IO Performance Tuning

From OSNEXUS Online Documentation Site
Revision as of 09:44, 2 May 2014 by Qadmin (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Storage Pool IO Tuning Overview

Storage pools in QuantaStor have associated IO profiles which control parameters like read-ahead, request queue depth, and the IO scheduler. QuantaStor comes with a number of IO profiles to match common workloads but it is possible to create your own IO profiles to tune for a specific application. In general, we recommend going with one of the defaults but for performance tuning purposes you can add additional profiles to the /etc/qs_io_profiles.conf file. Here are the IO profiles for the default and default SSD configurations.

description=Optimizes for general purpose server application workloads

name=Default SSD
description=Optimizes for pure SSD based storage pools for all workloads

If you create a new profile, make sure that you put a unique name/ID for your profile in the square brackets, and that you set a friendly name and description for your profile. For example, your new profile might look like this:

name=SQL DB Performance
description=Optimizes for Acme Corp relational databases.

Profile Name & Description

The name and description fields will show up in the QuantaStor web interface so be sure to make these unique.

Profile Disk I/O Queue Depth (nr_requests)

The nr_requests represents the IO queue size. This is an important variable to change on the host/initiator side as well if you're connecting to your QuantaStor appliance via iSCSI from a Linux based server. In QuantaStor when you set the nr_requests the core service applies this setting to all disks in the pool by adjusting parameters in /sys/block/ part of the sys filesystem.

Profile Read-Ahead

The read_ahead_kb represents the amount of additional data that should be read after fulfilling a given read request. For example, if there's a read-request for 4KB and the read_ahead_kb is set to 64, then an additional 64KB will be read into the cache after the base 4KB request has been met. Why read this additional data? It counteracts the rotational latency problems inherent in spinning disk / hard disk drives. A 7200 RPM hard drive rotates 120 times per second, or roughly once every 8ms. That may sound fast, but take an example where you're reading records from a database and only gathering 4KB with each IO read request (one read per rotation). Done serially that would produce a throughput of a mere 480K/sec. This is why read-ahead and request queue depth are so important to getting good performance with spinning disk. With SSD, there are no mechanical rotational latency issues so the SSD profile uses a small 4k read-ahead.

Profile Chunk Size

This parameter only applies to XFS based storage pools. QuantaStor layers XFS storage pools over MDADM based software RAID and the chunk_size_kb is the chunk size used for the underlying md software RAID array that is created.

Profile IO Scheduler

The IO scheduler represents the elevator algorithm used for scheduling I/O operations. For storage applications the two best schedulers are the 'deadline' and the 'noop' scheduler. We find that deadline is best for HDDs and that the noop scheduler is best for SSDs. The fifo_batch setting is related to the use of the 'deadline' scheduler. More information can be found here.

SSD Tuning

The Default SSD tuning profile was produced after extensive testing with enterprise STEC 2TB SAS SSD drives connected to an LSI HBA. Here is some of the detail from the performance testing using iozone. Note that the Default SSD storage pool IO profile uses a small read-ahead of just 4k. This was the most important factor in the tuning for SSD drives. A 0KB read-ahead and larger read-ahead values seemed to create performance holes for small 4k and 8k block sizes which were eliminated with the 4KB read-ahead. Note that the flat area in the graphs on the front-right side are set to zero because that's a section where tests were not run either due to the transfer size being larger than the file size or the transfer size being so small vs the file size that it would not produce additional valuable numbers. Testing was done using standard iozone parameters with an increased 2G file size (iozone -a -g 2g -b output.xls), numbers with a 8GB file size were very similar.

Qs zfs ssd read.png

Qs zfs ssd write.png

iSCSI Performance Tuning Overview

Getting the network configuration setup right is an important factor in getting good performance from your system. Improper LACP configuration, multi-pathing and many other components must be properly configured for optimal performance. The following guide goes over a simple setup with Windows Server 2008 R2 but is great at illustrating the large differences small configuration changes can make in boosting IO performance. In the following sections I'll be going over three major topics:

  • Multi-path IO configuration and performance results
  • LACP configuration and performance results
  • Jumbo frames configuration and performance results

Test Setup

This testing was done with the following setup:

Windows 2008 R2 host

  • four 10GbE ports

QuantaStor Storage Appliance

  • four 10GbE ports
  • LSI 9750-8i Controller
  • 24x 360GB 2.5" drives
  • RAID0

Within QuantaStor I also created a storage pool and a volume (thick provisioned). I then assigned it to the Windows host.

