View source for QuantaStor REST API v4.2, v4.1

=== aclAdd API ===
Enables access to the specific volume for a specific user.

==== Argument List ====

<code>
    ownerId: <string>
    ownerType: <unsignedInt>
    objectId: <string>
    objectType: <unsignedInt>
    accessLevel: <unsignedInt>
    flags: <unsignedInt>
</code>

=== aclModify API ===
Modifies the current acl assignment.

==== Argument List ====

<code>
    ownerId: <string>
    ownerType: <unsignedInt>
    objectId: <string>
    objectType: <unsignedInt>
    accessLevel: <unsignedInt>
    flags: <unsignedInt>
</code>

=== aclRemove API ===
Removes the acl assignment.

==== Argument List ====

<code>
    ownerId: <string>
    ownerType: <unsignedInt>
    objectId: <string>
    objectType: <unsignedInt>
    flags: <unsignedInt>
</code>

=== activeDirectoryUserAndGroupEnum API ===

==== Argument List ====

<code>
    storageSystemId: <string>
    networkShareId: <string>
    groupFilter: <string>
    userFilter: <string>
    refreshCache: <boolean>
    flags: <unsignedInt>
</code>

=== alertClear API ===
Deletes the alert with the specified ID.

==== Argument List ====

<code>
    id: <string>
    flags: <unsignedInt>
</code>

=== alertClearAll API ===
Clears all the alerts.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== alertConfigGet API ===
Alert configuration settings indicate where alert notifications should be sent.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== alertConfigSet API ===
Sets the alert configuration settings such as the administrator email address.

==== Argument List ====

<code>
    senderEmailAddress: <string>
    smtpServerIpAddress: <string>
    smtpUsername: <string>
    smtpPassword: <string>
    smtpAuthType: <unsignedInt>
    customerSupportEmailAddress: <string>
    poolFreeSpaceWarningThreshold: <unsignedInt>
    poolFreeSpaceAlertThreshold: <unsignedInt>
    poolFreeSpaceCriticalAlertThreshold: <unsignedInt>
    pagerDutyServiceKey: <string>
    flags: <unsignedInt>
</code>

=== alertEnum API ===
Returns a list of all the alerts.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== alertGet API ===
Gets information about a specific alert.

==== Argument List ====

<code>
    id: <string>
    flags: <unsignedInt>
</code>

=== alertRaise API ===
Allows one to raise a user generated alert for testing the SMTP server configuration settings.

==== Argument List ====

<code>
    message: <string>
    severity: <unsignedInt>
    flags: <unsignedInt>
</code>

=== auditLogClear API ===
Clears the audit log.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== auditLogDisable API ===
Disables the audit log

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== auditLogEnable API ===
Enables the audit log.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== auditLogGet API ===
Get an entry from the audit log.

==== Argument List ====

<code>
    user: <string>
    startDate: <dateTime>
    endDate: <dateTime>
    flags: <unsignedInt>
</code>

=== backupJobCancel API ===

==== Argument List ====

<code>
    backupJob: <string>
    flags: <unsignedInt>
</code>

=== backupJobEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== backupJobGet API ===

==== Argument List ====

<code>
    backupJob: <string>
    flags: <unsignedInt>
</code>

=== backupJobStart API ===

==== Argument List ====

<code>
    backupPolicy: <string>
    flags: <unsignedInt>
</code>

=== backupJobStatusUpdate API ===

==== Argument List ====

<code>
    statusXml: <string>
    flags: <unsignedInt>
</code>

=== backupPolicyCreate API ===

==== Argument List ====

<code>
    name: <string>
    description: <string>
    networkShareId: <string>
    remoteHostname: <string>
    remoteExportPath: <string>
    remoteMountType: <unsignedInt>
    daysOfWeek: <unsignedInt>
    hoursOfDay: <unsignedInt>
    retentionCriteria: <unsignedInt>
    startDate: <dateTime>
    policyType: <unsignedInt>
    scanThreads: <unsignedInt>
    retentionDays: <unsignedInt>
    purgePolicy: <unsignedInt>
    createBackupLogs: <boolean>
    backupToShareRoot: <boolean>
    setEnabled: <boolean>
    scheduleType: <unsignedInt>
    delayInterval: <unsignedInt>
    flags: <unsignedInt>
</code>

=== backupPolicyDelete API ===

==== Argument List ====

<code>
    backupPolicy: <string>
    flags: <unsignedInt>
</code>

=== backupPolicyDisable API ===

==== Argument List ====

<code>
    backupPolicy: <string>
    flags: <unsignedInt>
</code>

=== backupPolicyEnable API ===

==== Argument List ====

<code>
    backupPolicy: <string>
    flags: <unsignedInt>
</code>

=== backupPolicyEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== backupPolicyGet API ===

==== Argument List ====

<code>
    backupPolicy: <string>
    flags: <unsignedInt>
</code>

=== backupPolicyModify API ===

==== Argument List ====

<code>
    backupPolicy: <string>
    name: <string>
    description: <string>
    networkShareId: <string>
    remoteHostname: <string>
    remoteExportPath: <string>
    remoteMountType: <unsignedInt>
    daysOfWeek: <unsignedInt>
    hoursOfDay: <unsignedInt>
    retentionCriteria: <unsignedInt>
    startDate: <dateTime>
    policyType: <unsignedInt>
    scanThreads: <unsignedInt>
    retentionDays: <unsignedInt>
    purgePolicy: <unsignedInt>
    createBackupLogs: <boolean>
    backupToShareRoot: <boolean>
    setEnabled: <boolean>
    scheduleType: <unsignedInt>
    delayInterval: <unsignedInt>
    flags: <unsignedInt>
</code>

=== backupPolicyTrigger API ===

==== Argument List ====

<code>
    backupPolicy: <string>
    flags: <unsignedInt>
</code>

=== cephBlockDeviceCreate API ===

==== Argument List ====

<code>
    name: <string>
    description: <string>
    cephPoolId: <string>
    size: <unsignedLong>
    flags: <unsignedInt>
</code>

=== cephBlockDeviceDelete API ===

==== Argument List ====

<code>
    cephBlockDevice: <string>
    flags: <unsignedInt>
</code>

=== cephBlockDeviceEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== cephBlockDeviceGet API ===

==== Argument List ====

<code>
    cephBlockDevice: <string>
    flags: <unsignedInt>
</code>

=== cephBlockDeviceModify API ===

==== Argument List ====

<code>
    cephBlockDevice: <string>
    name: <string>
    description: <string>
    flags: <unsignedInt>
</code>

=== cephBlockDeviceResize API ===

==== Argument List ====

<code>
    cephBlockDevice: <string>
    size: <unsignedLong>
    flags: <unsignedInt>
</code>

=== cephBlockDeviceSnapshot API ===

==== Argument List ====

<code>
    cephBlockDevice: <string>
    snapshotName: <string>
    snapshotDescription: <string>
    flags: <unsignedInt>
</code>

=== cephClusterEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== cephClusterGet API ===

==== Argument List ====

<code>
    cephCluster: <string>
    flags: <unsignedInt>
</code>

=== cephHaFailoverInterfaceEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== cephHaFailoverInterfaceGet API ===

==== Argument List ====

<code>
    cephPoolId: <string>
    failoverInterfaceId: <string>
    flags: <unsignedInt>
</code>

=== cephMonitorEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== cephMonitorGet API ===

==== Argument List ====

<code>
    cephMonitor: <string>
    flags: <unsignedInt>
</code>

=== cephOsdCreate API ===

==== Argument List ====

<code>
    name: <string>
    description: <string>
    cephClusterId: <string>
    storagePoolId: <string>
    weight: <unsignedInt>
    flags: <unsignedInt>
</code>

=== cephOsdDelete API ===

==== Argument List ====

<code>
    cephOsd: <string>
    deleteData: <boolean>
    flags: <unsignedInt>
</code>

=== cephOsdEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== cephOsdGet API ===

==== Argument List ====

<code>
    cephOsd: <string>
    flags: <unsignedInt>
</code>

=== cephPoolCreate API ===

==== Argument List ====

<code>
    name: <string>
    description: <string>
    placementGroupCount: <unsignedInt>
    maxReplicaCount: <unsignedInt>
    minReplicaCount: <unsignedInt>
    cephPoolType: <string>
    storagePoolList: <string[]>
    flags: <unsignedInt>
</code>

=== cephPoolDelete API ===

==== Argument List ====

<code>
    cephPool: <string>
    flags: <unsignedInt>
</code>

=== cephPoolEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== cephPoolGet API ===

==== Argument List ====

<code>
    cephPool: <string>
    flags: <unsignedInt>
</code>

=== cephPoolModify API ===

==== Argument List ====

<code>
    cephPool: <string>
    name: <string>
    description: <string>
    flags: <unsignedInt>
</code>

=== cephPoolOsdAssocEnum API ===

==== Argument List ====

<code>
    cephPool: <string>
    flags: <unsignedInt>
</code>

=== cephPoolOsdAssocGet API ===

==== Argument List ====

<code>
    cephPool: <string>
    cephOsd: <string>
    flags: <unsignedInt>
</code>

=== cloudBackupScheduleAssocEnum API ===
List the cloud backup schedule associations.

==== Argument List ====

<code>
    schedule: <string>
    flags: <unsignedInt>
</code>

=== cloudBackupScheduleAssocGet API ===
Get a cloud backup schedule association.

==== Argument List ====

<code>
    scheduleId: <string>
    storageVolumeId: <string>
</code>

=== cloudBackupScheduleCreate API ===
Creates a new schedule to automate backups to a cloud backup container.

==== Argument List ====

<code>
    name: <string>
    description: <string>
    cloudContainerId: <string>
    priority: <unsignedInt>
    setEnabled: <unsignedInt>
    startDate: <dateTime>
    maxBackups: <unsignedInt>
    daysOfWeek: <unsignedInt>
    hoursOfDay: <unsignedInt>
    storageVolumeList: <string[]>
    scheduleType: <unsignedInt>
    delayInterval: <unsignedInt>
    flags: <unsignedInt>
</code>

=== cloudBackupScheduleDelete API ===
Deletes the specified cloud backup schedule.

==== Argument List ====

<code>
    schedule: <string>
    flags: <unsignedInt>
</code>

=== cloudBackupScheduleDisable API ===
Disables a cloud backup schedule so that it does not trigger backups.

==== Argument List ====

<code>
    schedule: <string>
    flags: <unsignedInt>
</code>

=== cloudBackupScheduleEnable API ===
Enables a cloud backup schedule that was previously disabled.

==== Argument List ====

<code>
    schedule: <string>
    flags: <unsignedInt>
</code>

=== cloudBackupScheduleEnum API ===
Lists all the cloud backup schedules in the system.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== cloudBackupScheduleGet API ===
Gets detailed information about a specific cloud backup schedule.

==== Argument List ====

<code>
    schedule: <string>
    flags: <unsignedInt>
</code>

=== cloudBackupScheduleModify API ===
Modifies the settings for the specified cloud backup schedule.

==== Argument List ====

<code>
    schedule: <string>
    name: <string>
    description: <string>
    cloudContainerId: <string>
    setEnabled: <unsignedInt>
    startDate: <dateTime>
    maxBackups: <unsignedInt>
    daysOfWeek: <unsignedInt>
    hoursOfDay: <unsignedInt>
    scheduleType: <unsignedInt>
    delayInterval: <unsignedInt>
    flags: <unsignedInt>
</code>

=== cloudBackupScheduleTrigger API ===

==== Argument List ====

<code>
    schedule: <string>
    flags: <unsignedInt>
</code>

=== cloudBackupScheduleVolumeAddRemove API ===
Add/Remove storage volumes to an existing cloud backup schedule.

==== Argument List ====

<code>
    schedule: <string>
    modType: <unsignedInt>
    storageVolumeList: <string[]>
    flags: <unsignedInt>
</code>

=== cloudContainerAdd API ===
Recovers a cloud backup container that was previously removed or used with a prior installation.

==== Argument List ====

<code>
    credentialsId: <string>
    locationId: <string>
    encryptionKey: <string>
    storageUrl: <string>
    enableNfs: <boolean>
    flags: <unsignedInt>
</code>

=== cloudContainerCreate API ===
Creates a cloud backup container into which cloud backups of storage volumes can be made.

