QuantaStor Version ChangeLog: Difference between revisions

From OSNEXUS Online Documentation Site
Jump to navigation Jump to search
m Update security notices (qsn update)
 
(934 intermediate revisions by 3 users not shown)
Line 1: Line 1:
= ChangeLog =
[[Category:Support guide]]
The change log contains a detailed summary of the changes made for each new release of QuantaStor.  For information on how to upgrade your storage system please see the [[QuantaStor Upgrade Guide|Upgrade Guide]].
= Change Log Overview =
The change log contains a detailed summary of the changes made for each new release of QuantaStor.  Each change made to QuantaStor is tracked with an engineering ticket number in the form '''[QSTOR-NNNN]'''.  This information is provided so that if you're working with OSNexus support you can track the availability of a given product feature add, improvement, or maintenance fix to a specific release.  For information on how to upgrade your storage system please see the [[QuantaStor Upgrade Guide|Upgrade Guide]].


== v3.9.0.55XX (available January 31st 2013) ==
== Versioning System ==
* Early access ISO image: [https://s3.amazonaws.com/qstor-downloads/osn_quantastor_v3.9.0.5545.iso osn_quantastor_v3.9.0.5550.iso]
QuantaStor version numbers consist of four (4) parts. A major number (M), minor number (N), maintenance update number (U) and build number (B) of the form M.N.U.B such as 6.0.2.006.
* Early access packages:
** wget https://s3.amazonaws.com/qstor-downloads/qstorservice_3.9.0.5550-1_amd64.deb
** wget https://s3.amazonaws.com/qstor-downloads/qstormanager_3.9.0.5550-1_all.deb
* adds customizable storage volume block size in 'Create Storage Volume..' dialog under 'Advanced Settings'.
* adds support for multipath connections to back-end storage for dual-path HBA connectivity / also for FC gateway mode
* adds SNMP agent with get/walk/trap support
* adds dialog for 'Attach Gluster Peer' for customizing Gluster peer connections to use specific ports/interfaces
* adds compression ratio information to volume, share, and pool properties
* adds secondary port discovery for manually created virtual interfaces which show up in 'ip addr' but not 'ifconfig'
* adds HA virtual network interfaces for Gluster volumes
* adds revised layout (grid aware) for all network management dialogs
* fix for local user synchronization across grid nodes for Gluster/CIFS support
* fix for CIFS/NFS configuration synchronization across grid nodes for Gluster
* fix for create grid to speed it up
* fixes for Japanese localization
* fixes for SAS HBA based HA support
* deprecates / removes btrfs pool type option from Create Storage Pool in web UI, still available from CLI


== v3.8.2.5441 (December 19th 2013) ==
QuantaStor upgrades go directly from whatever version you are running to the latest version, with no interim steps so for example if you are at v6.0.1 you will upgrade directly to the latest version which may be v6.1.2
* adds initial support for Samba4/SMB3.
** Note that an [http://wiki.osnexus.com/mediawiki/index.php/QuantaStor_Administrators_Guide#Samba_v4_.2F_SMB3_Support additional installation step] is required to upgrade.
* adds 'zvolutil repair' command for fixing bad blocks/checksums in ZFS ZVOLs, [http://wiki.osnexus.com/mediawiki/index.php/QuantaStor_Troubleshooting_Guide#Fixing_ZFS_bad_sectors_.2F_ZVOL_checksum_repair_process more info here.]
* fix to RBAC role modify operation
* fix to multi-tenancy support to add Network Shares as a cloud resource type
* fix to Amazon S3 / add custom locations support


== v3.8.1.5360 (December 3rd 2013) ==
== Product Update Types ==
* fixes for storage volume clone operation
* fixes for manual HA failover support
* fixes for grid synchronization logic


== v3.8.0.5335 (November 22nd 2013) ==
==== Major Updates (X.y.z) ====
* [http://downloads.osnexus.com/osn_quantastor_v3.8.0.5335.iso osn_quantastor_v3.8.0.5335.iso]
If the first digit in the version number has changed this indicates a major product release such as QuantaStor v5 to QuantaStor v6. Major releases generally come with a new underlying Linux platform as the basis. For example, the standard ISO install for QuantaStor v5 is based on Ubuntu 18.04 whereas QuantaStor v6 is based on Ubuntu 20.04.   Major product releases generally include new features and maintenance updates and are supported on multiple underlying Linux platforms. For example, QuantaStor v6 is available as an upgrade on Ubuntu 18.04 and Ubuntu 20.04 based systems as well as RHEL and RHEL derivative platforms. Platform upgrades to move systems forward (eg 18.04 to 20.04) are made generally available in the first feature update release, such as QuantaStor 6.1.
* [http://downloads.osnexus.com/osn_quantastor_v3.8.0.5335.md5 osn_quantastor_v3.8.0.5335.md5]
* adds support for specifying block size and stripe leg length for hardware RAID unit creation (Adaptec / LSI MegaRAID)
* adds unit build/initialization status information for Adaptec controllers
* adds hardware controller configuration options to the toolbar
* adds qs-util setzfsarcmin / setzfsarcmax commands for adjusting ZFS ARC global settings.
** to configure your system to use 80% of available RAM for ARC cache use the command 'sudo qs-util setzfsarcmax 80'
** reboot is required for new ARC settings to take effect
* adds alert and task annotations to Librato Metrics integration
* adds auto config adjustment to reserve at least 128M of RAM for the system
* adds improved qs CLI help page
* adds support for network share replication
* fixes for remote-replication / DR
* fixes for manual HA failover support
* fixes Adaptec unit creation for single drive, JBOD type is now Simple Volume in 7xxx series
* fixes pool start issue with ZFS pools where network shares would not auto-enable
* fixes Adaptec 7xxx series device correlation
* fixes web UI issue with duplicate physical disks associated to RAID unit
* fixes 'Impacted' Adaptec unit state to be categorized as ''busy'' rather than ''warning''
* fixes auto-floating of pacemaker owned virtual ports
* fixes NFS/CIFS export discovery issue with ''Scan'' function in Backup Policy create/modify dialogs


== v3.7.4.5265 (November 5th 2013) ==
==== Feature Updates (x.Y.z) ====
* adds support for parallelized Backup Policies which can ingest data from any NFS/CIFS sources to Network Shares
If the second digit in the version number has changed this indicates a feature release such as 6.'''1''' going to 6.'''2'''.  Feature releases add new product features as well as a maintenance updates.  No additional licensing is required to access any new features that added but note that QuantaStor licenses do not include licenses for 3rd party products and services that may integrate with QuantaStor.
* adds tab completion for qs CLI
* adds [http://www.osnexus.com/qs-screens/single-gallery/18912656 VMware EUI column] and Storage Volume property to web management interface
* adds 'Mark Disk as Good' dialog to simplify disk replacement with MegaRAID controllers
* adds 'qs-util megalsiget' command to assist with LSI support information requests
* fixes backup policy expired job cleanup
* fixes cciss / HP smart array device discovery issue when used with ZFS
* fixes MegaRAID issue for embedded LSI ROC chips which have no serial number
* fixes password dialog error message to say length isn't between 6 and 40 chars
* fixes issues with enclosure layout view and pop-up menu in web management interface
* fixes MegaRAID patrol read warnings to be informational (use 'qs-util megaccsetup' to setup proper cron job for MegaRAID controller scans)
* fixes pool percent provisioned property to exclude the thin-provisioned space of snapshots


== v3.7.2.5126 (October 21st 2013) (REQUIRES REBOOT) ==
==== Maintenance Updates (x.y.Z) ====
** Note that if you upgrade the SCSI target driver package it will stop any
If the third digit of the version number has changed this such as 6.0.'''2''' or 6.0.'''3''' it represents a maintenance update to address one or more support tickets. These updates generally do not contain new features, only fixes to address specific issues. Maintenance releases generally ship every 4 to 8 weeks. All maintenance "aka hot-fix" releases are provided against the current stable release so upgrading to the latest QuantaStor version is generally required to apply them.
** ZFS pools and require an immediate reboot after the install completes. 
** Sorry for the inconvenience with this update.  Note also that you can optionally upgrade
** the core service and manager packages without a reboot then upgrade the iSCSI target
** package later when you have an available maintenance window.
* [http://downloads.osnexus.com/osn_quantastor_v3.7.2.5126.iso osn_quantastor_v3.7.2.5126.iso]
* [http://downloads.osnexus.com/osn_quantastor_v3.7.2.5126.md5 osn_quantastor_v3.7.2.5126.md5]
* adds core service optimizations to further reduce CPU utilization
* adds automatic backup of MegaRAID controller config data
* adds new pwalk utility for parallelized backup
* adds qs-zconvert utility which simplifies importing & converting foreign ZFS pools and ZVOLs into QuantaStor
* adds qs-util helper utility with common maintenance commands for megaraid, networking, etc
* fix for MegaRAID Patrol Read Aborted warnings by running 'sudo qs megaccestup' which will reschedule the LD consistency check so the PR and it run at different times
* fix for BBU and cache discovery logic for HP P800 controller module
* fix to zpoolfence causing issues with automatic ZFS pool startup at boot time
* fix for gluster volume discovery


== v3.7.0.5061 (October 5th, 2013) ==
==== Build Number (x.y.z.BBB) ====
* [http://downloads.osnexus.com/osn_quantastor_v3.7.0.5061.iso osn_quantastor_v3.7.0.5061.iso]
The build number and corresponding build reference hash can be largely ignored. The build number simply increments with each commit that is made to the source tree. The hash is provided to make it easier for OSNEXUS support and engineering to quickly confirm difference between your current running release and any more modern release.
* [http://downloads.osnexus.com/osn_quantastor_v3.7.0.5061.md5 osn_quantastor_v3.7.0.5061.md5]
* adds CIFS/NFS support for scale-out NAS (Gluster)
* adds 'qs-showlog -e' option which just shows any errors or warnings in the log
* adds additional network configuration information into 'qs-sendlogs'
* adds preferred network port option for grid communication
* adds usage info and ZFS iostat, ZIL and ARC stats to 'qs-iostat'
* adds support for Gluster 3.4
* adds ability to choose RAID group leg size in pool create
* adds support for RAIDZ10, RAIDZ20
* adds qs-crm script to assist with HA triage tasks
* adds hadoop-install script to support latest CloudEra Hadoop
* adds HA module support configurable via /etc/qs_ha_modules.conf
* adds support to control which target drivers are loaded via /etc/iscsi-target.modules
* adds corosync and pacemaker packages for HA support and automatic grid IP failover
* adds fix for bad 'Missing Physical Disk' error
* adds CIFS User Access tab to the web management interface in the Network Shares section
* adds alpha-level support for HA failover using HBAs
* adds SAS HBA discovery module
* adds mcelog package
* fix to LSI MegaRAID hardware event discovery
* fix to pool discovery logic for failed pool devices
* fix so you can set IP to 0.0.0.0 even if this is also set on another port
* fix for ZFS storage pool import to prefer the resilient /dev/disk/by-id rather than /dev/disk/by-path
* fix to allow enabling network shares when no NFS access is present (only CIFS)
* fix for hardware unit to hardware disk association
* fix to pool rescan logic to prevent auto-import unless the UUID of the pool is specified in /etc/qs_zpool_autoimport
* fix remove cache for mirrored ZIL
* fix to AD Domain Join logic to verify hostname is less than or equal to 15 characters in length for netbios compatibility
* fix for zfs pool manager to make discovery cycle to fast-detect status and configuration changes
* fix to service startup message to be clearer
* fix for volume resize so that the iSCSI session is not dropped
* optimization, changes default swappiness to 10 for better performance and turns off unused services like postfix


== v3.6.5.4878 (August 20th, 2013) ==
== Boot Install Image and other downloads ==
* [http://downloads.osnexus.com/osn_quantastor_v3.6.5.4878.iso osn_quantastor_v3.6.5.4878.iso]
=== ISO/DVD/USB Boot Install Image ===
* [http://downloads.osnexus.com/osn_quantastor_v3.6.5.4878.md5 osn_quantastor_v3.6.5.4878.md5]
* fix for ZFS storage volume resize
* fix for ZFS log device detection
* fix for User Create dialog to require Password + Repeat Password to ensure correctly entered passwords
* added support for /etc/exports.custom so that custom NFS mounts could be specified and not overwritten by core service
* added custom script call-outs for pool start/stop. Place scripts in these locations to do custom actions at pool start/stop
** /var/opt/osnexus/custom/pool-poststart.sh
** /var/opt/osnexus/custom/pool-prestop.sh
* added custom script call-out for post system startup. This is called once per system boot.
** /var/opt/osnexus/custom/system-poststart.sh


== v3.6.4.4852 (August 8th, 2013) ==
* The latest version of QuantaStor can be found on our [https://downloads.osnexus.com downloads page here].
* [http://downloads.osnexus.com/osn_quantastor_v3.6.4.4852.iso osn_quantastor_v3.6.4.4852.iso]
* [http://downloads.osnexus.com/osn_quantastor_v3.6.4.4852.md5 osn_quantastor_v3.6.4.4852.md5]
* fix to role creation
* fix to session synchronization in grid environments
* added support for disabling iSCSI redirection via stanza in /etc/quantastor.conf
** [target_manager]  
** disable_iscsi_redirect=true
* fix to allow many-to-many relationship between hardware disks and units
* fix for volume snapshot to skip freespace check as ZFS snapshots are thin-provisioned
* added color highlighting to hot-spares in Enclosure View
* disabled SAS switch manager tab
* enhanced pool delete to require a force option when iSCSI sessions are present
* adds default /etc/apt/preferences.default configuration which allows for non-mainline packages from ubuntu
* adds support for monitoring ZFS pool scrub
* adds dialogs to web interface to start/stop scrub
* adds zpoolscrub command which can be used to setup an automatic monthly scrub on the last Saturday of the month 'sudo zpoolscrub --cron'
* adds cli support for creating custom RBAC roles using wildcards, for example:
** qs role-add "Volume Administrator" --permissions=*:view,StorageVolume:*,NetworkShare:*


== v3.6.3.4811 (August 1st, 2013) ==
* [[QuantaStor Installation via USB Thumb Drive|Bootable Flash Drive instructions.]]
* [http://downloads.osnexus.com/osn_quantastor_v3.6.3.4811.iso osn_quantastor_v3.6.3.4811.iso]
* [http://downloads.osnexus.com/osn_quantastor_v3.6.3.4811.md5 osn_quantastor_v3.6.3.4811.md5]
* adds support for volume replica rollback for easy DR failback
* adds detection for when a replica checkpoint volume is in use (has iSCSI session) and auto marks it as an 'Active Replica Checkpoint'
** this flag can be toggled using the 'Modify Storage Volume' dialog
** when set all replica operations to the active checkpoint are blocked to protect the data
* adds enclosure view which allows you to view the layout of disks within the chassis and their state.  This greatly simplifies drive replacement.
** custom enclosure/chassis drive layouts can be defined in /etc/qs_enclosure_layout.conf
* adds support for developing custom cloud providers for QuantaStor's cloud backup system which can backup to OpenStack SWIFT based object storage
** custom providers are registered using the /etc/qs_cloud_providers.conf file
* adds zfscleanupsnaps helper/maintenance script to cleanup orphaned snapshots which have no associated clone
* adds button to Upgrade Manager dialog to link to this ChangeLog page


== v3.6.2.4780 (July 25th, 2013) ==
NOTE: Archived older versions of QuantaStor ISO install media and CLI tools can be found [https://downloads.osnexus.com.s3.us-east-1.amazonaws.com/list.html here].
* [http://downloads.osnexus.com/osn_quantastor_v3.6.2.4780.iso osn_quantastor_v3.6.2.4780.iso]
* [http://downloads.osnexus.com/osn_quantastor_v3.6.2.4780.md5 osn_quantastor_v3.6.2.4780.md5]
* fixed sorting by slot number
* fixed sorting by disk name
* fixed Create Unit to show the number of selected disks
* fixed Delete Unit so you can delete units with the boot flag (requires checking the 'Force' option) and added a confirmation check
* fixed table views to show alternate/custom name for controller
* fixed unit table to show 'Disks' which is the count of disks in that unit
* fixed issue with alert send using wrong sender name
* fixed replication schedules to allow replicating from zfs volumes with active iSCSI sessions
* adds dialog for multi-delete of network shares
* fixes RAIDz detection
* fixed corner case in pool creation dialog where the filesystem choices needed to update to include ZFS
* fixed snapshot schedule triggering logic to support schedules with a mix of volumes from different systems


== v3.6.1.4765 (June 26th, 2013) ==
= Recent Change Logs =
* [http://downloads.osnexus.com/osn_quantastor_v3.6.1.4765.iso osn_quantastor_v3.6.1.4765.iso]
* [http://downloads.osnexus.com/osn_quantastor_v3.6.1.4765.md5 osn_quantastor_v3.6.1.4765.md5]
* fixes for multi-node ZFS remote-replication & replication schedules
* added initial support for enclosure layout selection
* fix to minor corner cases in grid synchronization logic
* fix to dns update logic
* adds support for enabling the write-back cache at the SCSI target driver level
* adds ALB and TLB bonding modes
* adds storage pool blacklist (/etc/qs_poolblacklist.conf) to exclude storage which should not be managed as a Quantastor pool
* fix for compression enable/disable on ZFS based pools
* fix to an alert that would spam in the web UI in some cases
* fix to zfs share rename
* fix to Adaptec 7xxx module for disk size discovery
* changed ZVOL block size policy to be adjustable via /etc/quantastor.conf
* adds check for volume snapshots to report a nice error if snapshots exist and the parent volume delete is requested


== v3.6.0.4689 (June 26th, 2013) ==
== New Security Notices ==
* [http://downloads.osnexus.com/osn_quantastor_v3.6.0.4689.iso osn_quantastor_v3.6.0.4689.iso]
No security notices published since the latest release, v7.0.1.147 (November 17, 2026), affect QuantaStor. ''Last checked November 17, 2026.''
* [http://downloads.osnexus.com/osn_quantastor_v3.6.0.4689.md5 osn_quantastor_v3.6.0.4689.md5]
* adds support for ZFS storage pools
** compression
** snapshots
** smart replication
** SSD write cache device management (ZIL)
** SSD read cache device management (L2ARC)
** online grow pool with zero downtime
** smart cloning
** data and metadata-checksums
** cloning volumes and share to/from other storage pool types
** enhanced snapshot schedules
* added qs-iostat CLI command for monitoring performance
* added support for sharing with Avid MediaComposer using MediaHarmony samba module
** added avidlog and avidupdate commands for Media Harmony log viewing and auto-update of Avid bins when changes are made
* added support for Network Share cloning
* added grid column for showing % Provisioned on storage pools
* added SMART health PASS/FAIL reporting for MegaRAID disk devices
* fix for Adaptec discovery logic
* added Trigger Snapshot Schedule dialog for immediate activation of policy
* fix to set default rwx for samba shares
* fix to allow single node Gluster volume creation
* added optional lftp based replication
* fix for btrfs pool grow
* changed btrfs to 'Experimental' in web interface
* enhanced clone and restore operations to be sparse aware to recover unused space
* adds support for DRBD proxy
* fix for Chelsio 10GbE support
* fixed MegaRAID mark hot-spare to first mark disk as Good.


== v3.5.9.4504 (May 6th, 2013) ==
== v7.0.1.147  (November 17th 2026) ==
* [http://downloads.osnexus.com/osn_quantastor_v3.5.9.4504.iso osn_quantastor_v3.5.9.4504.iso]
* [http://downloads.osnexus.com/osn_quantastor_v3.5.9.4504.md5 osn_quantastor_v3.5.9.4504.md5]
* fix - setting default drbd replication verify protocol to crc32c
* fix - added logic to ensure volume change operations are not attempted / blocked on offline pools
* fix - block internal database auto-backup to pool if it is in the process of being deleted
* fix - minor web UI spacing fixes
* fix - create storage system link between grid nodes doesn't require specifying password if you're logged in as admin
* fix - adjusted host group add/remove host logic to resolve a corner case where storage volume access control wasn't properly updated
* fix - web UI was showing ZFS and HA support when these features are in beta, these are removed
* fix - fixed apt-get upgrade so that you can run it safely without it stomping on the QuantaStor kernel
* fix - re-added new Adaptec 7xxx CLI
* fix - fix to DRBD reconnect/demote logic
* fix - fixed disable snapshot schedule so that they're not triggered when disabled
* fix - added logic to drop sessions on volume resize so that the initiator will relogin and discover the new volume size
* fix - added option to change the default replication account from qadmin to something else
* fix - added logic to ensure grid doesn't use the loopback interface / 127.x.x.x for peer communication
* fix - added script to change the device timeout settings for Adaptec RAID controller compatibility
* fix - adds support for external host name for grid communication for systems with separate internal/external hostname/IPs
* fix - fixes blank entries from being created in smb.conf which would cause warnings
* fix - set/change user password doesn't require old password if you're logged-in as admin
* fix - fixes to hard password reset logic 'qs_service --reset-password=XXX', duplicate admin account was being created
* added option to restart Samba and/or NFS and not just NFS in web UI


== v2.10.0.4485 (April 29th, 2013) ==
=== [[QuantaStor 7.0.1 Upgrade Instructions | Upgrade Instructions]] ===
* [http://downloads.osnexus.com/osn_quantastor_v2.10.0.4485.iso osn_quantastor_v2.10.0.4485.iso]
Click [[QuantaStor 7.0.1 Upgrade Instructions | here]] for instructions on [[QuantaStor 7.0.1 Upgrade Instructions | upgrading to QuantaStor v7.0.1]].
* [http://downloads.osnexus.com/osn_quantastor_v2.10.0.4485.md5 osn_quantastor_v2.10.0.4485.md5]
* maintenance upgrade for v2 backports some fixes and enhancements from v3
* adds Storage Pool Replication verify dialog to web interface
** replica verification should be run periodically and does a checksum of all the blocks on the primary pool and verifies the secondary pool is correct
* adds performance enhancement to clone operation (~5x-10x faster) and makes it sparse aware
* fixes issue with grid creation in web UI when the default 'password' is used
* fixes issue with pool demote logic for Storage Pool Replication


== v3.5.6.4390 (April 2st, 2013) ==
=== Release Notes ===
* [http://downloads.osnexus.com/osn_quantastor_v3.5.6.4390.iso osn_quantastor_v3.5.6.4390.iso]
* [http://downloads.osnexus.com/osn_quantastor_v3.5.6.4390.md5 osn_quantastor_v3.5.6.4390.md5]
* boosts clone performance by 10x and maintains sparseness of copy so it's utilization level is same as the source
* fixes ISO installation issue that was causing the installer to hang during the last 'preseed' stage.
* fixes issue with brick space utilization calc
* adds option to set alternate name on the HW enclosure
* fixes PAM configuration security problem
* fixes issue with StorageLink ID generation
* fixes cloned volume free space reporting
* adds install logging to preseed to write data into /var/log/qs_install.log
* adds new script to do a quick service status check qs_status.sh
* adds -f option to qs_showlog.sh for tailing the service log
* fixes issue with gluster brick discovery
* fixes PAM password authentication issue / defines default PAM configuration for common-auth and common-password
* fixes ISO installer/preseed bug
* fixes gluster context and toolbar menu
* fixes dynamic gluster peer attach issue
* fixes gluster re-ID process to auto-restart gluster service after changing the internal peer ID
* adds option to modify hardware enclosure name/description
* adds dialogs for rebalance gluster volume and add-bricks to gluster volume
* adds detail on internal services status
* adds dialog for restarting gluster service
* adds UI support for gluster NFS mode


== v3.5.2.4342 (March 16th, 2013) ==
Alerts and Configuration Analysis
* [http://downloads.osnexus.com/osn_quantastor_v3.5.2.4342.iso osn_quantastor_v3.5.2.4342.iso]
* Fixed: Pacemaker node-down and node-up alerts not reaching QuantaStor on Ubuntu 24.04. [ QSTOR-12546 ]
* [http://downloads.osnexus.com/osn_quantastor_v3.5.2.4342.md5 osn_quantastor_v3.5.2.4342.md5]
* Fixed share quota Warning and Urgent alerts not being raised again when another share entered a free-space band that had already alerted. [ QSTOR-12827 ]
* fixes local CIFS / SMB user password issue, password was not set correctly at time of new user creation
* Fixed: alert-config-set --pause-alerts accepting invalid pause periods and unknown alert types. [ QSTOR-12838 ]
* fixes printcap related logging errors seen in Samba log.smbd, new version disables Samba printer config
* adds automatic btrfs rebalancing and associated rebalancing options to quantastor.conf file
* fixes problem where changing the IP address on a port was requiring disable/enable iSCSI to reenable iSCSI access after changes
* fixes bonding logic and issues and infinite loop bug in the base Ubuntu ifenslave script
* fixes postfix log error messages by adding an empty main.cf config
* adds quantastor User-Agent setting to Librato metric post operations
* fixes ActiveDirectory join domain to auto-rollback and report proper error if the domain join does not succeed
* fixes bug in DNS domain search suffix where it would get duplicated
* fixes bug in DNS configuration where UI would not reflect accurate DNS configuration after removing entries


== v3.5.1.4321 (March 12th, 2013) ==
Ceph Scale-out Block, Object and File
* [http://downloads.osnexus.com/osn_quantastor_v3.5.1.4321.iso osn_quantastor_v3.5.1.4321.iso]
* Fixed S3 gateways that stopped answering requests while their service was still running not being detected or alerted. [ QSTOR-10646 ]
* [http://downloads.osnexus.com/osn_quantastor_v3.5.1.4321.md5 osn_quantastor_v3.5.1.4321.md5]
* Fixed: a failed Ceph cluster create no longer leaves leftovers that block every later create on those nodes. [ QSTOR-12224 ]
* fixes CIFS support regression introduced by new Ubuntu 12.04.2 base
* Fixed: Object Pool Group creation failing when the Ceph cluster already had the default RGW zone group. [ QSTOR-12271 ]
* adds MediaHarmony support to CIFS for multi-client Avid editing
* Fixed: S3 requests by hostname failing with NoSuchBucket on nodes with no DNS search domain. [ QSTOR-12749 ]
* fixes force flag so you can resize while volume is in use.  iSCSI session relogin is required.
* Fixed: cloud storage classes created in the web interface now write tiered objects to the destination bucket you choose. [ QSTOR-12857 ]
* fixes to new AD support
* Added: a Ceph-over-ZFS Optimized tuning profile. [ QSTOR-12869 ]
* Fixed: encrypted Ceph OSDs failing to start after a reboot that followed an OSD encryption key replace. [ QSTOR-12914 ]
* Fixed: the Ubuntu 22.04 to 24.04 platform upgrade on Ceph cluster nodes marking OSDs out while the node was upgraded. [ QSTOR-12917 ]
* Fixed a new Ceph RBD volume sometimes being mapped twice on the node that created it, which made deleting the volume fail with 'image has watchers'. [ QSTOR-12990 ]
* Fixed a force-deleted Ceph pool leaving its RBD volumes mapped on every node. [ QSTOR-12991 ]
* Fixed: the HAProxy load balancer not working on Ceph cluster members without a local RADOS gateway. [ QSTOR-13066 ]
* Fixed: encrypted Ceph OSDs failing authentication after a restart following a cephx key conversion. [ QSTOR-13126 ]
* Fixed: S3 auto-tiering for tenant buckets stopping after a coordinated Ceph upgrade from Reef to 20.2.x. [ QSTOR-13141 ]
* New Ceph clusters no longer enable discard on every OSD, and existing clusters have it turned off without restarting OSDs. [ QSTOR-13172 ]
* Delete Storage Class now opens on the right-clicked storage class, and STANDARD no longer offers Delete. [ QSTOR-13221 ]