Microsoft MPIO

MPIO (multi-path IO) is when there are multiple paths (iSCSI sessions) between the devices which are combined into one. MPIO increases performance and fault-tolerance as paths can be lost without interrupting access to the storage. Performance is increased by using a the basic round-robin technique so that the sessions evenly share the IO load.

Our setup was tested first with a direct connection from the Windows host to the QuantaStor system, and then was tested again with a 10GbE switch in between (Interface Masters Niagara).

QuantaStor System Network Setup

To setup QuantaStor for use with MPIO we first need to assign each network port to its own subnet. To do this navigate to the Storage System section within QuantaStor Manager. Next, select the "Network Ports" tab, then right-click on one of the ports you will be using for iSCSI connectivity to the Windows host. Select "Modify Network Port", and configure the port to use a static IP address on its own network. Make sure to do this for every network port, putting them all on the different networks. (Ex:,, etc). Having the ports on separate networks is important. When ports are on the same network any port can respond to a request on any other port and this will cause performance issues.

Windows MPIO Setup

Now we can begin to setup Windows to use MPIO. The first step is to navigate to MPIO properties. The easiest way to do this is to type MPIO in the start menu search bar. It can also be found in the control panel under "MPIO". In the "MPIO Devices" tab click the "Add" button. The string you will want to add for QuantaStor is "OSNEXUS QUANTASTOR      "

The string you will want to add for QuantaStor is "OSNEXUS QUANTASTOR      ".

This is all capital letters, with one space between the words, and six trailing spaces after QuantaStor. If you don't have exactly (6) trailing spaces then the MPIO driver won't recognize the QuantaStor devices and you'll end up with multiple instances of the same disk in Windows Disk Manager. Now that MPIO is enabled for Quantastor we have to configure the network connections. Navigate to Control Panel --> Network and Internet --> Network Connections. For each connection that will connect to Quantastor assign it a static IP address, on a matching network as one from the Quantastor box. For our setup we did as follows:

Windows Network Port Configuration

  • /
  • /
  • /
  • /

QuantaStor Network Port (Target Port) Configuration

  • /
  • /
  • /
  • /

There is no need to set the gateway for these ports as they are not going over the internet. We had a separate network that was used for that with iSCSI disabled.

If the boxes are directly connected you have to make sure that the paired ports are setup using the same network (you should be able to ping all Quantastor ports from Windows).

Configuring the Windows iSCSI Initiator

Now that all the network connections are configured, select "iSCSI Initiator" in the control panel, you can also access it by typing iSCSI into the Windows search bar in the Start menu. Once you have the iSCSI Initiator configuration tool loaded select the Targets tab and type in the IP address of one of the network ports on the QuantaStor system. After it is connected, select the connection and click on properties. From here we can add all the additional sessions by clicking on "Add Session" and then linking the other network ports on the Windows host to their matching network ports on the same subnet on the QuantaStor System. After clicking on add session, check the box that enables multi-path, and click on the "Advanced" button. We now want to set the local adapter to "Microsoft iSCSI Initiator", the initiator ip as the ip of the Windows port that is to be added, and the target portal ip as the matching network port on the Quantastor box. Click "Ok" on both windows. We will want to add a session for every other port on the Windows box that will be used. In the properties window we should now see multiple sessions. The last step is to click "MCS" at the bottom the the properties window. Make sure the MCS policy is set to "Round Robin" and click "Ok" on all the open windows. Everything should now be setup for MPIO. If you really want to make sure all the sessions are connected to the disk you can open "Disk Management", right click on the disk section (to the left of the blue bar) and view its properties. Under the MPIO tab there should be a session for every iSCSI session you added. For example, if you have 4 network ports on your Windows host then you should have 4 iSCSI sessions which will produce 4 paths, hence MPIO should show 4 paths in the properties page for your QuantaStor disk.

iSCSI Session Creation for MPIO

Below are some screenshots during the process of setting up LACP in Windows.

Iscsi.png Iscsi quick connect.png Iscsi properties.png Iscsi advanced settings.png Iscsi mcs.png Multi path disk.png

Click on the images to enlarge


Below are some of the IO performance results. The first two images are when the Windows box was directly connected to the Quantastor box, where as the next two images are when a switch was used between the boxes.

