+ CLI Guide Overview
The QuantaStor command line interface (CLI) can be used to remotely manage your QuantaStor based systems via a Windows or Linux system, and it is also a powerful tool for scripting the configuration and provisioning of storage volumes, network shares, and other resources. The command line utility for managing your QuantaStor system is called simply 'qs'. You can run 'qs' after logging into your QuantaStor system via an SSH connection, or you can download the QuantaStor Remote CLI client installer for Windows which is available for download from the OSNEXUS web site.
- 1 How to use the CLI
- 2 Output Modes
- 3 Built-in CLI Help
- 4 Remote System Specification
- 5 Command Error Code Definitions
- 6 Usage Examples
- 7 Help Commands
- 8 CLI Overview
- 9 CLI Command Reference Versions
How to use the CLI
QuantaStor CLI is a full featured interface into all of the QuantaStor management features and can communicates with the local core management service as well as remote storage systems.
It is important to note that running the qs CLI locally as root affords no additional access privileges. Each command run via the CLI must include the --server specification which includes which server and what credentials should be used to access the system with.
Authentication via --server Argument
All CLI commands accept the server specification argument which is of this form:
If you do not specify a username or password it will try to use the defaults which are 'admin' and 'password'.
Authentication via QS_SERVER Environment Variable
Rather than having to specify the --server argument over and over again you can set an environment variable once then it will use this as the default system IP address and credentials. The form of the variable is like so:
export QS_SERVER=localhost,admin,password export QS_SERVER=10.0.5.10,admin,mypass123 export QS_SERVER=myhostname.domain.net,mike,mypass123
Authentication via .qs.cnf Configuration File
Finally, rather than using an environment variable you can also create a file in your home directory called .qs.cnf with your credentials in it. Here's an example of how to create the file:
echo "192.168.0.10,admin,password" > ~/.qs.cnf chmod 600 ~/.qs.cnf
The general usage format for all CLI commands is as follows:
qs command <-mandatory-arg=val> [-optional-arg=val] [-flags=force,async,...] [-server=ipaddress[,username,password]] [-xml] [-min]
As you read through the CLI documentation note that all arguments that are specified in angle backets <> are mandatory required arguments. Arguments in square brackets  are optional and you'll generally see the default argument specified in the documentation. Note that the qs CLI is installed on your QuantaStor system so you can run it from there, or from a Windows system using our Remote Management CLI Installer found on the downloads page. All commands can be run against a remote QuantaStor storage system using the --server= argument as outlined above.
Note also that anytime you must specify an object argument like host= volume= share= or others you can refer to the object by name or by its unique ID (UUID). For scripting it is always best to be more exact and use the UUID but it can be a big time-saver to be able to refer to objects by name as well, hence this capability.
XML Output Mode
Use --xml with any command to get the results in XML. Example:
qs disk-list --server=localhost,admin,password --xml qs volume-list --server=localhost,admin,password
Minimal Output Mode
Use --min with any list or enumeration command where you want the results in a more compact format.
You can use the qs command line utility in an interactive mode where you will not have to run it from the shell each time. To enter the interactive mode just run the CLI like so:
To exit the interactive command line mode simply press CTRL-C to exit.
Built-in CLI HelpAll of the commands covered in the documentation are also documented within the command line utility itself. Simply run the CLI with the 'help' argument to get the full list of all the different CLI commands. This list is pretty long so it's often best to pipe it to more
qs help | more.
You can also use the help system to get information on a specific command:
qs help command=CMD-NAME
As an example you can get help on how to use the pool-create command like so:
qs help command=pool-create
Another way to get information on a group of commands is to specify a category. Help will then be printed for all commands that have a partial name match to the category specified. For example, to see all the commands that have 'pool' in their name:
qs help category=pool
Or to see all list or get commands:
qs help category=list qs help category=get
In this way you can reduce down help results to just what you need.
Remote System Specification
You can use the CLI to manage remote QuantaStor systems, but in such cases you'll need to specify the IP address and username/password of the remote storage system using the 'server' argument.
qs command [--server=ipaddress[,username,password]] [command-args] example: qs disk-list --server=192.168.0.88,admin,password --xml
Note that the The service specification must be comma delimited with no spaces. If no username and password are supplied the default Administrator username 'admin' and the default password 'password' will be tried.
Command Error Code Definitions
For all commands a 0 is returned for SUCCESS and a non-zero error code is returned if there is a command failure. Use the --xml mode to get verbose detail on the error. Full list of error codes are available here.
It's always nice to see some common examples of how the CLI can be used so here's a number of commands so you can see the general syntax of how the CLI is used. You'll notice that sometimes we specify arguments with a single hyphen (-), other times with the double hyphen (--) and sometimes it is omitted. All three are supported. The only hard rule is that the command name must be the first argument after the 'qs' command-line utility name. After that the arguments can be specified in any order with or without hyphens.
qs help -min qs pool-list qs volume-list -xml qs volume-create name=vol1 size=100G pool=pool0 qs volume-create vol1 100G pool0 -xml --server=192.168.0.88,admin,password
- Display help for all commands. 'qs help' provides a verbose listing of all commands with their input parameters. Use 'qs help --min' for a compacted list of commands, or use 'qs help --category=<some category>' for help on aspecific category or command (for example, 'qs help --category=volume').
qs help|h [--command=value ] [--category=value ] [--wiki=value ] [--api=value ]
|command||A specific CLI command to get detailed help with.|
|category||Category of commands to get help with (acl, alert, host, host-group, license, role, session, schedule, pool, quota, system, volume, volume-group, task, user, user-group).|
|wiki||Generates help output in a format that's importable into MediaWiki.|
|api||Generates help output in a parsable format for automating API.|
- List of commands for tab completion
qs tc-commands [--command=value ]
|command||Command to show method args for.|
The Command Reference covers the complete list of all operations accessible via the qs CLI utility (available on Linux, Windows, and is installed within the system). All commands (with few exceptions) are available via the QuantaStor REST API, QuantaStor CLI, and QuantaStor Web Management interface. The CLI includes an XML output mode which can be utilized to integrate with scripts and other automated systems but for more advanced integrations we recommend using the QuantaStor REST API. CLI commands have a short name and long time. When developing scripts it is recommended to use the long command names as it makes scripts easier to read and maintain.
CLI Command Reference Versions
Each new release of QuantaStor CLI generates an updated specification which can be found below. All effort is made to maintain backward compatibility between versions but we recommend that the XML mode be used for scripting.
CHANGES: Adds commands for disk-multipath-config-add/list/remove/scan, site-cluster-restart-services, pool-add-write-log, pool-remove-write-log, replica-report-entry-get/list, replica-report-summary-get/list/delete, password-policy-get/set, share-session-get/list. session-list/get/close was renamed to volume-session-list/get/close, target-port commands are now network-port commands. To maintain backward compatibility the old command names still work but are marked as deprecated.
NOTES: QuantaStor v4.2 introduces new CLI commands for creation of pass-thru Storage Volumes so that NVMe and other physical devices and be presented directly to HA control nodes via iSCSI/FC. Additionally new commands are added for creation of Network Share aliases and sub-shares.