== v3.5.0.4306 (March 4st, 2013) ==
Dashboards and Analytics
* [http://downloads.osnexus.com/osn_quantastor_v3.5.0.4306.iso osn_quantastor_v3.5.0.4306.iso]
* Fixed: performance dashboards showing no data or wrong values for NFS and SMB shares and Ceph pools, OSDs, MDS and RGW. [ QSTOR-13128 ]
* [http://downloads.osnexus.com/osn_quantastor_v3.5.0.4306.md5 osn_quantastor_v3.5.0.4306.md5]
* Fixed: install-ceph-prometheus now runs on QuantaStor 7.0 (Ubuntu 24.04) and installs current Prometheus releases. [ QSTOR-13315 ]
* adds support for Adaptec 7000 Series RAID controllers
* enhanced CIFS support with ActiveDirectory integration
* adds qs_sendlogs and qs_upgrade scripts for CLI upgrades and log reports
* adds new IO profiles for media production
* adds support for custom tags/names for hardware RAID units, disks, and controllers
* fix to report error when trying to grow software RAID10/RAID1 which isn't supported by mdadm layer
* adds new option to silence alarms on all controllers
* various fixes for grid management plus updated menu in web manager for grid management
* enhanced license activation logic to verify DNS and gateway configuration settings
* fix password check on add grid node
* added force flag option to Resize Volume dialog
* added logic to auto-disable the HDDs write cache when you create a MegaRAID unit
* added support for custom alert handlers
* adds ethtool, ipmitool, and winbind to standard install
* fix for disk identification of KVM/proxmox virtual disk devices
* adds ATA over Ethernet driver
* adds latest Adaptec 7000 driver
* adds STEC PCIe support and latest driver
* added logic to block Gluster volume creation on pools with DR async replication links
* adds support for Windows shadowcopy / snapshot support with CIFS shares
* upgrades Linux kernel to v3.8
* upgrades SCST drivers to latest v3 release


== v3.2.0.4221 (January 12th, 2013) ==
Enclosures and Controllers
* [http://downloads.osnexus.com/osn_quantastor_v3.2.0.4221.iso osn_quantastor_v3.2.0.4221.iso]
* Fixed: a long-running disk identify blocking the request to turn the light off, and ignoring cancel. [ QSTOR-12785 ]
* [http://downloads.osnexus.com/osn_quantastor_v3.2.0.4221.md5 osn_quantastor_v3.2.0.4221.md5]
* Fixed: disk identify failing to blink drives on some enclosures. [ QSTOR-12844 ]
* adds CIFS support
* Fixed: a failed disk identify blink now reports an error instead of Completed. [ QSTOR-12845 ]
* fix to network share rename cleanup
* Added: an option to create Corvault disk groups and pools interleaved. [ QSTOR-12955 ]
* fix to tomcat restart logic
* Fixed: enclosure auto-detection never selecting the Supermicro SC946 60-bay JBOD layouts. [ QSTOR-12966 ]
* various fixes to pool remote-replication failover
* Fixed: External System Profile Apply ignoring the Assign to Hosts setting. [ QSTOR-13068 ]
* fix to bonded port create, now does a down up down beforehand
* Fixed: NVMe drives in the Supermicro ASG-2115S-NE332R getting no drive slot, so Identify could not light their bays. [ QSTOR-13103 ]
* improved grid sync performance


== v2.9.2.4195 (January 5th, 2013) ==
High Availability Failover
* [http://downloads.osnexus.com/osn_quantastor_v2.9.2.4190.iso osn_quantastor_v2.9.2.4195.iso]
* Fixed a node placed in manual standby returning to Active when another cluster node's name starts with the same name. [ QSTOR-11917 ]
* [http://downloads.osnexus.com/osn_quantastor_v2.9.2.4190.md5 osn_quantastor_v2.9.2.4195.md5]
* Creating a site virtual interface right after creating its site cluster now succeeds, and a failed create no longer leaves the address active. [ QSTOR-12473 ]
* fixes Upgrade Manager, to upgrade from previous releases you must upgrade from the command line with these commands:
* Unmanaged virtual interface messages and refused manual failovers now say when the site cluster is in maintenance mode. [ QSTOR-12475 ]
** sudo apt-get update
* Fixed a storage pool that had stopped writing to disk being reported healthy with no alert. [ QSTOR-12667 ]
** sudo apt-get install qstormanager qstorservice
* Fixed: when a pool export overran the HA group's Export Timeout, failover imported the pool without first fencing the exporting node. [ QSTOR-12671 ]
* various fixes to pool remote-replication failover
* Fixed: a storage pool import reporting Completed when the pool could not be imported. [ QSTOR-12674 ]
* enhanced grid synchronization performance
* Fixed: a service restart or one HA pool's failover moving another HA pool off its healthy node. [ QSTOR-12763 ]
* adds support for Nytro MegaRAID
* Fixed: stopping HA cluster services on a node giving up after 15 seconds and leaving the services in an inconsistent state. [ QSTOR-12834 ]
* minor enhancements to qs CLI
* Fixed package updates on Ubuntu 24.04 restarting HA cluster services, which could cause an unplanned HA pool failover. [ QSTOR-12913 ]
* fix to cloud container creation
* Fixed site-vif-delete --convert-to-vif briefly dropping the IP address and raising HA group maintenance mode alerts. [ QSTOR-12931 ]
* fix to license check corner case
* HA nodes no longer report a failed lock manager service at every boot. [ QSTOR-13021 ]
* Fixed: adding a second cluster ring to an HA pair with clustered persistent reservations no longer hangs the peer node. [ QSTOR-13115 ]
* Fixed restarting Pacemaker on an HA node with clustered SCSI3-PR reservations taking minutes and leaving the cluster lock service failed. [ QSTOR-13175 ]
* Fixed: corosync and pacemaker restarting within a minute of an administrator's 'pcs cluster stop'. [ QSTOR-13227 ]


== v3.0.9.4067 (December 2nd, 2012) Official v3 Release ==
NAS Gateway / Cloud Containers
* [http://downloads.osnexus.com/osn_quantastor_v3.0.9.4067.iso osn_quantastor_v3.0.9.4067.iso]
* Fixed: importing a cloud container onto an already-mounted export path leaving it without an NFS export or SMB share. [ QSTOR-12919 ]
* [http://downloads.osnexus.com/osn_quantastor_v3.0.9.4067.md5 osn_quantastor_v3.0.9.4067.md5]
* adds Gluster support
* fixes licensing check issue in grid configurations
* fixes alert propagation issue in grid configurations
* qs cli improvements
** adds help search with partial command names like so 'qs help=glu'
** adds support for loading login credentials eg: 'localhost,admin,password' into ~/.qs.cnf


== v3.0.8.4032 (November 24th, 2012) v3 Release Candidate ==
Network Interfaces
* [http://downloads.osnexus.com/osn_quantastor_v3.0.8.4032.iso osn_quantastor_v3.0.8.4032.iso]
* Fixed: network ports no longer get renamed (eno1 to eno1np0) by kernel and distribution upgrades, which dropped IP, bond and HA VIF settings. [ QSTOR-11072 ]
* [http://downloads.osnexus.com/osn_quantastor_v3.0.8.4032.md5 osn_quantastor_v3.0.8.4032.md5]
* Creating a bonded network interface no longer leaves a second, conflicting definition for the same bond in the network configuration. [ QSTOR-12097 ]
* fixed 4TB limit on pool remote-replication, now there is no limit.
* Fixed: an empty DNS search suffix breaking the host name and AD join, which now checks DNS identity and domain controller ports. [ QSTOR-13112 ]
* adds VLAN interface support, see 'Create VLAN Interface', 'Delete VLAN Interface' in web manager
* upgraded web interface graphics
* fixed icons for pool replication
* added initial support for Gluster, this will be officially supported in v3.1
* added samba to installation process, this will be officially supported in v3.1


== v2.8.1.4068 (December 2nd, 2012) ==
Network Shares
* [http://downloads.osnexus.com/osn_quantastor_v2.8.1.4068.iso osn_quantastor_v2.8.1.4068.iso]
* Kerberos NFS (sec=krb5) users on AD-joined systems now keep their AD identity instead of nobody. [ QSTOR-8198 ]
* [http://downloads.osnexus.com/osn_quantastor_v2.8.1.4068.md5 osn_quantastor_v2.8.1.4068.md5]
* Network share search is now case-insensitive, also matches share descriptions, and runs on Enter or as you type. [ QSTOR-10789 ]
* fixed 4TB limit on pool remote-replication, now there is no limit.
* Added: AD join can use a pre-created computer account. [ QSTOR-11334 ]
* adds VLAN interface support, see 'Create VLAN Interface', 'Delete VLAN Interface' in web manager
* Fixed a share whose dataset mount hangs being retried every hour, leaking stuck processes and blocking other share operations. [ QSTOR-12664 ]
* adds improved volume/share level remote replication
* Fixed a storage system removed from a network share namespace continuing to advertise the namespace over SMB and NFS until another namespace change. [ QSTOR-12921 ]
** communicates better progress information
* Fixed: Changing a network share from the CLI no longer resets its owner group unless --share-owner-group is given. [ QSTOR-12945 ]
** replication process can now be cancelled at any time
* Fixed share rename leaving a share disabled when an NFS client had a file open, and accepting conflicting names. [ QSTOR-12993 ]
** replication is not interrupted by a upgrade or restart of QuantaStor core service
* Fixed: AD join with a wrong administrator password now says the password is wrong. [ QSTOR-12999 ]
* fixed problem with virtual interface floating
* Fixed copying share settings removing SMB user access from the source share, which could leave it open to all users. [ QSTOR-13176 ]
* fixes licensing check issue in grid configurations
* Fixed: Network share owners and groups can again be set to a numeric UID or GID that has no matching user or group on the system. [ QSTOR-13320 ]
* fixes alert propagation issue in grid configurations


== v3.0.5.3952 (November 2nd, 2012) ==
Quantastor CLI
* [http://downloads.osnexus.com/osn_quantastor_v3.0.5.3952.iso osn_quantastor_v3.0.5.3952.iso]
* Fixed sys-modify silently ignoring --domain-suffix, and DNS server changes resetting a customized host FQDN in /etc/hosts. [ QSTOR-12116 ]
* [http://downloads.osnexus.com/osn_quantastor_v3.0.5.3952.md5 osn_quantastor_v3.0.5.3952.md5]
* Fixed: CLI options given as --option=false acting as if they were set to true. [ QSTOR-12782 ]
* fix to automatically update IP addresses in DRBD resource files on source and target side
* Fixed: qs rg-create failing when --scope-type is left at its default. [ QSTOR-12916 ]
* fix to volume naming on DRBD secondary
* Fixed: qs rg-res-add rejecting Object Tenants. [ QSTOR-12918 ]
* fix to upgrade process messages
* fix for DNS issue, resolvconf needed to be restarted after config changes
* fix to DRBD based pool resync logic
* fix to storage pool start ( no longer needs --update-summaries in array startup )
* adds support to allow cancelling Storage Volume clone operations / tasks while in progress
* adds HP SmartArray management support
* removed old btrfs warnings from web interface
* changed btrfs default block size to 32K and made it customizable via /etc/quantastor.conf


== v2.7.4.3942 (October 29nd, 2012) ==
Remote Replication, Snapshots and Backup Policies
* [http://downloads.osnexus.com/osn_quantastor_v2.7.4.3942.iso osn_quantastor_v2.7.4.3942.iso]
* Replication schedules that reference a removed storage system link now switch to the current link instead of failing every run. [ QSTOR-11735 ]
* [http://downloads.osnexus.com/osn_quantastor_v2.7.4.3942.md5 osn_quantastor_v2.7.4.3942.md5]
* Fixed: a replication schedule rollback issued right after a replication run reporting Completed without restoring anything. [ QSTOR-12880 ]
* fix to DRBD based pool startup logic
* Fixed backup policies losing their destination sub-folder on modify and jobs not reporting failures or cancels correctly. [ QSTOR-12886 ]
* fix to DRBD based pool resync logic
* adds support to allow cancelling Storage Volume clone operations / tasks while in progress


== v3.0.2.3926 RC1 (October 22nd, 2012) ==
SCSI / NVMe Target
* [http://downloads.osnexus.com/osn_quantastor_v3.0.2.3926.iso osn_quantastor_v3.0.2.3926.iso]
* Added: Fibre Channel ports now report their negotiated and supported speeds. [ QSTOR-12855 ]
* [http://downloads.osnexus.com/osn_quantastor_v3.0.2.3926.md5 osn_quantastor_v3.0.2.3926.md5]
* Fixed: a Portal Group with no portals exposing its iSCSI volumes on every portal. [ QSTOR-12996 ]
* based on Ubuntu 12.04.1
* Added: an alert listing the iSCSI sessions closed when a Portal Group change removes a portal. [ QSTOR-13018 ]
* incorporates all enhancements made up through QuantaStor v2.7.2
* Fixed NVMe/TCP volumes created on a running pool not being offered to hosts until the pool restarted or failed over. [ QSTOR-13153 ]
* fixes bug in virtual interface (vif) float logic so that when you explicitly disable a vif it won't try to float it.
* fixes NIC bonding issues found in v3.0.0 Tech Preview
* fixes minor bug in Chrome browser support
* fix to apply DNS changes to resolvconf base file
* fixes bonded port speed to show the sum of the speed of slave ports
* upgrades kernel to v3.5.5
* upgrades SCST driver support to v3.0.0
* upgraded to expand browser support for latest browsers (Chrome, FireFox, Opera, IE, etc)
* adds support for German locale, just add /?locale=de to the URL when you connect to the QuantaStor Manager web management interface


== v2.7.2.3912 (October 22nd, 2012) ==
SNMP
* [http://downloads.osnexus.com/osn_quantastor_v2.7.2.3912.iso osn_quantastor_v2.7.2.3912.iso]
* Fixed: the SNMP agent not reporting new objects in a table that was empty when the agent started. [ QSTOR-12905 ]
* [http://downloads.osnexus.com/osn_quantastor_v2.7.2.3912.md5 osn_quantastor_v2.7.2.3912.md5]
* fixes issue with preseed that was causing boot issues after installation
* adds array and hot-spare management support for HP SmartArray RAID controllers


== v2.7.0.3834 (October 2nd, 2012) ==
Security
* [http://downloads.osnexus.com/osn_quantastor_v2.7.0.3834.iso osn_quantastor_v2.7.0.3834.iso]
* Assigning Okta MFA to a user with no email is refused with a clear error. [ QSTOR-12885 ]
* [http://downloads.osnexus.com/osn_quantastor_v2.7.0.3834.md5 osn_quantastor_v2.7.0.3834.md5]
* Fixed: multi-admin approval requests not expiring on the node that created them. [ QSTOR-12981 ]
* adds support for pool level remote replication
* Updated the gSOAP library to 2.8.146, the Genivia critical security release. [ QSTOR-13088 ]
* adds support for Citrix StorageLink with XenServer 6.0 & 6.1
* Added: an optional mitigation for CVE-2026-98432 (qs-util ipoptfilter enable). [ QSTOR-13148 ]
* adds qstorutil.py to simplify StorageLink management operations
* adds REST API support on port 8153
* changed default boot filesystem type to ext3 so that QuantaStor can be para-virtualized under XenServer
* fix for MegaRAID discovery logic (was creating zombie processes)
* fix to storage system ID field on Alert
* fix to rare database lock issue
* expanded CLI command support
* various fixes to CLI commands
* added preferred LUN number logic for multi-protocol VMware configurations
* fix to tomcat initd script


== v2.6.1.3604 (July 23th, 2012) ==
Server Integration
* [http://downloads.osnexus.com/osn_quantastor_v2.6.1.3604.iso osn_quantastor_v2.6.1.3604.iso]
* Added: a QuantaStor storage plugin for Proxmox VE with snapshots, clones, migration, backups and multipath on iSCSI volumes. [ QSTOR-10624 ]
* [http://downloads.osnexus.com/osn_quantastor_v2.6.1.3604.md5 osn_quantastor_v2.6.1.3604.md5]
* Changed: the Proxmox VE plugin is now a native storage type installed from a .deb package and survives Proxmox upgrades. [ QSTOR-11575 ]
* fixes to init.d scripts for tomcat and core service ensures proper restart/stop operations
* Added LXC container support to the QuantaStor Proxmox VE plugin: container root disks can be placed on QuantaStor iSCSI block volumes. [ QSTOR-11968 ]
* adds patch to Cloud Container support for SoftLayer private cloud access within Softlayer private network
* Documented the guest I/O pause during a QuantaStor HA pool failover (about 30-45 seconds, no errors) and the iSCSI timeout guidance. [ QSTOR-12311 ]
* adds y-axis labels to Librato metrics posts
* Documented that storage entries from the Proxmox plugin pre-release stop working on 1.0.0 and later. [ QSTOR-12487 ]
* fix to BBU status
* Added API token authentication: a QuantaStor application token can be used in place of a password. [ QSTOR-12489 ]
* adds LSI CacheVault support
* Fixed: Proxmox snapshot deletes failing with err=493 and leaving the guest locked. [ QSTOR-12537 ]
* adds Brocade 1020 CNA network card detection
* Released Proxmox VE plugin 1.0.1. [ QSTOR-13004 ]
* Added: iSCSI multipath support in the Proxmox VE plugin. [ QSTOR-13005 ]
* Fixed: Proxmox container backups in snapshot mode failing on QuantaStor storage. [ QSTOR-13046 ]
* Added: full clones of a Proxmox VM from a snapshot, and fixed disk creation failing with "already exists". [ QSTOR-13047 ]


== v2.6.0.3579 (July 6th, 2012) ==
Service Core
* [http://downloads.osnexus.com/osn_quantastor_v2.6.0.3579.iso osn_quantastor_v2.6.0.3579.iso]
* Fixed: Send Support Logs reporting Completed when a slow collection or upload never delivered the bundle. [ QSTOR-12703 ]
* adds support for Softlayer Cloud Storage support
* Fixed support bundles leaving out configuration changes made shortly before log collection. [ QSTOR-12705 ]
* adds support for metrics posting to Librato Metrics
* Added the Recovery Manager: generate, download, upload and restore storage system configuration bundles from the web UI and CLI. [ QSTOR-13010 ]
* adds support for PagerDuty.com
* Fixed the NFS/SMB statistics collector logging sudo entries to the system log every 5 seconds. [ QSTOR-13011 ]
* adds support for MegaRAID RAID10 units >16 disks
* adds support for cloning volumes while in use w/ force flag
* various fixes to grid scale-out management support
* upgrade from Tomcat 6 to Tomcat 7 for web management interface web server
* adds check to block volume resize when storage is assigned to XenServer hosts
* fix to UI for replicate network share


== v3.0.0.3422 Tech Preview (May 6th, 2012) ==
Storage Pool Management
* [http://downloads.osnexus.com/osn_quantastor_v3.0.0.3422.iso osn_quantastor_v3.0.0.3422.iso] Technology Preview
* A storage pool is no longer marked offline when a disk-space query fails or times out while the pool is still imported and serving data. [ QSTOR-12804 ]
* This version is based on the same code base as v2.5.0.3422 but is built on top of Ubuntu Server 12.04 LTS and the SCST v3.0 driver.
* Fixed: a serving storage pool being marked unmounted after a failed size check. [ QSTOR-13149 ]


== v2.5.0.3422 (March 28nd, 2012) ==
Universal Containers
* [http://downloads.osnexus.com/osn_quantastor_v2.5.0.3422.iso osn_quantastor_v2.5.0.3422.iso]
* A universal container service whose port is already in use now fails to start with a clear error, instead of repeatedly restarting Docker. [ QSTOR-12329 ]
* [http://downloads.osnexus.com/osn_quantastor_v2.5.0.3422-cloudedition.iso osn_quantastor_v2.5.0.3422-cloudedition.iso]
* Fixed: a Service Container port conflict restarting Docker on the node. [ QSTOR-12898 ]
* adds support for scale-out management
* adds support for HA failover groups utilizing integrated LSI SAS 6160 switch management for storage motion
* adds support for NFS shares backed by a cloud container / infinite S3 storage network shares
* adds support for Infiniband / Mellanox controllers
* adds support for LSI CacheCade SSD cache management
* adds support for Adaptec MaxCache and Adaptec 6xxx series RAID controllers
* adds logic to automatically update the system clock via ntp.ubuntu.com twice daily
* adds support for i2o device discovery
* adds support for Adaptec enclosure discovery
* adds SAS switch management module for LSI 616x
* adds close window button to upper-right corner of dialogs
* adds support for toggling the hot spare flag with Adaptec disk devices using the Mark Hot Spare dialog.
* adds integrated online help documentation for most dialogs via [?] button
* adds check for FC/IB controllers and removes tabs if none are present.
* adds Apply button to alert manager dialog
* adds system memory check
* adds 500GB of flexibility to license key check
* adds core services and tomcat server monitoring
* enhancement to temporarily shutdown FC ports on storage pool stop
* fix to exclude spares from unit create/grow dialogs
* fix to iSCSI target driver status detection logic
* fix to 3ware discovery logic to exclude non-existent units reported as INOPERABLE
* fix to tomcat service start/stop logic, adds status
* fixup of various web interface grid layouts/sizing
* upgrades to version 1.9 of s3ql filesystem
* fix to Modify Storage System so that DNS entries are not removed
* fix to hardware event detection logic to prevent events from being re-raised
* fixes network interface management terminology to make it consistent
* fixes bug in 3ware module flush/rescan operations
* fixes default CLI output so that nested objects are not printed (was constantly scrolling off the screen), use --verbose now for that
* adds support for setting the bonding policy
* fixed BBU discovery for 3ware
* fix to pool grow logic
* fixed storage volume assignment logic to remove iSCSI assignment by IP address.  Only IQN is supported.
* fixed vendor/model information on network ports
* fixed ellipsis on context menus to be ...
* fix to send alert email script so that it logs to /var/log/qs_service.log
* fixed up HP ACU CLI install script
* fix to show "Linear" software RAID type in management interface rather than "RAID2"


== v2.1.0.2979 (Nov 28th, 2011) ==
Upgrade Manager and Installer
* [http://downloads.osnexus.com/osn_quantastor_v2.1.0.2979.iso osn_quantastor_v2.1.0.2979.iso] - MD5 checksum - 65c5f9e8d9e439aa47d1c85c481868ca
* Added: SHA-256 and SHA-512 checksum files for each ISO, OVA and OVA zip download, alongside the existing MD5. [ QSTOR-11155 ]
* adds send log report command to web interface
* Changed: the Ubuntu 22.04 to 24.04 platform upgrade now requires QuantaStor 6.8.0 or later. [ QSTOR-12624 ]
* adds support for hardware RAID unit grow operation (LSI MegaRAID & Adaptec)
* The Ceph upgrade now rejects an invalid target Ceph version with a clear error instead of ignoring it. [ QSTOR-12627 ]
* adds the Linear type Storage Pool layout
* Fixed: Ceph upgrades failing or hanging on grids that reach the package repository through an HTTP/HTTPS proxy. [ QSTOR-12670 ]
* adds support for dynamic Storage Pool grow(concatenate) & expand operations for single disk RAID0 and Linear types
* Added: qs-upgrade --cephPackagesOnly upgrades the Ceph packages on a system that is not part of a Ceph cluster. [ QSTOR-12775 ]
* fixes license TB utilization calculation
* Fixed: the coordinated Ceph upgrade on Ubuntu 24.04 restarting every Ceph daemon at once during the package stage. [ QSTOR-12851 ]
* adds support for virtual network interfaces, virtual interfaces allow you to create virtual network ports on different networks
* Fixed: the coordinated Ceph upgrade reporting Completed when the post-upgrade cleanup failed. [ QSTOR-13146 ]
* adds support for virtual network interface floating.  In the event that the physical port that the virtual interface is attached to goes offline, the virtual interface will automatically float to another online/active physical network interface. Virtual interfaces can also be pinned to specific physical network ports.
* Fixed: a coordinated Ceph upgrade refused with "Detected current upgrade in progress" after an earlier command-line upgrade. [ QSTOR-13163 ]
* adds link state and link speed information to target port / network interface information
* Fixed: upgrades not refreshing the sudoers rules used by the NFS/SMB statistics collector and Pacemaker node alerts. [ QSTOR-13164 ]
* added hardware unit busy state to indicate when a relayout/build is active
* added logic to pre-populate create virtual interface / create bonded interface dialog with subnet/network
* fix create/grow unit dialog to filter disk selection based on selected hw controller


