Storage Pool Recover: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| Line 1: | Line 1: | ||
If you are using hardware RAID then you will mark hot-spare disks in the 'Hardware Enclosures & Controllers' section. This is the most common way of managing spare disk drives but you can also designate spares at the software RAID level using this dialog if you're using software RAID5/6/10/Z/Z2. | If you are using hardware RAID then you will mark hot-spare disks in the 'Hardware Enclosures & Controllers' section. This is the most common way of managing spare disk drives but you can also designate spares at the software RAID level using this dialog if you're using software RAID5/6/10/Z/Z2. | ||
'''Navigation:''' Storage Management --> Storage Pools --> Storage Pool --> Add Hot- | '''Navigation:''' Storage Management --> Storage Pools --> Storage Pool --> Add Hot-Spare(s) ''(toolbar)'' | ||
[[File:Recover a Storage Pool.jpg|512px]] | [[File:Recover a Storage Pool.jpg|512px]] | ||
| Line 8: | Line 8: | ||
{{Template:ReturnToWebGuide}} | {{Template:ReturnToWebGuide}} | ||
[[Category: | [[Category:QuantaStor6]] | ||
[[Category:WebUI Dialog]] | [[Category:WebUI Dialog]] | ||
Revision as of 22:38, 13 December 2022
If you are using hardware RAID then you will mark hot-spare disks in the 'Hardware Enclosures & Controllers' section. This is the most common way of managing spare disk drives but you can also designate spares at the software RAID level using this dialog if you're using software RAID5/6/10/Z/Z2.
Navigation: Storage Management --> Storage Pools --> Storage Pool --> Add Hot-Spare(s) (toolbar)
