Network Configuration: Difference between revisions

From OSNEXUS Online Documentation Site
Jump to navigation Jump to search
VisualWikitext
Created page with "Category:start_guide The most common initial configuration step is to apply static IP addresses to your network ports. QuantaStor will initially get an IP address from y..."
 
m redirect to Network Ports, which owns static vs DHCP addressing in far more depth (QSTOR-12352)
Tag: New redirect
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[Category:start_guide]]
#REDIRECT [[Network Ports]]
 
The most common initial configuration step is to apply static IP addresses to your network ports.  QuantaStor will initially get an IP address from your DHCP server but this is intended only to assist with the initial setup and installation process.  DHCP allocated IP addresses can change so they're not to be used with your storage system unless you've statically assigned DHCP addresses. Even then we don't recommend the use of DHCP as your system needs to be able to boot even if the DHCP server is offline or inaccessible.
 
This can be completed quickly using the [[Network Port Modify | Network Configuration]] button in the Manager, but also can be found via right-clicking inside the ''Network Ports'' tab, visible when "Storage System" is selected under "Storage Management".
 
[[File:Basic Setup Net Cnfg.jpg | 512px | Network Configuration]]
 
For more information on the password, refer to the [[Network Port Modify]] page.

Latest revision as of 03:44, 4 September 2026

Redirect to:

Retrieved from "https://wiki.osnexus.com/index.php?title=Network_Configuration&oldid=27823"