== v2.0.13.2872 ==
Web Manager
* [http://downloads.osnexus.com/osn_quantastor_v2.0.13.2872.iso osn_quantastor_v2.0.13.2872.iso] - MD5 checksum - ba6274b936a01c14825190c1c402d9e2
* Long property values such as descriptions now wrap in the web UI property views instead of being cut off. [ QSTOR-9385 ]
* fixes create/modify cloud backup schedule dialog so that you can change the selected cloud container
* Fixed: ribbon bar buttons no longer draw borders in dark mode. [ QSTOR-9562 ]
* fixes add cloud provider credentials so that you can have an amazon secret key that includes symbols like '+'
* Fixed: adding a node to a running site cluster now completes and the node appears in the web UI. [ QSTOR-12005 ]
* adds CLI command for upgrade 'qs upgrade' so that you can remotely upgrade quantastor instances
* Fixed: Modify Grid Time Zone Settings preselecting Europe/Andorra on UTC grids, and Etc/UTC can now be selected. [ QSTOR-12519 ]
* fixes various localized text for Japanese, note, add /?locale=ja to the URL to see the web interface in Japanese
* Fixed: tree searches now accept the same pool: and comma terms as the grids, and Physical Disks search finds disks. [ QSTOR-12819 ]
* fixes various cloud backup volume object state issues and adds automatic metadata and data cache flushing at the end of each volume backup
* Fixed % Utilized progress bars flashing white while grids refresh in dark mode. [ QSTOR-13222 ]
* fixes cloud container activation logic and upgrades QuantaStor to s3ql v1.0.1
* minor change to the ordering of stack items in the web interface
* adds support for MegaRAID 9265 & 9285 controllers
* adds hardware controller event filtering to remove nonsensical information and limits the event display to the last 50 messages plus any warnings/errors up to 100 hardware event messages total
* adds initial API and model changes for grid management support
* adds battery backup unit status information and detail to the HW controller properties
* adds NFS export path information to the table view for Network Shares
* disables browser caching so that the browser will load a new version of QuantaStor Manager on reconnect rather than using the cached
* optimized RAID50 and RAID60 hardware unit creation
* adds IO profiles to Storage Pool creation
* fix to /etc/init.d/iptables configuration script to allow connections on QuantaStor web and SOAP ports
* fix to Recovery Manager logic to allow recovery of bonded network port configurations
* removed bad tooltips from various web dialogs
* added password reset logic so that you can reset the admin password using qs_service --reset-password=mynewpassword
* added iSCSI redirect logic for grid support
* created qscli debian package and posted on Downloads page
* enhanced the qs_bug_report.sh script to auto upload bug report
* fixed web interface to show volume and pool size in both TB and TiB


== v2.0.9.2752 ==
=== Security Notes ===
* [http://downloads.osnexus.com/osn_quantastor_v2.0.9.2752.iso osn_quantastor_v2.0.9.2752.iso] - MD5 checksum - 0275bf7e21c73bea16b3bf174b7dabed
19 security notices published since v6.9.2.001 (November 2, 2026) affect this release: 13 fixed in this release, 2 fixed by a QuantaStor security update, 3 pending a fix, 1 pending a kernel update (13 externally-facing, 6 internally-facing). See [https://wiki.osnexus.com/security/?release=7.0.1.147 QuantaStor Security Notices for v7.0.1.147].
* adds support for MegaRAID 9265 and 9285 controllers
* improved web interface support for MegaRAID operations (silence alarm, import foreign units)
* adds MegaRAID and 3ware drivers to installer to assist with installing Quantastor onto a hardware RAID1 mirror
* adds hardware controller detection logic to base activation of a plugin based on the hardware driver being loaded and the availability of the hardware vendor's API/CLI
* qs Command Line Utility now supports having a QS_SERVER environment variable so that credentials like --server=localhost,admin,password do not have to be specified for every command
* minor fix to EULA dialog
* minor fix to menu popup so that the minimal menu shows when the "No storage pools detected." message is in the tree.
* fix to network share quota support
* includes upgraded driver - ixgbe v3.4.24 - Adds support for the latest Intel 10GbE NICs
* includes upgraded driver - megaraid_sas v5.30 - Adds support for the 92x5 series
* includes upgraded driver - aacraid v1.1-7[28000] - Adds support for the Adaptec 6xxx series
* adds Japanese localization
* enhanced Storage System Link so that user can specify a remote IP address for replication to remote WAN locations in the cloud


== v2.0.6.2661 ==
== v6.9.2.001  (November 2nd 2026) ==
* [http://downloads.osnexus.com/osn_quantastor_v2.0.6.2661.iso osn_quantastor_v2.0.6.2661.iso] - MD5 checksum - 83c0cbdbca6c21310d606533cd353830
* adds additional license checks to the web interface
* fixes memory leak in the remote replication monitoring logic
* renamed the xfs pool type from 'Archive' to Enterprise'
* changes the default storage pool type to 'Enterprise (XFS)'
* adds additional xfs tuning parameters to address fragmentation
* adds hw controller discovery dialog to preemptively rediscover/rescan controllers


== v2.0.5.2649 ==
=== [[QuantaStor 6.9.2 Upgrade Instructions | Upgrade Instructions]] ===
* [http://downloads.osnexus.com/osn_quantastor_v2.0.5.2649.iso osn_quantastor_v2.0.5.2649.iso] - MD5 checksum - f5acb3df4e8cf170f19f5a2c86cd2c4d
Click [[QuantaStor 6.9.2 Upgrade Instructions | here]] for instructions on [[QuantaStor 6.9.2 Upgrade Instructions | upgrading to QuantaStor v6.9.2]].
* adds OEM Cloud Edition license management support
* adds RAID10/50/60 support for Adaptec controllers
* certification completed for Adaptec 5805 series controllers
* adds async operation support for NFS restart and License management operations
* various enhancements to the CLI to support scripted automation of new system deployment
* adds item "No physical disks detected" to tree in web interface when no disks are detected. Similar items added for volumes, pools, hw controllers.
* fixes licensing issue with Cloud Backup feature
* fixes lsi 3ware installation script
* adds NFS support to Community Edition


== v2.0.4.2602 ==
=== Release Notes ===
* [http://downloads.osnexus.com/osn_quantastor_v2.0.4.2602.iso osn_quantastor_v2.0.4.2602.iso]
* summary: QuantaStor v2.0.4 adds support for IO profiles, remote-replication of network shares and volumes residing in any pool type, and additional Adaptec hardware support.
* adds CLI support for hardware management commands
* adds Japanese localization
* adds support for remote replication of network shares
* adds support for replication of non-btrfs volumes and shares
* adds icons and dialog changes for network share replication
* adds support for adaptec single disk / JBOD type units
* adds use user chap setting as default in UI
* adds support for Storage Pool IO profiles, custom IO profiles can be created in /etc/qs_io_profiles.conf
* adds 'disk-list=ALL' option to storage pool-create command using the qs CLI. This will auto-select all available non-utilized disks.


== v2.0.2.2502 ==
Remote Replication, Snapshots and Backup Policies
* [http://downloads.osnexus.com/osn_quantastor_v2.0.2.2502.iso osn_quantastor_v2.0.2.2502.iso] - MD5 checksum - c32f3fa46eb132db707cb50ecff5c526
* Fixed: snapshot and replication schedules could stop running after upgrading to 6.9.1 on systems with many snapshots. [ QSTOR-13162 ]
* summary: QuantaStor v2.0.2 adds support for Adaptec controllers, cloud licensing and includes some minor maintenance fixes.
* fixes issue with network interface changes to ports with gateway set
* adds icon to identify spare hardware units
* fixes issue where duplicate disks were shown under a hardware unit after it is created
* fixes RAID level correlation / Storage Pool now shows hardware RAID level if hardware RAID is used
* fixed web interface rendering bug seen in Firefox 4.
* added logic to flush the write buffer cache of hardware RAID controllers automatically when storage pools are stopped. (also part of system shutdown)
* fixes pool identification logic to route 'flash led' request to hardware controller as necessary
* adds logic to discover boot/system physical disks but filter them from the web interface. This information is used to identify the hardware RAID unit on which the core QuantaStor OS is installed so that we can prevent users from deleting it.
* improved correlation of physical disks with hardware RAID units
* adds support for OEM edition branding
* adds support for Adaptec 5405 controller
* adds flag to allow network configuration recovery as part of database rollback
* adds support for network share client modify commands to CLI


== v2.0.1.2430 ==  
=== Security Notes ===
* summary: QuantaStor v2.0.1 adds support for NFSv4 and includes some minor maintenance fixes.
No security notices published since v6.9.1.001 (October 28, 2026) affect this release.
* adds support for NFSv4
* adds simplified NFS export path format which eliminates the full storage pool GUID from the path
* adds customizable ARP filtering policy setting to Modify Storage System dialog
* adds NFS configuration dialog so you can set the system to NFSv3 or NFSv4 mode
* fixes ribbon bar browser layout issue with IE
* fixes bug in CLI command system-shutdown
* fixes Windows CLI so you can run it from anywhere rather than just from the CLI installed location
* fixes issue with Add Host dialog where the host entries to a bad DNS lookup and get an invalid IP address associated with them
* fixes for Citrix StorageLink 2.4 support
* fixes upgrade from 1.x to 2.x so that this can be done and the kernel upgrade is automatic
* fixes pool start logic to automatically re-enable network shares when a storage pool is brought back online
* fixes pool modify configuration to preserve the enable write optimizations flag which was getting cleared when a pool was start/stopped


== v2.0.0.2390 ** ==  
== v6.9.1.001  (October 28th 2026) ==
* [http://downloads.osnexus.com/osn_quantastor_v2.0.0.2390.iso osn_quantastor_v2.0.0.2390.iso] - MD5 checksum - 832183d0723e5623390aa3d1c3b2dec0
* summary: QuantaStor v2.0 adds support for Fibre Channel via Qlogic 24xx and 25xx series adapters and adds integrated support for the LSI MegaRAID and DELL PERC families of RAID controllers.
* fixes invalid warning when scsi target driver is restarted
* adds install script for LSI MegaRAID CLI to /opt/osnexus/quantastor/raid-tools/lsimegaraid-install.sh
* adds plug-in support for LSI MegaRAID discovery and management
* adds support for Fibre Channel via Qlogic 24xx and 25xx cards
* add host/initiator dialogs updated to support FC initiators
* new kernel 2.6.35-27 with FC support and latest LSI MegaRAID driver
* multiple simultaneous hardware alerts are now coalesced into a single alert email
* enhanced storage volume create dialog to support partial reservation of space
* added additional RAID info message filtering
* fixes /dev/fd0 warning messages via floppy driver blacklist
* fixes make initrd issue with missing pango library
* fixes missing target ID field in UI which was always reporting 0
* cleanup of alert email to remove non-IP addresses like 'bond0' from the list.
* added logic to remove the replication and cloud backup tabs as per licensing
* SCST scsi target driver optimized for performance
* fixes corner case with IQN target ID generation with 'volname.x' overlapping with 'volname:x'
* fixes UI issue with partially expanded tree on User, Cloud, and Replication tabs
* adds XenServer to drop-down list of supported host types
* adds cloud container repair command to fixup container in cases where the system is shutdown while cloud replication is in progress
* adds network share enable/disable dialogs rather than using the network share modify dialog for this
* adds config file option to permanently enable/disable arp filtering.  Default is auto where arp filtering is enabled only when NIC ports are bonded.
* adds IP Address to host modify dialog so this can be changed when the detected IP address is wrong.
* minor fix to export storage pool command
* minor UI fix to virtual port / bond creation
* minor UI fix to create volume dialog when pool has no free space
* cleanup of storage quota create dialog layout
* target IQN generation now includes part of the storage volume UUID
* fix to cloud container enable / repair logic
* adds logic to automatically removed completed tasks and old alerts > 50 by default
* fixes CHAP authentication bug where remove old entries were not removed on reconfiguration of CHAP settings
* fixes Windows MPIO issue with t10 device descriptor format
* fixes license key activation error detail
* fix to db restore logic
* fix to service upgrade logic
* fix to modify cloud container dialog
* fixed issue with db rollback to a configuration database with ports configured with NIC bonding, new behavior is to flush the bond configuration.
* fixed issue with VMware physical disks being identified as XenServer


== v1.5.1.2277 ==  
=== [[QuantaStor 6.9.1 Upgrade Instructions | Upgrade Instructions]] ===
* osn_quantastor_v1.5.1.2277.iso - MD5 checksum - 8161052696beacf85aab8dfcc61104dc
Click [[QuantaStor 6.9.1 Upgrade Instructions | here]] for instructions on [[QuantaStor 6.9.1 Upgrade Instructions | upgrading to QuantaStor v6.9.1]].
* web interface redesign to move tabs to the top
* adds hardware RAID device correlation from physical disk -> hardware unit -> hardware disk
* we now enable ARP filtering when NIC bonding / virtual ports are used
* adds 3ware support for unit create, unit delete, unit identify, disk mark spare, disk remove, and controller rescan
* fix up of web interface column widths
* adds alert severity to the subject line of emailed alerts


== v1.5.0.2239 ==  
=== Release Notes ===
* osn_quantastor_v1.5.0.2239.iso - MD5 checksum - be4a4b78a2c39b4cb2cfa0ea55c9569e
* summary: 2239 is a hot-fix release for some issues caught after the initial 1.5.0 release.
* fixes bug in session monitoring logic
* fixes bug in alert manager email generation
* fixes alert manager dialog so that the SNMP password is hidden text ******


== v1.5.0.2233 ** ==
Security
* osn_quantastor_v1.5.0.2233.iso - MD5 checksum - 2e5efe438c785046ad27c7ff0c79641b
* Fixed: QuantaStor failed to start in FIPS mode after upgrading to 6.9 when a 3DES-encrypted license manager certificate was present. [ QSTOR-13041 ]
* summary: QuantaStor 1.5 introduces Cloud Backup to Amazon S3 and adds support for SCSI-3PR which is needed for Hyper-V live migration
* Fixed: QuantaStor now distrusts the compromised eMudhra and Comodo AAA root CAs (USN-8944-1); please upgrade with security updates included (Core + Security, or qs-upgrade without --coreOnly) to install the change. [ QSTOR-13070 ]
* fixes installer so that an internet connection is no longer required to install from CD/ISO
* fixes XFS thick provisioning w/large volumes
* fixes Cancel Task dialog to show proper "Are you sure?" text
* fixes Storage Volume Resize dialog max size setting for thick provisioning
* changes iSCSI driver from IET to SCST
* fixes 'View Share' dialog, missing space in mount path
* fixes text validation in dialogs so that the cursor doesn't jump to the end
* fixes upgrade logic to upgrade the target driver first and tomcat last
* fixes VMWare/XenServer virtual appliance device discovery so that devices are found without allow_unident=1 flag
* adds option to create/modify a pool to 'Enable Write Optimizations'.  This uses the nobarrier filesystem option to leverage write optimizations in systems with a battery backup units.
* adds new LSI 3ware operations to web interface: controller rescan, add hot spare, identify disk, identify unit
* adds JFS pool type (create via command line only)
* adds support for SCSI3 persistent reservations / Windows Hyper-V live migration
* adds cloud backup support (Amazon S3)
* adds a warning to BTRFS pool type creation, this pool type is not yet ready for production use


== v1.4.1.2069 ==  
=== Security Notes ===
* osn_quantastor_v1.4.1.2069.iso - MD5 checksum - 39744af315cd3d44498d9ba73a2b4013 
10 security notices published since v6.9.0.464 (October 15, 2026) affect this release: 8 fixed in this release, 1 fixed by a QuantaStor security update, 1 pending a fix (5 externally-facing, 5 internally-facing). See [https://wiki.osnexus.com/security/?release=6.9.1.001 QuantaStor Security Notices for v6.9.1.001].
* adds support for FusionIO cards
* adds support for new XFS based 'Archive' storage pool type. The Standard (ext4) pools are limited to 16TB which is sub-optimal for some disk-to-disk backup applications like Atempo so the new 'Archive (xfs)' pool type w/ a 8EB limit solves that.
* adds automatic audit logging, see /var/log/qs_audit.log
* adds logic to expunge old complete or failed task entries automatically
* adds logic to do an automatic internal database backup anytime a new pool is created
* adds properties page for iSCSI session in web interface
* adds LSI 3ware logical unit discovery
* fixes size reporting on Standard (ext4) thin provisioned volumes
* fixes service update logic
* fixes bug that was preventing new user role creation
* fixes bug in target port modify dialog
* fixes to new SCST support beta
* fixes bug in modify chap user/password where they were reversed


== v1.4.0.2006 ==  
== v6.9.0.464  (October 15th 2026) ==
* osn_quantastor_v1.4.0.2006.iso - MD5 checksum - 7a27091cac27f470d4e83f31e55c361f
* remote replication support officially released
* adds Upgrade Manager for upgrading QuantaStor via the web interface
* adds Recovery Manager for recovering the QuantaStor database via the web interface
* login screen uses default password 'password' if no password is specified
* additional i18n work to prepare for localized editions


== v1.3.1.1966 ==  
=== [[QuantaStor 6.9.0 Upgrade Instructions | Upgrade Instructions]] ===
* osn_quantastor_v1.3.1.1966.iso - MD5 checksum - 3d5fa861634451c9cf14b79e4c61a535
Click [[QuantaStor 6.9.0 Upgrade Instructions | here]] for instructions on [[QuantaStor 6.9.0 Upgrade Instructions | upgrading to QuantaStor v6.9.0]].
* remote-replication beta updates
** improved connection state logic
** various enhancements to enable whole file transfers on initial push as well as options to disable this mode in quantastor.conf
** bandwidth fixes for storage system link dialogs
* fixed CHAP bug in web interface
* added device exclusion list option to /etc/quantastor.conf
* additional i18n work to prepare for localized editions
* fixed bug in PhysicalDisk query where invalid characters in the serialNumber field was causing SOAP API issues


== v1.3.1.1930 ==  
=== Release Notes ===
* osn_quantastor_v1.3.1.1930.iso - MD5 checksum - cded012fb659a3fe85091614bca96bc6
* fixed installer to allow more control over partitioning
* fixed bug in filesystem resize logic
* adds support for HP P400 RAID controllers via hpacucli
* fixed up firmware level detection
* adds beta support for remote replication schedules
* adds beta support for remote replication
* adds dialog for modifying network share client entries
* extends Storage System modify dialog to allow setting the network domain and search suffix
* additional i18n work to prepare for localized editions
* added storage system ID reset when /etc/qs_reset_sysid is present


== v1.3.0.1864* ==
Alerts and Configuration Analysis
* osn_quantastor_v1.3.0.1864.iso - MD5 checksum - 4b96d2a450273f130f98ceb68aec26f4
* Added: a Zabbix alert handler (Zabbix 7.0+) with an importable template of triggers and dashboards. [ QSTOR-10802 ]
* upgraded base platform from Ubuntu Server 10.04 to Ubuntu Server 10.10
* Added: alerts can be paused. [ QSTOR-11665 ]
* adds support for NAS / network shares / NFSv3
* Added: alerts for scale-out share capacity thresholds. [ QSTOR-11911 ]
* adds support for network share snapshots
* Fixed: report schedules did not save to a custom local save location. [ QSTOR-11937 ]
* adds support for restoring from network share snapshot
* Fixed: a removed disk could keep raising a Disk Health Non-optimal alert with a blank device and serial. [ QSTOR-12230 ]
* enhances snapshot schedules to include support for automatic network share snapshots
* Changed: Discord is no longer listed by default in the Alert Manager ITSM integrations; it can be re-enabled in qs_alerthandlers.conf. [ QSTOR-12341 ]
* added additional license checks
* added more detail to storage pool properties page
* added dynamic permission definition upgrade logic
* additional i18n work to prepare for German and Japanese localization
* fixed bug in pool free-space calculation
* fix to target port state, was showing offline in some cases where it was online
* fix to storage pool state, also showing offline in some cases where it was online
* added logic to skip the startup device arrival delay if the system has been up for more than a couple mintues
* enhanced CLI to add network share management commands
* some optimization of web UI synchronization logic
* fixed up the send alert logic to handle SSL SMTP connections w/ retry logic
* added remote replication tab and initial code for replication schedules


== v1.2.0.1737 ==
Ceph Scale-out Block, Object and File
* osn_quantastor_v1.2.0.1737.iso - MD5 checksum - E352F9C576BA1C1EC9A3B13AEF1D4F5C
* Added: replication of scale-out (CephFS) network shares to a second Ceph cluster using CephFS snapshot mirroring. [ QSTOR-9709 ]
* added support for changing DNS entries to the 'Modify Storage System' dialog
* Added: bucket object lifecycle policies for external S3 endpoints. [ QSTOR-11603 ]
* added support for sending email with SMTP user/password
* Fixed: client keyrings for volumes on erasure-coded pools now include the data pool, so direct RBD mapping works. [ QSTOR-11610 ]
* fixed bug in license activate dialog to show license activation state
* Fixed: RADOS gateway logs are now rotated daily and capped at 100 MB so they cannot fill the boot drive. [ QSTOR-11645 ]
* added initial support for remote replication
* Added: per-bucket rate limits on operations and bandwidth for object storage. [ QSTOR-11836 ]
* fixed memory leak in storage pool state and health monitor
* Fixed: deleting a scale-out object pool from Storage Management now points to qs object-pool-group-delete instead of failing with an unclear error. [ QSTOR-11896 ]
* additional work on Japanese localization
* Fixed: retrying a failed Ceph node add no longer stops with "key does not match". [ QSTOR-11907 ]
* added properties pages for hardware enclosure / controller types
* Fixed: qs cckr-assoc-get failed with a database column error. [ QSTOR-11924 ]
* added initial support for LSI 3ware 9690SA hardware discovery / alert integration
* Fixed: deleting a Ceph pool or CephFS share now removes it from client keyrings that referenced it. [ QSTOR-11925 ]
* added support for gathering tx/rx data per network adapter
* Fixed: cloning a Ceph RBD volume or snapshot failed. [ QSTOR-11928 ]
* added file-system optimizations to reduce meta data footprint
* Fixed: a failed Ceph RBD clone can now be retried, and force-deleting a Ceph pool removes its volume records. [ QSTOR-11929 ]
* added support for Fusion IO device names
* Fixed: qs osc-create rejected some recommended storage class names, such as EXPRESS_ONEZONE and OUTPOSTS. [ QSTOR-11943 ]
* Fixed: load-balanced object storage now redirects ports 80 and 443 to the load balancer's ports instead of falling back to a single gateway. [ QSTOR-12073 ]
* Fixed: qs object-user-create --tenant failed with "Unable to locate tenant". [ QSTOR-12123 ]
* Changed: bucket and S3 user discovery now uses the RGW admin API, so large namespaces scan much faster and a failed gateway reply no longer removes buckets or users. [ QSTOR-12133 ]
* Fixed: qs bucket-get now finds tenant-scoped buckets by bare name or tenant/bucket. [ QSTOR-12148 ]
* Changed: Ceph updated to Tentacle 20.2.4 on Ubuntu 22.04 and 24.04. [ QSTOR-12162 ]
* Fixed: a deleted object storage class data pool was recreated by the gateway; deleting the default STANDARD pool is now refused. [ QSTOR-12165 ]
* Added: Ceph over ZFS - zvols in a ZFS storage pool (including dRAID) can be used as Ceph OSD devices. [ QSTOR-12166 ]
* Added: storage classes can be deleted. [ QSTOR-12178 ]
* Fixed: upgrading RGW multisite deployments to Ceph 20.2.4 keeps zones replicating, and secure SigV4 is restored once every zone is upgraded (CVE-2026-54330). [ QSTOR-12269 ]
* Changed: Ceph 20.2.4 clusters keep legacy CephX keys so kernel clients keep working; qs ceph-cluster-key-convert converts daemon keys to aes256k (CVE-2025-30156). [ QSTOR-12270 ]
* Fixed: RGW admin operations now use HTTPS when the gateway runs in HTTPS mode. [ QSTOR-12294 ]
* Changed: Create Ceph Cluster reports progress per stage, and the Create OSDs dialog keeps selections when the search filter changes. [ QSTOR-12323 ]
* Fixed: Ceph OSD creation now takes seconds instead of minutes on large devices. [ QSTOR-12332 ]
* Changed: the default metadata DB size for new Ceph OSDs is sized from the selected devices, up to 3% of raw capacity. [ QSTOR-12461 ]
* Added: cephfs-mirror and rbd-mirror are installed on Ubuntu 22.04 and 24.04 appliances. [ QSTOR-12547 ]
* Fixed: Ceph OSDs on a loopback-alias public address showed Offline, and a missing OSD now raises an alert. [ QSTOR-12734 ]
* Fixed: qs-s3util move-objects now rejects a storage class that does not exist (override with --skip-class-check). [ QSTOR-12755 ]
* Fixed Replace OSD losing encryption and DB/WAL devices; the replacement disk is now cleared automatically and disks in use are refused. [ QSTOR-12894 ]
* Fixed encrypted Ceph OSD key replace failing on grids with journal devices, CLI OSD create dropping DB/WAL devices when no size was given, and failed OSD creates leaving orphaned OSD IDs. [ QSTOR-12901 ]


== v1.1.0.1604 ==
Dashboards and Analytics
* fixed storage pool delete logic when deleting a pool with missing disk devices
* Added: External Dashboards - custom dashboards embedded in the Web Manager and organized into groups. [ QSTOR-9308 ]
* initial support for Japanese locale
* Added: a View Report option to view pool reports in the web interface. [ QSTOR-9707 ]
* added option to QuantaStor Manager UI to allow one to 'force' a storage pool to start even when degraded
* Added: a network share usage tracker and dashboard, filterable by user or group. [ QSTOR-11720 ]
* improved device identification logic
* Added: a Replication view on the Share and Volume dashboards that charts replication transfer rate. [ QSTOR-12289 ]
* fixed minor bug in HP RAID controller support detection logic
* Fixed: dashboard tile actions are now keyboard accessible and their colours meet WCAG AA contrast. [ QSTOR-12491 ]
* added support for large >2TB hardware RAID devices
* Changed: Trends charts draw lines instead of filled areas, legends toggle series again, and the pool chart plots used space against capacity. [ QSTOR-12575 ]
* minor fix to storage pool create logic so that physical disks don't show the storage pool association as a GUID
* Fixed: volume capacity and trend statistics were not recorded when optimized stats collection was enabled. [ QSTOR-12576 ]
== v1.1.0.1592 * ==
* Fixed: Trends and Usage windows of 12 hours or longer showed zero capacity. [ QSTOR-12577 ]
* adds support for configuring ports as 'iSCSI enabled' so that ports can be designated as management only
* Fixed: updated statistics rollup settings were not applied to upgraded systems. [ QSTOR-12578 ]
* fixed physical disk discovery bug in XS VM
* adjusted read/transmit settings in iSCSI target driver to improve performance
* fixed storage pool start-up issue which would cause pools to be started as degraded or not at all.  This was more common with large pools with 6 or more disks.
* fixed various edge conditions around create/delete virtual port
* fixed bug in port state discovery
* fixed bug where network access to QS server was not available after boot because networking needed to be restarted after port bonding was completed. Non-issue with systems not utilizing port bonding.


