QuantaStor CLI Command Reference v5.3

OSNEXUS QuantaStor CLI 5.3.0.074 Copyright (c) 2009-2019 OSNEXUS Corporation. All rights reserved.

USAGE

   qs COMMAND --mandatory-arg=value [--optional-arg=value] [--flags=force,async,...] [--server=ip,user,passwd] [-u=user,passwd] [--min [--nonames] | --noheader | --verbose | --xml] 
   qs imode|i  : Interactive mode (CTRL-C to exit)

HELP

   qs help|h [command-name|partial-command-name] [--min]

OUTPUT MODES

   --min           : Minimal mode prints command and required arguments plus a brief command 
                      description.
   --verbose       : Verbose mode prints command and all arguments, a brief command description 
                      plus detailed descriptions of each keyword argument.
   --xml           : XML output mode returns verbose XML output for integration with scripts and 
                      other systems.
   --min --nonames : Blocks automatic conversion of UUIDs to names (see disk-list, tp-list).

SERVER AUTHENTICATION

   --server=ipaddress[,username,password] : Comma separated values, no spaces.

   QuantaStor will attempt to authenticate with the default 'admin','password' if username and 
   password are not supplied. You may also provide authentication credentials by setting and 
   exporting the QS_SERVER environment variable (export QS_SERVER=ipaddress[,username[,password]]) 
   or by placing the credentials in the file '~/.qs.cnf' (e.g., 192.168.0.10,admin,password).

EXAMPLES

   qs help --min
   qs pool-list
   qs volume-list --xml
   qs volume-create --name=vol1 --size=100G --pool=pool0

SEE ALSO

   qs-sendlogs <companyname>   : Sends a log report to support for analysis
   qs-iostat                   : Shows device and pool IO statistics
   qs-version                  : Shows version information about the local CLI, service, and grid nodes.
   qs-status                   : Shows the status of the key service daemons
   qs-showlog                  : Prints the service log, use -f to tail the log, -e to check for errors & warnings
   qs-util                     : Various system and common RAID controller utility commands
   qs-zconvert                 : For importing and converting foreign OpenZFS filesystems into QuantaStor

COMMAND

help

Display help for all commands. 'qs help' provides a verbose listing of all commands with their input parameters. Use 'qs help --min' for a compacted list of commands, or use 'qs help <command|partial-command>' for help on aspecific category or command.

 qs help|h [--command=value ] [--category=value ] [--wiki=value ] [--api=value ] 

	command	A specific CLI command to get detailed help with.
	category	Category of commands to get help with (acl, alert, host, host-group, license, role, session, schedule, pool, quota, system, volume, volume-group, task, user, user-group).
	wiki	Generates help output in a format that's importable into MediaWiki.
	api	Generates help output in a parsable format for automating API.

tc-commands

List of commands for tab completion

 qs tc-commands [--command=value ] 

command

Command to show method args for.

Alert Management [ALERT]

Alerts are generated by the system and routed to the administrators via the various call-home mechanisms which include email, SNMP, PagerDuty, Slack, and custom alert handlers. Alerts include a severity, a descriptive message, and in most cases an identifier referring to the element of the system or grid that is the subject of the alert.

Collapse

alert-clear

Deletes the alert with the specified ID.

 qs alert-clear|a-clear --id=value 

id

Unique identifier (GUID) for the object.

alert-clear-all

Clears all the alerts.

 qs alert-clear-all|a-clear-all 

alert-config-get

Alert configuration settings indicate where alert notifications should be sent.

 qs alert-config-get|ac-get 

alert-config-set

Sets the alert configuration settings such as the administrator email address, SMTP server address, etc. Be sure to use the alert-raise command to generate a test alert after you modify the alert configuration settings to ensure that emails are being properly sent.