Performance mpio direct.png Performance mpio direct 2gblength.png Performance mpio direct switch.png Performance mpio direct 2gblength switch.png

Click on the images to enlarge

Link Aggregation Control Protocol (LACP)

LACP (link aggregation control protocol) involves bonding ports to act as a single network connection via a shared MAC address. Instead of having to split the traffic across multiple networks, setting up LACP allows for the ports to be viewed as one large port. This also means that if one of the connects fails, the LACP will still be able to function (just at reduced performance). It is an alternative approach which doesn't depend on MPIO but you can bond groups of ports together and use both technologies if you wish.

For our setup the four network connections on the Windows side were all bonded together, and the four network connections on the Quantastor side were all bonded together. They were then connected to each other through our switch. In this configuration MPIO sees only one path as there is only one iSCSI session.


Setting up LACP on the Quantastor side is very simple. First create a bonded group of Ethernet ports. This can be done by first navigating to the "Network Ports" tab under the "Storage System" section. Right click in the empty space under the network ports and select "Create Bonded Port". Assign the port the desired IP address and select the ports to be bonded. In our setup we bonded all four ports together. The last step is to right click on the storage system and select "Modify Storage System". At the very bottom under "Network Bonding Policy", select LACP. Everything is now setup for LACP on the Quantastor side.

Setting up LACP on the Windows side requires a little bit more effort. Navigate to Control Panel --> Network and Internet --> Network Connections. On one of the network connections, right click and select "Properties". In the properties window select "Configure". In the "Teaming" tab check the box "Team this adapter with other adapters" and click "New Team". Provide a name for the team, and then select the network connections that are to be bonded together. For team type choose "IEEE 802.3ad Dynamic Link Aggregation". The next step is to choose the profile to apply to the team. My setup used the "Standard Server" option. Now that your team is configured select it from the list of network connections and assign an IP address.

The last step is to configure your switch to used LACP. Being that this will be different from switch to switch you will have to check your user manual on how to configure LACP.

Below are some screenshots during the process of setting up LACP in Windows.

LACP LANSettings.png LACP LANProperties.png LACP Configure.png LACP IEEE.png LACP Profile.png

Click on the images to enlarge

Cautions with LACP

Be careful if you decide to use LACP. I would highly recommend first trying the MPIO setup like talked about above. After doing a performance run of MPIO, setup LACP and run the performance tests again. Doing this will allow you to have a target IO performance mark to try and meet. With our testing LACP seemed to be very sensitive to different filtering techniques that were allowed by the switch. Turning LACP on while leaving all of the default settings resulted in a large drop in IO performance. This will be different from switch to switch but a drop in performance by 80% (roughly what we saw) was discomforting. After some tweaking of the settings in the switch the performance became closer to what was seen with MPIO.


The picture on the left was when LACP was setup with the default settings in the switch we were using. As you can see the performance suffered greatly. On the right is what the results looked like after some tweaking of the settings in the switch. As you can see, with just some minor tweaking large performance differences can occur. Note the change in scale from the picture on the left to the picture on the right.

Performance lacp default settings.png Performance lacp tweaked settings.png

Click on the images to enlarge

Jumbo Frames

Jumbo frames depending on the setup can have a large impact on the IO performance. Jumbo frames sends larger sized packets, allowing for larger Ethernet payloads. This lets more data be sent with each packet and in most cases results in better performance.

For our setup I first configured everything as I did with MPIO using a direct connection between the Windows box and the Quantastor box. I then went and changed all the settings as specified below.


To setup Quantastor to use jumbo frames first navigate to the storage system section. Then under the "Network Ports" tab, right click on the port in which you would like to configure to use jumbo frames. Select "Modify Network Port" from the context menu. Now set the MTU as 9000. Complete this for every port you plan on using jumbo frames with.

To setup Windows to use jumbo frames first navigate to Control Panel --> Network and Internet --> Network Connections. On one of the network connections, right click and select "Properties". In the properties window select "Configure". From here under the advanced tab there should be an option for jumbo packets. Select this and change its value to 9000. Complete this for every port you plan on using jumbo frames with.

You may also have to go into your switch and enable jumbo frames as well. This will vary from switch to switch.

Cautions with Jumbo Frames

For jumbo frames to work the MTU must be set as the same for all devices (all the connected machines and switches). If the packet is not recognized by a device, the packet can be dropped. This is just one example of an issue with jumbo frames. When we tried configuring our setup to go through a switch we encountered issues such as this.


As you can see below jumbo frames had the best results out of what we tested. The read IO speeds was the largest by far of all of our testing, and the write IO performed very strongly as well.

Performance direct jumbo 2gb.png Performance direct jumbo.png

Click on the images to enlarge