Guides:Index: Difference between revisions

From OSNEXUS Online Documentation Site
Jump to navigation Jump to search
m osn-seo-utilities: regenerate index
m osn-seo-utilities: regenerate index
Line 9: Line 9:
* '''[[Guides:Fibre Channel and iSCSI Block Storage with ALUA Multipathing|Fibre Channel and iSCSI Block Storage with ALUA Multipathing]]''' — QuantaStor presents storage volumes as block LUNs over Fibre Channel, through QLogic host bus adapters running in target mode, and over iSCSI, and it reports each path's state to the host with ALUA (Asymmetric Logical Unit Access).
* '''[[Guides:Fibre Channel and iSCSI Block Storage with ALUA Multipathing|Fibre Channel and iSCSI Block Storage with ALUA Multipathing]]''' — QuantaStor presents storage volumes as block LUNs over Fibre Channel, through QLogic host bus adapters running in target mode, and over iSCSI, and it reports each path's state to the host with ALUA (Asymmetric Logical Unit Access).
* '''[[HA Cluster Setup (JBODs)|HA Cluster Setup (JBODs)]]''' — [[Category:admin_guide]] ''_TOC_''
* '''[[HA Cluster Setup (JBODs)|HA Cluster Setup (JBODs)]]''' — [[Category:admin_guide]] ''_TOC_''
* '''[[Hardware Controllers & Enclosures|Hardware Controllers & Enclosures]]''' — [[Category:admin_guide]]
* '''[[High-availability VIF Management|High-availability VIF Management]]''' — Cluster virtual interfaces (VIFs) are floating IP addresses that move between the appliances of a site cluster so that a service address stays reachable when the appliance hosting it fails.
* '''[[High-availability VIF Management|High-availability VIF Management]]''' — Cluster virtual interfaces (VIFs) are floating IP addresses that move between the appliances of a site cluster so that a service address stays reachable when the appliance hosting it fails.
* '''[[ISCSI Target Configuration|ISCSI Target Configuration]]''' — QuantaStor presents each Storage Volume to iSCSI clients as its own target, with its own IQN, on the network ports you allow for iSCSI.
* '''[[ISCSI Target Configuration|ISCSI Target Configuration]]''' — QuantaStor presents each Storage Volume to iSCSI clients as its own target, with its own IQN, on the network ports you allow for iSCSI.

Revision as of 18:30, 13 October 2026

Practical, in-depth guides to designing and running QuantaStor storage. Each guide links to the reference documentation for the features it covers.

Guides