Difference between revisions of "Changing Network Bonding Mode"
From OSNEXUS Online Documentation Site
m |
m |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | Changing the Network Bonding Mode | + | Changing the Network Bonding Mode is done using the Modify Storage System dialog in the web management interface. |
| + | |||
| + | If for some reason you need to use a custom bonding mode that is not available in the web management interface or are using an older version of QuantaStor (v2) you can manually edit Linux configuration files to set the bonding mode. Note that this change will require a momentary interrupt in connectivity to an active bonded interface. If you have NFS or iSCSI connections currently accessing the bonded interface you wish to change you should schedule a maintenance window and disconnect the clients prior to making the changes. | ||
'''Enable LACP 802.3ad Dynamic link aggregation''' | '''Enable LACP 802.3ad Dynamic link aggregation''' | ||
| Line 11: | Line 13: | ||
# Restart the bonding driver | # Restart the bonding driver | ||
#: modprobe bonding | #: modprobe bonding | ||
| − | # Create a new bonded port in the QuantaStor Manager | + | # Create a new [[QuantaStor_Administrators_Guide#NIC_Bonding_.2F_Trunking | bonded port]] in the QuantaStor Manager |
| + | |||
| + | ''Back to [[QuantaStor_Administrators_Guide | QuantaStor Administrators Guide]]'' | ||
| − | + | [[Category:QuantaStor_Guide]] | |
Latest revision as of 15:47, 7 April 2016
Changing the Network Bonding Mode is done using the Modify Storage System dialog in the web management interface.
If for some reason you need to use a custom bonding mode that is not available in the web management interface or are using an older version of QuantaStor (v2) you can manually edit Linux configuration files to set the bonding mode. Note that this change will require a momentary interrupt in connectivity to an active bonded interface. If you have NFS or iSCSI connections currently accessing the bonded interface you wish to change you should schedule a maintenance window and disconnect the clients prior to making the changes.
Enable LACP 802.3ad Dynamic link aggregation
- If you have bonded interface already configured in the QuantaStor Manager, delete it.
- Edit the following bonding configuration files.
- In both files, chance the phrase bonding mode=0 so that it reads bonding mode=4.
- /etc/modprobe.d/bonding.conf
- /etc/modules
- Stop the bonding driver
- rmmod bonding
- Restart the bonding driver
- modprobe bonding
- Create a new bonded port in the QuantaStor Manager
Back to QuantaStor Administrators Guide
