Difference between revisions of "Physical Disk Identify"
From OSNEXUS Online Documentation Site
m |
m |
||
Line 1: | Line 1: | ||
[[File:Identify Phy Disk.jpg|thumb|512px|The physical disk LED for the selected disk to flash on and off in a pattern so that the disk may be easily identified in the enclosure.]] | [[File:Identify Phy Disk.jpg|thumb|512px|The physical disk LED for the selected disk to flash on and off in a pattern so that the disk may be easily identified in the enclosure.]] | ||
− | Generates IO activity on the disk by reading data in order to make the drive LED pulse on/off every 2 seconds. This can help identify a disk drive in the chassis | + | Generates IO activity on the disk by reading data in order to make the drive LED pulse on/off every 2 seconds. This can help identify a disk drive in the chassis<br> |
+ | '''Note:''' for hardware RAID units and disks there are separate identification operations available under the Hardware Enclosure & Controllers section. | ||
'''Navigation:''' Storage Management --> Physical Disks --> Physical Disk --> Identify ''(toolbar)'' | '''Navigation:''' Storage Management --> Physical Disks --> Physical Disk --> Identify ''(toolbar)'' |
Revision as of 11:25, 22 August 2019
Generates IO activity on the disk by reading data in order to make the drive LED pulse on/off every 2 seconds. This can help identify a disk drive in the chassis
Note: for hardware RAID units and disks there are separate identification operations available under the Hardware Enclosure & Controllers section.
Navigation: Storage Management --> Physical Disks --> Physical Disk --> Identify (toolbar)