 qs alert-config-set|ac-set [--sender-email=value ] [--smtp-server=value ] [--smtp-port=value ] [--smtp-user=value ] [--smtp-password=value ] [--smtp-auth=value ] [--support-email=value ] [--freespace-warning=value ] [--freespace-alert=value ] [--freespace-critical=value ] [--pagerduty-key=value ] [--slack-webhook=value ] [--mattermost-webhook=value ] [--enable-alerts=value ] [--disable-alerts=value ] [--pause-alerts=value ] 

	sender-email	Sender email address to be used for alert emails sent from the storage system.
	smtp-server	IP Address of the SMTP service where emails should be routed through.
	smtp-port	Port number of the SMTP service (eg 25, 465, 587) where emails should be routed through (0 indicates auto-select).
	smtp-user	SMTP user name to use for secure SMTP access to your SMTP server for sending alert emails.
	smtp-password	SMTP password to use for secure SMTP access to your SMTP server.
	smtp-auth	SMTP security mode.
	support-email	Email address for local customer support.
	freespace-warning	The percentage of free-space left in a pool at which a warning is sent to indicate pool growth plans should be made.
	freespace-alert	The percentage (default=10) of free-space left in a pool at which alerts are generated.
	freespace-critical	The percentage (default=5) of free-space left in a pool at which all provisioning operations are blocked.
	pagerduty-key	Specifies the service key to which alerts will be posted to PagerDuty. Please see www.pagerduty.com for more detail on service keys.
	slack-webhook	Slack.com webhook URL for alert messages to be posted to via the Slack webhook API from the QuantaStor call-home alert system.
	mattermost-webhook	Mattermost.org webhook URL for alert messages to be posted to via the Mattermost incoming webhook API from the QuantaStor call-home alert system.
	enable-alerts	Enables previously disabled alerts, use '*' to enable all disabled alert triggers.
	disable-alerts	Disables the specified alert types/triggers. Specify specific triggers by UUID or by the SNMP trap index.
	pause-alerts	Pauses the specified alert types/triggers for 30 days.

alert-get

Gets information about a specific alert.

 qs alert-get|a-get --id=value 

id

Unique identifier (GUID) for the object.

alert-list

Returns a list of all the alerts from all systems in the grid. Adjust the settings for the 'admin' or custom user account(s) to indicate alerts to be sent out via email call-home mechanism.

 qs alert-list|a-list [--filtered=value ] 

filtered

Returns just the 'value' most recently created.

alert-raise

Allows one to raise a user generated alert for testing the SMTP server configuration settings.

 qs alert-raise|a-raise --title=value --message=value [--alert-severity=value ] 

	title	Title string to be echoed back from the server.
	message	Message string to be echoed back from the server.
	alert-severity	Severity of the user generated alert to be raise. [always, critical, error, *info, warning]

alert-type-get

Returns information about a specific alert type/trigger.

 qs alert-type-get|at-get --alert-trigger=value 

alert-trigger

Alert types/triggers can be turned on, off or paused for 30 days to reduce noise during maintenance.

alert-type-list

Returns a list of all the alert types/triggers and their state (enabled/disabled/paused)

 qs alert-type-list|at-list 

event-list

Returns a list of all the internal events in the event queue (used for service monitoring).

 qs event-list|ev-list [--index=value ] [--max=value ] [--time-stamp=value ] 

	index	Starting event index of where to begin listing events from.
	max	Maximum number of events to enumerate.
	time-stamp	Time-stamp of the service.

Backup Policy Management [BACKUP-POLICY]

Backup policies provide a mechanism for scheduling and executing automatic backups of 3rd party filers and other NFS/SMB shares in an environment directly to a Network Share.

Collapse

backup-job-list

Returns a list of backup jobs in the system.

 qs backup-job-list|bj-list 

backup-policy-create

Creates a ingest backup policy which pull data from NFS shares to the QuantaStor appliance.