==== Argument List ====

<code>
    name: <string>
    description: <string>
    credentialsId: <string>
    locationId: <string>
    encryptionKey: <string>
    storageUrl: <string>
    enableNfs: <boolean>
    attachToStorageSystem: <string>
    flags: <unsignedInt>
</code>

=== cloudContainerDelete API ===
Deletes the specified cloud backup container. WARNING, all data in the container will be destroyed.

==== Argument List ====

<code>
    container: <string>
    flags: <unsignedInt>
</code>

=== cloudContainerDisable API ===
Disables access to the specified cloud container without having to remove it.

==== Argument List ====

<code>
    container: <string>
    flags: <unsignedInt>
</code>

=== cloudContainerEnable API ===
Enables a cloud container that was previously disabled or was inaccessible due to network connection issues.

==== Argument List ====

<code>
    container: <string>
    attachToStorageSystem: <string>
    flags: <unsignedInt>
</code>

=== cloudContainerEnum API ===
Returns a list of cloud backup containers in the system.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== cloudContainerGet API ===
Returns detailed information on a specific cloud backup container.

==== Argument List ====

<code>
    container: <string>
    flags: <unsignedInt>
</code>

=== cloudContainerModify API ===
Modifies the specified cloud backup container settings.

==== Argument List ====

<code>
    container: <string>
    name: <string>
    description: <string>
    encryptionKey: <string>
    enableNfs: <boolean>
    flags: <unsignedInt>
</code>

=== cloudContainerRemove API ===
Removes the specified cloud backup container from the system but does not delete any backup data in the cloud.

==== Argument List ====

<code>
    container: <string>
    flags: <unsignedInt>
</code>

=== cloudContainerRepair API ===
Repairs the specified cloud backup container.

==== Argument List ====

<code>
    container: <string>
    flags: <unsignedInt>
</code>

=== cloudProviderCredentialsAdd API ===
Adds cloud provider credentials to enable cloud backup to cloud backup containers.

==== Argument List ====

<code>
    username: <string>
    password: <string>
    providerId: <string>
    machine: <string>
    flags: <unsignedInt>
</code>

=== cloudProviderCredentialsEnum API ===
Returns a list of all the cloud provider credentials in the system. Passwords are masked.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== cloudProviderCredentialsGet API ===
Returns information about the specified cloud provider credential.

==== Argument List ====

<code>
    credentialId: <string>
    flags: <unsignedInt>
</code>

=== cloudProviderCredentialsRemove API ===
Removes the specified cloud provider credentials

==== Argument List ====

<code>
    credentialsId: <string>
    flags: <unsignedInt>
</code>

=== cloudProviderEnum API ===
Returns the list of supported cloud providers.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== cloudProviderGet API ===
Returns detailed information about the specified cloud provider.

==== Argument List ====

<code>
    providerId: <string>
    flags: <unsignedInt>
</code>

=== cloudProviderLocationAdd API ===

==== Argument List ====

<code>
    providerId: <string>
    locationTag: <string>
    flags: <unsignedInt>
</code>

=== cloudProviderLocationEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== cloudProviderLocationGet API ===

==== Argument List ====

<code>
    locationId: <string>
    flags: <unsignedInt>
</code>

=== cloudProviderLocationRemove API ===

==== Argument List ====

<code>
    locationId: <string>
    flags: <unsignedInt>
</code>

=== clusterFailoverGroupActivate API ===
Activate the cluster fail over group.

==== Argument List ====

<code>
    clusterFailoverGroup: <string>
    storageSystemId: <string>
    flags: <unsignedInt>
</code>

=== clusterFailoverGroupCreate API ===
Creates a new management grid.  A given storage system can only be a member of one grid at a time.

==== Argument List ====

<code>
    storageSystemCluster: <string>
    name: <string>
    description: <string>
    storagePool: <string>
    zoneConfig: <string>
    flags: <unsignedInt>
</code>

=== clusterFailoverGroupDelete API ===
Deletes the management grid.  After the grid is deleted each node in the grid operates independently again.

==== Argument List ====

<code>
    clusterFailoverGroup: <string>
    flags: <unsignedInt>
</code>

=== clusterFailoverGroupEnum API ===
Returns a list of all the managed storage system nodes in the grid.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== clusterFailoverGroupGet API ===
Get general information about the storage system management grid.

==== Argument List ====

<code>
    clusterFailoverGroup: <string>
    flags: <unsignedInt>
</code>

=== clusterFailoverGroupModify API ===
Modify the management grid properties.

==== Argument List ====

<code>
    clusterFailoverGroup: <string>
    name: <string>
    description: <string>
    storagePool: <string>
    zoneConfig: <string>
    flags: <unsignedInt>
</code>

=== customApi API ===

==== Argument List ====

<code>
    method: <string>
    params: <keyValuePair[]>
    flags: <unsignedInt>
</code>

=== echo API ===
Test method which pings the server with a simple string

==== Argument List ====

<code>
    inputMessage: <string>
</code>

=== eventEnum API ===
Returns a list of all the internal events in the event queue (used for service monitoring).

==== Argument List ====

<code>
    startingIndex: <unsignedInt>
    maxEvents: <unsignedInt>
    serviceTimeStamp: <dateTime>
</code>

=== eventListenerNotify API ===

==== Argument List ====

<code>
    storageSystemId: <string>
    list: <event[]>
</code>

=== eventListenerRegister API ===

==== Argument List ====

<code>
    eventListenerObj: <eventListener>
</code>

=== eventListenerUnregister API ===

==== Argument List ====

<code>
    listenerId: <string>
</code>

=== fcTargetPortDisable API ===
Disables the specified fiber channel port.

==== Argument List ====

<code>
    port: <string>
    flags: <unsignedInt>
</code>

=== fcTargetPortEnable API ===
Enables the specified fiber channel port.

==== Argument List ====

<code>
    port: <string>
    flags: <unsignedInt>
</code>

=== fcTargetPortEnum API ===
Returns a list of all the fiber channel target ports in the system.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== fcTargetPortGet API ===
Returns information about the specified fiber channel target port.

==== Argument List ====

<code>
    port: <string>
    flags: <unsignedInt>
</code>

=== getHardwareConfig API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== getLocalizedMessage API ===

==== Argument List ====

<code>
    locale: <string>
    i18nStr: <i18nString>
    flags: <unsignedInt>
</code>

=== getSecurityConfig API ===
Gets the complete security profile for the service.

==== Argument List ====

<code>
    storageSystemId: <string>
    flags: <unsignedInt>
</code>

=== getSystemConfig API ===
Gets the storage systems configuration.

==== Argument List ====

<code>
    storageSystemId: <string>
    flags: <unsignedInt>
</code>

=== glusterBrickCreate API ===

==== Argument List ====

<code>
    glusterVolume: <string>
    storagePool: <string>
    flags: <unsignedInt>
</code>

=== glusterBrickDelete API ===

==== Argument List ====

<code>
    glusterBrick: <string>
    deleteData: <boolean>
    flags: <unsignedInt>
</code>

=== glusterBrickEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== glusterBrickGet API ===

==== Argument List ====

<code>
    glusterBrick: <string>
    flags: <unsignedInt>
</code>

=== glusterHaFailoverInterfaceCreate API ===

==== Argument List ====

<code>
    glusterVolumeId: <string>
    primaryStorageSystemId: <string>
    secondaryStorageSystemId: <string>
    failoverPolicy: <unsignedInt>
    tag: <string>
    parentInterfaceName: <string>
    description: <string>
    ipAddress: <string>
    gateway: <string>
    subnetMask: <string>
    macAddress: <string>
    flags: <unsignedInt>
</code>

=== glusterHaFailoverInterfaceDelete API ===

==== Argument List ====

<code>
    glusterVolumeId: <string>
    failoverInterfaceId: <string>
    flags: <unsignedInt>
</code>

=== glusterHaFailoverInterfaceEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== glusterHaFailoverInterfaceGet API ===

==== Argument List ====

<code>
    glusterVolumeId: <string>
    failoverInterfaceId: <string>
    flags: <unsignedInt>
</code>

=== glusterHaFailoverInterfaceMove API ===

==== Argument List ====

<code>
    glusterVolumeId: <string>
    failoverInterfaceId: <string>
    moveToStorageSystemId: <string>
    flags: <unsignedInt>
</code>

=== glusterPeerDetach API ===

==== Argument List ====

<code>
    glusterPeer: <string>
    flags: <unsignedInt>
</code>

=== glusterPeerEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== glusterPeerGet API ===

==== Argument List ====

<code>
    glusterPeer: <string>
    flags: <unsignedInt>
</code>

=== glusterPeerProbe API ===

==== Argument List ====

<code>
    storageSystem: <string>
    hostname: <string>
    flags: <unsignedInt>
</code>

=== glusterServiceRestart API ===

==== Argument List ====

<code>
    storageSystem: <string>
    flags: <unsignedInt>
</code>

=== glusterVolumeAddBricks API ===

==== Argument List ====

<code>
    glusterVolume: <string>
    storagePoolList: <string[]>
    restripeVolume: <boolean>
    flags: <unsignedInt>
</code>

=== glusterVolumeCreate API ===

==== Argument List ====

<code>
    name: <string>
    description: <string>
    storagePoolList: <string[]>
    replicaCount: <unsignedInt>
    stripeVolume: <boolean>
    flags: <unsignedInt>
</code>

=== glusterVolumeDelete API ===

==== Argument List ====

<code>
    glusterVolume: <string>
    flags: <unsignedInt>
</code>

=== glusterVolumeEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== glusterVolumeGet API ===

==== Argument List ====

<code>
    glusterVolume: <string>
    flags: <unsignedInt>
</code>

=== glusterVolumeModify API ===

==== Argument List ====

<code>
    glusterVolume: <string>
    name: <string>
    description: <string>
    flags: <unsignedInt>
</code>

=== glusterVolumeRebalance API ===

==== Argument List ====

<code>
    glusterVolume: <string>
    option: <unsignedInt>
    flags: <unsignedInt>
</code>

=== glusterVolumeReplaceBrick API ===

==== Argument List ====

<code>
    glusterVolume: <string>
    oldBrick: <string>
    newBrick: <string>
    flags: <unsignedInt>
</code>

=== glusterVolumeStart API ===

==== Argument List ====

<code>
    glusterVolume: <string>
    flags: <unsignedInt>
</code>

=== glusterVolumeStop API ===

==== Argument List ====

<code>
    glusterVolume: <string>
    flags: <unsignedInt>
</code>

=== hostAdd API ===
Adds the specified host.

==== Argument List ====

<code>
    hostname: <string>
    ipAddress: <string>
    username: <string>
    password: <string>
    hostType: <unsignedInt>
    description: <string>
    iqn: <string>
    flags: <unsignedInt>
</code>

=== hostEnum API ===
Returns a list of all the hosts.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== hostGet API ===
Gets information about a specific host.

==== Argument List ====

<code>
    host: <string>
    flags: <unsignedInt>
</code>

=== hostGroupCreate API ===
Creates a new host group with the specified name.

==== Argument List ====

<code>
    name: <string>
    description: <string>
    hostList: <string[]>
    flags: <unsignedInt>
</code>

=== hostGroupDelete API ===
Removes the specified host group.

==== Argument List ====

<code>
    host: <string>
    deleteAssociatedHosts: <boolean>
    flags: <unsignedInt>
</code>

=== hostGroupEnum API ===
Returns a list of all the host groups.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== hostGroupGet API ===
Gets information about a specific host group.

==== Argument List ====

<code>
    hostGroup: <string>
    flags: <unsignedInt>
</code>

=== hostGroupHostAddRemove API ===
Adds/Removes a host to the specified host group.

==== Argument List ====

<code>
    hostGroup: <string>
    modType: <unsignedInt>
    hostList: <string[]>
    flags: <unsignedInt>
</code>

=== hostGroupModify API ===
Modifies the properties of a host group such as its name and/or description.

==== Argument List ====

<code>
    hostGroup: <string>
    newName: <string>
    newDescription: <string>
    flags: <unsignedInt>
</code>

=== hostInitiatorAdd API ===
Adds an additional iSCSI host initiator IQN to the specified host.

==== Argument List ====

<code>
    host: <string>
    iqn: <string>
    flags: <unsignedInt>
</code>

=== hostInitiatorEnum API ===
Returns a list of all the initiators (IQN) of the specified host.

