- 4. IBM Cloud Scale-out NAS Archive Storage
Reference Configurations
Scale-out NAS Archive Storage
| Medium Tier - NAS Archive Storage – 48TB | Use Cases | System View |
| 2x E5-2620v4 128GB RAM 8x 6TB QS Medium Tier License 2x 960GB SSDs (write log) 2x 1TB SATA (mirrored boot) 2x 10GbE Private Network ports |
Highly-available block storage for virtualization (VMware, Hyper-V, XenServer) Scale-out block storage with Cinder integration for KVM based OpenStack deployments Highly-available block storage for databases |
 |
| Large Tier - NAS Archive Storage – 128TB | Use Cases | System View |
| 2x E5-2650v4 128GB RAM 16x 8TB QS Large Tier License 2x 960GB SSDs (write log) 2x 1TB SATA (mirrored boot) 2x 10GbE Private Network ports |
Highly-available block storage for virtualization (VMware, Hyper-V, XenServer) Scale-out block storage with Cinder integration for KVM based OpenStack deployments Highly-available block storage for databases |
 |
| Extra-large Tier - NAS Archive Storage – 256TB | Use Cases | System View |
| 2x E5-2650v4 256GB RAM 32x 8TB QS XL Tier License 2x 960GB SSDs (write log) 2x 1TB SATA (mirrored boot) 2x 10GbE Private Network ports |
Highly-available block storage for virtualization (VMware, Hyper-V, XenServer) Scale-out block storage with Cinder integration for KVM based OpenStack deployments Highly-available block storage for databases |
|
Quick Configuration Steps
Step One: Storage Management Tab → Create Grid → Click OK
Step Two: Storage Management Tab → Add Grid Node → Enter 2nd Appliance IP → Click OK
Step Three: Storage Management Tab → Add Grid Node → Enter 3nd Appliance IP → Click OK
Step Four: Storage Management Tab → Controllers & Enclosures → right-click Controller → Configure Pass-thru devices → Select all → Click OK (do this for each controller on each appliance)
Step Five: Cluster Resource Management → Create Site Cluster → Select All → Click OK
Step Six: Cluster Resource Management → Add Site Interface → Enter IP address for SMB/NFS Access → Click OK
Step Seven: Storage Management Tab → Storage Pool → Create Storage Pool → Create one pool (XFS type) per device per appliance
Step Eight: Scale-out File Storage Tab → Gluster Volumes → Peer Setup → Select all appliances → Click OK
Step Nine: Scale-out File Storage Tab → Gluster Volumes → Create Volume → Enter name, select all Pools and Erasure Coding mode → Click OK
Step Ten: Storage Management Tab → Network Shares → right-click share for volume → Select Modify Share & SMB Access → Adjust access settings → Click OK