Difference between revisions of "+ Getting Started Overview"

From OSNEXUS Online Documentation Site
Jump to: navigation, search
m
m (Step by Step Configuration Procedure)
Line 15: Line 15:
  
 
== Step by Step Configuration Procedure ==
 
== Step by Step Configuration Procedure ==
===[[File:Getting Stared Welcome.jpg|512px|Getting Started]]===
+
 
 +
===[[QuantaStor_Getting_Started_Guide|Additional information for Getting Started dialog.]]===
 +
 
 +
[[File:Getting Stared Welcome.jpg|512px|Getting Started]]
 +
 
 
With your first login, the Getting Started dialog will give you step by step guidance to set up your desired Storage System.
 
With your first login, the Getting Started dialog will give you step by step guidance to set up your desired Storage System.
  
Line 25: Line 29:
 
[[File:Getting Started Ribbon Bar.jpg|512px]]
 
[[File:Getting Started Ribbon Bar.jpg|512px]]
  
[[QuantaStor_Getting_Started_Guide|Additional information for Getting Started dialog.]]
 
  
 
=== [[Grid_Configuration|Grid Configuration]] ===
 
=== [[Grid_Configuration|Grid Configuration]] ===

Revision as of 14:26, 20 September 2019

This guide begins from the point that you have installed QuantaStor and have successfully logged into QuantaStor Manager. If you have not yet installed QuantaStor on your server, please see the Installation Guide for more details.

First Time Login

The default administrator user name for your storage system is simply 'admin'. This user account is present on all QuantaStor systems. At the login dialog the admin user account name is pre-populated as this is the most commonly used login. If QuantaStor was installed for you by a CSP or VAR the password for the system(s) should have been emailed to you or made available via the CSPs server management panel. If you've installed QuantaStor on a new server or VM the 'admin' account defaults to having a password of 'password' (without the single quotes). IMPORTANT: Please change this immediately after you first login via the Users & Groups section.

Change Administrator Password

Change the Administrator's Password.

For security, you will want to create a secure password for your storage system. This can be completed quickly using the Change Admin Password button in the Manager, but also can be achieved via the Set Password button in the toolbar under "Users & Groups".


For more information on the password, refer to the User Set Password page.

Step by Step Configuration Procedure

Additional information for Getting Started dialog.

Getting Started

With your first login, the Getting Started dialog will give you step by step guidance to set up your desired Storage System.


Thereafter you will have to go to the toolbar for the Getting Started dialog.

Navigation: Storage Management --> Storage System --> Storage System --> Getting Started (toolbar)

Getting Started Ribbon Bar.jpg


Grid Configuration

Combine systems together to form a storage grid.
This enables a whole host of additional features including remote-replication, clustering and more.

Scale-out Block Storage Setup

Storage pools formed from devices which are dual-connected to two storage systems may be made highly-available. This is done by creating a storage pool high-availability group to which one or more virtual network interfaces (VIFs) are added. All access to storage pools must be done via the associated VIFs to ensure continuous data availability in the event the pool is moved (failed-over) to another system.

Scale-out File Storage Setup

Scale-out S3 Object Storage Setup

If your primary use case is to setup an object storage cluster with 3x or more QuantaStor servers, start here.

Provisioning File Storage

If your primary use case is to setup your QuantaStor as NAS filer, start here to learn how to provision Network Shares.

Provisioning Block Storage

If your primary use case is to setup your QuantaStor as a SAN, start here to learn how to provision Storage Volumes.

Remote-Replication Setup

Return to the QuantaStor Web Admin Guide