==== Argument List ====

<code>
    host: <string>
    flags: <unsignedInt>
</code>

=== hostInitiatorGet API ===
Gets information about a specific host identified by its initiator IQN.

==== Argument List ====

<code>
    initiator: <string>
    flags: <unsignedInt>
</code>

=== hostInitiatorRemove API ===
Removes a iSCSI host initiator (IQN) from the specified host.

==== Argument List ====

<code>
    host: <string>
    iqn: <string>
    flags: <unsignedInt>
</code>

=== hostModify API ===
Modifies a host.

==== Argument List ====

<code>
    host: <string>
    newIpAddress: <string>
    newUsername: <string>
    newPassword: <string>
    newHostType: <unsignedInt>
    newDescription: <string>
    flags: <unsignedInt>
</code>

=== hostRemove API ===
Removes the specified host, *WARNING* host's active iSCSI sessions will be dropped.

==== Argument List ====

<code>
    host: <string>
    flags: <unsignedInt>
</code>

=== hwAlarmEnum API ===
Returns a list of all the current hardware alarms/alert messages generated from the controller.

==== Argument List ====

<code>
    hwController: <string>
    flags: <unsignedInt>
</code>

=== hwAlarmGet API ===
Returns information about a specific hardware alarm.

==== Argument List ====

<code>
    hwAlarm: <string>
    flags: <unsignedInt>
</code>

=== hwBatteryBackupUnitEnum API ===
Enumerates the battery backup information for the specified controller.

==== Argument List ====

<code>
    hwController: <string>
    flags: <unsignedInt>
</code>

=== hwBatteryBackupUnitGet API ===
Gets the battery backup unit information for the specified battery backup unit.

==== Argument List ====

<code>
    hwBatteryBackupUnit: <string>
    flags: <unsignedInt>
</code>

=== hwControllerChangeSecurityKey API ===

==== Argument List ====

<code>
    controllerId: <string>
    oldSecurityKey: <string>
    newSecurityKey: <string>
    flags: <unsignedInt>
</code>

=== hwControllerClearAlarms API ===
Clears all the hardware alarms that have been recorded for the specified hardware RAID controller.

==== Argument List ====

<code>
    controllerId: <string>
    flags: <unsignedInt>
</code>

=== hwControllerCreateSecurityKey API ===

==== Argument List ====

<code>
    controllerId: <string>
    securityKey: <string>
    flags: <unsignedInt>
</code>

=== hwControllerEnum API ===
Returns a list of all the hardware controllers.

==== Argument List ====

<code>
    hwControllerGroup: <string>
    flags: <unsignedInt>
</code>

=== hwControllerGet API ===
Returns information about a specific hardware RAID controller.

==== Argument List ====

<code>
    hwController: <string>
    flags: <unsignedInt>
</code>

=== hwControllerGroupEnum API ===
Returns a list of all the hardware controller groups.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== hwControllerGroupGet API ===
Returns information about all the support hardware RAID controller group types.

==== Argument List ====

<code>
    hwControllerGroup: <string>
    flags: <unsignedInt>
</code>

=== hwControllerImportForeignUnits API ===

==== Argument List ====

<code>
    controllerId: <string>
    flags: <unsignedInt>
</code>

=== hwControllerModify API ===

==== Argument List ====

<code>
    controllerId: <string>
    altName: <string>
    description: <string>
    flags: <unsignedInt>
</code>

=== hwControllerRescan API ===
Rescans the hardware controller to look for new disks and RAID units.

==== Argument List ====

<code>
    controllerId: <string>
    flags: <unsignedInt>
</code>

=== hwControllerRescanAll API ===
Rescans all of the hardware controllers to look for new disks and RAID units.

==== Argument List ====

<code>
    storageSystemId: <string>
    flags: <unsignedInt>
</code>

=== hwControllerSilenceAlarms API ===
Silences the alarms for specified hardware controller.

==== Argument List ====

<code>
    controllerId: <string>
    flags: <unsignedInt>
</code>

=== hwDiskEnum API ===
Returns a list of all the disks managed by the specified hardware controller.

==== Argument List ====

<code>
    hwController: <string>
    flags: <unsignedInt>
</code>

=== hwDiskGet API ===
Returns information about a specific disk managed by a hardware RAID controller.

==== Argument List ====

<code>
    hwDisk: <string>
    flags: <unsignedInt>
</code>

=== hwDiskIdentify API ===
Flashes the LED indicator light on the specified disk so that it can be identified in the enclosure chassis.

==== Argument List ====

<code>
    diskId: <string>
    durationInSeconds: <unsignedInt>
    flags: <unsignedInt>
</code>

=== hwDiskMarkGood API ===

==== Argument List ====

<code>
    diskId: <string>
    flags: <unsignedInt>
</code>

=== hwDiskMarkHotSpare API ===
Marks the specified disk as a universal hot spare within the group of RAID units managed by the controller in which the disk is attached.

==== Argument List ====

<code>
    diskId: <string>
    clearMark: <boolean>
    flags: <unsignedInt>
</code>

=== hwDiskModify API ===

==== Argument List ====

<code>
    diskId: <string>
    altName: <string>
    description: <string>
    flags: <unsignedInt>
</code>

=== hwDiskRemove API ===
Marks the disk as removable (safe way to swap the drives).

==== Argument List ====

<code>
    diskId: <string>
    flags: <unsignedInt>
</code>

=== hwEnclosureEnum API ===
Returns a list of all the enclosures managed by the specified hardware RAID controller.

==== Argument List ====

<code>
    hwController: <string>
    flags: <unsignedInt>
</code>

=== hwEnclosureGet API ===
Returns information about a specific enclosure managed by the specified hardware RAID controller.

==== Argument List ====

<code>
    hwEnclosure: <string>
    flags: <unsignedInt>
</code>

=== hwEnclosureLayoutEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== hwEnclosureLayoutGet API ===

==== Argument List ====

<code>
    hwEnclosureLayout: <string>
    flags: <unsignedInt>
</code>

=== hwEnclosureModify API ===

==== Argument List ====

<code>
    diskId: <string>
    altName: <string>
    description: <string>
    enclosureLayout: <string>
    flags: <unsignedInt>
</code>

=== hwLogicalDriveEnum API ===

==== Argument List ====

<code>
    hwUnit: <string>
    flags: <unsignedInt>
</code>

=== hwLogicalDriveGet API ===

==== Argument List ====

<code>
    hwLogicalDrive: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchAdapterEnum API ===
Returns a list of all the storage switch management adapters.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== hwSwitchAdapterGet API ===
Returns information about the specified HW switch management module.

==== Argument List ====

<code>
    switchAdapterId: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchCredentialsAdd API ===
Adds storage switch login credentials for a specific switch management adapter.

==== Argument List ====

<code>
    username: <string>
    password: <string>
    domainPassword: <string>
    ipAddress: <string>
    managementProtocol: <unsignedInt>
    switchType: <unsignedInt>
    switchAdapterId: <string>
    primaryStorageSystem: <string>
    secondaryStorageSystem: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchCredentialsEnum API ===
Returns a list of all the storage switch login credentials.

==== Argument List ====

<code>
    switchAdapterId: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchCredentialsGet API ===
Returns information about specific storage switch login credentials.

==== Argument List ====

<code>
    switchCredentials: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchCredentialsModify API ===
Modifies the switch login credentials.

==== Argument List ====

<code>
    credentialsId: <string>
    password: <string>
    domainPassword: <string>
    primaryStorageSystem: <string>
    secondaryStorageSystem: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchCredentialsRemove API ===
Removes storage switch login credentials.

==== Argument List ====

<code>
    credsId: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchEnum API ===
Returns a list of all the discovered storage switches.

==== Argument List ====

<code>
    switchAdapterId: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchFailoverGroupActivate API ===
Activates the pools in a switch failover group on the specified storage system.

==== Argument List ====

<code>
    hwSwitchFailoverGroup: <string>
    storageSystemId: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchFailoverGroupCreate API ===
Creates a new switch failover group.

==== Argument List ====

<code>
    name: <string>
    description: <string>
    virtualHostIpAddress: <string>
    virtualHostSubnet: <string>
    virtualHostGateway: <string>
    storagePoolList: <string[]>
    primaryStorageSystemId: <string>
    primaryZonesetId: <string>
    secondaryStorageSystemId: <string>
    secondaryZonesetId: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchFailoverGroupDelete API ===
Deletes a failover group.

==== Argument List ====

<code>
    hwSwitchFailoverGroup: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchFailoverGroupEnum API ===
Returns a list of all the switch failover groups.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== hwSwitchFailoverGroupGet API ===
Returns information about a specific switch failover group.

==== Argument List ====

<code>
    hwSwitchFailoverGroupId: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchFailoverGroupModify API ===
Modifies the properties of a failover group.

==== Argument List ====

<code>
    hwSwitchFailoverGroup: <string>
    name: <string>
    description: <string>
    virtualHostIpAddress: <string>
    virtualHostSubnet: <string>
    virtualHostGateway: <string>
    storagePoolList: <string[]>
    primaryStorageSystemId: <string>
    primaryZonesetId: <string>
    secondaryStorageSystemId: <string>
    secondaryZonesetId: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchFailoverGroupPoolAssocEnum API ===

==== Argument List ====

<code>
    hwSwitchFailoverGroup: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchFailoverGroupPoolAssocGet API ===

==== Argument List ====

<code>
    hwSwitchFailoverGroupId: <string>
    storagePoolId: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchFailoverGroupSetMode API ===

==== Argument List ====

<code>
    hwSwitchFailoverGroup: <string>
    failoverMode: <unsignedInt>
    flags: <unsignedInt>
</code>

=== hwSwitchFailoverGroupSystemAssocAdd API ===
Adds another storage system to which the failover group can failover to.

==== Argument List ====

<code>
    hwSwitchFailoverGroup: <string>
    storageSystemId: <string>
    zonesetId: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchFailoverGroupSystemAssocEnum API ===

==== Argument List ====

<code>
    hwSwitchFailoverGroup: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchFailoverGroupSystemAssocGet API ===

==== Argument List ====

<code>
    hwSwitchFailoverGroupId: <string>
    storageSystemId: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchFailoverGroupSystemAssocRemove API ===
Removes a storage system from the failover group.

==== Argument List ====

<code>
    hwSwitchFailoverGroup: <string>
    storageSystemId: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchGet API ===
Returns detailed information about a storage switch.

==== Argument List ====

<code>
    switchId: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchRescan API ===
Rescans the hardware switch.

==== Argument List ====

<code>
    switchId: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchZonesetActivate API ===
Activates a specific storage switch zonset.

==== Argument List ====

<code>
    switchCredentialsId: <string>
    zonesetId: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchZonesetEnum API ===
Returns a list of all the discovered zonesets.

==== Argument List ====

<code>
    switchCredentialsId: <string>
    flags: <unsignedInt>
</code>

=== hwSwitchZonesetGet API ===
Returns information about a specific switch zoneset.

==== Argument List ====

<code>
    switchZoneset: <string>
    flags: <unsignedInt>
</code>

=== hwUnitCreate API ===
Creates a new hardware RAID unit using the specified controller.

==== Argument List ====

<code>
    controllerId: <string>
    raidType: <unsignedInt>
    legLength: <unsignedInt>
    blockSizeKb: <unsignedInt>
    diskList: <string[]>
    flags: <unsignedInt>
</code>

=== hwUnitDelete API ===
Deletes the specified RAID unit.  Note that you must first delete the Storage Pool before you delete the RAID unit.

==== Argument List ====

<code>
    unitId: <string>
    flags: <unsignedInt>
</code>

=== hwUnitDiskAssocEnum API ===

==== Argument List ====

<code>
    hwUnit: <string>
    flags: <unsignedInt>
</code>

=== hwUnitDiskAssocGet API ===

==== Argument List ====

<code>
    hwUnit: <string>
    hwDisk: <string>
    flags: <unsignedInt>
</code>

=== hwUnitEnableEncryption API ===

==== Argument List ====

<code>
    unitId: <string>
    options: <unsignedInt>
    flags: <unsignedInt>
</code>

=== hwUnitEnum API ===
Returns a list of all the disks managed by the specified hardware controller.