 qs backup-policy-create|bp-create --name=value --desc=value --network-share=value --remote-hostname=value --remote-export-path=value --scan-threads=value [--remote-export-type=value ] [--retain-rules=value ] [--policy-type=value ] [--schedule-type=value ] [--interval=value ] [--hours=value ] [--days=value ] [--offset-minutes=value ] [--max-snaps=value ] [--rc-hourly=value ] [--rc-dailies=value ] [--rc-weeklies=value ] [--rc-monthlies=value ] [--rc-quarterlies=value ] [--retain-period=value ] [--purge-policy=value ] [--backup-to-root=value ] [--maintain-logs=value ] [--start-date=value ] [--enabled=value ] [--smb-username=value ] [--smb-password=value ] [--age-days-min=value ] [--age-days-max=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	network-share	Name or ID of a CIFS/NFS network share.
	remote-hostname	Name of the remote host containing NFS shares to be backed up
	remote-export-path	Remote export path to be mounted to access the data to be backed up.
	remote-export-type	Remote mount type [*nfs, smb]
	retain-rules	Retention rules (atime, ctime, mtime) [atime, ctime, *mtime]
	policy-type	Backup policy type [*inbound, outbound]
	scan-threads	Number of concurrent threads for walking/scanning the specified target export (Default:1,6,12,24,32,64)
	schedule-type	Specifies the timer type for the schedule. Interval schedules specify a delay interval (aka rest interval) between schedule activations and calendar schedules activate at specific days and times. Scheduled snapshot/backup/replication jobs are never run while work from a previous run for the same schedule is still active. [*calendar, interval]
	interval	(interval based) Delay interval in minutes between when a schedule run completes and the next one is started. Minimum schedule delay interval is 3 minutes.
	hours	(calendar based) For the specified days of the week, snapshots will be created at the specified hours. [10am, 10pm, 11am, 11pm, 12am, 12pm, 1am, 1pm, 2am, 2pm, *3am, 3pm, 4am, 4pm, 5am, 5pm, 6am, 6pm, 7am, 7pm, 8am, 8pm, 9am, 9pm]
	days	(calendar based) The days of the week on which this schedule should create snapshots. [fri, mon, sat, *sun, thu, tue, wed]
	offset-minutes	(calendar based) Delay the scheduled start time by specified minutes. For example, a 30min offset with scheduled trigger time of 1am and 4am will trigger at 1:30am and 4:30am respectively.
	max-snaps	Maximum number of snapshots to retain for this schedule, after which the oldest snapshot is removed before a new one is created.
	rc-hourly	Retention count of hourly checkpoints/snapshots. A retention count of 2 will retain 2 snapshots spanning the last 2 hours.
	rc-dailies	Retention count of daily checkpoints/snapshots. A retention count of 7 will retain 7 snapshots spanning the last week with a minimum of one day spacing between snapshots/checkpoints.
	rc-weeklies	Retention count of weekly checkpoints/snapshots. A retention count of 4 will retain 4 snapshots spanning the last month with a minimum of 7 day spacing between snapshots/checkpoints.
	rc-monthlies	Retention count of monthly checkpoints/snapshots. A retention count of 6 will retain 6 snapshots spanning the last half-year with a minimum of 30 day spacing between snapshots/checkpoints.
	rc-quarterlies	Retention count of quarterly checkpoints/snapshots. A retention count of 4 will retain 4 snapshots spanning a year with a minimum of 90 day spacing between snapshots/checkpoints.
	retain-period	Number of days of file history on the specified filer export to backup
	purge-policy	Indicates how old files should be cleaned up / purged from the backup. [after-backup, *daily, never, weekly]
	backup-to-root	Indicates that the backups should go into the root folder of the Network Share.
	maintain-logs	Maintain logs of all the files that were backed up in the /var/log/backup-log folder within the appliance.
	start-date	2016-12-29T00:00:00Z)
	enabled	Set to enabled to activate the backup policy.
	smb-username	Specifies the SMB username to use to access the specified remote filer SMB share.
	smb-password	Specifies the SMB password to use to access the specified remote filer SMB share.
	age-days-min	Minimum number of days old the file must be for it to be backed up by the Backup Policy. Setting this to 0 indicates no minimum age.
	age-days-max	Maximum number of days old the file may be for it to be backed up by the Backup Policy. Setting this to 0 indicates no maximum age. By setting both a minimum and a maximum of 0 all files are backed up. By setting one or both of a minimum and maximum age a file age range may be specified.

backup-policy-delete

Deletes the specified backup policy.

 qs backup-policy-delete|bp-delete --policy=value 

policy

A backup policy name or ID which is associated with a network share to do ingest backups.

backup-policy-disable

Disables the specified backup policy so job are not automatically run.

 qs backup-policy-disable|bp-disable --policy=value 

policy

A backup policy name or ID which is associated with a network share to do ingest backups.

backup-policy-enable

Enables a backup policy that was previously disabled.

 qs backup-policy-enable|bp-enable --policy=value 

policy

A backup policy name or ID which is associated with a network share to do ingest backups.

