Difference between revisions of "Hardware Disk Identify"

From OSNEXUS Online Documentation Site
Jump to: navigation, search
m
m
Line 1: Line 1:
 
Communicates with the controller to make the hard drive LED blink so that the disk can be identified in the enclosure.  With most manufacturers the red LED on the enclosure blinks to identify the drive in a specific pattern.  Note that the pattern used to identify hotspares is different and usually a solid red light is used to identify bad drives.
 
Communicates with the controller to make the hard drive LED blink so that the disk can be identified in the enclosure.  With most manufacturers the red LED on the enclosure blinks to identify the drive in a specific pattern.  Note that the pattern used to identify hotspares is different and usually a solid red light is used to identify bad drives.
  
 +
'''Navigation:''' Storage Management --> Controllers & Enclosures --> Identify ''(rightclick)''
  
 
[[File:ID Hardware Controller.jpg]]
 
[[File:ID Hardware Controller.jpg]]

Revision as of 16:28, 19 July 2018

Communicates with the controller to make the hard drive LED blink so that the disk can be identified in the enclosure. With most manufacturers the red LED on the enclosure blinks to identify the drive in a specific pattern. Note that the pattern used to identify hotspares is different and usually a solid red light is used to identify bad drives.

Navigation: Storage Management --> Controllers & Enclosures --> Identify (rightclick)

ID Hardware Controller.jpg


Return to the QuantaStor Web Admin Guide