==== Argument List ====

<code>
    hwController: <string>
    flags: <unsignedInt>
</code>

=== hwUnitGet API ===
Returns information about a specific disk managed by a hardware RAID controller.

==== Argument List ====

<code>
    hwUnit: <string>
    flags: <unsignedInt>
</code>

=== hwUnitGrow API ===
Grows the hardware unit by adding specified disks.

==== Argument List ====

<code>
    unitId: <string>
    diskList: <string[]>
    stripeSizeKb: <unsignedInt>
    initPriority: <unsignedInt>
    flags: <unsignedInt>
</code>

=== hwUnitIdentify API ===
Flashes the LED indicator light on all the disks in the RAID unit so that it can be identified in the enclosure.

==== Argument List ====

<code>
    unitId: <string>
    durationInSeconds: <unsignedInt>
    flags: <unsignedInt>
</code>

=== hwUnitModify API ===

==== Argument List ====

<code>
    unitId: <string>
    altName: <string>
    description: <string>
    flags: <unsignedInt>
</code>

=== hwUnitSsdCacheCreate API ===

==== Argument List ====

<code>
    controllerId: <string>
    raidType: <unsignedInt>
    ssdDiskList: <string[]>
    flags: <unsignedInt>
</code>

=== hwUnitSsdCacheDisable API ===

==== Argument List ====

<code>
    unitId: <string>
    flags: <unsignedInt>
</code>

=== hwUnitSsdCacheEnable API ===

==== Argument List ====

<code>
    unitId: <string>
    unitSsdCacheId: <string>
    flags: <unsignedInt>
</code>

=== ibTargetPortEnum API ===
Returns a list of all the infiniband ports in the system.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== ibTargetPortGet API ===
Returns information about the specified infiniband port.

==== Argument List ====

<code>
    port: <string>
    flags: <unsignedInt>
</code>

=== libratoMetricsConfigGet API ===
Get the current username, token, and interval settings for Librato Metrics.

==== Argument List ====

<code>
    storageSystem: <string>
    flags: <unsignedInt>
</code>

=== libratoMetricsConfigSet API ===
Set the username, token, and interval for Librato Metrics posting.

==== Argument List ====

<code>
    storageSystem: <string>
    username: <string>
    token: <string>
    postIntervalSec: <unsignedInt>
    autoDashboardCreate: <boolean>
    enableAlertAnnotations: <boolean>
    enableConfigAnnotations: <boolean>
    flags: <unsignedInt>
</code>

=== licenseActivate API ===
Activates the system using a activation key received from customer support.

==== Argument List ====

<code>
    activationKey: <string>
    flags: <unsignedInt>
</code>

=== licenseActivateOnline API ===
Requests automatic activation via the online activation service.

==== Argument List ====

<code>
    licenseKey: <string>
    flags: <unsignedInt>
</code>

=== licenseAdd API ===
Adds a license key using a license key block.

==== Argument List ====

<code>
    storageSystem: <string>
    keyBlock: <string>
    flags: <unsignedInt>
</code>

=== licenseEnum API ===
Returns a list of all the registered license keys.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== licenseGet API ===
Shows the current license key info, and any activation request code.

==== Argument List ====

<code>
    license: <string>
    flags: <unsignedInt>
</code>

=== licenseRemove API ===
Removes the specified license key.

==== Argument List ====

<code>
    license: <string>
    flags: <unsignedInt>
</code>

=== login API ===

==== Argument List ====

<code>
    reserved: <string>
</code>

=== networkShareCifsOptionEnum API ===

==== Argument List ====

<code>
    networkShare: <string>
    flags: <unsignedInt>
</code>

=== networkShareCifsOptionGet API ===

==== Argument List ====

<code>
    networkShareId: <string>
    key: <string>
    flags: <unsignedInt>
</code>

=== networkShareClientAdd API ===
Adds a client for the specified network share.

==== Argument List ====

<code>
    networkShareId: <string>
    clientFilter: <string>
    async: <boolean>
    secure: <boolean>
    subtreeCheck: <boolean>
    readOnly: <boolean>
    customOptions: <string>
    flags: <unsignedInt>
</code>

=== networkShareClientEnum API ===
Returns a list of clients for the specified network share.

==== Argument List ====

<code>
    networkShare: <string>
    flags: <unsignedInt>
</code>

=== networkShareClientGet API ===
Returns information about the specific network share client.

==== Argument List ====

<code>
    networkShareId: <string>
    networkShareClientId: <string>
    flags: <unsignedInt>
</code>

=== networkShareClientModify API ===
Modifies a client for the specified network share.

==== Argument List ====

<code>
    networkShareId: <string>
    networkShareClientId: <string>
    readOnly: <boolean>
    secure: <boolean>
    async: <boolean>
    subtreeCheck: <boolean>
    customOptions: <string>
    flags: <unsignedInt>
</code>

=== networkShareClientRemove API ===
Removes a client for the specified network share.

==== Argument List ====

<code>
    networkShareId: <string>
    networkShareClientId: <string>
    flags: <unsignedInt>
</code>

=== networkShareClone API ===
Clones the specified network share.

==== Argument List ====

<code>
    networkShare: <string>
    cloneName: <string>
    description: <string>
    provisionableId: <string>
    readOnly: <boolean>
    isActive: <boolean>
    flags: <unsignedInt>
</code>

=== networkShareCreate API ===
Creates a new NFSv3 network share.

==== Argument List ====

<code>
    name: <string>
    description: <string>
    provisionableId: <string>
    isPublic: <boolean>
    isActive: <boolean>
    flags: <unsignedInt>
</code>

=== networkShareCreateEx API ===

==== Argument List ====

<code>
    name: <string>
    description: <string>
    provisionableId: <string>
    isPublic: <boolean>
    isActive: <boolean>
    enableCifs: <boolean>
    userAccessList: <string[]>
    cifsOptions: <string[]>
    disableSnapBrowsing: <boolean>
    spaceQuota: <unsignedLong>
    flags: <unsignedInt>
</code>

=== networkShareDelete API ===
Deletes the specified network share.

==== Argument List ====

<code>
    networkShareId: <string>
    flags: <unsignedInt>
</code>

=== networkShareDeleteEx API ===

==== Argument List ====

<code>
    networkShareList: <string[]>
    flags: <unsignedInt>
</code>

=== networkShareDisable API ===
Disables the specified network share.

==== Argument List ====

<code>
    networkShare: <string>
    flags: <unsignedInt>
</code>

=== networkShareEnable API ===
Enables the specified network share.

==== Argument List ====

<code>
    networkShare: <string>
    flags: <unsignedInt>
</code>

=== networkShareEnum API ===
Returns a list of all the network shares in the system.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== networkShareEnumQuotas API ===

==== Argument List ====

<code>
    networkShare: <string>
    flags: <unsignedInt>
</code>

=== networkShareGet API ===
Returns information about the specified network share.

==== Argument List ====

<code>
    networkShare: <string>
    flags: <unsignedInt>
</code>

=== networkShareJoinDomain API ===

==== Argument List ====

<code>
    storageSystemId: <string>
    domain: <string>
    realm: <string>
    kdc: <string>
    domainAdmin: <string>
    password: <string>
    flags: <unsignedInt>
</code>

=== networkShareLeaveDomain API ===

==== Argument List ====

<code>
    storageSystemId: <string>
    domainAdmin: <string>
    password: <string>
    flags: <unsignedInt>
</code>

=== networkShareModify API ===
Modifies a client for the specified network share.

==== Argument List ====

<code>
    networkShare: <string>
    name: <string>
    description: <string>
    isActive: <boolean>
    enableCifs: <boolean>
    userAccessList: <string[]>
    cifsOptions: <string[]>
    disableSnapBrowsing: <boolean>
    spaceQuota: <unsignedLong>
    syncPolicy: <unsignedInt>
    compressionType: <string>
    copies: <unsignedInt>
    flags: <unsignedInt>
</code>

=== networkShareNfsConfig API ===

==== Argument List ====

<code>
    storageSystem: <string>
    nfsMode: <unsignedInt>
    enableKerberos: <boolean>
    defaultOptions: <string>
    reserved: <string>
    flags: <unsignedInt>
</code>

=== networkShareRestore API ===
Restores the network share from a previous snapshot of the share.

==== Argument List ====

<code>
    networkShare: <string>
    snapshotShare: <string>
    flags: <unsignedInt>
</code>

=== networkShareRollback API ===

==== Argument List ====

<code>
    networkShare: <string>
    snapshotShare: <string>
    flags: <unsignedInt>
</code>

=== networkShareServicesRestart API ===
Restarts the network share service.

==== Argument List ====

<code>
    storageSystem: <string>
    restartNfs: <boolean>
    restartSamba: <boolean>
    flags: <unsignedInt>
</code>

=== networkShareSetQuotas API ===

==== Argument List ====

<code>
    networkShare: <string>
    list: <networkShareQuota[]>
    flags: <unsignedInt>
</code>

=== networkShareSnapshot API ===
Snapshots the specified network share.

==== Argument List ====

<code>
    networkShare: <string>
    snapshotName: <string>
    description: <string>
    provisionableId: <string>
    readOnly: <boolean>
    isActive: <boolean>
    flags: <unsignedInt>
</code>

=== networkShareUserAccessEnum API ===

==== Argument List ====

<code>
    networkShare: <string>
    flags: <unsignedInt>
</code>

=== networkShareUserAccessGet API ===

==== Argument List ====

<code>
    networkShareUserAccessId: <string>
    flags: <unsignedInt>
</code>

=== objectEnum API ===

==== Argument List ====

<code>
    propKey: <string>
    propValue: <string>
    propType: <unsignedInt>
    flags: <unsignedInt>
</code>

=== objectGet API ===
Gets the object based on the id provided.

==== Argument List ====

<code>
    id: <string>
    flags: <unsignedInt>
</code>

=== objectLock API ===
Locks the specified object.

==== Argument List ====

<code>
    id: <string>
</code>

=== objectPropertyGet API ===
Gets the specified property on an object.

==== Argument List ====

<code>
    objectId: <string>
    propKey: <string>
    flags: <unsignedInt>
</code>

=== objectPropertySet API ===
Sets the specified property on an object.

==== Argument List ====

<code>
    objectId: <string>
    propKey: <string>
    propValue: <string>
    propType: <unsignedInt>
    flags: <unsignedInt>
</code>

=== objectUnlock API ===
Unlocks an object.

==== Argument List ====

<code>
    id: <string>
</code>

=== permissionDefinitionEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== physicalDiskDataMigration API ===

==== Argument List ====

<code>
    physicalDriveId: <string>
    storageVolumeName: <string>
    provisionableId: <string>
    blockSizeKb: <unsignedInt>
    flags: <unsignedInt>
</code>

=== physicalDiskEnum API ===
Enumerates all physical disks.

==== Argument List ====

<code>
    physicalDiskList: <string[]>
    flags: <unsignedInt>
</code>

=== physicalDiskGet API ===
Gets information about a specific physical disk.

==== Argument List ====

<code>
    physicalDrive: <string>
    flags: <unsignedInt>
</code>

=== physicalDiskGlobalSpareAddRemove API ===

==== Argument List ====

<code>
    physicalDriveList: <string[]>
    modType: <unsignedInt>
    flags: <unsignedInt>
</code>

=== physicalDiskGlobalSpareEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== physicalDiskHotspareMarkerCleanup API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== physicalDiskHotspareMarkerEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== physicalDiskHotspareMarkerGet API ===

==== Argument List ====

<code>
    markerId: <string>
    flags: <unsignedInt>
</code>

=== physicalDiskIdentify API ===
Pulses the disk activity light so that the specified disk can be identified in the chassis.

==== Argument List ====

<code>
    physicalDrive: <string>
    pattern: <string>
    duration: <unsignedInt>
    flags: <unsignedInt>
</code>

=== physicalDiskPathAssocEnum API ===

==== Argument List ====

<code>
    multipathDiskId: <string>
    flags: <unsignedInt>
</code>

=== physicalDiskPathAssocGet API ===

==== Argument List ====

<code>
    multipathDiskId: <string>
    physicalDiskId: <string>
    flags: <unsignedInt>
</code>

=== physicalDiskScan API ===
Scans for any new physical disks that may have been hot-plugged into the storage system.