backup-policy-get

Returns detailed information on a specific backup policy.

 qs backup-policy-get|bp-get --policy=value 

policy

A backup policy name or ID which is associated with a network share to do ingest backups.

backup-policy-list

Returns a list of backup policies in the system.

 qs backup-policy-list|bp-list 

backup-policy-modify

Modifies the specified backup policy settings.

 qs backup-policy-modify|bp-modify --policy=value [--name=value ] [--desc=value ] [--remote-hostname=value ] [--remote-export-path=value ] [--remote-export-type=value ] [--retain-rules=value ] [--policy-type=value ] [--scan-threads=value ] [--schedule-type=value ] [--interval=value ] [--hours=value ] [--days=value ] [--offset-minutes=value ] [--max-snaps=value ] [--rc-hourly=value ] [--rc-dailies=value ] [--rc-weeklies=value ] [--rc-monthlies=value ] [--rc-quarterlies=value ] [--retain-period=value ] [--purge-policy=value ] [--backup-to-root=value ] [--maintain-logs=value ] [--start-date=value ] [--enabled=value ] [--smb-username=value ] [--smb-password=value ] [--age-days-min=value ] [--age-days-max=value ] 

	policy	A backup policy name or ID which is associated with a network share to do ingest backups.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	remote-hostname	Name of the remote host containing NFS shares to be backed up
	remote-export-path	Remote export path to be mounted to access the data to be backed up.
	remote-export-type	Remote mount type [*nfs, smb]
	retain-rules	Retention rules (atime, ctime, mtime) [atime, ctime, *mtime]
	policy-type	Backup policy type [*inbound, outbound]
	scan-threads	Number of concurrent threads for walking/scanning the specified target export (Default:1,6,12,24,32,64)
	schedule-type	Specifies the timer type for the schedule. Interval schedules specify a delay interval (aka rest interval) between schedule activations and calendar schedules activate at specific days and times. Scheduled snapshot/backup/replication jobs are never run while work from a previous run for the same schedule is still active. [*calendar, interval]
	interval	(interval based) Delay interval in minutes between when a schedule run completes and the next one is started. Minimum schedule delay interval is 3 minutes.
	hours	(calendar based) For the specified days of the week, snapshots will be created at the specified hours. [10am, 10pm, 11am, 11pm, 12am, 12pm, 1am, 1pm, 2am, 2pm, *3am, 3pm, 4am, 4pm, 5am, 5pm, 6am, 6pm, 7am, 7pm, 8am, 8pm, 9am, 9pm]
	days	(calendar based) The days of the week on which this schedule should create snapshots. [fri, mon, sat, *sun, thu, tue, wed]
	offset-minutes	(calendar based) Delay the scheduled start time by specified minutes. For example, a 30min offset with scheduled trigger time of 1am and 4am will trigger at 1:30am and 4:30am respectively.
	max-snaps	Maximum number of snapshots to retain for this schedule, after which the oldest snapshot is removed before a new one is created.
	rc-hourly	Retention count of hourly checkpoints/snapshots. A retention count of 2 will retain 2 snapshots spanning the last 2 hours.
	rc-dailies	Retention count of daily checkpoints/snapshots. A retention count of 7 will retain 7 snapshots spanning the last week with a minimum of one day spacing between snapshots/checkpoints.
	rc-weeklies	Retention count of weekly checkpoints/snapshots. A retention count of 4 will retain 4 snapshots spanning the last month with a minimum of 7 day spacing between snapshots/checkpoints.
	rc-monthlies	Retention count of monthly checkpoints/snapshots. A retention count of 6 will retain 6 snapshots spanning the last half-year with a minimum of 30 day spacing between snapshots/checkpoints.
	rc-quarterlies	Retention count of quarterly checkpoints/snapshots. A retention count of 4 will retain 4 snapshots spanning a year with a minimum of 90 day spacing between snapshots/checkpoints.
	retain-period	retain-period
	purge-policy	Indicates how old files should be cleaned up / purged from the backup. [after-backup, *daily, never, weekly]
	backup-to-root	Indicates that the backups should go into the root folder of the Network Share.
	maintain-logs	Maintain logs of all the files that were backed up in the /var/log/backup-log folder within the appliance.
	start-date	2016-12-29T00:00:00Z)
	enabled	Set to enabled to activate the backup policy.
	smb-username	Specifies the SMB username to use to access the specified remote filer SMB share.
	smb-password	Specifies the SMB password to use to access the specified remote filer SMB share.
	age-days-min	Minimum number of days old the file must be for it to be backed up by the Backup Policy. Setting this to 0 indicates no minimum age.
	age-days-max	Maximum number of days old the file may be for it to be backed up by the Backup Policy. Setting this to 0 indicates no maximum age. By setting both a minimum and a maximum of 0 all files are backed up. By setting one or both of a minimum and maximum age a file age range may be specified.

