any additional configuration changes until an activation key is supplied.

For more information on the license activation, refer to the Storage System License Activate Online page.

Change/Set Admin Password

For security, you will want to create a secure password for your storage system. This can be completed quickly using the Change Admin Password button in the Manager, but also can be achieved via the Set Password button in the toolbar under "Users & Groups".

Set Password

For more information on the password, refer to the User Set Password page.

Network Configuration

You will want to configure the ports on your storage system. This can be completed quickly using the Network Configuration button in the Manager, but also can be found via right-clicking inside the Network Ports tab, visible when "Storage System" is selected under "Storage Management".

Configure Network

For more information on the password, refer to the Network Port Modify page.

Block Storage Provisioning (iSCSI/FC)

This section will cover the creation of storage volumes and user groups, and allocation of these storage volumes to these groups.

Create Storage Pools

To create your first storage pool via the Workflow Manager, switch to the Block Storage Provisioning tab within Workflow Manager and click on the Create Storage Pool button. If you select RAID0 for raid type, then the pool will be ready immediately but won't be fault tolerant. Most likely, you will want to replace it with a RAID6 or RAID10 storage pool before you start writing important data to the storage system.

Create Storage Pool

Once you have created a storage pool it will take some time to 'rebuild'. Once the 'rebuild' process has reached 1% you will see the storage pool appear in QuantaStor Manager and you can begin to create new storage volumes.

WARNING: Although you can begin using the pool at 1% rebuild completion, your storage pool is not fault-tolerant until the rebuild process has completed.

For more information on storage pools, RAID levels and storage pool options refer to the Create Storage Pool page and the Administrators Guide.

Create Volume

After you have created one or more storage pools you can begin creating storage volumes in them. Storage volumes are the iSCSI disks that you present to your hosts. Sometimes they're called LUNs or virtual disks, but storage volume is the generally accepted term used by the broader storage industry, and so will be used within this wiki.

You may have to wait until your storage pool is 1% complete with its synchronization before you can start to create storage volumes.

To create your storage volumes, click the Create Volume button in the Workflow Manager or the Create button on the toolbar under the "Storage Volumes" tab of "Storage Management". When the dialog appears, give your storage volume a name, select the size of the volume you want to create using the slider bar, and press OK.

Create Storage Volume

For more information, refer to the Storage Volume Create page and the Administrators Guide.

Adding Hosts

The host object represents a server, desktop, virtual machine or any other entity that you want to provide storage to. Each host is only allowed to see the storage volumes that you have assigned to them. The industry term for this is called "LUN Masking" but in for this wiki we will refer to it simply as "storage assignment".

To add a host to the system, click the Add Host button in the Workflow Manager or the Create button on the toolbar under the "Hosts" tab of "Storage Management". You will be asked to enter a name, IP address and/or IQN for your new host. We highly recommend that you always identify your hosts by IQN as it makes it easier to manage your hosts. Once you've entered a host name and its IQN press OK to have the host created.

Create Hosts

For more information, refer to the Host Add page.

Assigning Storage Volumes to Hosts

Now you're ready to assign the volumes you created to your hosts. In the Workflow Manager, this is covered by the Assign Volume(s) button. You can also assign them by using the "Assign" tool, under the "Storage Volumes" and the "Hosts" tab.

Assign Volumes to Hosts

Note: A given volume can be assigned to more than one host at the same time, but keep in mind that you need to have software or a file-system than can handle the concurrent access such as a cluster file system or similar cluster aware application.

Once you've selected your host and volume, press OK. Under the "Hosts" tab, you should now see your selected volumes in a dropdown menu below the host.

For more information, refer to the Storage Volume Assign page.

File Storage Provisioning (iSCSI/FC)

Create Storage Pools

This step is identical to the one of the same name in the Block Storage Provisioning step.

Create Storage Pool

For more information, refer to the Create Storage Pool page.

Setup Active Directory (Optional)

This step works with Microsoft Active Directory to assign network shares to users and groups. Set up Active Directory using the Setup Active Directory button in Workflow Manager, or click on the button Configure Active Directory in the toolbar under "Network Share" in "Storage Management".

Setup Active Directory

For more information, refer to the Network Share Configure CIFS page.

Create Network Share

This creates a folder within a selected storage pool. Click on the Create Network Share button in Workflow Manager, or the Create button in "Network Share".

Create Network Share

For more information, refer to the Network Share Configure CIFS page.

Add NFS Client Access

Creates additional client access for the network share. Click on the Add NFS Client Access button in Workflow Manager, or rightclick on the target network share under "Network Share" and click "Add NFS Access".

Add NFS Access

For more information, refer to the Add NFS Client Access page.

Modify SMB Access

Lets you control the network share's settings such as compression, quotas, and sync policies. Click on the Modify Network Share button in Workflow Manager, or the Modify button under "Network Share".

Modify Network Share

For more information, refer to the Modify Network Share page.

Storage Grid Setup

Create Storage Grid

Storage grids, also known as management grids, let you manage multiple storage appliance within the same system. Each appliance can only be part of one management grid. In Workflow Manager, switch to the "Storage Grid Setup" tab and click on the Create Storage Grid button, or rightclick on "Storage System" and select "Create Management Grid".

Create Storage Grid

For more information, refer to the Create Management Grid page.

Add Storage System to Grid

Adds other storage systems to your storage grid, called "nodes". Click on the Add Storage System to Grid button in Workflow Manager, or rightclick on "Storage System" and select "Add Grid Node".

Add Storage Node

For more information, refer to the Add Management Grid page.