== v1.1.0.1570 ==
Disk Management
* added Mac OS X option to the host add/modify dialog
* Changed: removed unnecessary SMART query log messages on CORVAULT systems. [ QSTOR-11583 ]
* minor fixes to volume cloning logic to support cloning across pool types
* Added: a [tag:VALUE] disk filter, so tagged disks can be selected by tag, for example in pool-create --disk-list. [ QSTOR-11887 ]
* minor fixes to alert email generation logic
* Added: a Mode option for the disk performance test to run disks serially, in parallel, or grouped by vdev or enclosure. [ QSTOR-11953 ]
* added support for automatic backup of QuantaStor database to /var/opt/osnexus/quantastor/osn.db.backup
* Fixed: healthy SATA drives behind a SAS HBA raised false non-optimal health alerts. [ QSTOR-12082 ]
* added initial changes for HP server / HP RAID controller support
* Fixed: drives behind an HPE Smart Array Gen10 HBA (smartpqi) were not shown on Ubuntu 24.04. [ QSTOR-12726 ]
* updated device ID collection logic to store scsi VDP 0x83 descriptor information for Physical Disk objects
* fixed bug in stripe-width/stride calculations for 'Standard' type pools
* fixed UI bug preventing role creation / RBAC security configuration changes
== v1.1.0.1560 ==
* fix to device discovery logic to support running QuantaStor in a VMWare ESX virtual machine
* fix to storage pool deletion logic to properly clear physical device to storage pool association
* added support for 'Standard' type storage pools which utilizes ext4 rather than btrfs as used with the 'Advanced' storage pool type.
* updated storage volume create dialog to include storage pool RAID level info
* updated QuantaStor kernel to be based off 2.6.35 to resolve ENOSPC edge conditions with Advanced storage pool type
* minor fix to storage pool diagram colors to improve contrast
* improved quantastor shutdown logic to bring down storage pools more cleanly
* updated storage pool partitioning logic to align storage pools to physical disk cylinder boundaries
* added filtering logic to prevent snapshot selection of volumes in Standard type storage pools


== Notes ==
Enclosures and Controllers
Note that version changes that are marked with an asterisk (*) indicate builds that include a change to the iSCSI target driver. A single asterisk is used to indicate a recommended but not required change to the driver and a double asterisk (**) is used to indicate that the qstortarget package must be upgraded along with the regular qstormanager and qstorservice packages.
* Fixed: a Seagate CORVAULT that was not fully populated was given the wrong enclosure layout, or none. [ QSTOR-12088 ]
* Added support for the Dell PowerEdge R740xd 24-bay NVMe server, including its enclosure layout and drive slot mapping in Hardware Enclosures & Controllers. [ QSTOR-12944 ]
 
High Availability Failover
* Validated: Windows Server 2022 Hyper-V failover clusters with Cluster Shared Volumes on QuantaStor Fibre Channel HA pools. [ QSTOR-10677 ]
* Added: clustered SCSI-3 persistent reservations for HA storage pools, so client reservations (Hyper-V, Windows Server Failover Clustering) survive failover. [ QSTOR-10705 ]
* Fixed: service SPNs on an HA VIF's AD computer object now keep working after failover. [ QSTOR-10884 ]
* Fixed: moving a site cluster VIF to a node with no location constraint now fails at once with an explanation instead of after a minute of retries. [ QSTOR-11605 ]
* Fixed: deleting an HA VIF from an active pool could fail the pool over to the standby node. [ QSTOR-11694 ]
* Fixed: Set Grid Sync Master reverted within seconds on grids with a Grid Management VIF. [ QSTOR-11698 ]
* Fixed: the FC link-state failover policy now applies only to pools that export volumes over FC. [ QSTOR-11855 ]
* Fixed: an HA node lost its manual-standby state after a reboot or distribution upgrade. [ QSTOR-11957 ]
* Fixed: deleting an HA pool or HA VIF could trigger a spurious failover on the peer. [ QSTOR-12002 ]
* Fixed: a stale site-cluster association could produce a corosync configuration that stopped corosync from starting. [ QSTOR-12026 ]
* Fixed: a manual-standby setting left over from an earlier configuration could force HA nodes into standby after an upgrade. [ QSTOR-12044 ]
* Fixed: failed resource actions were not detected on Pacemaker 2.1, so automatic HA cleanup did not run. [ QSTOR-12080 ]
* Fixed: HA pool failover failed on RHEL/AlmaLinux/Rocky 8 during SCST device removal (clustered SCSI-3 reservations are not available on el8). [ QSTOR-12182 ]
* Added: HA group creation on WD Data24 checks that IO fencing is enabled. [ QSTOR-12212 ]
* Changed: faster HA failover for pools with many volumes. [ QSTOR-12343 ]
* Fixed: HA failover could be blocked by open files, active NFS clients or a failed export, or disconnect SMB clients of other pools. [ QSTOR-12343 ]
* Fixed: in rare cases both HA nodes could import the same pool, for example after both were powered on at the same time. [ QSTOR-12343 ]
* Fixed: a volume's LUN identity could change during failover, and a suspended pool or a failed pass-through volume could hang or stop the QuantaStor service. [ QSTOR-12343 ]
* Fixed: the HA failover health check failed with a database error when an FC initiator was registered. [ QSTOR-12513 ]
* Added: an HA group option that lets a node holding fenced, suspended pools reboot itself once the peer has taken them over. [ QSTOR-12615 ]
* Changed: enabling clustered SCSI-3 reservations requires every HA group member to run 6.9.0 or newer with its installed SCST driver loaded. [ QSTOR-12630 ]
* Fixed: when several volumes are assigned to a Fibre Channel host one after another, the last one is no longer left out of the pool's ALUA device group. [ QSTOR-12697 ]
* Fixed: FC target ports are enabled only after every exported volume is mapped and its ALUA state set, so clients no longer see empty ports at startup. [ QSTOR-12724 ]
* Changed: faster, more reliable pool import and failover. [ QSTOR-12725 ]
* Fixed: a node taking over several HA pools now imports them in parallel. [ QSTOR-12728 ]
* Fixed: assigning a volume while its HA pool is exporting no longer recreates targets on the exporting node. [ QSTOR-12731 ]
* Fixed: after an HA pool owner reboots, its FC target ports return as soon as standby devices are ready instead of after 10 minutes. [ QSTOR-12765 ]
* Fixed: Windows MPIO failed to claim a QuantaStor FC node's paths after that node rebooted (event 47). [ QSTOR-12766 ]
* Fixed: an HA volume's standby device now reports the same provisioning, UNMAP and geometry as the volume. [ QSTOR-12771 ]
* Fixed: deleting an HA group left the former passive node's standby devices, ALUA groups and FC LUN maps behind. [ QSTOR-12799 ]
* Fixed: failover of an FC ALUA pool without clustered reservations now keeps clients' standby paths. [ QSTOR-12807 ]
* Fixed: an FC ALUA takeover could activate paths before the LUNs moved off the standby devices, risking lost writes. [ QSTOR-12810 ]
* Changed: the HA group dialogs have a new Advanced Settings tab, and the Tertiary System selection is removed. [ QSTOR-12861 ]
* Fixed: rebooting both HA nodes at once could panic a node during shutdown. [ QSTOR-12881 ]
* Fixed FC volume LUN numbers changing after an HA pool import and first failover, which could leave Linux initiators with standby paths to the wrong volume after the previous owner rebooted. [ QSTOR-12883 ]
* Fixed: an HA node could take up to 30 minutes to recover cluster locking, and failover during a planned node reboot could run past iSCSI/FC client timeouts. [ QSTOR-12888 ]
 
Kernel and Drivers
* Changed: Ubuntu 24.04 appliances now run kernel 6.17.0-20 with mpi3mr 8.16.1.0.0 and ixgbe 6.3.4 drivers. [ QSTOR-11647 ]
* Changed: OpenZFS updated to 2.3.9 on Ubuntu 22.04 and 24.04, fixing a write-path livelock that could block pool export. [ QSTOR-12317 ]
 
Licensing
* Added: license keys can be added to multiple grid systems at once. [ QSTOR-11930 ]
* Fixed: online license activation failures now report the underlying cause. [ QSTOR-12034 ]
 
Multitenancy
* Fixed: the Create Resource Group dialog closed when every subnet was already bound; the binding setting moved to the Service Configs tab. [ QSTOR-11186 ]
 
NAS Gateway / Cloud Containers
* Fixed: auto-tiering now works on the DR site after a failover. [ QSTOR-11956 ]
* Changed: removed Seagate Lyve Cloud cloud-provider support, as the service has been discontinued. [ QSTOR-12342 ]
* Fixed: added cloud-container-remove and cloud-provider-remove, cloud bucket deletion now requires --delete-cloud-bucket=true, and credential removal no longer prints the secret key. [ QSTOR-12668 ]
 
Network Interfaces
* Fixed: a leftover cloud-init netplan file could override QuantaStor networking after qs-distupgrade. [ QSTOR-10033 ]
* Changed: multi-homed systems now answer ARP only on the interface that owns the address (arp_ignore=1, arp_announce=2). [ QSTOR-12324 ]
* Added: the Docker bridge and container address pools can be moved off 172.17.0.0/16 in qs_docker.conf. [ QSTOR-12325 ]
* Fixed: a static route duplicating an existing route left networking failed after reboot. [ QSTOR-12711 ]
 
Network Shares
* Added: SFTP access to network shares. [ QSTOR-11295 ]
* Added: NFS and SMB client I/O statistics for network shares, per share and per client. [ QSTOR-11604 ]
* Fixed: NFSv4 mounts hung after nfsdcld failed; it is now detected, alerted on and repaired automatically. [ QSTOR-11828 ]
* Fixed: HA pool failover did not start the NFS server on the acquiring node. [ QSTOR-11873 ]
* Fixed: network shares, share snapshots and clones could be named with leading special characters. [ QSTOR-11916 ]
* Added: the Join AD Domain dialog shows the hostname and FQDN the storage system will register in Active Directory. [ QSTOR-12105 ]
* Fixed: namespace referral lists now refresh when an interface changes or goes offline. [ QSTOR-12217 ]
* Added: a clear message when an AD user has no uidNumber/gidNumber in RFC2307 mode. [ QSTOR-12275 ]
* Changed: the namespace dialogs use a resizable share chooser that keeps selections across searches, and searches accept pool:<name>. [ QSTOR-12290 ]
* Added: share aliases and sub-shares can copy chosen settings from the parent share. [ QSTOR-12486 ]
* Added: a helper script to create and distribute the HA VIF's Kerberos identity. [ QSTOR-12574 ]
* Fixed: AD user and group searches used the previous domain settings for up to 5 minutes after a join or leave. [ QSTOR-12818 ]
 
Quantastor CLI
* Changed: qs osd-rep --disk accepts any identifier shown by qs pd-list. [ QSTOR-11920 ]
* Changed: qs osd-rep-prep finds the OSD's storage system from the OSD name, so --storage-system is optional. [ QSTOR-11921 ]
* Fixed: qs disk-list reported "disk not found" for a malformed --filter instead of a syntax error. [ QSTOR-11950 ]
* Fixed: qs --json output is now valid JSON. [ QSTOR-12003 ]
* Fixed: qs CLI commands that cannot preview now refuse --dry-run-only instead of running for real (for example disk-format, cephfs-create, site-vif-create and pool-create). [ QSTOR-12471 ]
 
REST API
* Added: an OpenAPI 3.0.3 specification for the QuantaStor REST API, for use with Swagger UI, Redoc, Postman and client generators. [ QSTOR-12675 ]
 
Remote Replication, Snapshots and Backup Policies
* Added: new backup policies can absorb snapshots from previous backup policies. [ QSTOR-10809 ]
* Fixed: Ceph RBD replication failed. [ QSTOR-10842 ]
* Fixed: a replication schedule could include both a parent share and its nested share, causing replication errors. [ QSTOR-11327 ]
* Added: snapshots with long-term retention now show their expiration date. [ QSTOR-11718 ]
* Fixed: some replication failures on scale-up datasets were not caught. [ QSTOR-11839 ]
* Added: a CLI command to clean up snapshots created by a replication schedule. [ QSTOR-11867 ]
* Fixed: the replication report skipped some failed replications in its total. [ QSTOR-11891 ]
* Added: snapshot schedules can create non-atomic snapshots. [ QSTOR-11913 ]
* Fixed: pool import now restores volume and share membership in snapshot and replication schedules. [ QSTOR-12115 ]
* Fixed: a scale-out replication schedule with a missing mirroring peer now fails with the reason, shown in State Detail. [ QSTOR-12693 ]
 
SCSI / NVMe Target
* Fixed: qs-util enabledualmode and disabledualmode now switch the QLogic FC driver between initiator+target and target-only mode. [ QSTOR-11791 ]
* Fixed: NVMeoF targets now always get a stable serial number derived from the volume. [ QSTOR-11851 ]
* Fixed: iSCSI ACL, host group and snapshot changes no longer reset unaffected live targets. [ QSTOR-11865 ]
* Fixed: iSCSI no longer accepts connections during boot before its targets are registered. [ QSTOR-12081 ]
* Changed: the Remove Host warning now states that existing iSCSI sessions stay connected until the initiator logs out. [ QSTOR-12518 ]
* Fixed: HPE SN1600Q and other unrecognised FC HBAs now report their vendor, and Issue FC LIP works on them. [ QSTOR-12526 ]
* Fixed: FC remote ports that left the fabric are now marked disconnected and aged out. [ QSTOR-12528 ]
* Fixed: the iSCSI service showed Running when the iSCSI target daemon was down on Ubuntu. [ QSTOR-12619 ]
 
SNMP
* Fixed SNMP alert traps, which had stopped being sent [ QSTOR-12890 ]
* Changed: the SNMP agent and QUANTASTOR-SYS-STATS MIB now include the object types added in 6.9; existing OIDs are unchanged. [ QSTOR-12897 ]
 
Security
* Added: Anomaly Detection thresholds can be auto-tuned from up to 30 days of share activity. [ QSTOR-11345 ]
* Added: Bitdefender integration. [ QSTOR-11768 ]
* Fixed: reserved client names such as admin are now rejected, so creating a client keyring can no longer wipe a node's Ceph credentials. [ QSTOR-11846 ]
* Fixed: CLI deletes that need multi-admin approval now report the approval status, and an approval expiration of 0 means never expire. [ QSTOR-11898 ]
* Fixed: Ceph client keyring files are now created with 0640 permissions instead of world-writable. [ QSTOR-11923 ]
* Fixed: restarting the appliance firewall no longer removes Docker rules or HA VIF block rules. [ QSTOR-11966 ]
* Fixed: a crash in the file system monitor at the end of the nightly WORM immutability scan. [ QSTOR-11979 ]
* Changed: OpenSSL updated to 3.5.7, with the FIPS 140 validated 3.1.2 module used automatically in FIPS mode. [ QSTOR-12037 ]
* Fixed: a command-injection vulnerability in the Alert Manager configuration (requires administrator access). [ QSTOR-12540 ]
* Fixed: LDAP/AD login passwords are no longer written to the audit log when the SSO authentication service is unavailable. [ QSTOR-12680 ]
* Fixed: the Ceph RGW keyring is now 0600, and open permissions left by earlier builds are corrected at startup. [ QSTOR-12702 ]
* Fixed: log bundles no longer include cephx keyrings or TLS private keys, and certificate template private keys are scrubbed. [ QSTOR-12733 ]
* Fixed: the Okta API token and other MFA secrets are no longer written to the service log. [ QSTOR-12762 ]
* Fixed: qs edr-agent-create rejects unknown module names before creating an agent. [ QSTOR-12764 ]
* Fixed: alert endpoint URLs, including ITSM API tokens, are now masked in the service and audit logs. [ QSTOR-12835 ]
 
Service Core
* Added: performance analysis tools (bpftrace, bpfcc-tools, iotop, fio, iozone, elbencho) and the qs-perftest utility are installed by default. [ QSTOR-10859 ]
* Fixed: log collection no longer prints per-task messages to the console. [ QSTOR-11035 ]
* Fixed: LUKS1-to-LUKS2 conversion of encrypted HA pools now handles HA and the peer node safely. [ QSTOR-11577 ]
* Fixed: adding or removing a site cluster node could fail intermittently. [ QSTOR-12014 ]
* Fixed: site VIF location weights were lost within about 40 seconds. [ QSTOR-12030 ]
* Fixed: qs-sendlogs failed on AlmaLinux 8 appliances. [ QSTOR-12086 ]
* Fixed: the event cache is now bounded, and clients resync when events are dropped, so deleted objects no longer linger in the web interface. [ QSTOR-12119 ]
* Fixed: the grid event cache could grow without limit on long-running grids. [ QSTOR-12120 ]
* Fixed: memory held by deleted objects is now reclaimed in the background. [ QSTOR-12122 ]
* Fixed: several quantastor.conf settings had no effect because of misspelled keys or the wrong section. [ QSTOR-12179 ]
* Fixed: renaming a volume left its NVMeoF subsystem under the old name, so later deletes failed. [ QSTOR-12210 ]
* Fixed: scrubbed log bundles now mask the user and client IP fields in qs_audit.log. [ QSTOR-12283 ]
* Fixed: two incorrect Site Cluster task and validation messages. [ QSTOR-12507 ]
* Fixed: log bundles shipped gzipped logs without scrubbing them. [ QSTOR-12634 ]
 
Storage Pool Management
* Added: Storage System Tuning Policy management in the web interface. [ QSTOR-11952 ]
* Changed: improved SED pool cleanup in HA configurations. [ QSTOR-11963 ]
* Added: an enclosure layout view in the Storage Pool Create and Grow dialogs that previews the vdev layout by slot. [ QSTOR-11997 ]
* Added: qs pool-grow --dry-run-only reports the planned grow without changing the pool. [ QSTOR-12309 ]
* Fixed: encrypted pools could raise a false unencrypted-disk alert and go to WARNING during discovery. [ QSTOR-12592 ]
* Fixed: creating a storage pool on WD OpenFlex Data24 drives failed. [ QSTOR-12690 ]
* Fixed: Storage Pool maintenance schedules created in the Web Manager ran scrub and trim at the wrong hour, and the dialog showed the wrong Start Time. [ QSTOR-12904 ]
 
Storage Volumes
* Added: storage volumes can be resized from a new dialog. [ QSTOR-4340 ]
* Fixed: a new storage volume could show N/A utilization instead of 0% when the system also had a pass-thru volume. [ QSTOR-9076 ]
* Added: the qs-ramdisk utility creates RAM-backed SCSI disks for transport and performance testing. [ QSTOR-10222 ]
* Added: pass-through volumes can be deleted without deleting their data, and imported. [ QSTOR-11564 ]
* Changed: storage volume assign and unassign tasks now describe what changed. [ QSTOR-11737 ]
 
Universal Containers
* Added: managed Valkey, RabbitMQ and Nextcloud container services with per-service resource limits and pool-backed storage. [ QSTOR-11859 ]
 
Upgrade Manager and Installer
* Added: qs-distupgrade checks the installed QuantaStor version against the repository and notes when the installed build is newer than the repository candidate. [ QSTOR-9961 ]
* Added: qs_kernel.sh --purge-old frees space in /boot by removing kernels that are no longer needed. [ QSTOR-10176 ]
* Fixed: the automatic support-log upload after a failed platform upgrade could hang waiting on the terminal until it timed out. [ QSTOR-11034 ]
* Added: the Ubuntu 24.04 (Noble) ISO is now published with its own latest-download link. [ QSTOR-11935 ]
* Added: the Ubuntu 24.04 (Noble) OVA is now published alongside the Jammy OVA. [ QSTOR-11996 ]
* Added: the qs-apt-channel utility switches QuantaStor repository channels, with validation and automatic rollback. [ QSTOR-12013 ]
* Fixed: the APT pin now covers every enabled QuantaStor update channel. [ QSTOR-12191 ]
* Fixed: apt failed on Focal appliances missing the older repository signing key. [ QSTOR-12209 ]
* Fixed: installation ISOs now include the current linux-firmware. [ QSTOR-12550 ]
* Fixed: upgrading from 6.8.x could leave a Tomcat process running and clear the firewall and Docker network rules mid-upgrade. [ QSTOR-12617 ]
* Fixed: the kernel and driver upgrade pass unloaded SCST before the reboot, leaving pools online but exporting no volumes. [ QSTOR-12636 ]
* Fixed: upgrades paused for about two minutes checking for snaps. [ QSTOR-12658 ]
* Fixed: switching repository channels could send the first upgrade pass to the Ubuntu archive; the qs-util apt channel commands now use qs-apt-channel. [ QSTOR-12809 ]
* Fixed: a multi-node kernel or driver upgrade with automatic reboots could wait indefinitely after a node rebooted if the package index could not be read. [ QSTOR-12864 ]
 
Web Manager
* Changed: the replication and snapshot schedule dialogs use the faster share/volume chooser. [ QSTOR-10330 ]
* Added: online, offline, attach, detach and replace for ZFS pool devices in the web interface and CLI. [ QSTOR-11031 ]
* Fixed: System Shutdown and Restart tasks never showed Completed. [ QSTOR-11190 ]
* Changed: the Storage System "Firmware Version" field is now labeled "SCSI Target Version". [ QSTOR-11864 ]
* Added: a warning in the Storage System Shutdown and Restart dialogs when Force is selected. [ QSTOR-11888 ]
* Fixed: the SMTP password show/hide toggle in the Alert Manager email settings. [ QSTOR-11904 ]
* Fixed: target ports of an offline appliance showed Normal instead of Offline. [ QSTOR-11912 ]
* Changed: the web interface now connects through the qs-rest-soap-relay service; Tomcat is no longer required. [ QSTOR-11919 ]
* Changed: clearer storage pool type labels in the pool grid. [ QSTOR-11942 ]
* Fixed: wrong labels in the Mark Universal Storage Pool Hot-Spare dialog. [ QSTOR-11964 ]
* Changed: wider Storage System, Created and IQN columns in the storage volume sessions grid. [ QSTOR-12018 ]
* Removed: Internet Explorer 11 support from the web interface; Chrome, Firefox, Safari and current Edge are unaffected. [ QSTOR-12063 ]
* Fixed: the hostname list in Modify Ceph Object Zone Group could not scroll to the end. [ QSTOR-12101 ]
* Changed: Resource Group use cases are renamed General Purpose, Service Container Management and Object Storage Tenant, with General Purpose first. [ QSTOR-12281 ]
* Added: ZFS encryption for network shares is available again in the web interface, and encrypted shares can be replicated. [ QSTOR-12301 ]
* Dialogs that select both Storage Volumes and Network Shares now show the Network Shares tab first. [ QSTOR-12303 ]
* Navigation stack labels such as "Hosts & Portal Groups" are no longer cropped at 125% browser zoom. [ QSTOR-12313 ]
* Changed: darker dark-mode surfaces with better contrast. [ QSTOR-12314 ]
* Fixed: hard-to-read Grid dashboard tile text and toolbar selection. [ QSTOR-12326 ]
* Fixed: the enclosure diagram disappeared after zooming in the Storage Pools and Ceph OSD views. [ QSTOR-12337 ]
* Fixed: the pool Identify action opened the wrong dialog. [ QSTOR-12367 ]
* Fixed: Expand Storage Pool was offered on encrypted pools, and RAID10 offered an unsupported 4-way mirror. [ QSTOR-12368 ]
* Fixed: incorrect labels and tooltips in the Storage Pool dialogs. [ QSTOR-12369 ]
* Fixed: incorrect help text and retention tooltip in the Snapshot Schedule dialogs. [ QSTOR-12379 ]
* Fixed: the Add/Remove Pools tooltip described pool selection incorrectly. [ QSTOR-12424 ]
* Fixed: the Add/Remove Pools alert named the wrong object, and the Storage Tier utilization bar was wrong when a tier had no free space. [ QSTOR-12427 ]
* Fixed: the Grid View CPU temperature indicator colours. [ QSTOR-12452 ]
* Fixed: input validation mismatches in several dialogs. [ QSTOR-12453 ]
* Fixed: the External Dashboards toolbar did not refresh after dashboards were added or removed. [ QSTOR-12454 ]
* The dashboard time scale list now offers only the windows a view can plot, so the Trends views no longer show a range the chart is not using. [ QSTOR-12456 ]
* Fixed: the Latency chart legend showed the raw field name io_time. [ QSTOR-12457 ]
* Fixed: incorrect strings in the scale-out block dialogs. [ QSTOR-12466 ]
* The Send Support Log Files dialog is now named consistently across the toolbar, the right-click menu and the dialog title. [ QSTOR-12502 ]
* Fixed: the Getting Started dialog hid the Storage Grid Setup workflow from users without the Users & Groups tab. [ QSTOR-12511 ]
* Changed: Getting Started workflow headings are now localizable. [ QSTOR-12512 ]
* Fixed: searching for an FC WWPN in the Add Host dialog stopped all task and event updates until a page reload. [ QSTOR-12559 ]
* Fixed: a thick border around the paged Storage Volumes, Network Shares and Physical Disks grids. [ QSTOR-12650 ]
* Fixed: the Storage Pool menu and dialogs no longer offer Modify or Delete for scale-out object pool groups. [ QSTOR-12676 ]
 
=== Security Notes ===
38 security notices published since v6.8.6.015 (September 14, 2026) affect this release: 28 fixed in this release, 5 fixed by a QuantaStor security update, 5 pending a fix (12 externally-facing, 26 internally-facing). See [https://wiki.osnexus.com/security/?release=6.9.0.464 QuantaStor Security Notices for v6.9.0.464].
 
== v6.8.6.015  (September 14th 2026) ==
 
=== [[QuantaStor 6.8.6 Upgrade Instructions | Upgrade Instructions]] ===
Click [[QuantaStor 6.8.6 Upgrade Instructions | here]] for instructions on [[QuantaStor 6.8.6 Upgrade Instructions | upgrading to QuantaStor v6.8.6]].
 