==== Argument List ====

<code>
    storageSystemId: <string>
    flags: <unsignedInt>
</code>

=== registerSecurityToken API ===

==== Argument List ====

<code>
    token: <string>
    signedToken: <string>
    flags: <unsignedInt>
</code>

=== remoteNfsExportsEnum API ===

==== Argument List ====

<code>
    networkShare: <string>
    nfsHostname: <string>
    backupPolicy: <string>
    flags: <unsignedInt>
</code>

=== remoteStoragePoolEnum API ===
Returns a list of all the remote storage pools.

==== Argument List ====

<code>
    remoteStorageSystemId: <string>
    flags: <unsignedInt>
</code>

=== replicaAssocDelete API ===

==== Argument List ====

<code>
    assocId: <string>
    deleteSourceReplicatable: <boolean>
    deleteTargetReplicatable: <boolean>
    deleteReplicaAssocHead: <boolean>
    flags: <unsignedInt>
</code>

=== replicaAssocEnum API ===

==== Argument List ====

<code>
    replicatableId: <string>
    sourcesOnly: <boolean>
    targetsOnly: <boolean>
    flags: <unsignedInt>
</code>

=== replicaAssocGet API ===

==== Argument List ====

<code>
    assocId: <string>
    flags: <unsignedInt>
</code>

=== replicaAssocUpdate API ===

==== Argument List ====

<code>
    assocObj: <replicaAssoc>
    flags: <unsignedInt>
</code>

=== replicaCreate API ===

==== Argument List ====

<code>
    replicatableId: <string>
    storageSystemLinkId: <string>
    replicaName: <string>
    replicaDescription: <string>
    targetStoragePoolId: <string>
    replicationPriority: <unsignedInt>
    smartSync: <boolean>
    forcePrimary: <boolean>
    reserved: <string>
    flags: <unsignedInt>
</code>

=== replicaCreateNetworkShareTarget API ===

==== Argument List ====

<code>
    sourceShare: <networkShare>
    sourceShareParent: <networkShare>
    replicaName: <string>
    replicaDescription: <string>
    targetStoragePoolId: <string>
    replicationPriority: <unsignedInt>
    smartSync: <boolean>
    forcePrimary: <boolean>
    reserved: <string>
    flags: <unsignedInt>
</code>

=== replicaCreateVolumeTarget API ===

==== Argument List ====

<code>
    sourceVolume: <storageVolume>
    sourceVolumeParent: <storageVolume>
    replicaName: <string>
    replicaDescription: <string>
    targetStoragePoolId: <string>
    replicationPriority: <unsignedInt>
    smartSync: <boolean>
    forcePrimary: <boolean>
    reserved: <string>
    flags: <unsignedInt>
</code>

=== replicaRollback API ===

==== Argument List ====

<code>
    assocId: <string>
    flags: <unsignedInt>
</code>

=== replicaStatusUpdate API ===

==== Argument List ====

<code>
    replicationStatusXml: <string>
    flags: <unsignedInt>
</code>

=== replicaStop API ===

==== Argument List ====

<code>
    assocId: <string>
    flags: <unsignedInt>
</code>

=== replicaSync API ===

==== Argument List ====

<code>
    assocId: <string>
    flags: <unsignedInt>
</code>

=== replicationScheduleAddRemove API ===

==== Argument List ====

<code>
    schedule: <string>
    modType: <unsignedInt>
    storageVolumeList: <string[]>
    networkShareList: <string[]>
    flags: <unsignedInt>
</code>

=== replicationScheduleAssocEnum API ===

==== Argument List ====

<code>
    schedule: <string>
    flags: <unsignedInt>
</code>

=== replicationScheduleAssocGet API ===

==== Argument List ====

<code>
    scheduleId: <string>
    replicatableId: <string>
</code>

=== replicationScheduleCreate API ===

==== Argument List ====

<code>
    name: <string>
    description: <string>
    storageCloudId: <string>
    storageSystemLinkId: <string>
    targetStorageCloudId: <string>
    targetProvisionableId: <string>
    priority: <unsignedInt>
    setEnabled: <unsignedInt>
    startDate: <dateTime>
    maxReplicas: <unsignedInt>
    daysOfWeek: <unsignedInt>
    hoursOfDay: <unsignedInt>
    storageVolumeList: <string[]>
    networkShareList: <string[]>
    scheduleType: <unsignedInt>
    delayInterval: <unsignedInt>
    offsetMinutes: <unsignedInt>
    flags: <unsignedInt>
</code>

=== replicationScheduleDelete API ===

==== Argument List ====

<code>
    schedule: <string>
    flags: <unsignedInt>
</code>

=== replicationScheduleDisable API ===

==== Argument List ====

<code>
    schedule: <string>
    flags: <unsignedInt>
</code>

=== replicationScheduleEnable API ===

==== Argument List ====

<code>
    schedule: <string>
    flags: <unsignedInt>
</code>

=== replicationScheduleEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== replicationScheduleGet API ===

==== Argument List ====

<code>
    schedule: <string>
    flags: <unsignedInt>
</code>

=== replicationScheduleModify API ===

==== Argument List ====

<code>
    schedule: <string>
    name: <string>
    description: <string>
    storageCloudId: <string>
    setEnabled: <unsignedInt>
    startDate: <dateTime>
    maxReplicas: <unsignedInt>
    daysOfWeek: <unsignedInt>
    hoursOfDay: <unsignedInt>
    scheduleType: <unsignedInt>
    delayInterval: <unsignedInt>
    offsetMinutes: <unsignedInt>
    flags: <unsignedInt>
</code>

=== replicationScheduleTrigger API ===

==== Argument List ====

<code>
    schedule: <string>
    flags: <unsignedInt>
</code>

=== roleCreate API ===
Adds a new role to the role based access control (RBAC) system.

==== Argument List ====

<code>
    name: <string>
    description: <string>
    permissionList: <permissionAssignment[]>
    inheritsFrom: <string>
    flags: <unsignedInt>
</code>

=== roleDelete API ===
Removes the specified role identified by name or ID.

==== Argument List ====

<code>
    role: <string>
    flags: <unsignedInt>
</code>

=== roleEnum API ===
Returns a list of all the defined roles the RBAC system.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== roleGet API ===
Gets information about the specified role.

==== Argument List ====

<code>
    role: <string>
    flags: <unsignedInt>
</code>

=== roleModify API ===
Modifies the name and/or description of a role.

==== Argument List ====

<code>
    role: <string>
    newName: <string>
    newDescription: <string>
    flags: <unsignedInt>
</code>

=== rolePermissionAssignmentEnum API ===
Lists all of the role permission assignments.

==== Argument List ====

<code>
    roleId: <string>
    flags: <unsignedInt>
</code>

=== rolePermissionAssignmentGet API ===
Gets the specified role permission assignment.

==== Argument List ====

<code>
    role: <string>
    objectType: <string>
    operation: <string>
    flags: <unsignedInt>
</code>

=== rolePermissionsAddRemove API ===
Adds/Removes one or more permissions and/or permission groups from the specified role.

==== Argument List ====

<code>
    role: <string>
    modType: <unsignedInt>
    permissionList: <permissionAssignment[]>
    flags: <unsignedInt>
</code>

=== roleSubjectAssocEnum API ===

==== Argument List ====

<code>
    role: <string>
    flags: <unsignedInt>
</code>

=== roleSubjectAssocGet API ===

==== Argument List ====

<code>
    role: <string>
    subject: <string>
    flags: <unsignedInt>
</code>

=== sessionClose API ===
Forcibly closes the specified iSCSI session; generally not recommended, use acl-remove instead.

==== Argument List ====

<code>
    sessionId: <string>
    flags: <unsignedInt>
</code>

=== sessionEnum API ===
Returns a list of all the active iSCSI sessions.

==== Argument List ====

<code>
    host: <string>
    storageVolume: <string>
    flags: <unsignedInt>
</code>

=== sessionGet API ===
Returns detailed information on a specific iSCSI session.

==== Argument List ====

<code>
    sessionId: <string>
    flags: <unsignedInt>
</code>

=== siteAssocEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== siteAssocGet API ===

==== Argument List ====

<code>
    siteId: <string>
    storageSystemId: <string>
    flags: <unsignedInt>
</code>

=== siteCreate API ===

==== Argument List ====

<code>
    name: <string>
    description: <string>
    location: <string>
    storageSystemList: <string[]>
    flags: <unsignedInt>
</code>

=== siteDelete API ===

==== Argument List ====

<code>
    site: <string>
    flags: <unsignedInt>
</code>

=== siteEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== siteGet API ===

==== Argument List ====

<code>
    site: <string>
    flags: <unsignedInt>
</code>

=== siteModify API ===

==== Argument List ====

<code>
    siteId: <string>
    name: <string>
    description: <string>
    location: <string>
    flags: <unsignedInt>
</code>

=== siteStorageSystemAddRemove API ===

==== Argument List ====

<code>
    site: <string>
    modType: <unsignedInt>
    storageSystemList: <string[]>
    flags: <unsignedInt>
</code>

=== snapshotScheduleAssocEnum API ===

==== Argument List ====

<code>
    schedule: <string>
    flags: <unsignedInt>
</code>

=== snapshotScheduleAssocGet API ===

==== Argument List ====

<code>
    scheduleId: <string>
    storageVolumeId: <string>
</code>

=== snapshotScheduleCreate API ===
Creates a new snapshot schedule comprised of the specified storage volumes.

==== Argument List ====

<code>
    name: <string>
    description: <string>
    storageCloudId: <string>
    setEnabled: <unsignedInt>
    startDate: <dateTime>
    maxSnapshots: <unsignedInt>
    daysOfWeek: <unsignedInt>
    hoursOfDay: <unsignedInt>
    storageVolumeList: <string[]>
    networkShareList: <string[]>
    scheduleType: <unsignedInt>
    delayInterval: <unsignedInt>
    flags: <unsignedInt>
</code>

=== snapshotScheduleDelete API ===
Deletes a snapshot schedule, snapshots associated with the schedule are not removed.

==== Argument List ====

<code>
    schedule: <string>
    flags: <unsignedInt>
</code>

=== snapshotScheduleDisable API ===
Disables the specified snapshot schedule.

==== Argument List ====

<code>
    schedule: <string>
    flags: <unsignedInt>
</code>

=== snapshotScheduleEnable API ===
Enables the specified snapshot schedule.

==== Argument List ====

<code>
    schedule: <string>
    flags: <unsignedInt>
</code>

=== snapshotScheduleEnum API ===
Returns a list of all the snapshot schedules.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== snapshotScheduleGet API ===
Returns information about a specific snapshot schedule.

==== Argument List ====

<code>
    schedule: <string>
    flags: <unsignedInt>
</code>

=== snapshotScheduleModify API ===
Modifies the name, description or other properties of a snapshot schedule.

==== Argument List ====

<code>
    schedule: <string>
    name: <string>
    description: <string>
    storageCloudId: <string>
    setEnabled: <unsignedInt>
    startDate: <dateTime>
    maxSnapshots: <unsignedInt>
    daysOfWeek: <unsignedInt>
    hoursOfDay: <unsignedInt>
    scheduleType: <unsignedInt>
    delayInterval: <unsignedInt>
    flags: <unsignedInt>
</code>

=== snapshotScheduleTrigger API ===

==== Argument List ====

<code>
    schedule: <string>
    flags: <unsignedInt>
</code>

=== snapshotScheduleVolumeAddRemove API ===
Adds/Removes one or more volumes to the specified schedule.

==== Argument List ====

<code>
    schedule: <string>
    modType: <unsignedInt>
    storageVolumeList: <string[]>
    networkShareList: <string[]>
    flags: <unsignedInt>
</code>

=== storageCloudCreate API ===
Creates a new storage cloud comprised of the specified users, resources and chap information.

==== Argument List ====

<code>
    name: <string>
    description: <string>
    userList: <storageCloudSubjectAssoc[]>
    resourceList: <storageCloudResourceAssoc[]>
    parentStorageCloudId: <string>
    tier: <string>
    organization: <string>
    defaultChapUsername: <string>
    defaultChapPassword: <string>
    flags: <unsignedInt>
</code>

=== storageCloudDelete API ===
Deletes a storage cloud, the resources and users will not be deleted.

