Network Port Create VLAN: Difference between revisions

From OSNEXUS Online Documentation Site
Jump to navigation Jump to search
VisualWikitext
Created page with "For tagged VLANs you can create custom virtual interfaces in QuantaStor using this dialog. QoS stands for Quality of Service, 0 is the default and is 'best effort' followed b..."
 
m Redirect this dialog help page to the Administrator Guide section that documents it (QSTOR-12352). These pages were generated and contain unverified detail; the Help button URL is unchanged, so deployed appliances now land on verified content.
Tag: New redirect
 
(32 intermediate revisions by the same user not shown)
Line 1: Line 1:
For tagged VLANs you can create custom virtual interfaces in QuantaStor using this dialog.  QoS stands for Quality of Service, 0 is the default and is 'best effort' followed by 1-7, 1 being the lowest, 7 the highest.
#REDIRECT [[Network Ports#VLAN interfaces]]
 
NOTE: VLAN interfaces cannot be created on top of bonded interfaces, virtual interfaces, or other VLAN interfaces.  So if you see a ":", a "." or the word "bond" in the name of the interface it is not suitable for creating a VLAN interface on top.  You should also have a valid IP address assigned to the underlying physical port before creating a VLAN.  For example, if you're going to create VLAN eth0.5 be sure to assign an IP address to eth0 first. If you don't want any traffic to flow to the eth0 interface you can assign it an IP address to a network that is not in use. (perhaps something like: 10.127.127.127/255.255.255.248)
 
 
[[File:Create VLAN Intf.jpg]]
 
 
 
{{Template:ReturnToWebGuide}}
[[Category:QuantaStor4]]
[[Category:WebUI Dialog]]

Latest revision as of 05:22, 4 September 2026

Redirect to:

Retrieved from "https://wiki.osnexus.com/index.php?title=Network_Port_Create_VLAN&oldid=28063"