backup-policy-trigger

Triggers the specified backup policy which in turn starts a backup job.

 qs backup-policy-trigger|bp-trigger --policy=value 

policy

A backup policy name or ID which is associated with a network share to do ingest backups.

Scale-out Object / Ceph Management [CEPH]

Commands for management, monitoring, and configuration of Ceph object clusters and associated storage.

Collapse

ceph-cluster-add-member

Add a new storage system to existing Ceph Cluster.

 qs ceph-cluster-add-member|cc-amn --ceph-cluster=value --storage-system=value --port=value [--public-network=value ] [--cluster-network=value ] [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	storage-system	Name or ID of a storage system in a management grid.
	port	Name of unique ID of a physical network port/target port.
	public-network	Ceph public/client network CIDR (e.g. x.x.x.x/YY). Default: Computed from public/client interface.
	cluster-network	Ceph cluster/backend network CIDR (e.g. x.x.x.x/YY). Default: Computed from cluster/backend interface.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-cluster-create

Create a new Ceph Cluster using the specified QuantaStor nodes(s)

 qs ceph-cluster-create|cc-create --name=value --client-interface=value --backend-interface=value [--desc=value ] [--public-network=value ] [--cluster-network=value ] [--osd-default-pool-size=value ] [--auth-cluster-required=value ] [--auth-service-required=value ] [--auth-client-required=value ] [--enable-osd-encryption=value ] [--filestore-xattr-use-omap=value ] [--flags=value ] 

	name	Name of the Ceph Cluster.
	client-interface	Interface used by client to connect to ceph cluster for I/O.
	backend-interface	Interface used by ceph cluster for its backend communication.
	desc	A description for the object.
	public-network	Ceph public/client network CIDR (e.g. x.x.x.x/YY). Default: Computed from public/client interface.
	cluster-network	Ceph cluster/backend network CIDR (e.g. x.x.x.x/YY). Default: Computed from cluster/backend interface.
	osd-default-pool-size	Minimum number of written replicas for objects in the pool in order to ack a write operation to the client.(default=2).
	auth-cluster-required	Authentication mode for ceph cluster (default=cephx).
	auth-service-required	Authentication mode for ceph services (default=cephx).
	auth-client-required	Authentication mode for client managing the ceph cluster (default=cephx).
	enable-osd-encryption	To use encrypted OSD in the cluster.
	filestore-xattr-use-omap	To use object map for XATTRS. Set to true (default) for ext4 file systems.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-cluster-delete

Deletes the specified Ceph Cluster

 qs ceph-cluster-delete|cc-delete --ceph-cluster=value [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-cluster-fix-clock-skew

Adjusts the clocks on all the member nodes in the specified Ceph Cluster in order to address any clock skew issues.

 qs ceph-cluster-fix-clock-skew|cc-fcs --ceph-cluster=value [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-cluster-get

Gets information about a specific Ceph Cluster

 qs ceph-cluster-get|cc-get --ceph-cluster=value 

ceph-cluster

Ceph Cluster name or ID.

ceph-cluster-list

Returns a list of all the Ceph Clusters

 qs ceph-cluster-list|cc-list 

ceph-cluster-member-get

Gets information about a specific Ceph Cluster Member

 qs ceph-cluster-member-get|ccm-get --ceph-cluster-member=value 

ceph-cluster-member

Ceph Cluster Member name or ID.

ceph-cluster-member-list

Returns a list of all the Ceph Clusters Members

 qs ceph-cluster-member-list|ccm-list 

ceph-cluster-modify

Modify a Ceph Cluster using the specified QuantaStor nodes(s)

 qs ceph-cluster-modify|cc-modify --ceph-cluster=value [--desc=value ] [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	desc	A description for the object.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-cluster-remove-member

