Difference between revisions of "+ Getting Started Overview"

From OSNEXUS Online Documentation Site
Jump to: navigation, search
m (Network Configuration)
Line 12: Line 12:
 
For more information on the password, refer to the [[User Set Password]] page.
 
For more information on the password, refer to the [[User Set Password]] page.
  
=== Network Configuration ===
+
== Step by Step Configuration Procedure ==  
The most common initial configuration step is to apply static IP addresses to your network ports.  QuantaStor will initially get an IP address from your DHCP server but this is intended only to assist with the initial setup and installation process.  DHCP allocated IP addresses can change so they're not to be used with your storage system unless you've statically assigned DHCP addresses. Even then we don't recommend the use of DHCP as your system needs to be able to boot even if the DHCP server is offline or inaccessible.
+
 
+
This can be completed quickly using the [[Network Port Modify | Network Configuration]] button in the Manager, but also can be found via right-clicking inside the ''Network Ports'' tab, visible when "Storage System" is selected under "Storage Management".
+
 
+
[[File:Basic Setup Net Cnfg.jpg | 512px | Network Configuration]]
+
 
+
For more information on the password, refer to the [[Network Port Modify]] page.
+
 
+
 
+
  
 
The setup process in the product is currently contained within the [[Configuration Workflow Manager]]. <br>
 
The setup process in the product is currently contained within the [[Configuration Workflow Manager]]. <br>
Line 28: Line 19:
 
[[File:Configuration Guide.jpg  | 500px | Getting Started/Configuration Guide]]
 
[[File:Configuration Guide.jpg  | 500px | Getting Started/Configuration Guide]]
  
[[License Management]]
+
=== [[License Management]] ===
Start by adding license keys (one for each QuantaStor server) if they've not already been applied to the systems.
+
Start by adding license keys (one for each QuantaStor server) if they've not already been applied to the systems. Many configuration steps cannot be done until a license key has been applied to each system.
 +
 
 +
=== [[Network Configuration]] ===
 +
Set static IP addresses on each of your systems
  
[[Grid Configuration]]
+
=== [[Grid Configuration]] ===
 
Combine systems together to form a storage grid.  This enables a whole host of additional features including remote-replication, clustering and more.
 
Combine systems together to form a storage grid.  This enables a whole host of additional features including remote-replication, clustering and more.
  
[[File Storage Provisioning]]
+
=== [[File Storage Provisioning]] ===
 
If your primary use case is to setup your QuantaStor as NAS filer, start here to learn how to provision Network Shares.
 
If your primary use case is to setup your QuantaStor as NAS filer, start here to learn how to provision Network Shares.
  
[[Block Storage Provisioning]]
+
=== [[Block Storage Provisioning]] ===
 
If your primary use case is to setup your QuantaStor as a SAN, start here to learn how to provision Storage Volumes.
 
If your primary use case is to setup your QuantaStor as a SAN, start here to learn how to provision Storage Volumes.
  
[[Object Storage Setup]]
+
=== [[Object Storage Setup]] ===
 
If your primary use case is to setup an object storage cluster with 3x or more QuantaStor servers, start here.
 
If your primary use case is to setup an object storage cluster with 3x or more QuantaStor servers, start here.
  

Revision as of 20:44, 20 March 2019

This guide assumes that you have already installed QuantaStor and have successfully logged into QuantaStor Manager. If you have not yet installed QuantaStor on your server, please see the Installation Guide for more details.

First Time Login

The default administrator user name for your storage system is simply 'admin'. This user account is present on all QuantaStor systems. At the login dialog the admin user account name is pre-populated as this is the most commonly used login. If QuantaStor was installed for you by a CSP or VAR the password for the system(s) should have been emailed to you or made available via the CSPs server management panel. If you've installed QuantaStor on a new server or VM the 'admin' account defaults to having a password of 'password' (without the single quotes). IMPORTANT: Please change this immediately after you first login via the Users & Groups section.

Change Administrator Password

For security, you will want to create a secure password for your storage system. This can be completed quickly using the Change Admin Password button in the Manager, but also can be achieved via the Set Password button in the toolbar under "Users & Groups".

Change Administrator Password

For more information on the password, refer to the User Set Password page.

Step by Step Configuration Procedure

The setup process in the product is currently contained within the Configuration Workflow Manager.
Getting Started Ribbon

Getting Started/Configuration Guide

License Management

Start by adding license keys (one for each QuantaStor server) if they've not already been applied to the systems. Many configuration steps cannot be done until a license key has been applied to each system.

Network Configuration

Set static IP addresses on each of your systems

Grid Configuration

Combine systems together to form a storage grid. This enables a whole host of additional features including remote-replication, clustering and more.

File Storage Provisioning

If your primary use case is to setup your QuantaStor as NAS filer, start here to learn how to provision Network Shares.

Block Storage Provisioning

If your primary use case is to setup your QuantaStor as a SAN, start here to learn how to provision Storage Volumes.

Object Storage Setup

If your primary use case is to setup an object storage cluster with 3x or more QuantaStor servers, start here.

Storage Grid Setup

Create Storage Grid...

Storage grids, also known as management grids, let you manage multiple storage appliance within the same system. Each appliance can only be part of one management grid. In Workflow Manager, switch to the "Storage Grid Setup" tab and click on the Create Storage Grid button, or rightclick on "Storage System" and select "Create Management Grid".

Create Storage Grid...

For more information, refer to the Create Management Grid page.

Adding Storage Systems

Adds other storage systems to your storage grid, called "nodes". Click on the Add Storage System to Grid button in Workflow Manager, or rightclick on "Storage System" and select "Add Grid Node".

Add System...

For more information, refer to the Add Management Grid page.


Return to the QuantaStor Web Admin Guide