Template:SetupStep Warning Before Creating OSDs Journals: Difference between revisions

From OSNEXUS Online Documentation Site
Jump to navigation Jump to search
VisualWikitext
Created page with "== Note before Creating the OSDs and Journals == The Object Storage Daemons (OSDs) store data, while the Journals accelerate write performance as all writes flow to the journ..."
 
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
== Note before Creating the OSDs and Journals ==
== Note Before Creating OSDs and Ceph Journals ==


The Object Storage Daemons (OSDs) store data, while the Journals accelerate write performance as all writes flow to the journal and are complete from the client perspective once the journal write is complete.  A quick review of OSD and Journal requirements in a QuantaStor/Ceph Scale-out Block and Object configuration:
The Object Storage Daemons (OSDs) store data, while the Journals accelerate write performance as all writes flow to the journal and are complete from the client perspective once the journal write is complete.  A quick review of OSD and Journal requirements in a QuantaStor/Ceph Scale-out Block and Object configuration:


* QuanaStor maps OSDs to XFS Storage Pools on a one-to-one basis
* Each system should have 5x HDDs (or SSDs) for data devices to satisfy minimum Placement Group redundancy requirements
* Journals map to a partition on a ''Physical Device'' like a SSD or [http://www.nvmexpress.org/ NVMe] device
* Each system should have 1x or more journal devices (NVMe/Optane preferred)
* Each appliance should have at least 3 Storage Pools/OSDs to satisfy minimum Placement Group redundancy requirements, with between 3x to 25x OSD per Appliance (15x to 125x disks in RAID5 units)
* 1x SSD Journal device is needed for every 8x OSDs (with 4x OSDs per Journal the optimal maximum)


[[File:qs4_ceph_osd_journal_map.png|800px]]
<br><br>
 
While stand-alone SSD devices can be used as Journal Devices, in practice it's better to use hardware RAID to protect and accelerate the journal device.  Using RAID1 with two SSDs will make it easy to maintain with no downtime for the node.  Going further, using RAID5 will boost performance and provide fault tolerance for a relatively small increase in hardware cost for a large boost in write performance.
 
[[File:qs4_ceph_journal_types.png|600px]]

Latest revision as of 18:35, 12 February 2020

Note Before Creating OSDs and Ceph Journals

The Object Storage Daemons (OSDs) store data, while the Journals accelerate write performance as all writes flow to the journal and are complete from the client perspective once the journal write is complete. A quick review of OSD and Journal requirements in a QuantaStor/Ceph Scale-out Block and Object configuration:

  • Each system should have 5x HDDs (or SSDs) for data devices to satisfy minimum Placement Group redundancy requirements
  • Each system should have 1x or more journal devices (NVMe/Optane preferred)



Retrieved from "https://wiki.osnexus.com/index.php?title=Template:SetupStep_Warning_Before_Creating_OSDs_Journals&oldid=17653"