FC Target Port Enable

From OSNEXUS Online Documentation Site
Revision as of 16:16, 23 July 2018 by Qadmin (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

When a FC target port is disabled it is switched to initiator mode. When enabled it is switched to target mode. Additionally ports may be set to be in both initiator and target mode at the same time. This dual-mode FC configuration article has information on how to set it up.

Navigation: Storage Management --> Storage System --> (target FC target port) --> Disable FC Initiator Mode (rightclick)

Enable FC Target Port.png


Return to the QuantaStor Web Admin Guide