=== Release Notes ===
 
Alerts and Configuration Analysis
* Fixed: disk health WARNING states detected through storcli2 or SMART now raise a Disk Health alert (email/SNMP) instead of only showing in the Physical Disks view. [ QSTOR-12144 ]
 
Ceph Scale-out Block, Object and File
* Fixed: Scale-out Storage Cluster creation now works on routed fabrics where the selected member ports share no common subnet. [ QSTOR-12484 ]
 
Enclosures and Controllers
* Fixed: garbled or incomplete storcli output is now treated as unreliable instead of marking controllers and disks as missing. [ QSTOR-12118 ]
 
Network Shares
* Fixed: HA VIF SMB authentication in Kerberos-only Active Directory environments. [ QSTOR-11685 ]
 
Remote Replication, Snapshots and Backup Policies
* Fixed the replication-schedule volume picker so it no longer hides eligible volumes whose owning node changed after an HA failover. [ QSTOR-11775 ]
* Fixed problem with backup job cancel not stopping the process. [ QSTOR-11877 ]
 
SCSI / NVMe Target
* Fixed: network ports with iSCSI/NVMe-oF disabled are never exposed as allowed iSCSI portals, including after a service restart. [ QSTOR-12330 ]
 
Storage Pool Management
* Fixed: the service no longer runs zpool status -v on the startup import path, so a pool with many data errors no longer blocks service startup. [ QSTOR-11654 ]
* Fixed: the QuantaStor service starts after multipathd so pools with many multipath devices no longer start degraded at boot. [ QSTOR-12108 ]
* Fixed: a degraded pool's missing or faulted devices now stay visible in the Storage Pool Devices view with their state instead of disappearing from the list. [ QSTOR-12109 ]
 
Upgrade Manager and Installer
* Fixed: the el8 install no longer fails on the retired ipmiutil package. [ QSTOR-12257 ]
* Fixed: ISO images now carry the Ubuntu security updates for packages that reach the ISO only as dependencies. [ QSTOR-12259 ]
* Fixed: focal installs trust the current OSNEXUS repository signing key, so package upgrades from the public repository work. [ QSTOR-12274 ]
* Fixed: core-only upgrades now refresh the qstorkeyring package so repository trust updates reach every upgrade path. [ QSTOR-12280 ]
* Fixed: the install scripts trust only the current OSNEXUS repository signing keys instead of importing the published keyring wholesale. [ QSTOR-12293 ]
 
Web Manager
* Fixed: logging out of the web interface as a non-default administrator or non-admin user no longer logs a false authentication failure or raises spurious 'User Authentication Failed' alerts. [ QSTOR-11701 ]
 
=== Security Notes ===
33 security notices published since v6.8.5.018 (August 19, 2026) affect this release: 18 fixed in this release, 12 fixed by a QuantaStor security update, 2 pending a fix, 1 pending a kernel update (18 externally-facing, 15 internally-facing). See [https://wiki.osnexus.com/security/?release=6.8.6.015 QuantaStor Security Notices for v6.8.6.015].
 
== v6.8.5.018  (August 19th 2026) ==
 
=== [[QuantaStor 6.8.5 Upgrade Instructions | Upgrade Instructions]] ===
Click [[QuantaStor 6.8.5 Upgrade Instructions | here]] for instructions on [[QuantaStor 6.8.5 Upgrade Instructions | upgrading to QuantaStor v6.8.5]].
 
=== Release Notes ===
 
Ceph Scale-out Block, Object and File
* Fixed: RGW auto-tiering rules now apply to tenant-scoped buckets; the tiering script is installed for every tenant instead of only the default one. [ QSTOR-12223 ]
* Added: auto-tiering rules can now be scoped to a tenant from the web interface and CLI - all tenants, buckets outside any tenant, or a named tenant. [ QSTOR-12225 ]
* Changed: named-tenant matching is now exact ('sc2' no longer also matches 'sc2_prod'); no rule created in the web interface could carry a named tenant before this change, so no existing configuration is affected. [ QSTOR-12225 ]
 
Enclosures and Controllers
* Fixed: Supermicro SC846 and SC847 enclosures reporting vendor SMC now match their JBOD layout profile instead of logging a layout detection failure on every discovery cycle. [ QSTOR-11947 ]
* Fixed: disks could remain displayed under a 9600-series HBA after the attached storage was removed, because a successful-but-empty discovery result was treated as a command failure and the disk list was never refreshed. [ QSTOR-12036 ]
 
Network Shares
* Fixed: Active Directory user and group lookups no longer fail intermittently where a domain controller address reverse-resolves to a name other than the controller own name. [ QSTOR-12214 ]
* Added: a domain-join option that disables reverse DNS canonicalization and sends user and group lookups to every pinned domain controller. [ QSTOR-12214 ]
* Fixed: an Active Directory user/group search now reports why it could not run, instead of always blaming a trusted-domain search filter. [ QSTOR-12216 ]
 
Service Core
* Fixed a qs_service crash under sustained DB connection pool exhaustion on large Ceph/S3 grids by serializing and capping overflow connection creation. [ QSTOR-11580 ]
* Fixed: a task that failed to resume after a service restart could block every other task from resuming. [ QSTOR-12218 ]
* Fixed: the task resume limit was not enforced for some task types, so a task that could never finish was retried on every service start. [ QSTOR-12218 ]
 
Storage Pool Management
* Added capability to simulate Corvault configurations in order to test pool configurations for redundancy. [ QSTOR-11945 ]
 
Upgrade Manager and Installer
* Fixed: a storage system upgrade task could stop resuming after the second service restart, leaving a completed upgrade reported as stuck at 30%. [ QSTOR-12177 ]
* Fixed: leftover upgrade progress files were never purged, so a finished upgrade could keep reporting stale progress. [ QSTOR-12219 ]
* Fixed: 6.8.4 ISO and OVA images were missing qstortomcat, qstorrest, qstoraws and qstorbase, which left the web interface unavailable after an offline install. The images have been rebuilt. [ QSTOR-12237 ]
* Added: an ISO build now fails if a package it declares is absent, so an incomplete image cannot ship. [ QSTOR-12237 ]
 
=== Security Notes ===
5 security notices published since v6.8.4.038 (August 13, 2026) affect this release: 5 fixed by a QuantaStor security update (3 externally-facing, 2 internally-facing). See [https://wiki.osnexus.com/security/?release=6.8.5.018 QuantaStor Security Notices for v6.8.5.018].
 
== v6.8.4.038  (August 13th 2026) ==
 
=== [[QuantaStor 6.8.4 Upgrade Instructions | Upgrade Instructions]] ===
Click [[QuantaStor 6.8.4 Upgrade Instructions | here]] for instructions on [[QuantaStor 6.8.4 Upgrade Instructions | upgrading to QuantaStor v6.8.4]].
 
=== Release Notes ===
 
Ceph Scale-out Block, Object and File
* Fixed an issue where the Ceph Cluster Coordinator role could become stuck on one node. The automatic fallback election methods (grid-primary, site-primary, mon-rank) were not taking effect, so when no designated coordinator was set, coordinatorship never moved (e.g. after changing the grid master). Automatic coordinator election now works correctly; explicitly designated coordinators were unaffected. [ QSTOR-12194 ]
 
Dashboards and Analytics
* Fixed the Ceph RGW dashboard on Ceph Tentacle so it correctly reports throughput/latency when transferring files to a bucket. [ QSTOR-11803 ]
 
High Availability Failover
* Fixed the script to set the device reservation ability on WD Openflex Data24 [ QSTOR-12117 ]
* Fixed site cluster heartbeat rings so each ring keeps its own network address and member list. Previously the rings of a multi-ring site collapsed into a single entry with no subnet shown. [ QSTOR-12159 ]
 
Network Shares
* Adds an explicit domain controller to the GSSAPI ldapsearch for Active Directory user and group lookups, fixing intermittent failures on multi-controller domains. Domain joins also wait longer for a busy controller. [ QSTOR-11939 ]
* Added a cleanup-only mode to the Active Directory leave operation that reverts the local domain configuration without contacting the domain controller, for recovering from a failed or partial leave. [ QSTOR-12058 ]
* Fixed: SMB/DFS network share namespace referrals now advertise all of an appliance's reachable addresses rather than just one, so clients on any subnet can reach the share. [ QSTOR-12107 ]
* Fixed per-user share permissions so an existing entry with no recorded read/write/execute setting is treated as full access rather than no access. Modifying a share no longer rewrites ACLs when no permission actually changed. [ QSTOR-12113 ]
* Fixed Active Directory joins in SSSD-only mode against Windows Server 2025 domain controllers, which previously failed to set the machine account password. [ QSTOR-12141 ]
* Fixed placeholder values such as None, null or undefined sent by API clients being written into the Samba configuration, which stopped Samba loading the file and took SMB access down for every share on the node. [ QSTOR-12152 ]
* Fixed the Active Directory leave hanging when the PDC Emulator is offline. The leave now completes within a bounded timeout and reverts the local configuration. [ QSTOR-12161 ]
 
=== Security Notes ===
2 security notices published since v6.8.3.018 (August 6, 2026) affect this release: 1 fixed by a QuantaStor security update, 1 pending a fix (1 externally-facing, 1 internally-facing). See [https://wiki.osnexus.com/security/?release=6.8.4.038 QuantaStor Security Notices for v6.8.4.038].
 
== v6.8.3.018  (August 6th 2026) ==
 
=== [[QuantaStor 6.8.3 Upgrade Instructions | Upgrade Instructions]] ===
Click [[QuantaStor 6.8.3 Upgrade Instructions | here]] for instructions on [[QuantaStor 6.8.3 Upgrade Instructions | upgrading to QuantaStor v6.8.3]].
 
=== Release Notes ===
 
Ceph Scale-out Block, Object and File
* Creating or removing a Ceph object storage class now commits the RGW period so it takes effect immediately. [ QSTOR-11938 ]
* A failed bucket enumeration is no longer treated as an empty list, which could silently drop bucket configuration. [ QSTOR-12130 ]
* Ceph object pool group creation now commits the RGW period, fixing persistent RGW realm/master-zone errors. [ QSTOR-12132 ]
 
Network Shares
* Fixed Active Directory join failures on domains that use older Kerberos encryption methods. [ QSTOR-11646 ]
* Changed: Active Directory joins now set 'restrict anonymous = 2' in smb.conf to block unauthenticated SID/RID enumeration. [ QSTOR-11834 ]
* Fixed: Active Directory joins no longer fail when the computer-account OU contains a space. [ QSTOR-11895 ]
* Fixed: Active Directory joins no longer disable SASL signing in the system-wide ldap.conf. [ QSTOR-11926 ]
* Added a 'Skip DNS registration' option to the Active Directory join dialog, CLI and API for sites whose DNS is managed outside AD. [ QSTOR-12083 ]
* Fixed a custom autorid Domain Range Size being discarded during an Active Directory join. [ QSTOR-12089 ]
* The Active Directory KDC field now accepts a comma-separated list of domain controllers for Kerberos failover. [ QSTOR-12091 ]
* Active Directory joins in SSSD modes no longer force user/group enumeration, which could stall startup on large domains. [ QSTOR-12092 ]
* Fixed: Active Directory joins now send the machine-account password update to the PDC Emulator, fixing 'Message stream modified' failures. [ QSTOR-12136 ]
* Fixed: leaving an Active Directory domain now updates the web UI immediately instead of still showing the old domain. [ QSTOR-12153 ]
* Changed: the Active Directory join dialog now labels its two ID-range sections distinctly so it's clear which is being edited. [ QSTOR-12154 ]
 
Service Core
* Memory optimization for grid event handling. [ QSTOR-12112 ]
 
Upgrade Manager and Installer
* The upgrade system now fetches and verifies the latest OSNEXUS package signing key before applying updates. [ QSTOR-9551 ]
* Fixed EL8 upgrades pinning a stale awscli/qstoraws package version from the RedHat repository. [ QSTOR-11991 ]
* In-place Ceph upgrades now install the shipped Ceph 20.2.2 release instead of an older pinned version. [ QSTOR-11998 ]
* Fixed a grafana-enterprise package upgrade failure that could leave dpkg in a held state during upgrades from 6.8.1. [ QSTOR-12075 ]
* Updated the Ubuntu 24.04 upgrade configuration to the shipped kernel and Ceph 20.2.2 versions. [ QSTOR-12077 ]
 
=== Security Notes ===
6 security notices published since v6.8.2.002 (July 24, 2026) affect this release: 4 fixed in this release, 1 pending a fix, 1 pending a kernel update (4 externally-facing, 2 internally-facing). See [https://wiki.osnexus.com/security/?release=6.8.3.018 QuantaStor Security Notices for v6.8.3.018].
 
== v6.8.2.002  (July 24th 2026) ==
 
=== [[QuantaStor 6.8.2 Upgrade Instructions | Upgrade Instructions]] ===
Click [[QuantaStor 6.8.2 Upgrade Instructions | here]] for instructions on [[QuantaStor 6.8.2 Upgrade Instructions | upgrading to QuantaStor v6.8.2]].
 
=== Release Notes ===
 
Network Shares
* Fixed: AD groups could not be added to a Network Share ACL in Winbind+SSSD mode (group@DOMAIN form could not be resolved). [ QSTOR-12025 ]
 
 
=== Security Notes ===
17 security notices published since v6.8.1.007 (July 18, 2026) affect this release: 7 fixed in this release, 8 fixed by a QuantaStor security update, 2 pending a fix (4 externally-facing, 13 internally-facing). See [https://wiki.osnexus.com/security/?release=6.8.2.002 QuantaStor Security Notices for v6.8.2.002].
 
== v6.8.1.007  (July 18th 2026) ==
 
=== [[QuantaStor 6.8.1 Upgrade Instructions | Upgrade Instructions]] ===
Click [[QuantaStor 6.8.1 Upgrade Instructions | here]] for instructions on [[QuantaStor 6.8.1 Upgrade Instructions | upgrading to QuantaStor v6.8.1]].
 
=== Release Notes ===
 
Upgrade Manager and Installer
* Fixed: platform upgrades remove the obsolete linux-tools-common package that could trigger security alerts. [ QSTOR-10314 ]
* Changed: qs-distupgrade output is timestamped and includes a pre-upgrade configuration report. [ QSTOR-11632 ]
* Added: platform distribution upgrade (qs-distupgrade) from Ubuntu 22.04 to 24.04. [ QSTOR-11651 ]
* Added: non-interactive flags for qs-distupgrade enabling fully unattended platform upgrades with automatic reboot. Use the qs-distupgrade --help to review the available usage options. [ QSTOR-11918 ]
* Fixed: platform distribution upgrades keep Ceph pinned at its current version. [ QSTOR-11955 ]
* Added: qs-distupgrade requires all Ceph nodes on the latest offered Ceph version (--skip-check-ceph-latest to override). [ QSTOR-11958 ]
* Fixed: coordinated Ceph upgrades restart all RGW daemons on hosts running multiple RGW services. [ QSTOR-11983 ]
* Fixed: a 6.8.0-only issue where service-driven package upgrades reported success without installing anything. [ QSTOR-11992 ]
 
 
 
 
 
 
=== Security Notes ===
11 security notices published since v6.8.0.205 (July 8, 2026) affect this release: 6 fixed in this release, 5 fixed by a QuantaStor security update (3 externally-facing, 8 internally-facing). See [https://wiki.osnexus.com/security/?release=6.8.1.007 QuantaStor Security Notices for v6.8.1.007].
 
== v6.8.0.205  (July 8th 2026) ==
 
=== [[QuantaStor 6.8.0 Upgrade Instructions | Upgrade Instructions]] ===
Click [[QuantaStor 6.8.0 Upgrade Instructions | here]] for instructions on [[QuantaStor 6.8.0 Upgrade Instructions | upgrading to QuantaStor v6.8.0]].
 
=== Release Notes ===
 
Alerts and Configuration Analysis
* Added alert webhook support for Google Chat. [ QSTOR-9793 ]
* Allow users to have a subset of alert subscriptions. [ QSTOR-11683 ]
 
Ceph Scale-out Block, Object and File
* Added an 'Enable Versioning' checkbox to the Create Bucket dialog (automatically enabled when object locking or governance/compliance is selected); versioning can also be enabled on existing buckets. [ QSTOR-10937 ]
* Added Ceph Tentacle 20.2.2 support to the Jammy QuantaStor ISO and package mirror. [ QSTOR-11441 ]
* QuantaStor 6.8 ships Ceph 20.2.2 (Tentacle), which includes the upstream MDS fix (tracker #76031) for the SIGABRT/crash on client eviction caused by a null MDRequestRef under sustained metadata contention. [ QSTOR-11504 ]
* The Ceph Tentacle 20.2.2 release resolves frequent radosgw (RGW) crashes related to Kafka bucket notifications. [ QSTOR-11687 ]
* Fix ceph bucket delete with large number of objects timing out. [ QSTOR-11728 ]
* Removed: the deprecated S3 bucket orphan-object cleanup feature; any existing scheduled task is disabled automatically on upgrade. [ QSTOR-11729 ]
* Fixed a regression where deleting multiple Ceph (RBD) volumes at once on a multi-node cluster would fail after the first volume. [ QSTOR-11756 ]
* Added support for major-version Ceph upgrades (through Tentacle 20.2.x) in the upgrade script. [ QSTOR-11762 ]
* Increase the timeout for "Add Node" to a ceph cluster [ QSTOR-11906 ]
 
Dashboards and Analytics
* Added: a 'qs-statsdb resetpassword' command to rotate the InfluxDB stats password; telegraf is updated in lockstep so dashboards keep working. [ QSTOR-11170 ]
* Rebuilt bundled telegraf with its vendored rclone library updated to 1.74.3, clearing CVE-2026-41176 and CVE-2026-41179. [ QSTOR-11771 ]
 
Enclosures and Controllers
* Fixed issue with "disappearing" enclosures [ QSTOR-11676 ]
* Added support for the Supermicro SSG-222B-NE3X24R all-NVMe server, including hardware enclosure auto-detection, enclosure layout and diagram, and NVMe drive slot mapping in the QuantaStor web management interface. [ QSTOR-11712 ]
 
High Availability Failover
* Add logging for manually run iofence commands [ QSTOR-11751 ]
* Fixed HA pool failover persisting a stale size=0 / isMounted=false when the pool's datasets were still mounting during fast-import; the last-known-good size and mount state are now preserved (and the corrected record wins via a bumped modified timestamp). [ QSTOR-11818 ]
* Fixed: Storage Pool HA io-fencing and failover now work over NVMe-TCP; target namespaces advertise persistent reservations. [ QSTOR-11850 ]
 
Kernel and Drivers
* Updated Jammy platform Kernel to 6.8.0-90-generic [ QSTOR-10903 ]
* Updated Jammy platform ZFS driver to 2.3.5 [ QSTOR-10903 ]
* Updated Jammy platform SCST driver to 3.10 [ QSTOR-10903 ]
* Updated Jammy platform mpi3mr driver to 8.15.1.0.0 [ QSTOR-10903 ]
* Updated the Mellanox OFED driver installer for current Ubuntu 22.04 (Jammy) kernels, fixing driver installation failures on recent kernels. [ QSTOR-11709 ]
 
Multitenancy
* Added RBD namespace support, allowing multiple tenants to share a single Ceph block pool with isolated volumes. [ QSTOR-11650 ]
 
NAS Gateway / Cloud Containers
* Add a fix for Samba access to Cloud Container shares. [ QSTOR-11763 ]
* Fixed: cloud containers are now accessible over SMB, not just NFS. [ QSTOR-11824 ]
* Updated the bundled AWS CLI to version 2.35.6. [ QSTOR-11827 ]
 
Network Interfaces
* Added DOCA OFED install script for jammy and upcoming noble platforms as an optional install for latest hardware. [ QSTOR-11069 ]
* Fixed the Network Interface Rename feature on systems upgraded from older releases where the 'ip' command resides in a different path. [ QSTOR-11614 ]
* Fixed: converting a local VIF to an HA VIF now preserves the original local interface if the conversion fails, so client connectivity isn't lost. [ QSTOR-11706 ]
 
Network Shares
* Add the ability to specify per user or group permissions on Network Shares during create or modify [ QSTOR-10662 ]
* Fixed: intermittent 'NFS server not responding' stalls under load by raising the nfsd listen backlog from 64 to 4096. [ QSTOR-10872 ]
* Fixed: NFS client entries can now be added or removed on a share while a long-running replication or snapshot task is using it, instead of queuing. [ QSTOR-11571 ]
* Consolidated the Network Share create/modify dialog's Permission Settings into the File Masks tab — now a single 'File Masks & Permission Settings' tab containing Owner Permission Settings plus the Directory and File Create Permissions Masks. [ QSTOR-11625 ]
* Reduced excessive event logging (event spam) for network shares and related grid objects. [ QSTOR-11695 ]
* Fixed handling of CIFS share options so empty/null option values are no longer written to the Samba configuration. [ QSTOR-11731 ]
* Fixed an issue where an Active Directory group added to a share's permissions was not preserved, and excluded built-in/default AD groups from the group picker. [ QSTOR-11767 ]
 
Remote Replication, Snapshots and Backup Policies
* Copy source Network Share settings to the destination share after replication. [ QSTOR-5738 ]
* Add support for rollback of Storage Volumes and Network Shares for a replication schedule [ QSTOR-6227 ]
* Minor updates to the auto snapshot cleanup tasks for replication schedules. [ QSTOR-11622 ]
* Fix auto create of replication association after failover [ QSTOR-11700 ]
* Snapshot schedule now shows the state detail when schedule is disabled by user. [ QSTOR-11717 ]
* The Snapshot Schedule properties page now displays Retention Tags. [ QSTOR-11719 ]
* Changed: Auto-tier backup policies now display as 'Auto-Tier >> Outbound' instead of 'Move >> Outbound'. [ QSTOR-11764 ]
* Fixed the CLI replication-schedule rollback so volume and share names are accepted (not just IDs), and rolling back only volumes (or only shares) no longer also rolls back the other type. [ QSTOR-11814 ]
 
SCSI / NVMe Target
* Added: a 'Select Initiator...' picker in the Add Host dialog to choose a discovered FC remote initiator WWPN instead of typing it. [ QSTOR-10741 ]
* Renamed the sys-list 'Firmware Version' column to 'SCSI Target Version' and corrected the value to show the actual SCST target-driver version (e.g. scst-3.10.0.qs01-...) instead of the literal 'scst-SCST'. [ QSTOR-11854 ]
 
Security
* Added support for Okta multi-factor authentication. [ QSTOR-9399 ]
* Added Multi-Admin Approval support, allowing deletion of pools, buckets, shares, and volumes to require approval from a configurable number of administrators. [ QSTOR-11344 ]
* Fixed certificate update failures when using a certificate template, and ensured dependent services (such as HAProxy and RGW) are restarted after a certificate replacement. [ QSTOR-11678 ]
* Fixed an issue in the Security Manager dialog where it was showing the "password policy change" warning confirmation when no fields were changed. [ QSTOR-11708 ]
* InfluxDB (port 8086) now requires authentication and binds to localhost by default; remote access is opt-in via the tf_influxdb_remote_access.enable touchfile (authentication still enforced). [ QSTOR-11759 ]
* Added the Ubuntu security apt repositories to the default package sources and removed unused bundled components flagged by scanning (Chronograf, the LXD/core20/snapd snaps, the docker-scan plugin), clearing CVE-2024-41110, CVE-2026-34177/-34178/-34179, CVE-2020-14343, CVE-2025-68121, and CVE-2024-45337. [ QSTOR-11760 ]
* Rebuilt the bundled QuantaStor Go tools (qs_iofence, qs_pool_export_helper, qs_diskinfo) and s5cmd with a current Go toolchain, clearing CVE-2025-68121, CVE-2024-45337, CVE-2024-24790, CVE-2023-24540, and CVE-2023-24538. [ QSTOR-11761 ]
* Hardened the internal QuantaStor script service (scriptsvc): removed a command-injection vector in request handling and now enforce the service's authorization check on every call. Addresses ZDI-CAN-30036 [ QSTOR-11799 ]
* Made a number of usability and reliability improvements to the multi-admin delete-approval workflow. [ QSTOR-11804 ]
 
Service Core
* Fix tag-set where custom key/value tags were not appearing for User objects. [ QSTOR-11528 ]
* Improved Ceph OSD daemon restart handling during upgrades and reduced database load on large-scale clusters. [ QSTOR-11675 ]
* Fixed an issue with QuantaStor management service memory usage when a grid node was offline. [ QSTOR-11693 ]
* Improved crash handling and diagnostic tracing for coordinated tasks, during operations such as adding a Ceph RADOS Gateway across multiple nodes. [ QSTOR-11702 ]
* Improved logging and error checking for QuantaStor configuration database backups, including capturing error output when a backup fails. [ QSTOR-11742 ]
* Expanded diagnostic log collection to capture additional network routing details (ip route output and static-route configuration). [ QSTOR-11748 ]
* Fixed the Sessions view showing stale SMB/NFS client sessions that lingered after a reboot; the share session monitor now forces a full re-sync on its first poll after startup so sessions left over from before the reboot are cleared. [ QSTOR-11757 ]
* Fixed a self-sustaining grid event flood triggered when creating CephFS/CIFS network shares at scale: nodes no longer re-cache remote-origin (sync-applied) events, and CIFS options are diff-merged to secondaries, eliminating the event resync cascade. [ QSTOR-11785 ]
* qs-sendlogs now writes a qs_logs.runtime.info file recording the options and variables used during log collection, and reliably scrubs sensitive data from the collected database. [ QSTOR-11897 ]
 
Storage Pool Management
* Added automated ordered-disk-list pool creation for Seagate Corvault and WD Data24 systems, simplifying creation of fully redundant storage pools. [ QSTOR-11538 ]
* Fixed software-encrypted pool creation so a disk block-size mismatch is detected before disks are encrypted, avoiding leftover encryption mappings. [ QSTOR-11599 ]
* ZFS deduplication now uses the faster fast_dedup mode by default, improving sustained deduplication performance. [ QSTOR-11714 ]
* When a LUKS-encrypted disk member of a pool momentarily goes offline and the hot-spare swap-in completes, if the "bad" disk in question has in the meantime come back online, its iofence status, encryption status and its related properties in its respective disk object are cleared up, making the disk available for use again. [ QSTOR-11738 ]
* Resolved a boot-time race where the OS-level zfs-import-cache.service could import ZFS pools before qs_service started. QuantaStor now imports pools with cachefile=none, masks the zfs-import-cache and zfs-import-scan services on install and upgrade, and clears the stale global ZFS cache file at boot, ensuring QuantaStor remains the sole coordinator of pool imports. [ QSTOR-11752 ]
* Add the ability to create a Storage Pool checkpoint for scale-up pools [ QSTOR-11784 ]
* Added a support-only, touchfile-gated pool-export triage call-out (qs_pool_export_triage.sh) that gathers diagnostics when a share or volume is still open during a storage pool export. Off by default (enabled via the tf_pool_export_triage.enable touchfile). [ QSTOR-11807 ]
* Resolved issue preventing HA failover functionality using SED drives. [ QSTOR-11832 ]
 
Upgrade Manager and Installer
* Added retry logic with a timeout to the Ceph upgrade script's daemon restarts so transient restart failures no longer abort the upgrade. [ QSTOR-10598 ]
* Fixed focal-to-jammy distribution upgrades leaving the HA cluster service (pcsd/pacemaker) inoperative due to a missing ruby-webrick dependency on Ruby 3.0+. The upgrade now installs ruby-webrick so HA failover keeps working. [ QSTOR-11841 ]
* Fixed focal-to-jammy distribution upgrades that could abort and roll back when Ubuntu's unattended-upgrades/apt-daily held the apt lock or needrestart blocked on a prompt. QuantaStor now disables automatic apt upgrades and runs the distribution upgrade non-interactively. [ QSTOR-11874 ]
* Fixed a Noble (24.04) upgrade failure where qs-upgrade aborted because the dpkg package version string could not be parsed. QuantaStor now compares Debian package versions using dpkg's native version ordering. [ QSTOR-11881 ]
 
Web Manager
* Minor fix to the "Copy to Clipboard" for task descriptions [ QSTOR-9574 ]
* Added a method field and a sortable timestamp column to the web interface Audit Log Analyzer. [ QSTOR-11191 ]
* Updated web interface translations across the major supported languages. [ QSTOR-11585 ]
* Added a 'Create Share' option to the share template menu to quickly create a share applying all of a template's settings. [ QSTOR-11595 ]
* Fixed the web interface to display all configured Ceph MDS daemons instead of limiting the list to five. [ QSTOR-11615 ]
* Add auto select convenience buttons to the Storage Volume multi-delete dialog. [ QSTOR-11707 ]
 
 
=== Security Notes ===
12 security notices published since v6.7.6.001 (June 25, 2026) affect this release: 3 fixed in this release, 9 fixed by a QuantaStor security update (3 externally-facing, 9 internally-facing). See [https://wiki.osnexus.com/security/?release=6.8.0.205 QuantaStor Security Notices for v6.8.0.205].
 
