Difference between revisions of "FC Target Port Enable"

From OSNEXUS Online Documentation Site
Jump to: navigation, search
m
m
 
Line 1: Line 1:
 
When a FC target port is ''disabled'' it is switched to ''initiator'' mode.  When enabled it is switched to ''target'' mode.  Additionally ports may be set to be in both initiator and target mode at the same time.  This [[dual-mode FC configuration]] article has information on how to set it up.
 
When a FC target port is ''disabled'' it is switched to ''initiator'' mode.  When enabled it is switched to ''target'' mode.  Additionally ports may be set to be in both initiator and target mode at the same time.  This [[dual-mode FC configuration]] article has information on how to set it up.
  
 +
'''Navigation: ''' Storage Management --> Storage System --> (target FC target port) --> Disable FC Initiator Mode ''(rightclick)''
  
 
[[File:Enable FC Target Port.png]]
 
[[File:Enable FC Target Port.png]]

Latest revision as of 16:16, 23 July 2018

When a FC target port is disabled it is switched to initiator mode. When enabled it is switched to target mode. Additionally ports may be set to be in both initiator and target mode at the same time. This dual-mode FC configuration article has information on how to set it up.

Navigation: Storage Management --> Storage System --> (target FC target port) --> Disable FC Initiator Mode (rightclick)

Enable FC Target Port.png


Return to the QuantaStor Web Admin Guide