==== Argument List ====

<code>
    storageCloud: <string>
    flags: <unsignedInt>
</code>

=== storageCloudEnum API ===
Returns a list of all the storage clouds.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== storageCloudGet API ===
Returns information of the specified storage clouds.

==== Argument List ====

<code>
    storageCloud: <string>
    flags: <unsignedInt>
</code>

=== storageCloudModify API ===
Modify the name, description, parent storage cloud, tier, organization, and chap information of a storage cloud.

==== Argument List ====

<code>
    storageCloud: <string>
    name: <string>
    description: <string>
    parentStorageCloudId: <string>
    tier: <string>
    organization: <string>
    defaultChapUsername: <string>
    defaultChapPassword: <string>
    flags: <unsignedInt>
</code>

=== storageCloudResourceAddRemove API ===
Add/Remove one or more resources to the specified storage cloud.

==== Argument List ====

<code>
    storageCloud: <string>
    modType: <unsignedInt>
    resourceList: <storageCloudResourceAssoc[]>
    flags: <unsignedInt>
</code>

=== storageCloudResourceAssocEnum API ===
Returns a list of associated resources of the specified storage cloud.

==== Argument List ====

<code>
    resource: <string>
    flags: <unsignedInt>
</code>

=== storageCloudResourceAssocGet API ===
Returns associated information of specified resource in the storage cloud.

==== Argument List ====

<code>
    storageCloud: <string>
    resource: <string>
    flags: <unsignedInt>
</code>

=== storageCloudResourceSetMode API ===
Set the mode of a specified resource in the storage cloud.

==== Argument List ====

<code>
    storageCloud: <string>
    resource: <string>
    accessMode: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storageCloudSubjectAssocEnum API ===
Returns a list of associated storage clouds to the specified subject.

==== Argument List ====

<code>
    subject: <string>
    flags: <unsignedInt>
</code>

=== storageCloudSubjectAssocGet API ===
Returns associated information of a specified subject for a storage cloud.

==== Argument List ====

<code>
    storageCloud: <string>
    subject: <string>
    flags: <unsignedInt>
</code>

=== storageCloudUserAddRemove API ===
Add/Remove one or more users to the specified storage cloud.

==== Argument List ====

<code>
    storageCloud: <string>
    modType: <unsignedInt>
    userList: <storageCloudSubjectAssoc[]>
    flags: <unsignedInt>
</code>

=== storagePoolCacheAddRemove API ===

==== Argument List ====

<code>
    storagePool: <string>
    modType: <unsignedInt>
    readCacheDeviceList: <string[]>
    writeCacheDeviceList: <string[]>
    flags: <unsignedInt>
</code>

=== storagePoolCreate API ===
Creates a new storage pool from which storage volumes can be created.

==== Argument List ====

<code>
    name: <string>
    physicalDiskList: <string[]>
    description: <string>
    raidType: <unsignedInt>
    poolType: <unsignedInt>
    isDefault: <boolean>
    enableSsd: <boolean>
    enableCompression: <boolean>
    noBarriers: <boolean>
    profile: <string>
    raidSetSize: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storagePoolDestroy API ===
Deletes a storage pool, *WARNING* any data in the pool will be lost.

==== Argument List ====

<code>
    storagePool: <string>
    flags: <unsignedInt>
</code>

=== storagePoolDeviceEnum API ===
Returns a list of all the storage pool devices.

==== Argument List ====

<code>
    storagePoolId: <string>
    flags: <unsignedInt>
</code>

=== storagePoolDeviceGet API ===
Gets information about a specific storage pool device.

==== Argument List ====

<code>
    storagePoolDevice: <string>
    flags: <unsignedInt>
</code>

=== storagePoolEnum API ===
Returns a list of all the storage pools.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== storagePoolExpand API ===
Expands a storage pool after the underlying hardware RAID unit has been grown underneath.

==== Argument List ====

<code>
    storagePool: <string>
    flags: <unsignedInt>
</code>

=== storagePoolExport API ===
Deactivate and removes the storage pool from the storage system database so that it can be exported and used on another system.

==== Argument List ====

<code>
    storagePool: <string>
    flags: <unsignedInt>
</code>

=== storagePoolGet API ===
Gets information about a specific storage pool.

==== Argument List ====

<code>
    storagePool: <string>
    flags: <unsignedInt>
</code>

=== storagePoolGrow API ===
Grows the specified storage pool by adding an additional disk.  You can only grow storage pools that are using the RAID5 or RAID6 layout.

==== Argument List ====

<code>
    storagePool: <string>
    physicalDiskList: <string[]>
    raidType: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storagePoolHaFailoverGroupActivate API ===

==== Argument List ====

<code>
    failoverGroup: <string>
    flags: <unsignedInt>
</code>

=== storagePoolHaFailoverGroupCreate API ===

==== Argument List ====

<code>
    name: <string>
    description: <string>
    storagePoolId: <string>
    primaryStorageSystemId: <string>
    secondaryStorageSystemId: <string>
    failoverModuleId: <string>
    settleTimeInSec: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storagePoolHaFailoverGroupDeactivate API ===

==== Argument List ====

<code>
    failoverGroup: <string>
    flags: <unsignedInt>
</code>

=== storagePoolHaFailoverGroupDelete API ===

==== Argument List ====

<code>
    failoverGroup: <string>
    flags: <unsignedInt>
</code>

=== storagePoolHaFailoverGroupEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== storagePoolHaFailoverGroupFailover API ===

==== Argument List ====

<code>
    failoverGroup: <string>
    targetStorageSystem: <string>
    flags: <unsignedInt>
</code>

=== storagePoolHaFailoverGroupGet API ===

==== Argument List ====

<code>
    failoverGroup: <string>
    flags: <unsignedInt>
</code>

=== storagePoolHaFailoverGroupModify API ===

==== Argument List ====

<code>
    failoverGroup: <string>
    name: <string>
    description: <string>
    secondaryStorageSystemId: <string>
    failoverModuleId: <string>
    settleTimeInSec: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storagePoolHaFailoverInterfaceCreate API ===

==== Argument List ====

<code>
    failoverGroup: <string>
    tag: <string>
    parentInterfaceName: <string>
    description: <string>
    ipAddress: <string>
    gateway: <string>
    subnetMask: <string>
    macAddress: <string>
    iscsiEnabled: <boolean>
    flags: <unsignedInt>
</code>

=== storagePoolHaFailoverInterfaceDelete API ===

==== Argument List ====

<code>
    failoverGroup: <string>
    failoverInterface: <string>
    flags: <unsignedInt>
</code>

=== storagePoolHaFailoverInterfaceEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== storagePoolHaFailoverInterfaceGet API ===

==== Argument List ====

<code>
    failoverGroup: <string>
    failoverInterface: <string>
    flags: <unsignedInt>
</code>

=== storagePoolHaFailoverModuleEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== storagePoolHaFailoverModuleGet API ===

==== Argument List ====

<code>
    failoverModule: <string>
    flags: <unsignedInt>
</code>

=== storagePoolIdentify API ===
Pulses the disk activity lights for all disks in the pool so they can be identified in the chassis.

==== Argument List ====

<code>
    storagePool: <string>
    pattern: <string>
    duration: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storagePoolModify API ===
Modifies the properties of the storage pool such as it's name and description.

==== Argument List ====

<code>
    storagePool: <string>
    newName: <string>
    newDescription: <string>
    isDefault: <boolean>
    enableSsd: <boolean>
    enableCompression: <boolean>
    noBarriers: <boolean>
    profile: <string>
    syncPolicy: <unsignedInt>
    compressionType: <string>
    hotspareRepairPolicy: <unsignedInt>
    copies: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storagePoolProfileEnum API ===
Returns a list of all the storage pool profiles.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== storagePoolProfileGet API ===
Gets information about a specific storage pool profile.

==== Argument List ====

<code>
    storagePoolProfile: <string>
    flags: <unsignedInt>
</code>

=== storagePoolRescan API ===
Rescans the specified storage system for storage pools.

==== Argument List ====

<code>
    storageSystem: <string>
    options: <string>
    flags: <unsignedInt>
</code>

=== storagePoolScrubStart API ===

==== Argument List ====

<code>
    storagePool: <string>
    flags: <unsignedInt>
</code>

=== storagePoolScrubStop API ===

==== Argument List ====

<code>
    storagePool: <string>
    flags: <unsignedInt>
</code>

=== storagePoolSpareAddRemove API ===
Adds/Removes a dedicated hot-spare to the specified storage pool.

==== Argument List ====

<code>
    storagePool: <string>
    modType: <unsignedInt>
    physicalDiskList: <string[]>
    flags: <unsignedInt>
</code>

=== storagePoolStart API ===
Starts up a previously stopped storage pool.

==== Argument List ====

<code>
    storagePool: <string>
    flags: <unsignedInt>
</code>

=== storagePoolStop API ===
Stops all volume activity to the pool and disables it for maintenance.

==== Argument List ====

<code>
    storagePool: <string>
    flags: <unsignedInt>
</code>

=== storagePoolUpdateRedirect API ===

==== Argument List ====

<code>
    storagePool: <string>
    flags: <unsignedInt>
</code>

=== storageQuotaCreate API ===
Creates a new storage quota on a pool for the specified storage cloud.

==== Argument List ====

<code>
    name: <string>
    description: <string>
    storagePoolId: <string>
    storageCloudId: <string>
    provisionableSize: <unsignedLong>
    utilizableSpace: <unsignedLong>
    maxVolumes: <unsignedInt>
    maxShares: <unsignedInt>
    policyFlags: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storageQuotaDelete API ===
Deletes a storage quota, the associated volumes are not deleted.

==== Argument List ====

<code>
    storageQuota: <string>
    flags: <unsignedInt>
</code>

=== storageQuotaEnum API ===
Returns a list of all the storage quotas.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== storageQuotaGet API ===
Returns information about a specific storage quota.

==== Argument List ====

<code>
    storageQuota: <string>
    flags: <unsignedInt>
</code>

=== storageQuotaModify API ===
Modifies one to change the name and/or description of a storage quota.

==== Argument List ====

<code>
    storageQuota: <string>
    name: <string>
    description: <string>
    storageCloudId: <string>
    provisionableSize: <unsignedLong>
    utilizableSpace: <unsignedLong>
    maxVolumes: <unsignedInt>
    maxShares: <unsignedInt>
    policyFlags: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storageQuotaShareAddRemove API ===
Adds/Removes one or more volumes to the specified quota.

==== Argument List ====

<code>
    storageQuota: <string>
    modType: <unsignedInt>
    storageShareList: <string[]>
    flags: <unsignedInt>
</code>

=== storageQuotaShareAssocEnum API ===
Returns a list of all the associated quotas of a specified share.

==== Argument List ====

<code>
    networkShare: <string>
    flags: <unsignedInt>
</code>

=== storageQuotaShareAssocGet API ===
Returns information about the associated quotas of a specified share.

==== Argument List ====

<code>
    storageQuotaId: <string>
    shareId: <string>
</code>

=== storageQuotaVolumeAddRemove API ===
Adds/Removes one or more volumes to the specified quota.

==== Argument List ====

<code>
    storageQuota: <string>
    modType: <unsignedInt>
    storageVolumeList: <string[]>
    flags: <unsignedInt>
</code>

=== storageQuotaVolumeAssocEnum API ===
Returns a list of all the associated quotas of a specified volume.

==== Argument List ====

<code>
    storageVolume: <string>
    flags: <unsignedInt>
</code>

=== storageQuotaVolumeAssocGet API ===
Return information about the associated quotas of a specified volume.

==== Argument List ====

<code>
    storageQuotaId: <string>
    storageVolumeId: <string>
</code>

=== storageSystemClusterAssocEnum API ===
Returns a list of the associated storage system nodes in the grid.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== storageSystemClusterAssocGet API ===
Get general information about the associated storage system management grid.

==== Argument List ====

<code>
    storageSystemClusterId: <string>
    storageSystemId: <string>
    flags: <unsignedInt>
</code>

=== storageSystemClusterCreate API ===
Creates a new management grid.  A given storage system can only be a member of one grid at a time.