= Archived Change Logs =
 
== [[Change Log Archive 2026]] ==
 
== [[Change Log Archive 2025]] ==
 
== [[Change Log Archive 2024]] ==
 
== [[Change Log Archive 2023]] ==
 
== [[Change Log Archive 2022]] ==
 
== [[Change Log Archive 2021]] ==
 
== [[Change Log Archive 2020]] ==
 
== [[Change Log Archive 2019]] ==
 
== [[Change Log Archive 2018]] ==
 
== [[Change Log Archive|Change Log Archive pre-2018]] ==
 
Select the link above to see the [[Change Log Archive]] of older revisions.

Latest revision as of 16:31, 17 November 2026

Change Log Overview

The change log contains a detailed summary of the changes made for each new release of QuantaStor. Each change made to QuantaStor is tracked with an engineering ticket number in the form [QSTOR-NNNN]. This information is provided so that if you're working with OSNexus support you can track the availability of a given product feature add, improvement, or maintenance fix to a specific release. For information on how to upgrade your storage system please see the Upgrade Guide.

Versioning System

QuantaStor version numbers consist of four (4) parts. A major number (M), minor number (N), maintenance update number (U) and build number (B) of the form M.N.U.B such as 6.0.2.006.

QuantaStor upgrades go directly from whatever version you are running to the latest version, with no interim steps so for example if you are at v6.0.1 you will upgrade directly to the latest version which may be v6.1.2

Product Update Types

Major Updates (X.y.z)

If the first digit in the version number has changed this indicates a major product release such as QuantaStor v5 to QuantaStor v6. Major releases generally come with a new underlying Linux platform as the basis. For example, the standard ISO install for QuantaStor v5 is based on Ubuntu 18.04 whereas QuantaStor v6 is based on Ubuntu 20.04. Major product releases generally include new features and maintenance updates and are supported on multiple underlying Linux platforms. For example, QuantaStor v6 is available as an upgrade on Ubuntu 18.04 and Ubuntu 20.04 based systems as well as RHEL and RHEL derivative platforms. Platform upgrades to move systems forward (eg 18.04 to 20.04) are made generally available in the first feature update release, such as QuantaStor 6.1.

Feature Updates (x.Y.z)

If the second digit in the version number has changed this indicates a feature release such as 6.1 going to 6.2. Feature releases add new product features as well as a maintenance updates. No additional licensing is required to access any new features that added but note that QuantaStor licenses do not include licenses for 3rd party products and services that may integrate with QuantaStor.

Maintenance Updates (x.y.Z)

If the third digit of the version number has changed this such as 6.0.2 or 6.0.3 it represents a maintenance update to address one or more support tickets. These updates generally do not contain new features, only fixes to address specific issues. Maintenance releases generally ship every 4 to 8 weeks. All maintenance "aka hot-fix" releases are provided against the current stable release so upgrading to the latest QuantaStor version is generally required to apply them.

Build Number (x.y.z.BBB)

The build number and corresponding build reference hash can be largely ignored. The build number simply increments with each commit that is made to the source tree. The hash is provided to make it easier for OSNEXUS support and engineering to quickly confirm difference between your current running release and any more modern release.

Boot Install Image and other downloads

ISO/DVD/USB Boot Install Image

NOTE: Archived older versions of QuantaStor ISO install media and CLI tools can be found here.

Recent Change Logs

New Security Notices

No security notices published since the latest release, v7.0.1.147 (November 17, 2026), affect QuantaStor. Last checked November 17, 2026.

v7.0.1.147 (November 17th 2026)

Upgrade Instructions

Click here for instructions on upgrading to QuantaStor v7.0.1.

Release Notes

Alerts and Configuration Analysis

  • Fixed: Pacemaker node-down and node-up alerts not reaching QuantaStor on Ubuntu 24.04. [ QSTOR-12546 ]
  • Fixed share quota Warning and Urgent alerts not being raised again when another share entered a free-space band that had already alerted. [ QSTOR-12827 ]
  • Fixed: alert-config-set --pause-alerts accepting invalid pause periods and unknown alert types. [ QSTOR-12838 ]

Ceph Scale-out Block, Object and File

  • Fixed S3 gateways that stopped answering requests while their service was still running not being detected or alerted. [ QSTOR-10646 ]
  • Fixed: a failed Ceph cluster create no longer leaves leftovers that block every later create on those nodes. [ QSTOR-12224 ]
  • Fixed: Object Pool Group creation failing when the Ceph cluster already had the default RGW zone group. [ QSTOR-12271 ]
  • Fixed: S3 requests by hostname failing with NoSuchBucket on nodes with no DNS search domain. [ QSTOR-12749 ]
  • Fixed: cloud storage classes created in the web interface now write tiered objects to the destination bucket you choose. [ QSTOR-12857 ]
  • Added: a Ceph-over-ZFS Optimized tuning profile. [ QSTOR-12869 ]
  • Fixed: encrypted Ceph OSDs failing to start after a reboot that followed an OSD encryption key replace. [ QSTOR-12914 ]
  • Fixed: the Ubuntu 22.04 to 24.04 platform upgrade on Ceph cluster nodes marking OSDs out while the node was upgraded. [ QSTOR-12917 ]
  • Fixed a new Ceph RBD volume sometimes being mapped twice on the node that created it, which made deleting the volume fail with 'image has watchers'. [ QSTOR-12990 ]
  • Fixed a force-deleted Ceph pool leaving its RBD volumes mapped on every node. [ QSTOR-12991 ]
  • Fixed: the HAProxy load balancer not working on Ceph cluster members without a local RADOS gateway. [ QSTOR-13066 ]
  • Fixed: encrypted Ceph OSDs failing authentication after a restart following a cephx key conversion. [ QSTOR-13126 ]
  • Fixed: S3 auto-tiering for tenant buckets stopping after a coordinated Ceph upgrade from Reef to 20.2.x. [ QSTOR-13141 ]
  • New Ceph clusters no longer enable discard on every OSD, and existing clusters have it turned off without restarting OSDs. [ QSTOR-13172 ]
  • Delete Storage Class now opens on the right-clicked storage class, and STANDARD no longer offers Delete. [ QSTOR-13221 ]

Dashboards and Analytics

  • Fixed: performance dashboards showing no data or wrong values for NFS and SMB shares and Ceph pools, OSDs, MDS and RGW. [ QSTOR-13128 ]
  • Fixed: install-ceph-prometheus now runs on QuantaStor 7.0 (Ubuntu 24.04) and installs current Prometheus releases. [ QSTOR-13315 ]

Enclosures and Controllers

  • Fixed: a long-running disk identify blocking the request to turn the light off, and ignoring cancel. [ QSTOR-12785 ]
  • Fixed: disk identify failing to blink drives on some enclosures. [ QSTOR-12844 ]
  • Fixed: a failed disk identify blink now reports an error instead of Completed. [ QSTOR-12845 ]
  • Added: an option to create Corvault disk groups and pools interleaved. [ QSTOR-12955 ]
  • Fixed: enclosure auto-detection never selecting the Supermicro SC946 60-bay JBOD layouts. [ QSTOR-12966 ]
  • Fixed: External System Profile Apply ignoring the Assign to Hosts setting. [ QSTOR-13068 ]
  • Fixed: NVMe drives in the Supermicro ASG-2115S-NE332R getting no drive slot, so Identify could not light their bays. [ QSTOR-13103 ]

High Availability Failover

  • Fixed a node placed in manual standby returning to Active when another cluster node's name starts with the same name. [ QSTOR-11917 ]
  • Creating a site virtual interface right after creating its site cluster now succeeds, and a failed create no longer leaves the address active. [ QSTOR-12473 ]
  • Unmanaged virtual interface messages and refused manual failovers now say when the site cluster is in maintenance mode. [ QSTOR-12475 ]
  • Fixed a storage pool that had stopped writing to disk being reported healthy with no alert. [ QSTOR-12667 ]
  • Fixed: when a pool export overran the HA group's Export Timeout, failover imported the pool without first fencing the exporting node. [ QSTOR-12671 ]
  • Fixed: a storage pool import reporting Completed when the pool could not be imported. [ QSTOR-12674 ]
  • Fixed: a service restart or one HA pool's failover moving another HA pool off its healthy node. [ QSTOR-12763 ]
  • Fixed: stopping HA cluster services on a node giving up after 15 seconds and leaving the services in an inconsistent state. [ QSTOR-12834 ]
  • Fixed package updates on Ubuntu 24.04 restarting HA cluster services, which could cause an unplanned HA pool failover. [ QSTOR-12913 ]
  • Fixed site-vif-delete --convert-to-vif briefly dropping the IP address and raising HA group maintenance mode alerts. [ QSTOR-12931 ]
  • HA nodes no longer report a failed lock manager service at every boot. [ QSTOR-13021 ]
  • Fixed: adding a second cluster ring to an HA pair with clustered persistent reservations no longer hangs the peer node. [ QSTOR-13115 ]
  • Fixed restarting Pacemaker on an HA node with clustered SCSI3-PR reservations taking minutes and leaving the cluster lock service failed. [ QSTOR-13175 ]
  • Fixed: corosync and pacemaker restarting within a minute of an administrator's 'pcs cluster stop'. [ QSTOR-13227 ]

NAS Gateway / Cloud Containers

  • Fixed: importing a cloud container onto an already-mounted export path leaving it without an NFS export or SMB share. [ QSTOR-12919 ]

Network Interfaces

  • Fixed: network ports no longer get renamed (eno1 to eno1np0) by kernel and distribution upgrades, which dropped IP, bond and HA VIF settings. [ QSTOR-11072 ]
  • Creating a bonded network interface no longer leaves a second, conflicting definition for the same bond in the network configuration. [ QSTOR-12097 ]
  • Fixed: an empty DNS search suffix breaking the host name and AD join, which now checks DNS identity and domain controller ports. [ QSTOR-13112 ]

Network Shares

  • Kerberos NFS (sec=krb5) users on AD-joined systems now keep their AD identity instead of nobody. [ QSTOR-8198 ]
  • Network share search is now case-insensitive, also matches share descriptions, and runs on Enter or as you type. [ QSTOR-10789 ]
  • Added: AD join can use a pre-created computer account. [ QSTOR-11334 ]
  • Fixed a share whose dataset mount hangs being retried every hour, leaking stuck processes and blocking other share operations. [ QSTOR-12664 ]
  • Fixed a storage system removed from a network share namespace continuing to advertise the namespace over SMB and NFS until another namespace change. [ QSTOR-12921 ]
  • Fixed: Changing a network share from the CLI no longer resets its owner group unless --share-owner-group is given. [ QSTOR-12945 ]
  • Fixed share rename leaving a share disabled when an NFS client had a file open, and accepting conflicting names. [ QSTOR-12993 ]
  • Fixed: AD join with a wrong administrator password now says the password is wrong. [ QSTOR-12999 ]
  • Fixed copying share settings removing SMB user access from the source share, which could leave it open to all users. [ QSTOR-13176 ]
  • Fixed: Network share owners and groups can again be set to a numeric UID or GID that has no matching user or group on the system. [ QSTOR-13320 ]

Quantastor CLI

  • Fixed sys-modify silently ignoring --domain-suffix, and DNS server changes resetting a customized host FQDN in /etc/hosts. [ QSTOR-12116 ]
  • Fixed: CLI options given as --option=false acting as if they were set to true. [ QSTOR-12782 ]
  • Fixed: qs rg-create failing when --scope-type is left at its default. [ QSTOR-12916 ]
  • Fixed: qs rg-res-add rejecting Object Tenants. [ QSTOR-12918 ]

Remote Replication, Snapshots and Backup Policies

  • Replication schedules that reference a removed storage system link now switch to the current link instead of failing every run. [ QSTOR-11735 ]
  • Fixed: a replication schedule rollback issued right after a replication run reporting Completed without restoring anything. [ QSTOR-12880 ]
  • Fixed backup policies losing their destination sub-folder on modify and jobs not reporting failures or cancels correctly. [ QSTOR-12886 ]

SCSI / NVMe Target

  • Added: Fibre Channel ports now report their negotiated and supported speeds. [ QSTOR-12855 ]
  • Fixed: a Portal Group with no portals exposing its iSCSI volumes on every portal. [ QSTOR-12996 ]
  • Added: an alert listing the iSCSI sessions closed when a Portal Group change removes a portal. [ QSTOR-13018 ]
  • Fixed NVMe/TCP volumes created on a running pool not being offered to hosts until the pool restarted or failed over. [ QSTOR-13153 ]

SNMP

  • Fixed: the SNMP agent not reporting new objects in a table that was empty when the agent started. [ QSTOR-12905 ]

Security

  • Assigning Okta MFA to a user with no email is refused with a clear error. [ QSTOR-12885 ]
  • Fixed: multi-admin approval requests not expiring on the node that created them. [ QSTOR-12981 ]
  • Updated the gSOAP library to 2.8.146, the Genivia critical security release. [ QSTOR-13088 ]
  • Added: an optional mitigation for CVE-2026-98432 (qs-util ipoptfilter enable). [ QSTOR-13148 ]

Server Integration

  • Added: a QuantaStor storage plugin for Proxmox VE with snapshots, clones, migration, backups and multipath on iSCSI volumes. [ QSTOR-10624 ]
  • Changed: the Proxmox VE plugin is now a native storage type installed from a .deb package and survives Proxmox upgrades. [ QSTOR-11575 ]
  • Added LXC container support to the QuantaStor Proxmox VE plugin: container root disks can be placed on QuantaStor iSCSI block volumes. [ QSTOR-11968 ]
  • Documented the guest I/O pause during a QuantaStor HA pool failover (about 30-45 seconds, no errors) and the iSCSI timeout guidance. [ QSTOR-12311 ]
  • Documented that storage entries from the Proxmox plugin pre-release stop working on 1.0.0 and later. [ QSTOR-12487 ]
  • Added API token authentication: a QuantaStor application token can be used in place of a password. [ QSTOR-12489 ]
  • Fixed: Proxmox snapshot deletes failing with err=493 and leaving the guest locked. [ QSTOR-12537 ]
  • Released Proxmox VE plugin 1.0.1. [ QSTOR-13004 ]
  • Added: iSCSI multipath support in the Proxmox VE plugin. [ QSTOR-13005 ]
  • Fixed: Proxmox container backups in snapshot mode failing on QuantaStor storage. [ QSTOR-13046 ]
  • Added: full clones of a Proxmox VM from a snapshot, and fixed disk creation failing with "already exists". [ QSTOR-13047 ]

Service Core

  • Fixed: Send Support Logs reporting Completed when a slow collection or upload never delivered the bundle. [ QSTOR-12703 ]
  • Fixed support bundles leaving out configuration changes made shortly before log collection. [ QSTOR-12705 ]
  • Added the Recovery Manager: generate, download, upload and restore storage system configuration bundles from the web UI and CLI. [ QSTOR-13010 ]
  • Fixed the NFS/SMB statistics collector logging sudo entries to the system log every 5 seconds. [ QSTOR-13011 ]

Storage Pool Management

  • A storage pool is no longer marked offline when a disk-space query fails or times out while the pool is still imported and serving data. [ QSTOR-12804 ]
  • Fixed: a serving storage pool being marked unmounted after a failed size check. [ QSTOR-13149 ]

Universal Containers

  • A universal container service whose port is already in use now fails to start with a clear error, instead of repeatedly restarting Docker. [ QSTOR-12329 ]
  • Fixed: a Service Container port conflict restarting Docker on the node. [ QSTOR-12898 ]

Upgrade Manager and Installer

  • Added: SHA-256 and SHA-512 checksum files for each ISO, OVA and OVA zip download, alongside the existing MD5. [ QSTOR-11155 ]
  • Changed: the Ubuntu 22.04 to 24.04 platform upgrade now requires QuantaStor 6.8.0 or later. [ QSTOR-12624 ]
  • The Ceph upgrade now rejects an invalid target Ceph version with a clear error instead of ignoring it. [ QSTOR-12627 ]
  • Fixed: Ceph upgrades failing or hanging on grids that reach the package repository through an HTTP/HTTPS proxy. [ QSTOR-12670 ]
  • Added: qs-upgrade --cephPackagesOnly upgrades the Ceph packages on a system that is not part of a Ceph cluster. [ QSTOR-12775 ]
  • Fixed: the coordinated Ceph upgrade on Ubuntu 24.04 restarting every Ceph daemon at once during the package stage. [ QSTOR-12851 ]
  • Fixed: the coordinated Ceph upgrade reporting Completed when the post-upgrade cleanup failed. [ QSTOR-13146 ]
  • Fixed: a coordinated Ceph upgrade refused with "Detected current upgrade in progress" after an earlier command-line upgrade. [ QSTOR-13163 ]
  • Fixed: upgrades not refreshing the sudoers rules used by the NFS/SMB statistics collector and Pacemaker node alerts. [ QSTOR-13164 ]

Web Manager

  • Long property values such as descriptions now wrap in the web UI property views instead of being cut off. [ QSTOR-9385 ]
  • Fixed: ribbon bar buttons no longer draw borders in dark mode. [ QSTOR-9562 ]
  • Fixed: adding a node to a running site cluster now completes and the node appears in the web UI. [ QSTOR-12005 ]
  • Fixed: Modify Grid Time Zone Settings preselecting Europe/Andorra on UTC grids, and Etc/UTC can now be selected. [ QSTOR-12519 ]
  • Fixed: tree searches now accept the same pool: and comma terms as the grids, and Physical Disks search finds disks. [ QSTOR-12819 ]
  • Fixed % Utilized progress bars flashing white while grids refresh in dark mode. [ QSTOR-13222 ]

Security Notes

19 security notices published since v6.9.2.001 (November 2, 2026) affect this release: 13 fixed in this release, 2 fixed by a QuantaStor security update, 3 pending a fix, 1 pending a kernel update (13 externally-facing, 6 internally-facing). See QuantaStor Security Notices for v7.0.1.147.

v6.9.2.001 (November 2nd 2026)

Upgrade Instructions

Click here for instructions on upgrading to QuantaStor v6.9.2.

Release Notes

Remote Replication, Snapshots and Backup Policies

  • Fixed: snapshot and replication schedules could stop running after upgrading to 6.9.1 on systems with many snapshots. [ QSTOR-13162 ]

Security Notes

No security notices published since v6.9.1.001 (October 28, 2026) affect this release.

v6.9.1.001 (October 28th 2026)

Upgrade Instructions

Click here for instructions on upgrading to QuantaStor v6.9.1.

Release Notes

Security

  • Fixed: QuantaStor failed to start in FIPS mode after upgrading to 6.9 when a 3DES-encrypted license manager certificate was present. [ QSTOR-13041 ]
  • Fixed: QuantaStor now distrusts the compromised eMudhra and Comodo AAA root CAs (USN-8944-1); please upgrade with security updates included (Core + Security, or qs-upgrade without --coreOnly) to install the change. [ QSTOR-13070 ]

Security Notes

10 security notices published since v6.9.0.464 (October 15, 2026) affect this release: 8 fixed in this release, 1 fixed by a QuantaStor security update, 1 pending a fix (5 externally-facing, 5 internally-facing). See QuantaStor Security Notices for v6.9.1.001.

v6.9.0.464 (October 15th 2026)

Upgrade Instructions

Click here for instructions on upgrading to QuantaStor v6.9.0.

Release Notes

Alerts and Configuration Analysis

  • Added: a Zabbix alert handler (Zabbix 7.0+) with an importable template of triggers and dashboards. [ QSTOR-10802 ]
  • Added: alerts can be paused. [ QSTOR-11665 ]
  • Added: alerts for scale-out share capacity thresholds. [ QSTOR-11911 ]
  • Fixed: report schedules did not save to a custom local save location. [ QSTOR-11937 ]
  • Fixed: a removed disk could keep raising a Disk Health Non-optimal alert with a blank device and serial. [ QSTOR-12230 ]
  • Changed: Discord is no longer listed by default in the Alert Manager ITSM integrations; it can be re-enabled in qs_alerthandlers.conf. [ QSTOR-12341 ]

Ceph Scale-out Block, Object and File

  • Added: replication of scale-out (CephFS) network shares to a second Ceph cluster using CephFS snapshot mirroring. [ QSTOR-9709 ]
  • Added: bucket object lifecycle policies for external S3 endpoints. [ QSTOR-11603 ]
  • Fixed: client keyrings for volumes on erasure-coded pools now include the data pool, so direct RBD mapping works. [ QSTOR-11610 ]
  • Fixed: RADOS gateway logs are now rotated daily and capped at 100 MB so they cannot fill the boot drive. [ QSTOR-11645 ]
  • Added: per-bucket rate limits on operations and bandwidth for object storage. [ QSTOR-11836 ]
  • Fixed: deleting a scale-out object pool from Storage Management now points to qs object-pool-group-delete instead of failing with an unclear error. [ QSTOR-11896 ]
  • Fixed: retrying a failed Ceph node add no longer stops with "key does not match". [ QSTOR-11907 ]
  • Fixed: qs cckr-assoc-get failed with a database column error. [ QSTOR-11924 ]
  • Fixed: deleting a Ceph pool or CephFS share now removes it from client keyrings that referenced it. [ QSTOR-11925 ]
  • Fixed: cloning a Ceph RBD volume or snapshot failed. [ QSTOR-11928 ]
  • Fixed: a failed Ceph RBD clone can now be retried, and force-deleting a Ceph pool removes its volume records. [ QSTOR-11929 ]
  • Fixed: qs osc-create rejected some recommended storage class names, such as EXPRESS_ONEZONE and OUTPOSTS. [ QSTOR-11943 ]
  • Fixed: load-balanced object storage now redirects ports 80 and 443 to the load balancer's ports instead of falling back to a single gateway. [ QSTOR-12073 ]
  • Fixed: qs object-user-create --tenant failed with "Unable to locate tenant". [ QSTOR-12123 ]
  • Changed: bucket and S3 user discovery now uses the RGW admin API, so large namespaces scan much faster and a failed gateway reply no longer removes buckets or users. [ QSTOR-12133 ]
  • Fixed: qs bucket-get now finds tenant-scoped buckets by bare name or tenant/bucket. [ QSTOR-12148 ]
  • Changed: Ceph updated to Tentacle 20.2.4 on Ubuntu 22.04 and 24.04. [ QSTOR-12162 ]
  • Fixed: a deleted object storage class data pool was recreated by the gateway; deleting the default STANDARD pool is now refused. [ QSTOR-12165 ]
  • Added: Ceph over ZFS - zvols in a ZFS storage pool (including dRAID) can be used as Ceph OSD devices. [ QSTOR-12166 ]
  • Added: storage classes can be deleted. [ QSTOR-12178 ]
  • Fixed: upgrading RGW multisite deployments to Ceph 20.2.4 keeps zones replicating, and secure SigV4 is restored once every zone is upgraded (CVE-2026-54330). [ QSTOR-12269 ]
  • Changed: Ceph 20.2.4 clusters keep legacy CephX keys so kernel clients keep working; qs ceph-cluster-key-convert converts daemon keys to aes256k (CVE-2025-30156). [ QSTOR-12270 ]
  • Fixed: RGW admin operations now use HTTPS when the gateway runs in HTTPS mode. [ QSTOR-12294 ]
  • Changed: Create Ceph Cluster reports progress per stage, and the Create OSDs dialog keeps selections when the search filter changes. [ QSTOR-12323 ]
  • Fixed: Ceph OSD creation now takes seconds instead of minutes on large devices. [ QSTOR-12332 ]
  • Changed: the default metadata DB size for new Ceph OSDs is sized from the selected devices, up to 3% of raw capacity. [ QSTOR-12461 ]
  • Added: cephfs-mirror and rbd-mirror are installed on Ubuntu 22.04 and 24.04 appliances. [ QSTOR-12547 ]
  • Fixed: Ceph OSDs on a loopback-alias public address showed Offline, and a missing OSD now raises an alert. [ QSTOR-12734 ]
  • Fixed: qs-s3util move-objects now rejects a storage class that does not exist (override with --skip-class-check). [ QSTOR-12755 ]
  • Fixed Replace OSD losing encryption and DB/WAL devices; the replacement disk is now cleared automatically and disks in use are refused. [ QSTOR-12894 ]
  • Fixed encrypted Ceph OSD key replace failing on grids with journal devices, CLI OSD create dropping DB/WAL devices when no size was given, and failed OSD creates leaving orphaned OSD IDs. [ QSTOR-12901 ]

