Difference between revisions of "Physical Disk Identify"

From OSNEXUS Online Documentation Site
Jump to: navigation, search
m
m
(12 intermediate revisions by the same user not shown)
Line 1: Line 1:
TBD
+
[[File:Identify Phy Disk.jpg|thumb|512px|The physical disk LED for the selected disk to flash on and off in a pattern so that the disk may be easily identified in the enclosure.]]
  
[[File:Identify Disk.jpg]]
+
Generates IO activity on the disk by reading data in order to make the drive LED pulse on/off every 2 seconds.  This can help identify a disk drive in the chassis<br>
 +
'''Note:''' for hardware RAID units and disks there are separate identification operations available under the Hardware Enclosure & Controllers section.
 +
 
 +
 
 +
'''Navigation:''' Storage Management --> Physical Disks --> Physical Disk --> Identify ''(toolbar)''
 +
 
 +
<br><br><br><br><br>
 +
 
 +
 
 +
{{Template:ReturnToWebGuide}}
 +
[[Category:QuantaStor5]]
 +
[[Category:WebUI Dialog]]

Revision as of 18:06, 16 January 2020

The physical disk LED for the selected disk to flash on and off in a pattern so that the disk may be easily identified in the enclosure.

Generates IO activity on the disk by reading data in order to make the drive LED pulse on/off every 2 seconds. This can help identify a disk drive in the chassis
Note: for hardware RAID units and disks there are separate identification operations available under the Hardware Enclosure & Controllers section.


Navigation: Storage Management --> Physical Disks --> Physical Disk --> Identify (toolbar)







Return to the QuantaStor Web Admin Guide