==== Argument List ====

<code>
    name: <string>
    description: <string>
    virtualHostName: <string>
    virtualHostIpAddress: <string>
    virtualHostSubnetMask: <string>
    virtualHostGateway: <string>
    targetPort: <string>
    enableGridVif: <boolean>
    gridBindPortAddress: <string>
    gridIndex: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storageSystemClusterDelete API ===
Deletes the management grid.  After the grid is deleted each node in the grid operates independently again.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== storageSystemClusterEnum API ===
Returns a list of all the managed storage system nodes in the grid.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== storageSystemClusterGet API ===
Get general information about the storage system management grid.

==== Argument List ====

<code>
    storageSystemCluster: <string>
    flags: <unsignedInt>
</code>

=== storageSystemClusterGetHostsConfig API ===

==== Argument List ====

<code>
    storageSystem: <string>
    flags: <unsignedInt>
</code>

=== storageSystemClusterModify API ===
Modify the management grid properties.

==== Argument List ====

<code>
    name: <string>
    description: <string>
    virtualHostName: <string>
    virtualHostIpAddress: <string>
    virtualHostSubnetMask: <string>
    virtualHostGateway: <string>
    targetPort: <string>
    enableGridVif: <boolean>
    gridBindPortAddress: <string>
    gridIndex: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storageSystemClusterNodeAdd API ===
Adds the specified storage system to the management grid.

==== Argument List ====

<code>
    nodeIpAddress: <string>
    nodeAdminUsername: <string>
    nodeAdminPassword: <string>
    flags: <unsignedInt>
</code>

=== storageSystemClusterNodeEject API ===
Ejects the specified storage system from the management grid.

==== Argument List ====

<code>
    storageSystemClusterObj: <storageSystemCluster>
    flags: <unsignedInt>
</code>

=== storageSystemClusterNodeJoin API ===
Joins the specified storage system to the management grid.

==== Argument List ====

<code>
    storageSystemClusterObj: <storageSystemCluster>
    masterNode: <storageSystem>
    flags: <unsignedInt>
</code>

=== storageSystemClusterNodeRemove API ===
Removes the specified storage system from the management grid.

==== Argument List ====

<code>
    storageSystemId: <string>
    flags: <unsignedInt>
</code>

=== storageSystemClusterNodeSetMaster API ===
Sets the master node for a storage system.

==== Argument List ====

<code>
    storageSystemId: <string>
    flags: <unsignedInt>
</code>

=== storageSystemClusterNodeSync API ===

==== Argument List ====

<code>
    storageSystemClusterObj: <storageSystemCluster>
    masterNode: <storageSystem>
    flags: <unsignedInt>
</code>

=== storageSystemClusterSetHostsConfig API ===

==== Argument List ====

<code>
    storageSystem: <string>
    targetPortIdList: <string[]>
    options: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storageSystemEnum API ===
Returns a list of all the managed storage systems. This is always a single system unless the system is a member of a management grid.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== storageSystemGet API ===
Get general information about the storage system.

==== Argument List ====

<code>
    storageSystem: <string>
    flags: <unsignedInt>
</code>

=== storageSystemGroupAddRemoveLinks API ===

==== Argument List ====

<code>
    groupId: <string>
    linkIdList: <string[]>
    modType: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storageSystemGroupAssocEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== storageSystemGroupAssocGet API ===

==== Argument List ====

<code>
    groupId: <string>
    linkId: <string>
    flags: <unsignedInt>
</code>

=== storageSystemGroupCreate API ===

==== Argument List ====

<code>
    name: <string>
    description: <string>
    virtualIpAddress: <string>
    groupPassword: <string>
    flags: <unsignedInt>
</code>

=== storageSystemGroupDelete API ===

==== Argument List ====

<code>
    groupId: <string>
    deleteAssociatedLinks: <boolean>
    flags: <unsignedInt>
</code>

=== storageSystemGroupEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== storageSystemGroupGet API ===

==== Argument List ====

<code>
    groupId: <string>
    flags: <unsignedInt>
</code>

=== storageSystemGroupModify API ===

==== Argument List ====

<code>
    groupId: <string>
    name: <string>
    description: <string>
    virtualIpAddress: <string>
    flags: <unsignedInt>
</code>

=== storageSystemGroupSetPassword API ===

==== Argument List ====

<code>
    groupId: <string>
    groupPassword: <string>
    flags: <unsignedInt>
</code>

=== storageSystemLinkCreate API ===
Create a new storage system link so that storage volumes may be replicated between storage systems.

==== Argument List ====

<code>
    storageSystemId: <string>
    remoteSystemId: <string>
    localIpAddress: <string>
    remoteIpAddress: <string>
    bandwidthLimit: <unsignedInt>
    linkType: <unsignedInt>
    description: <string>
    flags: <unsignedInt>
</code>

=== storageSystemLinkDelete API ===
Delete an existing storage system link.

==== Argument List ====

<code>
    linkId: <string>
    flags: <unsignedInt>
</code>

=== storageSystemLinkDisconnect API ===
Disconnect a storage system link.

==== Argument List ====

<code>
    remoteStorageSystemId: <string>
    flags: <unsignedInt>
</code>

=== storageSystemLinkEnum API ===
List the existing storage system remote replication links.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== storageSystemLinkEstablish API ===
Establishes a storage system remote replication link.

==== Argument List ====

<code>
    linkObj: <storageSystemLink>
    flags: <unsignedInt>
</code>

=== storageSystemLinkGet API ===
Get information about the storage system link.

==== Argument List ====

<code>
    linkId: <string>
    flags: <unsignedInt>
</code>

=== storageSystemLinkModify API ===
Modify the properties of the storage system link.

==== Argument List ====

<code>
    linkId: <string>
    remoteIpAddress: <string>
    localIpAddress: <string>
    bandwidthLimit: <unsignedInt>
    linkType: <unsignedInt>
    description: <string>
    flags: <unsignedInt>
</code>

=== storageSystemLinkRefresh API ===
Refreshes a storage system link.

==== Argument List ====

<code>
    linkId: <string>
    flags: <unsignedInt>
</code>

=== storageSystemLinkSetCredentials API ===
Change the credentials for an existing storage system link.

==== Argument List ====

<code>
    linkId: <string>
    remoteAdminUser: <string>
    remoteAdminPassword: <string>
    flags: <unsignedInt>
</code>

=== storageSystemLinkVerify API ===

==== Argument List ====

<code>
    linkObj: <storageSystemLink>
    flags: <unsignedInt>
</code>

=== storageSystemModify API ===
Modifies the name and/or description of the storage system.

==== Argument List ====

<code>
    storageSystem: <string>
    newName: <string>
    newDescription: <string>
    newLocation: <string>
    domainSuffix: <string>
    searchSuffix: <string>
    arpFilterMode: <unsignedInt>
    bondMode: <unsignedInt>
    newDnsServerList: <string[]>
    externalHostName: <string>
    gridPreferredPort: <string>
    flags: <unsignedInt>
</code>

=== storageSystemRecover API ===

==== Argument List ====

<code>
    storageSystem: <string>
    recoveryPoint: <string>
    recoverNetworkConfig: <boolean>
    flags: <unsignedInt>
</code>

=== storageSystemRecoveryPointEnum API ===
Returns a list of all the available system meta data recovery points.  Recovery points allow you to restore system information such as network, host, users, and other system information from a prior automatic backup.

==== Argument List ====

<code>
    storageSystem: <string>
    flags: <unsignedInt>
</code>

=== storageSystemRestart API ===
Restarts the entire storage system.

==== Argument List ====

<code>
    storageSystem: <string>
    flags: <unsignedInt>
</code>

=== storageSystemSendLogs API ===

==== Argument List ====

<code>
    storageSystemId: <string>
    flags: <unsignedInt>
</code>

=== storageSystemServicesRestart API ===

==== Argument List ====

<code>
    storageSystem: <string>
    servicesList: <string>
    flags: <unsignedInt>
</code>

=== storageSystemShutdown API ===
Shutdown the storage system.

==== Argument List ====

<code>
    storageSystem: <string>
    flags: <unsignedInt>
</code>

=== storageSystemUpdateCheck API ===
Checks for updates for specified storage system.

==== Argument List ====

<code>
    storageSystem: <string>
    flags: <unsignedInt>
</code>

=== storageSystemUpgrade API ===
Upgrade to the latest version of the core packages.

==== Argument List ====

<code>
    storageSystem: <string>
    upgradeManager: <boolean>
    upgradeService: <boolean>
    upgradeTarget: <boolean>
    upgradeWebServer: <boolean>
    flags: <unsignedInt>
</code>

=== storageTierAssocEnum API ===

==== Argument List ====

<code>
    storagePool: <string>
    flags: <unsignedInt>
</code>

=== storageTierAssocGet API ===

==== Argument List ====

<code>
    storageTierId: <string>
    storagePoolId: <string>
</code>

=== storageTierCreate API ===

==== Argument List ====

<code>
    name: <string>
    description: <string>
    storageClass: <string>
    storageType: <unsignedInt>
    performanceLevel: <unsignedInt>
    poolList: <string[]>
    flags: <unsignedInt>
</code>

=== storageTierDelete API ===

==== Argument List ====

<code>
    storageTier: <string>
    flags: <unsignedInt>
</code>

=== storageTierEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== storageTierGet API ===

==== Argument List ====

<code>
    storageTier: <string>
    flags: <unsignedInt>
</code>

=== storageTierModify API ===

==== Argument List ====

<code>
    storageTier: <string>
    newName: <string>
    description: <string>
    storageClass: <string>
    storageType: <unsignedInt>
    performanceLevel: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storageTierPoolAddRemove API ===

==== Argument List ====

<code>
    storageTier: <string>
    modType: <unsignedInt>
    poolList: <string[]>
    flags: <unsignedInt>
</code>

=== storageVolumeAclAddRemove API ===
Enables/Disables access to the specific volume from the specified host.

==== Argument List ====

<code>
    storageVolume: <string>
    modType: <unsignedInt>
    hostList: <string[]>
    flags: <unsignedInt>
</code>

=== storageVolumeAclAddRemoveEx API ===
Enables access to the specific volume from the specified host.

==== Argument List ====

<code>
    host: <string>
    modType: <unsignedInt>
    storageVolumeList: <string[]>
    flags: <unsignedInt>
</code>

=== storageVolumeAclEnum API ===
Returns a list of all the volume to host assignments, optionally filtered by host or storage volume.

==== Argument List ====

<code>
    host: <string>
    storageVolume: <string>
    flags: <unsignedInt>
</code>

=== storageVolumeAclGet API ===
Gets the assignment information for specified host or storage volume.

==== Argument List ====

<code>
    host: <string>
    storageVolume: <string>
    flags: <unsignedInt>
</code>

=== storageVolumeClone API ===
Creates a complete block copy of the source volume.

==== Argument List ====

<code>
    storageVolume: <string>
    cloneName: <string>
    description: <string>
    provisionableId: <string>
    accessMode: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storageVolumeCloudBackupCreate API ===

==== Argument List ====

<code>
    sourceVolumeId: <string>
    cloudContainerId: <string>
    backupVolumeName: <string>
    backupVolumeDescription: <string>
    priority: <unsignedInt>
    reserved: <string>
    flags: <unsignedInt>
</code>

=== storageVolumeCloudBackupRestore API ===

==== Argument List ====

<code>
    sourceVolumeId: <string>
    storagePoolId: <string>
    recoveredVolumeName: <string>
    recoveredVolumeDescription: <string>
    priority: <unsignedInt>
    reserved: <string>
    flags: <unsignedInt>
</code>

=== storageVolumeCreate API ===
Creates a new storage volume in the specified storage pool.

==== Argument List ====

<code>
    name: <string>
    description: <string>
    provisionableId: <string>
    size: <unsignedLong>
    thinProvisioned: <boolean>
    accessMode: <unsignedInt>
    chapPolicy: <unsignedInt>
    chapUsername: <string>
    chapPassword: <string>
    count: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storageVolumeCreateEx API ===

==== Argument List ====

<code>
    name: <string>
    description: <string>
    provisionableId: <string>
    size: <unsignedLong>
    percentReserved: <unsignedInt>
    accessMode: <unsignedInt>
    chapPolicy: <unsignedInt>
    chapUsername: <string>
    chapPassword: <string>
    count: <unsignedInt>
    blockSizeKb: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storageVolumeDelete API ===
Deletes a storage volume, *WARNING* any data in the volume will be lost.