Dashboards and Analytics

  • Added: External Dashboards - custom dashboards embedded in the Web Manager and organized into groups. [ QSTOR-9308 ]
  • Added: a View Report option to view pool reports in the web interface. [ QSTOR-9707 ]
  • Added: a network share usage tracker and dashboard, filterable by user or group. [ QSTOR-11720 ]
  • Added: a Replication view on the Share and Volume dashboards that charts replication transfer rate. [ QSTOR-12289 ]
  • Fixed: dashboard tile actions are now keyboard accessible and their colours meet WCAG AA contrast. [ QSTOR-12491 ]
  • Changed: Trends charts draw lines instead of filled areas, legends toggle series again, and the pool chart plots used space against capacity. [ QSTOR-12575 ]
  • Fixed: volume capacity and trend statistics were not recorded when optimized stats collection was enabled. [ QSTOR-12576 ]
  • Fixed: Trends and Usage windows of 12 hours or longer showed zero capacity. [ QSTOR-12577 ]
  • Fixed: updated statistics rollup settings were not applied to upgraded systems. [ QSTOR-12578 ]

Disk Management

  • Changed: removed unnecessary SMART query log messages on CORVAULT systems. [ QSTOR-11583 ]
  • Added: a [tag:VALUE] disk filter, so tagged disks can be selected by tag, for example in pool-create --disk-list. [ QSTOR-11887 ]
  • Added: a Mode option for the disk performance test to run disks serially, in parallel, or grouped by vdev or enclosure. [ QSTOR-11953 ]
  • Fixed: healthy SATA drives behind a SAS HBA raised false non-optimal health alerts. [ QSTOR-12082 ]
  • Fixed: drives behind an HPE Smart Array Gen10 HBA (smartpqi) were not shown on Ubuntu 24.04. [ QSTOR-12726 ]

Enclosures and Controllers

  • Fixed: a Seagate CORVAULT that was not fully populated was given the wrong enclosure layout, or none. [ QSTOR-12088 ]
  • Added support for the Dell PowerEdge R740xd 24-bay NVMe server, including its enclosure layout and drive slot mapping in Hardware Enclosures & Controllers. [ QSTOR-12944 ]

High Availability Failover

  • Validated: Windows Server 2022 Hyper-V failover clusters with Cluster Shared Volumes on QuantaStor Fibre Channel HA pools. [ QSTOR-10677 ]
  • Added: clustered SCSI-3 persistent reservations for HA storage pools, so client reservations (Hyper-V, Windows Server Failover Clustering) survive failover. [ QSTOR-10705 ]
  • Fixed: service SPNs on an HA VIF's AD computer object now keep working after failover. [ QSTOR-10884 ]
  • Fixed: moving a site cluster VIF to a node with no location constraint now fails at once with an explanation instead of after a minute of retries. [ QSTOR-11605 ]
  • Fixed: deleting an HA VIF from an active pool could fail the pool over to the standby node. [ QSTOR-11694 ]
  • Fixed: Set Grid Sync Master reverted within seconds on grids with a Grid Management VIF. [ QSTOR-11698 ]
  • Fixed: the FC link-state failover policy now applies only to pools that export volumes over FC. [ QSTOR-11855 ]
  • Fixed: an HA node lost its manual-standby state after a reboot or distribution upgrade. [ QSTOR-11957 ]
  • Fixed: deleting an HA pool or HA VIF could trigger a spurious failover on the peer. [ QSTOR-12002 ]
  • Fixed: a stale site-cluster association could produce a corosync configuration that stopped corosync from starting. [ QSTOR-12026 ]
  • Fixed: a manual-standby setting left over from an earlier configuration could force HA nodes into standby after an upgrade. [ QSTOR-12044 ]
  • Fixed: failed resource actions were not detected on Pacemaker 2.1, so automatic HA cleanup did not run. [ QSTOR-12080 ]
  • Fixed: HA pool failover failed on RHEL/AlmaLinux/Rocky 8 during SCST device removal (clustered SCSI-3 reservations are not available on el8). [ QSTOR-12182 ]
  • Added: HA group creation on WD Data24 checks that IO fencing is enabled. [ QSTOR-12212 ]
  • Changed: faster HA failover for pools with many volumes. [ QSTOR-12343 ]
  • Fixed: HA failover could be blocked by open files, active NFS clients or a failed export, or disconnect SMB clients of other pools. [ QSTOR-12343 ]
  • Fixed: in rare cases both HA nodes could import the same pool, for example after both were powered on at the same time. [ QSTOR-12343 ]
  • Fixed: a volume's LUN identity could change during failover, and a suspended pool or a failed pass-through volume could hang or stop the QuantaStor service. [ QSTOR-12343 ]
  • Fixed: the HA failover health check failed with a database error when an FC initiator was registered. [ QSTOR-12513 ]
  • Added: an HA group option that lets a node holding fenced, suspended pools reboot itself once the peer has taken them over. [ QSTOR-12615 ]
  • Changed: enabling clustered SCSI-3 reservations requires every HA group member to run 6.9.0 or newer with its installed SCST driver loaded. [ QSTOR-12630 ]
  • Fixed: when several volumes are assigned to a Fibre Channel host one after another, the last one is no longer left out of the pool's ALUA device group. [ QSTOR-12697 ]
  • Fixed: FC target ports are enabled only after every exported volume is mapped and its ALUA state set, so clients no longer see empty ports at startup. [ QSTOR-12724 ]
  • Changed: faster, more reliable pool import and failover. [ QSTOR-12725 ]
  • Fixed: a node taking over several HA pools now imports them in parallel. [ QSTOR-12728 ]
  • Fixed: assigning a volume while its HA pool is exporting no longer recreates targets on the exporting node. [ QSTOR-12731 ]
  • Fixed: after an HA pool owner reboots, its FC target ports return as soon as standby devices are ready instead of after 10 minutes. [ QSTOR-12765 ]
  • Fixed: Windows MPIO failed to claim a QuantaStor FC node's paths after that node rebooted (event 47). [ QSTOR-12766 ]
  • Fixed: an HA volume's standby device now reports the same provisioning, UNMAP and geometry as the volume. [ QSTOR-12771 ]
  • Fixed: deleting an HA group left the former passive node's standby devices, ALUA groups and FC LUN maps behind. [ QSTOR-12799 ]
  • Fixed: failover of an FC ALUA pool without clustered reservations now keeps clients' standby paths. [ QSTOR-12807 ]
  • Fixed: an FC ALUA takeover could activate paths before the LUNs moved off the standby devices, risking lost writes. [ QSTOR-12810 ]
  • Changed: the HA group dialogs have a new Advanced Settings tab, and the Tertiary System selection is removed. [ QSTOR-12861 ]
  • Fixed: rebooting both HA nodes at once could panic a node during shutdown. [ QSTOR-12881 ]
  • Fixed FC volume LUN numbers changing after an HA pool import and first failover, which could leave Linux initiators with standby paths to the wrong volume after the previous owner rebooted. [ QSTOR-12883 ]
  • Fixed: an HA node could take up to 30 minutes to recover cluster locking, and failover during a planned node reboot could run past iSCSI/FC client timeouts. [ QSTOR-12888 ]

Kernel and Drivers

  • Changed: Ubuntu 24.04 appliances now run kernel 6.17.0-20 with mpi3mr 8.16.1.0.0 and ixgbe 6.3.4 drivers. [ QSTOR-11647 ]
  • Changed: OpenZFS updated to 2.3.9 on Ubuntu 22.04 and 24.04, fixing a write-path livelock that could block pool export. [ QSTOR-12317 ]

Licensing

  • Added: license keys can be added to multiple grid systems at once. [ QSTOR-11930 ]
  • Fixed: online license activation failures now report the underlying cause. [ QSTOR-12034 ]

Multitenancy

  • Fixed: the Create Resource Group dialog closed when every subnet was already bound; the binding setting moved to the Service Configs tab. [ QSTOR-11186 ]

NAS Gateway / Cloud Containers

  • Fixed: auto-tiering now works on the DR site after a failover. [ QSTOR-11956 ]
  • Changed: removed Seagate Lyve Cloud cloud-provider support, as the service has been discontinued. [ QSTOR-12342 ]
  • Fixed: added cloud-container-remove and cloud-provider-remove, cloud bucket deletion now requires --delete-cloud-bucket=true, and credential removal no longer prints the secret key. [ QSTOR-12668 ]

Network Interfaces

  • Fixed: a leftover cloud-init netplan file could override QuantaStor networking after qs-distupgrade. [ QSTOR-10033 ]
  • Changed: multi-homed systems now answer ARP only on the interface that owns the address (arp_ignore=1, arp_announce=2). [ QSTOR-12324 ]
  • Added: the Docker bridge and container address pools can be moved off 172.17.0.0/16 in qs_docker.conf. [ QSTOR-12325 ]
  • Fixed: a static route duplicating an existing route left networking failed after reboot. [ QSTOR-12711 ]

Network Shares

  • Added: SFTP access to network shares. [ QSTOR-11295 ]
  • Added: NFS and SMB client I/O statistics for network shares, per share and per client. [ QSTOR-11604 ]
  • Fixed: NFSv4 mounts hung after nfsdcld failed; it is now detected, alerted on and repaired automatically. [ QSTOR-11828 ]
  • Fixed: HA pool failover did not start the NFS server on the acquiring node. [ QSTOR-11873 ]
  • Fixed: network shares, share snapshots and clones could be named with leading special characters. [ QSTOR-11916 ]
  • Added: the Join AD Domain dialog shows the hostname and FQDN the storage system will register in Active Directory. [ QSTOR-12105 ]
  • Fixed: namespace referral lists now refresh when an interface changes or goes offline. [ QSTOR-12217 ]
  • Added: a clear message when an AD user has no uidNumber/gidNumber in RFC2307 mode. [ QSTOR-12275 ]
  • Changed: the namespace dialogs use a resizable share chooser that keeps selections across searches, and searches accept pool:<name>. [ QSTOR-12290 ]
  • Added: share aliases and sub-shares can copy chosen settings from the parent share. [ QSTOR-12486 ]
  • Added: a helper script to create and distribute the HA VIF's Kerberos identity. [ QSTOR-12574 ]
  • Fixed: AD user and group searches used the previous domain settings for up to 5 minutes after a join or leave. [ QSTOR-12818 ]

Quantastor CLI

  • Changed: qs osd-rep --disk accepts any identifier shown by qs pd-list. [ QSTOR-11920 ]
  • Changed: qs osd-rep-prep finds the OSD's storage system from the OSD name, so --storage-system is optional. [ QSTOR-11921 ]
  • Fixed: qs disk-list reported "disk not found" for a malformed --filter instead of a syntax error. [ QSTOR-11950 ]
  • Fixed: qs --json output is now valid JSON. [ QSTOR-12003 ]
  • Fixed: qs CLI commands that cannot preview now refuse --dry-run-only instead of running for real (for example disk-format, cephfs-create, site-vif-create and pool-create). [ QSTOR-12471 ]

REST API

  • Added: an OpenAPI 3.0.3 specification for the QuantaStor REST API, for use with Swagger UI, Redoc, Postman and client generators. [ QSTOR-12675 ]

Remote Replication, Snapshots and Backup Policies

  • Added: new backup policies can absorb snapshots from previous backup policies. [ QSTOR-10809 ]
  • Fixed: Ceph RBD replication failed. [ QSTOR-10842 ]
  • Fixed: a replication schedule could include both a parent share and its nested share, causing replication errors. [ QSTOR-11327 ]
  • Added: snapshots with long-term retention now show their expiration date. [ QSTOR-11718 ]
  • Fixed: some replication failures on scale-up datasets were not caught. [ QSTOR-11839 ]
  • Added: a CLI command to clean up snapshots created by a replication schedule. [ QSTOR-11867 ]
  • Fixed: the replication report skipped some failed replications in its total. [ QSTOR-11891 ]
  • Added: snapshot schedules can create non-atomic snapshots. [ QSTOR-11913 ]
  • Fixed: pool import now restores volume and share membership in snapshot and replication schedules. [ QSTOR-12115 ]
  • Fixed: a scale-out replication schedule with a missing mirroring peer now fails with the reason, shown in State Detail. [ QSTOR-12693 ]

SCSI / NVMe Target

  • Fixed: qs-util enabledualmode and disabledualmode now switch the QLogic FC driver between initiator+target and target-only mode. [ QSTOR-11791 ]
  • Fixed: NVMeoF targets now always get a stable serial number derived from the volume. [ QSTOR-11851 ]
  • Fixed: iSCSI ACL, host group and snapshot changes no longer reset unaffected live targets. [ QSTOR-11865 ]
  • Fixed: iSCSI no longer accepts connections during boot before its targets are registered. [ QSTOR-12081 ]
  • Changed: the Remove Host warning now states that existing iSCSI sessions stay connected until the initiator logs out. [ QSTOR-12518 ]
  • Fixed: HPE SN1600Q and other unrecognised FC HBAs now report their vendor, and Issue FC LIP works on them. [ QSTOR-12526 ]
  • Fixed: FC remote ports that left the fabric are now marked disconnected and aged out. [ QSTOR-12528 ]
  • Fixed: the iSCSI service showed Running when the iSCSI target daemon was down on Ubuntu. [ QSTOR-12619 ]

SNMP

  • Fixed SNMP alert traps, which had stopped being sent [ QSTOR-12890 ]
  • Changed: the SNMP agent and QUANTASTOR-SYS-STATS MIB now include the object types added in 6.9; existing OIDs are unchanged. [ QSTOR-12897 ]

Security

  • Added: Anomaly Detection thresholds can be auto-tuned from up to 30 days of share activity. [ QSTOR-11345 ]
  • Added: Bitdefender integration. [ QSTOR-11768 ]
  • Fixed: reserved client names such as admin are now rejected, so creating a client keyring can no longer wipe a node's Ceph credentials. [ QSTOR-11846 ]
  • Fixed: CLI deletes that need multi-admin approval now report the approval status, and an approval expiration of 0 means never expire. [ QSTOR-11898 ]
  • Fixed: Ceph client keyring files are now created with 0640 permissions instead of world-writable. [ QSTOR-11923 ]
  • Fixed: restarting the appliance firewall no longer removes Docker rules or HA VIF block rules. [ QSTOR-11966 ]
  • Fixed: a crash in the file system monitor at the end of the nightly WORM immutability scan. [ QSTOR-11979 ]
  • Changed: OpenSSL updated to 3.5.7, with the FIPS 140 validated 3.1.2 module used automatically in FIPS mode. [ QSTOR-12037 ]
  • Fixed: a command-injection vulnerability in the Alert Manager configuration (requires administrator access). [ QSTOR-12540 ]
  • Fixed: LDAP/AD login passwords are no longer written to the audit log when the SSO authentication service is unavailable. [ QSTOR-12680 ]
  • Fixed: the Ceph RGW keyring is now 0600, and open permissions left by earlier builds are corrected at startup. [ QSTOR-12702 ]
  • Fixed: log bundles no longer include cephx keyrings or TLS private keys, and certificate template private keys are scrubbed. [ QSTOR-12733 ]
  • Fixed: the Okta API token and other MFA secrets are no longer written to the service log. [ QSTOR-12762 ]
  • Fixed: qs edr-agent-create rejects unknown module names before creating an agent. [ QSTOR-12764 ]
  • Fixed: alert endpoint URLs, including ITSM API tokens, are now masked in the service and audit logs. [ QSTOR-12835 ]

Service Core

  • Added: performance analysis tools (bpftrace, bpfcc-tools, iotop, fio, iozone, elbencho) and the qs-perftest utility are installed by default. [ QSTOR-10859 ]
  • Fixed: log collection no longer prints per-task messages to the console. [ QSTOR-11035 ]
  • Fixed: LUKS1-to-LUKS2 conversion of encrypted HA pools now handles HA and the peer node safely. [ QSTOR-11577 ]
  • Fixed: adding or removing a site cluster node could fail intermittently. [ QSTOR-12014 ]
  • Fixed: site VIF location weights were lost within about 40 seconds. [ QSTOR-12030 ]
  • Fixed: qs-sendlogs failed on AlmaLinux 8 appliances. [ QSTOR-12086 ]
  • Fixed: the event cache is now bounded, and clients resync when events are dropped, so deleted objects no longer linger in the web interface. [ QSTOR-12119 ]
  • Fixed: the grid event cache could grow without limit on long-running grids. [ QSTOR-12120 ]
  • Fixed: memory held by deleted objects is now reclaimed in the background. [ QSTOR-12122 ]
  • Fixed: several quantastor.conf settings had no effect because of misspelled keys or the wrong section. [ QSTOR-12179 ]
  • Fixed: renaming a volume left its NVMeoF subsystem under the old name, so later deletes failed. [ QSTOR-12210 ]
  • Fixed: scrubbed log bundles now mask the user and client IP fields in qs_audit.log. [ QSTOR-12283 ]
  • Fixed: two incorrect Site Cluster task and validation messages. [ QSTOR-12507 ]
  • Fixed: log bundles shipped gzipped logs without scrubbing them. [ QSTOR-12634 ]

Storage Pool Management

  • Added: Storage System Tuning Policy management in the web interface. [ QSTOR-11952 ]
  • Changed: improved SED pool cleanup in HA configurations. [ QSTOR-11963 ]
  • Added: an enclosure layout view in the Storage Pool Create and Grow dialogs that previews the vdev layout by slot. [ QSTOR-11997 ]
  • Added: qs pool-grow --dry-run-only reports the planned grow without changing the pool. [ QSTOR-12309 ]
  • Fixed: encrypted pools could raise a false unencrypted-disk alert and go to WARNING during discovery. [ QSTOR-12592 ]
  • Fixed: creating a storage pool on WD OpenFlex Data24 drives failed. [ QSTOR-12690 ]
  • Fixed: Storage Pool maintenance schedules created in the Web Manager ran scrub and trim at the wrong hour, and the dialog showed the wrong Start Time. [ QSTOR-12904 ]

Storage Volumes

  • Added: storage volumes can be resized from a new dialog. [ QSTOR-4340 ]
  • Fixed: a new storage volume could show N/A utilization instead of 0% when the system also had a pass-thru volume. [ QSTOR-9076 ]
  • Added: the qs-ramdisk utility creates RAM-backed SCSI disks for transport and performance testing. [ QSTOR-10222 ]
  • Added: pass-through volumes can be deleted without deleting their data, and imported. [ QSTOR-11564 ]
  • Changed: storage volume assign and unassign tasks now describe what changed. [ QSTOR-11737 ]

Universal Containers

  • Added: managed Valkey, RabbitMQ and Nextcloud container services with per-service resource limits and pool-backed storage. [ QSTOR-11859 ]

Upgrade Manager and Installer

  • Added: qs-distupgrade checks the installed QuantaStor version against the repository and notes when the installed build is newer than the repository candidate. [ QSTOR-9961 ]
  • Added: qs_kernel.sh --purge-old frees space in /boot by removing kernels that are no longer needed. [ QSTOR-10176 ]
  • Fixed: the automatic support-log upload after a failed platform upgrade could hang waiting on the terminal until it timed out. [ QSTOR-11034 ]
  • Added: the Ubuntu 24.04 (Noble) ISO is now published with its own latest-download link. [ QSTOR-11935 ]
  • Added: the Ubuntu 24.04 (Noble) OVA is now published alongside the Jammy OVA. [ QSTOR-11996 ]
  • Added: the qs-apt-channel utility switches QuantaStor repository channels, with validation and automatic rollback. [ QSTOR-12013 ]
  • Fixed: the APT pin now covers every enabled QuantaStor update channel. [ QSTOR-12191 ]
  • Fixed: apt failed on Focal appliances missing the older repository signing key. [ QSTOR-12209 ]
  • Fixed: installation ISOs now include the current linux-firmware. [ QSTOR-12550 ]
  • Fixed: upgrading from 6.8.x could leave a Tomcat process running and clear the firewall and Docker network rules mid-upgrade. [ QSTOR-12617 ]
  • Fixed: the kernel and driver upgrade pass unloaded SCST before the reboot, leaving pools online but exporting no volumes. [ QSTOR-12636 ]
  • Fixed: upgrades paused for about two minutes checking for snaps. [ QSTOR-12658 ]
  • Fixed: switching repository channels could send the first upgrade pass to the Ubuntu archive; the qs-util apt channel commands now use qs-apt-channel. [ QSTOR-12809 ]
  • Fixed: a multi-node kernel or driver upgrade with automatic reboots could wait indefinitely after a node rebooted if the package index could not be read. [ QSTOR-12864 ]

Web Manager

  • Changed: the replication and snapshot schedule dialogs use the faster share/volume chooser. [ QSTOR-10330 ]
  • Added: online, offline, attach, detach and replace for ZFS pool devices in the web interface and CLI. [ QSTOR-11031 ]
  • Fixed: System Shutdown and Restart tasks never showed Completed. [ QSTOR-11190 ]
  • Changed: the Storage System "Firmware Version" field is now labeled "SCSI Target Version". [ QSTOR-11864 ]
  • Added: a warning in the Storage System Shutdown and Restart dialogs when Force is selected. [ QSTOR-11888 ]
  • Fixed: the SMTP password show/hide toggle in the Alert Manager email settings. [ QSTOR-11904 ]
  • Fixed: target ports of an offline appliance showed Normal instead of Offline. [ QSTOR-11912 ]
  • Changed: the web interface now connects through the qs-rest-soap-relay service; Tomcat is no longer required. [ QSTOR-11919 ]
  • Changed: clearer storage pool type labels in the pool grid. [ QSTOR-11942 ]
  • Fixed: wrong labels in the Mark Universal Storage Pool Hot-Spare dialog. [ QSTOR-11964 ]
  • Changed: wider Storage System, Created and IQN columns in the storage volume sessions grid. [ QSTOR-12018 ]
  • Removed: Internet Explorer 11 support from the web interface; Chrome, Firefox, Safari and current Edge are unaffected. [ QSTOR-12063 ]
  • Fixed: the hostname list in Modify Ceph Object Zone Group could not scroll to the end. [ QSTOR-12101 ]
  • Changed: Resource Group use cases are renamed General Purpose, Service Container Management and Object Storage Tenant, with General Purpose first. [ QSTOR-12281 ]
  • Added: ZFS encryption for network shares is available again in the web interface, and encrypted shares can be replicated. [ QSTOR-12301 ]
  • Dialogs that select both Storage Volumes and Network Shares now show the Network Shares tab first. [ QSTOR-12303 ]
  • Navigation stack labels such as "Hosts & Portal Groups" are no longer cropped at 125% browser zoom. [ QSTOR-12313 ]
  • Changed: darker dark-mode surfaces with better contrast. [ QSTOR-12314 ]
  • Fixed: hard-to-read Grid dashboard tile text and toolbar selection. [ QSTOR-12326 ]
  • Fixed: the enclosure diagram disappeared after zooming in the Storage Pools and Ceph OSD views. [ QSTOR-12337 ]
  • Fixed: the pool Identify action opened the wrong dialog. [ QSTOR-12367 ]
  • Fixed: Expand Storage Pool was offered on encrypted pools, and RAID10 offered an unsupported 4-way mirror. [ QSTOR-12368 ]
  • Fixed: incorrect labels and tooltips in the Storage Pool dialogs. [ QSTOR-12369 ]
  • Fixed: incorrect help text and retention tooltip in the Snapshot Schedule dialogs. [ QSTOR-12379 ]
  • Fixed: the Add/Remove Pools tooltip described pool selection incorrectly. [ QSTOR-12424 ]
  • Fixed: the Add/Remove Pools alert named the wrong object, and the Storage Tier utilization bar was wrong when a tier had no free space. [ QSTOR-12427 ]
  • Fixed: the Grid View CPU temperature indicator colours. [ QSTOR-12452 ]
  • Fixed: input validation mismatches in several dialogs. [ QSTOR-12453 ]
  • Fixed: the External Dashboards toolbar did not refresh after dashboards were added or removed. [ QSTOR-12454 ]
  • The dashboard time scale list now offers only the windows a view can plot, so the Trends views no longer show a range the chart is not using. [ QSTOR-12456 ]
  • Fixed: the Latency chart legend showed the raw field name io_time. [ QSTOR-12457 ]
  • Fixed: incorrect strings in the scale-out block dialogs. [ QSTOR-12466 ]
  • The Send Support Log Files dialog is now named consistently across the toolbar, the right-click menu and the dialog title. [ QSTOR-12502 ]
  • Fixed: the Getting Started dialog hid the Storage Grid Setup workflow from users without the Users & Groups tab. [ QSTOR-12511 ]
  • Changed: Getting Started workflow headings are now localizable. [ QSTOR-12512 ]
  • Fixed: searching for an FC WWPN in the Add Host dialog stopped all task and event updates until a page reload. [ QSTOR-12559 ]
  • Fixed: a thick border around the paged Storage Volumes, Network Shares and Physical Disks grids. [ QSTOR-12650 ]
  • Fixed: the Storage Pool menu and dialogs no longer offer Modify or Delete for scale-out object pool groups. [ QSTOR-12676 ]

Security Notes

38 security notices published since v6.8.6.015 (September 14, 2026) affect this release: 28 fixed in this release, 5 fixed by a QuantaStor security update, 5 pending a fix (12 externally-facing, 26 internally-facing). See QuantaStor Security Notices for v6.9.0.464.

v6.8.6.015 (September 14th 2026)

Upgrade Instructions

Click here for instructions on upgrading to QuantaStor v6.8.6.