==== Argument List ====

<code>
    storageVolumeList: <string[]>
    recursivelyDeleteSnapshots: <boolean>
    flags: <unsignedInt>
</code>

=== storageVolumeDeleteEx API ===

==== Argument List ====

<code>
    storageVolume: <string>
    flags: <unsignedInt>
</code>

=== storageVolumeEnum API ===
Returns a list of all the storage volumes.

==== Argument List ====

<code>
    storageVolumeList: <string[]>
    flags: <unsignedInt>
</code>

=== storageVolumeGet API ===
Returns information about a specific storage volume.

==== Argument List ====

<code>
    storageVolume: <string>
    flags: <unsignedInt>
</code>

=== storageVolumeGroupAssocEnum API ===

==== Argument List ====

<code>
    storageVolume: <string>
    flags: <unsignedInt>
</code>

=== storageVolumeGroupAssocGet API ===

==== Argument List ====

<code>
    storageVolumeGroupId: <string>
    storageVolumeId: <string>
</code>

=== storageVolumeGroupClone API ===
Creates a complete block by block copy of all volumes in the group.

==== Argument List ====

<code>
    storageVolumeGroup: <string>
    cloneNamePrefix: <string>
    description: <string>
    provisionableId: <string>
    accessMode: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storageVolumeGroupCreate API ===
Creates a new storage volume group comprised of the specified storage volumes.

==== Argument List ====

<code>
    name: <string>
    description: <string>
    storageVolumeList: <string[]>
    flags: <unsignedInt>
</code>

=== storageVolumeGroupDelete API ===
Deletes a storage volume group, the volumes are not deleted unless the delete-volumes flag is set.

==== Argument List ====

<code>
    storageVolumeGroup: <string>
    deleteAssociatedVolumes: <boolean>
    flags: <unsignedInt>
</code>

=== storageVolumeGroupEnum API ===
Returns a list of all the storage volume groups.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== storageVolumeGroupGet API ===
Returns information about a specific storage volume group.

==== Argument List ====

<code>
    storageVolumeGroup: <string>
    flags: <unsignedInt>
</code>

=== storageVolumeGroupModify API ===
Modifies the name and/or description of a storage volume group.

==== Argument List ====

<code>
    storageVolumeGroup: <string>
    newName: <string>
    newDescription: <string>
    flags: <unsignedInt>
</code>

=== storageVolumeGroupSnapshot API ===
Creates a space efficient copy of all volumes in the group.

==== Argument List ====

<code>
    storageVolumeGroup: <string>
    snapshotNamePrefix: <string>
    description: <string>
    provisionableId: <string>
    count: <unsignedInt>
    accessMode: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storageVolumeGroupVolumeAddRemove API ===
Adds/Removes one or more volumes to the specified volume group.

==== Argument List ====

<code>
    storageVolumeGroup: <string>
    modType: <unsignedInt>
    storageVolumeList: <string[]>
    flags: <unsignedInt>
</code>

=== storageVolumeImport API ===

==== Argument List ====

<code>
    storagePool: <string>
    importTypes: <unsignedInt>
    cleanupSnapshots: <boolean>
    replicationScheduleId: <string[]>
    flags: <unsignedInt>
</code>

=== storageVolumeModify API ===
Modifies a the name, description or other properties of the storage volume.

==== Argument List ====

<code>
    storageVolume: <string>
    newName: <string>
    newDescription: <string>
    newAccessMode: <unsignedInt>
    chapPolicy: <unsignedInt>
    chapUsername: <string>
    chapPassword: <string>
    clearSnapshotFlag: <boolean>
    enableCaching: <boolean>
    isActiveCheckpoint: <boolean>
    syncPolicy: <unsignedInt>
    compressionType: <string>
    copies: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storageVolumeResize API ===
Resizes a storage volume to make it larger, volumes cannot be reduced in size.

==== Argument List ====

<code>
    storageVolume: <string>
    provisionableId: <string>
    newSizeInBytes: <unsignedLong>
    flags: <unsignedInt>
</code>

=== storageVolumeRestore API ===
Restores a storage volume to a previous point in time using a snapshot.

==== Argument List ====

<code>
    storageVolume: <string>
    snapshotVolume: <string>
    flags: <unsignedInt>
</code>

=== storageVolumeRollback API ===

==== Argument List ====

<code>
    storageVolume: <string>
    snapshotVolume: <string>
    flags: <unsignedInt>
</code>

=== storageVolumeSnapshot API ===
Creates a space efficient copy of the source volume.

==== Argument List ====

<code>
    storageVolume: <string>
    snapshotName: <string>
    description: <string>
    provisionableId: <string>
    accessMode: <unsignedInt>
    count: <unsignedInt>
    flags: <unsignedInt>
</code>

=== storageVolumeUtilizationEnum API ===
Returns volume utilization information for a specific storage volume or all storage volumes if no volume is specified.

==== Argument List ====

<code>
    storageVolume: <string>
    flags: <unsignedInt>
</code>

=== storageVolumeUtilizationGet API ===
Returns a specific volume utilization metrics for a single volume and specific date.

==== Argument List ====

<code>
    utilizationId: <string>
    flags: <unsignedInt>
</code>

=== storageVolumeUtilizationGetRetentionPeriod API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== storageVolumeUtilizationSetRetentionPeriod API ===

==== Argument List ====

<code>
    daysToRetain: <unsignedInt>
    flags: <unsignedInt>
</code>

=== targetPortDisable API ===
Disables the specified target port.

==== Argument List ====

<code>
    port: <string>
    flags: <unsignedInt>
</code>

=== targetPortEnable API ===
Enables the specified target port.

==== Argument List ====

<code>
    port: <string>
    flags: <unsignedInt>
</code>

=== targetPortEnum API ===
Returns a list of all the target ports in the system.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== targetPortGet API ===
Returns information about the specified target port.

==== Argument List ====

<code>
    port: <string>
    flags: <unsignedInt>
</code>

=== targetPortModify API ===
Modifies target port settings including IP address, gateway, mtu, etc.

==== Argument List ====

<code>
    port: <string>
    configType: <string>
    ipAddress: <string>
    netmask: <string>
    gateway: <string>
    mtu: <unsignedInt>
    iscsiEnabled: <boolean>
    description: <string>
    vportFloatList: <string[]>
    bondMode: <unsignedInt>
    flags: <unsignedInt>
</code>

=== targetPortRescan API ===
Discovers new target ports and/or any manual modifications made to the configuration of the target ports.

==== Argument List ====

<code>
    storageSystem: <string>
    flags: <unsignedInt>
</code>

=== targetPortRestart API ===
Restarts the specified target port.

==== Argument List ====

<code>
    port: <string>
    flags: <unsignedInt>
</code>

=== targetVirtualInterfaceCreate API ===
Creates a new virtual network interface which is linked to a physical network port.

==== Argument List ====

<code>
    storageSystemId: <string>
    parentPortId: <string>
    ipAddress: <string>
    netmask: <string>
    gateway: <string>
    macAddress: <string>
    portList: <string[]>
    mtu: <unsignedInt>
    description: <string>
    flags: <unsignedInt>
</code>

=== targetVirtualInterfaceMove API ===
Moves the specified virtual network interface to a different physical network port.

==== Argument List ====

<code>
    virtualInterfaceId: <string>
    targetPortId: <string>
    flags: <unsignedInt>
</code>

=== targetVirtualPortCreate API ===

==== Argument List ====

<code>
    storageSystemId: <string>
    ipAddress: <string>
    netmask: <string>
    gateway: <string>
    macAddress: <string>
    portList: <string[]>
    mtu: <unsignedInt>
    description: <string>
    bondMode: <unsignedInt>
    flags: <unsignedInt>
</code>

=== targetVirtualPortDelete API ===

==== Argument List ====

<code>
    port: <string>
    flags: <unsignedInt>
</code>

=== targetVlanInterfaceCreate API ===

==== Argument List ====

<code>
    storageSystemId: <string>
    parentPortId: <string>
    ipAddress: <string>
    netmask: <string>
    gateway: <string>
    vlanId: <unsignedInt>
    vlanQos: <unsignedInt>
    mtu: <unsignedInt>
    description: <string>
    flags: <unsignedInt>
</code>

=== taskCancel API ===
Cancels the specified task that is in the queue or is running.

==== Argument List ====

<code>
    id: <string>
    flags: <unsignedInt>
</code>

=== taskClearAll API ===
Clears all the completed and/or failed tasks.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== taskEnum API ===
Returns a list of all the tasks including active, completed, and failed tasks.

==== Argument List ====

<code>
    taskIdlist: <string[]>
    flags: <unsignedInt>
</code>

=== taskGet API ===
Returns information about the specified task.

==== Argument List ====

<code>
    id: <string>
    flags: <unsignedInt>
</code>

=== taskUpdateProgress API ===

==== Argument List ====

<code>
    taskId: <string>
    description: <string>
    progress: <unsignedInt>
    state: <unsignedInt>
    flags: <unsignedInt>
</code>

=== traceLevelGet API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== traceLevelModify API ===

==== Argument List ====

<code>
    traceLevel: <unsignedInt>
    stdOut: <boolean>
    traceFilter: <string[]>
    flags: <unsignedInt>
</code>

=== userAdd API ===
Adds a new user to the system. User accounts can access QuantaStor via the web management interface, remote scripting and via the qstorapi RESTful API.

==== Argument List ====

<code>
    username: <string>
    password: <string>
    role: <string>
    firstName: <string>
    lastName: <string>
    emailAddress: <string>
    description: <string>
    defaultChapUsername: <string>
    defaultChapPassword: <string>
    alertSubscriptions: <unsignedInt>
    flags: <unsignedInt>
</code>

=== userEnum API ===
Returns a list of all the users.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== userGet API ===
Gets information about the specified user.

==== Argument List ====

<code>
    user: <string>
    flags: <unsignedInt>
</code>

=== userGroupAssocEnum API ===

==== Argument List ====

<code>
    user: <string>
    flags: <unsignedInt>
</code>

=== userGroupAssocGet API ===

==== Argument List ====

<code>
    userGroupId: <string>
    userId: <string>
</code>

=== userGroupCreate API ===
Creates a new storage user group comprised of the specified storage users.

==== Argument List ====

<code>
    name: <string>
    description: <string>
    userList: <string[]>
    flags: <unsignedInt>
</code>

=== userGroupDelete API ===
Deletes a storage user group, the users are not deleted unless the delete-users flag is set.

==== Argument List ====

<code>
    userGroup: <string>
    flags: <unsignedInt>
</code>

=== userGroupEnum API ===
Returns a list of all the storage user groups.

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== userGroupGet API ===
Returns information about a specific storage user group.

==== Argument List ====

<code>
    userGroup: <string>
    flags: <unsignedInt>
</code>

=== userGroupModify API ===
Modifies the name and/or description of a storage user group.

==== Argument List ====

<code>
    userGroup: <string>
    newName: <string>
    newDescription: <string>
    flags: <unsignedInt>
</code>

=== userGroupUserAddRemove API ===
Adds/Removes one or more users to the specified user group.

==== Argument List ====

<code>
    userGroup: <string>
    modType: <unsignedInt>
    userList: <string[]>
    flags: <unsignedInt>
</code>

=== userModify API ===
Modifies the name and/or description of a storage user group.

==== Argument List ====

<code>
    user: <string>
    newName: <string>
    newRole: <string>
    newFirstName: <string>
    newLastName: <string>
    newEmailAddress: <string>
    newDescription: <string>
    newDefaultChapUsername: <string>
    newDefaultChapPassword: <string>
    alertSubscriptions: <unsignedInt>
    flags: <unsignedInt>
</code>

=== userPasswordSet API ===
Sets a new password for specified user.

==== Argument List ====

<code>
    user: <string>
    oldPassword: <string>
    newPassword: <string>
    flags: <unsignedInt>
</code>

=== userRemove API ===
Removes specified user.

==== Argument List ====

<code>
    user: <string>
    flags: <unsignedInt>
</code>

=== virtualInterfaceAssocEnum API ===

==== Argument List ====

<code>
    flags: <unsignedInt>
</code>

=== virtualInterfaceAssocGet API ===

==== Argument List ====

<code>
    virtualInterfaceId: <string>
    targetPortId: <string>
    flags: <unsignedInt>
</code>

=== widgetCreate API ===

==== Argument List ====

<code>
    name: <string>
    flags: <unsignedInt>
</code>