Release Notes

Alerts and Configuration Analysis

  • Fixed: disk health WARNING states detected through storcli2 or SMART now raise a Disk Health alert (email/SNMP) instead of only showing in the Physical Disks view. [ QSTOR-12144 ]

Ceph Scale-out Block, Object and File

  • Fixed: Scale-out Storage Cluster creation now works on routed fabrics where the selected member ports share no common subnet. [ QSTOR-12484 ]

Enclosures and Controllers

  • Fixed: garbled or incomplete storcli output is now treated as unreliable instead of marking controllers and disks as missing. [ QSTOR-12118 ]

Network Shares

  • Fixed: HA VIF SMB authentication in Kerberos-only Active Directory environments. [ QSTOR-11685 ]

Remote Replication, Snapshots and Backup Policies

  • Fixed the replication-schedule volume picker so it no longer hides eligible volumes whose owning node changed after an HA failover. [ QSTOR-11775 ]
  • Fixed problem with backup job cancel not stopping the process. [ QSTOR-11877 ]

SCSI / NVMe Target

  • Fixed: network ports with iSCSI/NVMe-oF disabled are never exposed as allowed iSCSI portals, including after a service restart. [ QSTOR-12330 ]

Storage Pool Management

  • Fixed: the service no longer runs zpool status -v on the startup import path, so a pool with many data errors no longer blocks service startup. [ QSTOR-11654 ]
  • Fixed: the QuantaStor service starts after multipathd so pools with many multipath devices no longer start degraded at boot. [ QSTOR-12108 ]
  • Fixed: a degraded pool's missing or faulted devices now stay visible in the Storage Pool Devices view with their state instead of disappearing from the list. [ QSTOR-12109 ]

Upgrade Manager and Installer

  • Fixed: the el8 install no longer fails on the retired ipmiutil package. [ QSTOR-12257 ]
  • Fixed: ISO images now carry the Ubuntu security updates for packages that reach the ISO only as dependencies. [ QSTOR-12259 ]
  • Fixed: focal installs trust the current OSNEXUS repository signing key, so package upgrades from the public repository work. [ QSTOR-12274 ]
  • Fixed: core-only upgrades now refresh the qstorkeyring package so repository trust updates reach every upgrade path. [ QSTOR-12280 ]
  • Fixed: the install scripts trust only the current OSNEXUS repository signing keys instead of importing the published keyring wholesale. [ QSTOR-12293 ]

Web Manager

  • Fixed: logging out of the web interface as a non-default administrator or non-admin user no longer logs a false authentication failure or raises spurious 'User Authentication Failed' alerts. [ QSTOR-11701 ]

Security Notes

33 security notices published since v6.8.5.018 (August 19, 2026) affect this release: 18 fixed in this release, 12 fixed by a QuantaStor security update, 2 pending a fix, 1 pending a kernel update (18 externally-facing, 15 internally-facing). See QuantaStor Security Notices for v6.8.6.015.

v6.8.5.018 (August 19th 2026)

Upgrade Instructions

Click here for instructions on upgrading to QuantaStor v6.8.5.

Release Notes

Ceph Scale-out Block, Object and File

  • Fixed: RGW auto-tiering rules now apply to tenant-scoped buckets; the tiering script is installed for every tenant instead of only the default one. [ QSTOR-12223 ]
  • Added: auto-tiering rules can now be scoped to a tenant from the web interface and CLI - all tenants, buckets outside any tenant, or a named tenant. [ QSTOR-12225 ]
  • Changed: named-tenant matching is now exact ('sc2' no longer also matches 'sc2_prod'); no rule created in the web interface could carry a named tenant before this change, so no existing configuration is affected. [ QSTOR-12225 ]

Enclosures and Controllers

  • Fixed: Supermicro SC846 and SC847 enclosures reporting vendor SMC now match their JBOD layout profile instead of logging a layout detection failure on every discovery cycle. [ QSTOR-11947 ]
  • Fixed: disks could remain displayed under a 9600-series HBA after the attached storage was removed, because a successful-but-empty discovery result was treated as a command failure and the disk list was never refreshed. [ QSTOR-12036 ]

Network Shares

  • Fixed: Active Directory user and group lookups no longer fail intermittently where a domain controller address reverse-resolves to a name other than the controller own name. [ QSTOR-12214 ]
  • Added: a domain-join option that disables reverse DNS canonicalization and sends user and group lookups to every pinned domain controller. [ QSTOR-12214 ]
  • Fixed: an Active Directory user/group search now reports why it could not run, instead of always blaming a trusted-domain search filter. [ QSTOR-12216 ]

Service Core

  • Fixed a qs_service crash under sustained DB connection pool exhaustion on large Ceph/S3 grids by serializing and capping overflow connection creation. [ QSTOR-11580 ]
  • Fixed: a task that failed to resume after a service restart could block every other task from resuming. [ QSTOR-12218 ]
  • Fixed: the task resume limit was not enforced for some task types, so a task that could never finish was retried on every service start. [ QSTOR-12218 ]

Storage Pool Management

  • Added capability to simulate Corvault configurations in order to test pool configurations for redundancy. [ QSTOR-11945 ]

Upgrade Manager and Installer

  • Fixed: a storage system upgrade task could stop resuming after the second service restart, leaving a completed upgrade reported as stuck at 30%. [ QSTOR-12177 ]
  • Fixed: leftover upgrade progress files were never purged, so a finished upgrade could keep reporting stale progress. [ QSTOR-12219 ]
  • Fixed: 6.8.4 ISO and OVA images were missing qstortomcat, qstorrest, qstoraws and qstorbase, which left the web interface unavailable after an offline install. The images have been rebuilt. [ QSTOR-12237 ]
  • Added: an ISO build now fails if a package it declares is absent, so an incomplete image cannot ship. [ QSTOR-12237 ]

Security Notes

5 security notices published since v6.8.4.038 (August 13, 2026) affect this release: 5 fixed by a QuantaStor security update (3 externally-facing, 2 internally-facing). See QuantaStor Security Notices for v6.8.5.018.

v6.8.4.038 (August 13th 2026)

Upgrade Instructions

Click here for instructions on upgrading to QuantaStor v6.8.4.

Release Notes

Ceph Scale-out Block, Object and File

  • Fixed an issue where the Ceph Cluster Coordinator role could become stuck on one node. The automatic fallback election methods (grid-primary, site-primary, mon-rank) were not taking effect, so when no designated coordinator was set, coordinatorship never moved (e.g. after changing the grid master). Automatic coordinator election now works correctly; explicitly designated coordinators were unaffected. [ QSTOR-12194 ]

Dashboards and Analytics

  • Fixed the Ceph RGW dashboard on Ceph Tentacle so it correctly reports throughput/latency when transferring files to a bucket. [ QSTOR-11803 ]

High Availability Failover

  • Fixed the script to set the device reservation ability on WD Openflex Data24 [ QSTOR-12117 ]
  • Fixed site cluster heartbeat rings so each ring keeps its own network address and member list. Previously the rings of a multi-ring site collapsed into a single entry with no subnet shown. [ QSTOR-12159 ]

Network Shares

  • Adds an explicit domain controller to the GSSAPI ldapsearch for Active Directory user and group lookups, fixing intermittent failures on multi-controller domains. Domain joins also wait longer for a busy controller. [ QSTOR-11939 ]
  • Added a cleanup-only mode to the Active Directory leave operation that reverts the local domain configuration without contacting the domain controller, for recovering from a failed or partial leave. [ QSTOR-12058 ]
  • Fixed: SMB/DFS network share namespace referrals now advertise all of an appliance's reachable addresses rather than just one, so clients on any subnet can reach the share. [ QSTOR-12107 ]
  • Fixed per-user share permissions so an existing entry with no recorded read/write/execute setting is treated as full access rather than no access. Modifying a share no longer rewrites ACLs when no permission actually changed. [ QSTOR-12113 ]
  • Fixed Active Directory joins in SSSD-only mode against Windows Server 2025 domain controllers, which previously failed to set the machine account password. [ QSTOR-12141 ]
  • Fixed placeholder values such as None, null or undefined sent by API clients being written into the Samba configuration, which stopped Samba loading the file and took SMB access down for every share on the node. [ QSTOR-12152 ]
  • Fixed the Active Directory leave hanging when the PDC Emulator is offline. The leave now completes within a bounded timeout and reverts the local configuration. [ QSTOR-12161 ]

Security Notes

2 security notices published since v6.8.3.018 (August 6, 2026) affect this release: 1 fixed by a QuantaStor security update, 1 pending a fix (1 externally-facing, 1 internally-facing). See QuantaStor Security Notices for v6.8.4.038.

v6.8.3.018 (August 6th 2026)

Upgrade Instructions

Click here for instructions on upgrading to QuantaStor v6.8.3.

Release Notes

Ceph Scale-out Block, Object and File

  • Creating or removing a Ceph object storage class now commits the RGW period so it takes effect immediately. [ QSTOR-11938 ]
  • A failed bucket enumeration is no longer treated as an empty list, which could silently drop bucket configuration. [ QSTOR-12130 ]
  • Ceph object pool group creation now commits the RGW period, fixing persistent RGW realm/master-zone errors. [ QSTOR-12132 ]

Network Shares

  • Fixed Active Directory join failures on domains that use older Kerberos encryption methods. [ QSTOR-11646 ]
  • Changed: Active Directory joins now set 'restrict anonymous = 2' in smb.conf to block unauthenticated SID/RID enumeration. [ QSTOR-11834 ]
  • Fixed: Active Directory joins no longer fail when the computer-account OU contains a space. [ QSTOR-11895 ]
  • Fixed: Active Directory joins no longer disable SASL signing in the system-wide ldap.conf. [ QSTOR-11926 ]
  • Added a 'Skip DNS registration' option to the Active Directory join dialog, CLI and API for sites whose DNS is managed outside AD. [ QSTOR-12083 ]
  • Fixed a custom autorid Domain Range Size being discarded during an Active Directory join. [ QSTOR-12089 ]
  • The Active Directory KDC field now accepts a comma-separated list of domain controllers for Kerberos failover. [ QSTOR-12091 ]
  • Active Directory joins in SSSD modes no longer force user/group enumeration, which could stall startup on large domains. [ QSTOR-12092 ]
  • Fixed: Active Directory joins now send the machine-account password update to the PDC Emulator, fixing 'Message stream modified' failures. [ QSTOR-12136 ]
  • Fixed: leaving an Active Directory domain now updates the web UI immediately instead of still showing the old domain. [ QSTOR-12153 ]
  • Changed: the Active Directory join dialog now labels its two ID-range sections distinctly so it's clear which is being edited. [ QSTOR-12154 ]

Service Core

  • Memory optimization for grid event handling. [ QSTOR-12112 ]

Upgrade Manager and Installer

  • The upgrade system now fetches and verifies the latest OSNEXUS package signing key before applying updates. [ QSTOR-9551 ]
  • Fixed EL8 upgrades pinning a stale awscli/qstoraws package version from the RedHat repository. [ QSTOR-11991 ]
  • In-place Ceph upgrades now install the shipped Ceph 20.2.2 release instead of an older pinned version. [ QSTOR-11998 ]
  • Fixed a grafana-enterprise package upgrade failure that could leave dpkg in a held state during upgrades from 6.8.1. [ QSTOR-12075 ]
  • Updated the Ubuntu 24.04 upgrade configuration to the shipped kernel and Ceph 20.2.2 versions. [ QSTOR-12077 ]

Security Notes

6 security notices published since v6.8.2.002 (July 24, 2026) affect this release: 4 fixed in this release, 1 pending a fix, 1 pending a kernel update (4 externally-facing, 2 internally-facing). See QuantaStor Security Notices for v6.8.3.018.

v6.8.2.002 (July 24th 2026)

Upgrade Instructions

Click here for instructions on upgrading to QuantaStor v6.8.2.

Release Notes

Network Shares

  • Fixed: AD groups could not be added to a Network Share ACL in Winbind+SSSD mode (group@DOMAIN form could not be resolved). [ QSTOR-12025 ]


Security Notes

17 security notices published since v6.8.1.007 (July 18, 2026) affect this release: 7 fixed in this release, 8 fixed by a QuantaStor security update, 2 pending a fix (4 externally-facing, 13 internally-facing). See QuantaStor Security Notices for v6.8.2.002.

v6.8.1.007 (July 18th 2026)

Upgrade Instructions

Click here for instructions on upgrading to QuantaStor v6.8.1.

Release Notes

Upgrade Manager and Installer

  • Fixed: platform upgrades remove the obsolete linux-tools-common package that could trigger security alerts. [ QSTOR-10314 ]
  • Changed: qs-distupgrade output is timestamped and includes a pre-upgrade configuration report. [ QSTOR-11632 ]
  • Added: platform distribution upgrade (qs-distupgrade) from Ubuntu 22.04 to 24.04. [ QSTOR-11651 ]
  • Added: non-interactive flags for qs-distupgrade enabling fully unattended platform upgrades with automatic reboot. Use the qs-distupgrade --help to review the available usage options. [ QSTOR-11918 ]
  • Fixed: platform distribution upgrades keep Ceph pinned at its current version. [ QSTOR-11955 ]
  • Added: qs-distupgrade requires all Ceph nodes on the latest offered Ceph version (--skip-check-ceph-latest to override). [ QSTOR-11958 ]
  • Fixed: coordinated Ceph upgrades restart all RGW daemons on hosts running multiple RGW services. [ QSTOR-11983 ]
  • Fixed: a 6.8.0-only issue where service-driven package upgrades reported success without installing anything. [ QSTOR-11992 ]




Security Notes

11 security notices published since v6.8.0.205 (July 8, 2026) affect this release: 6 fixed in this release, 5 fixed by a QuantaStor security update (3 externally-facing, 8 internally-facing). See QuantaStor Security Notices for v6.8.1.007.

v6.8.0.205 (July 8th 2026)

Upgrade Instructions

Click here for instructions on upgrading to QuantaStor v6.8.0.

Release Notes

Alerts and Configuration Analysis

  • Added alert webhook support for Google Chat. [ QSTOR-9793 ]
  • Allow users to have a subset of alert subscriptions. [ QSTOR-11683 ]

Ceph Scale-out Block, Object and File

  • Added an 'Enable Versioning' checkbox to the Create Bucket dialog (automatically enabled when object locking or governance/compliance is selected); versioning can also be enabled on existing buckets. [ QSTOR-10937 ]
  • Added Ceph Tentacle 20.2.2 support to the Jammy QuantaStor ISO and package mirror. [ QSTOR-11441 ]
  • QuantaStor 6.8 ships Ceph 20.2.2 (Tentacle), which includes the upstream MDS fix (tracker #76031) for the SIGABRT/crash on client eviction caused by a null MDRequestRef under sustained metadata contention. [ QSTOR-11504 ]
  • The Ceph Tentacle 20.2.2 release resolves frequent radosgw (RGW) crashes related to Kafka bucket notifications. [ QSTOR-11687 ]
  • Fix ceph bucket delete with large number of objects timing out. [ QSTOR-11728 ]
  • Removed: the deprecated S3 bucket orphan-object cleanup feature; any existing scheduled task is disabled automatically on upgrade. [ QSTOR-11729 ]
  • Fixed a regression where deleting multiple Ceph (RBD) volumes at once on a multi-node cluster would fail after the first volume. [ QSTOR-11756 ]
  • Added support for major-version Ceph upgrades (through Tentacle 20.2.x) in the upgrade script. [ QSTOR-11762 ]
  • Increase the timeout for "Add Node" to a ceph cluster [ QSTOR-11906 ]

Dashboards and Analytics

  • Added: a 'qs-statsdb resetpassword' command to rotate the InfluxDB stats password; telegraf is updated in lockstep so dashboards keep working. [ QSTOR-11170 ]
  • Rebuilt bundled telegraf with its vendored rclone library updated to 1.74.3, clearing CVE-2026-41176 and CVE-2026-41179. [ QSTOR-11771 ]

Enclosures and Controllers

  • Fixed issue with "disappearing" enclosures [ QSTOR-11676 ]
  • Added support for the Supermicro SSG-222B-NE3X24R all-NVMe server, including hardware enclosure auto-detection, enclosure layout and diagram, and NVMe drive slot mapping in the QuantaStor web management interface. [ QSTOR-11712 ]

High Availability Failover

  • Add logging for manually run iofence commands [ QSTOR-11751 ]
  • Fixed HA pool failover persisting a stale size=0 / isMounted=false when the pool's datasets were still mounting during fast-import; the last-known-good size and mount state are now preserved (and the corrected record wins via a bumped modified timestamp). [ QSTOR-11818 ]
  • Fixed: Storage Pool HA io-fencing and failover now work over NVMe-TCP; target namespaces advertise persistent reservations. [ QSTOR-11850 ]

Kernel and Drivers

  • Updated Jammy platform Kernel to 6.8.0-90-generic [ QSTOR-10903 ]
  • Updated Jammy platform ZFS driver to 2.3.5 [ QSTOR-10903 ]
  • Updated Jammy platform SCST driver to 3.10 [ QSTOR-10903 ]
  • Updated Jammy platform mpi3mr driver to 8.15.1.0.0 [ QSTOR-10903 ]
  • Updated the Mellanox OFED driver installer for current Ubuntu 22.04 (Jammy) kernels, fixing driver installation failures on recent kernels. [ QSTOR-11709 ]

Multitenancy

  • Added RBD namespace support, allowing multiple tenants to share a single Ceph block pool with isolated volumes. [ QSTOR-11650 ]

NAS Gateway / Cloud Containers

  • Add a fix for Samba access to Cloud Container shares. [ QSTOR-11763 ]
  • Fixed: cloud containers are now accessible over SMB, not just NFS. [ QSTOR-11824 ]
  • Updated the bundled AWS CLI to version 2.35.6. [ QSTOR-11827 ]

Network Interfaces

  • Added DOCA OFED install script for jammy and upcoming noble platforms as an optional install for latest hardware. [ QSTOR-11069 ]
  • Fixed the Network Interface Rename feature on systems upgraded from older releases where the 'ip' command resides in a different path. [ QSTOR-11614 ]
  • Fixed: converting a local VIF to an HA VIF now preserves the original local interface if the conversion fails, so client connectivity isn't lost. [ QSTOR-11706 ]

Network Shares

  • Add the ability to specify per user or group permissions on Network Shares during create or modify [ QSTOR-10662 ]
  • Fixed: intermittent 'NFS server not responding' stalls under load by raising the nfsd listen backlog from 64 to 4096. [ QSTOR-10872 ]
  • Fixed: NFS client entries can now be added or removed on a share while a long-running replication or snapshot task is using it, instead of queuing. [ QSTOR-11571 ]
  • Consolidated the Network Share create/modify dialog's Permission Settings into the File Masks tab — now a single 'File Masks & Permission Settings' tab containing Owner Permission Settings plus the Directory and File Create Permissions Masks. [ QSTOR-11625 ]
  • Reduced excessive event logging (event spam) for network shares and related grid objects. [ QSTOR-11695 ]
  • Fixed handling of CIFS share options so empty/null option values are no longer written to the Samba configuration. [ QSTOR-11731 ]
  • Fixed an issue where an Active Directory group added to a share's permissions was not preserved, and excluded built-in/default AD groups from the group picker. [ QSTOR-11767 ]

Remote Replication, Snapshots and Backup Policies

  • Copy source Network Share settings to the destination share after replication. [ QSTOR-5738 ]
  • Add support for rollback of Storage Volumes and Network Shares for a replication schedule [ QSTOR-6227 ]
  • Minor updates to the auto snapshot cleanup tasks for replication schedules. [ QSTOR-11622 ]
  • Fix auto create of replication association after failover [ QSTOR-11700 ]
  • Snapshot schedule now shows the state detail when schedule is disabled by user. [ QSTOR-11717 ]
  • The Snapshot Schedule properties page now displays Retention Tags. [ QSTOR-11719 ]
  • Changed: Auto-tier backup policies now display as 'Auto-Tier >> Outbound' instead of 'Move >> Outbound'. [ QSTOR-11764 ]
  • Fixed the CLI replication-schedule rollback so volume and share names are accepted (not just IDs), and rolling back only volumes (or only shares) no longer also rolls back the other type. [ QSTOR-11814 ]

SCSI / NVMe Target

  • Added: a 'Select Initiator...' picker in the Add Host dialog to choose a discovered FC remote initiator WWPN instead of typing it. [ QSTOR-10741 ]
  • Renamed the sys-list 'Firmware Version' column to 'SCSI Target Version' and corrected the value to show the actual SCST target-driver version (e.g. scst-3.10.0.qs01-...) instead of the literal 'scst-SCST'. [ QSTOR-11854 ]

Security

  • Added support for Okta multi-factor authentication. [ QSTOR-9399 ]
  • Added Multi-Admin Approval support, allowing deletion of pools, buckets, shares, and volumes to require approval from a configurable number of administrators. [ QSTOR-11344 ]
  • Fixed certificate update failures when using a certificate template, and ensured dependent services (such as HAProxy and RGW) are restarted after a certificate replacement. [ QSTOR-11678 ]
  • Fixed an issue in the Security Manager dialog where it was showing the "password policy change" warning confirmation when no fields were changed. [ QSTOR-11708 ]
  • InfluxDB (port 8086) now requires authentication and binds to localhost by default; remote access is opt-in via the tf_influxdb_remote_access.enable touchfile (authentication still enforced). [ QSTOR-11759 ]
  • Added the Ubuntu security apt repositories to the default package sources and removed unused bundled components flagged by scanning (Chronograf, the LXD/core20/snapd snaps, the docker-scan plugin), clearing CVE-2024-41110, CVE-2026-34177/-34178/-34179, CVE-2020-14343, CVE-2025-68121, and CVE-2024-45337. [ QSTOR-11760 ]
  • Rebuilt the bundled QuantaStor Go tools (qs_iofence, qs_pool_export_helper, qs_diskinfo) and s5cmd with a current Go toolchain, clearing CVE-2025-68121, CVE-2024-45337, CVE-2024-24790, CVE-2023-24540, and CVE-2023-24538. [ QSTOR-11761 ]
  • Hardened the internal QuantaStor script service (scriptsvc): removed a command-injection vector in request handling and now enforce the service's authorization check on every call. Addresses ZDI-CAN-30036 [ QSTOR-11799 ]
  • Made a number of usability and reliability improvements to the multi-admin delete-approval workflow. [ QSTOR-11804 ]

Service Core

  • Fix tag-set where custom key/value tags were not appearing for User objects. [ QSTOR-11528 ]
  • Improved Ceph OSD daemon restart handling during upgrades and reduced database load on large-scale clusters. [ QSTOR-11675 ]
  • Fixed an issue with QuantaStor management service memory usage when a grid node was offline. [ QSTOR-11693 ]
  • Improved crash handling and diagnostic tracing for coordinated tasks, during operations such as adding a Ceph RADOS Gateway across multiple nodes. [ QSTOR-11702 ]
  • Improved logging and error checking for QuantaStor configuration database backups, including capturing error output when a backup fails. [ QSTOR-11742 ]
  • Expanded diagnostic log collection to capture additional network routing details (ip route output and static-route configuration). [ QSTOR-11748 ]
  • Fixed the Sessions view showing stale SMB/NFS client sessions that lingered after a reboot; the share session monitor now forces a full re-sync on its first poll after startup so sessions left over from before the reboot are cleared. [ QSTOR-11757 ]
  • Fixed a self-sustaining grid event flood triggered when creating CephFS/CIFS network shares at scale: nodes no longer re-cache remote-origin (sync-applied) events, and CIFS options are diff-merged to secondaries, eliminating the event resync cascade. [ QSTOR-11785 ]
  • qs-sendlogs now writes a qs_logs.runtime.info file recording the options and variables used during log collection, and reliably scrubs sensitive data from the collected database. [ QSTOR-11897 ]

Storage Pool Management

  • Added automated ordered-disk-list pool creation for Seagate Corvault and WD Data24 systems, simplifying creation of fully redundant storage pools. [ QSTOR-11538 ]
  • Fixed software-encrypted pool creation so a disk block-size mismatch is detected before disks are encrypted, avoiding leftover encryption mappings. [ QSTOR-11599 ]
  • ZFS deduplication now uses the faster fast_dedup mode by default, improving sustained deduplication performance. [ QSTOR-11714 ]
  • When a LUKS-encrypted disk member of a pool momentarily goes offline and the hot-spare swap-in completes, if the "bad" disk in question has in the meantime come back online, its iofence status, encryption status and its related properties in its respective disk object are cleared up, making the disk available for use again. [ QSTOR-11738 ]
  • Resolved a boot-time race where the OS-level zfs-import-cache.service could import ZFS pools before qs_service started. QuantaStor now imports pools with cachefile=none, masks the zfs-import-cache and zfs-import-scan services on install and upgrade, and clears the stale global ZFS cache file at boot, ensuring QuantaStor remains the sole coordinator of pool imports. [ QSTOR-11752 ]
  • Add the ability to create a Storage Pool checkpoint for scale-up pools [ QSTOR-11784 ]
  • Added a support-only, touchfile-gated pool-export triage call-out (qs_pool_export_triage.sh) that gathers diagnostics when a share or volume is still open during a storage pool export. Off by default (enabled via the tf_pool_export_triage.enable touchfile). [ QSTOR-11807 ]
  • Resolved issue preventing HA failover functionality using SED drives. [ QSTOR-11832 ]

Upgrade Manager and Installer

  • Added retry logic with a timeout to the Ceph upgrade script's daemon restarts so transient restart failures no longer abort the upgrade. [ QSTOR-10598 ]
  • Fixed focal-to-jammy distribution upgrades leaving the HA cluster service (pcsd/pacemaker) inoperative due to a missing ruby-webrick dependency on Ruby 3.0+. The upgrade now installs ruby-webrick so HA failover keeps working. [ QSTOR-11841 ]
  • Fixed focal-to-jammy distribution upgrades that could abort and roll back when Ubuntu's unattended-upgrades/apt-daily held the apt lock or needrestart blocked on a prompt. QuantaStor now disables automatic apt upgrades and runs the distribution upgrade non-interactively. [ QSTOR-11874 ]
  • Fixed a Noble (24.04) upgrade failure where qs-upgrade aborted because the dpkg package version string could not be parsed. QuantaStor now compares Debian package versions using dpkg's native version ordering. [ QSTOR-11881 ]

Web Manager

  • Minor fix to the "Copy to Clipboard" for task descriptions [ QSTOR-9574 ]
  • Added a method field and a sortable timestamp column to the web interface Audit Log Analyzer. [ QSTOR-11191 ]
  • Updated web interface translations across the major supported languages. [ QSTOR-11585 ]
  • Added a 'Create Share' option to the share template menu to quickly create a share applying all of a template's settings. [ QSTOR-11595 ]
  • Fixed the web interface to display all configured Ceph MDS daemons instead of limiting the list to five. [ QSTOR-11615 ]
  • Add auto select convenience buttons to the Storage Volume multi-delete dialog. [ QSTOR-11707 ]


Security Notes

12 security notices published since v6.7.6.001 (June 25, 2026) affect this release: 3 fixed in this release, 9 fixed by a QuantaStor security update (3 externally-facing, 9 internally-facing). See QuantaStor Security Notices for v6.8.0.205.

Archived Change Logs

Change Log Archive 2026

Change Log Archive 2025

Change Log Archive 2024

Change Log Archive 2023

Change Log Archive 2022

Change Log Archive 2021

Change Log Archive 2020

Change Log Archive 2019

Change Log Archive 2018

Change Log Archive pre-2018

Select the link above to see the Change Log Archive of older revisions.