Remove a storage system from an existing Ceph Cluster.

 qs ceph-cluster-remove-member|cc-rmn --ceph-cluster=value --storage-system=value [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	storage-system	Name or ID of a storage system in a management grid.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-crush-rule-create-erasure

Create a custom Ceph CRUSH rule for object or block storage.

 qs ceph-crush-rule-create-erasure|ccr-create-era --ceph-crush-rule=value --ceph-cluster=value --ceph-pool-profile=value [--desc=value ] [--flags=value ] 

	ceph-crush-rule	Custom Ceph CRUSH rule name (unique within a Ceph Cluster) for block or object store.
	ceph-cluster	Ceph Cluster name or ID.
	ceph-pool-profile	Custom Ceph Pool profile name (unique within a Ceph Cluster) for block or object store.
	desc	A description for the object.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-crush-rule-create-replicated

Create a custom Ceph CRUSH rule for object or block storage.

 qs ceph-crush-rule-create-replicated|ccr-create-rep --ceph-crush-rule=value --ceph-cluster=value --ceph-crush-rule-deviceclass=value [--desc=value ] [--ceph-crush-rule-failuredomain=value ] [--ceph-crush-rule-root=value ] [--flags=value ] 

	ceph-crush-rule	Custom Ceph CRUSH rule name (unique within a Ceph Cluster) for block or object store.
	ceph-cluster	Ceph Cluster name or ID.
	ceph-crush-rule-deviceclass	Ceph CRUSH rule device class {'hdd', 'ssd', 'nvme'}
	desc	A description for the object.
	ceph-crush-rule-failuredomain	Ceph CRUSH rule failure domain { 'osd', 'host', 'rack' } : Default: 'host'
	ceph-crush-rule-root	Ceph CRUSH rule, root { Default: 'default' }
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-crush-rule-delete

Deletes the specified Ceph CRUSH rule.

 qs ceph-crush-rule-delete|ccr-delete --ceph-crush-rule=value [--flags=value ] 

	ceph-crush-rule	Custom Ceph CRUSH rule name (unique within a Ceph Cluster) for block or object store.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-crush-rule-get

Gets information about a specific Ceph CRUSH rule.

 qs ceph-crush-rule-get|ccr-get --ceph-crush-rule=value [--flags=value ] 

	ceph-crush-rule	Custom Ceph CRUSH rule name (unique within a Ceph Cluster) for block or object store.
	flags	Optional flags for the operation. [min]

ceph-crush-rule-list

Returns a list of all the Ceph CRUSH rule(s) present in the cluster.

 qs ceph-crush-rule-list|ccr-list --ceph-cluster=value [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	flags	Optional flags for the operation. [min]

ceph-gateway-add

Configure a new S3/SWIFT Object Storage (RADOS) Gateway for the Ceph Cluster

 qs ceph-gateway-add|cgw-add --ceph-cluster=value --ceph-cluster-member=value --gw-ipaddress=value [--gw-port=value ] [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	ceph-cluster-member	Ceph Cluster Member name or ID.
	gw-ipaddress	IPAddress used by Ceph S3/Swift (RADOS) Object Storage Gateway.
	gw-port	Port used by Ceph S3/Swift Object Storage Gateway (default:443).
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-gateway-get

Gets information about a specific Ceph S3/SWIFT Object Storage (RADOS) Gateway

 qs ceph-gateway-get|cgw-get --ceph-gateway=value 

ceph-gateway

S3/SWIFT Object (RADOS) Storage Gateway.

ceph-gateway-list

Returns a list of all the Ceph S3/SWIFT Object Storage (RADOS) Gateways

 qs ceph-gateway-list|cgw-list 

ceph-gateway-remove

Removes the specified Ceph S3/SWIFT Object Storage (RADOS) Gateway

 qs ceph-gateway-remove|cgw-remove --ceph-cluster=value --ceph-gateway=value [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	ceph-gateway	S3/SWIFT Object (RADOS) Storage Gateway.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-journal-create

Creates a group of Ceph Journal Devices on the specified Physical Disk.

 qs ceph-journal-create|cj-create --disk=value --storage-system=value [--device-count=value ] [--flags=value ] 

	disk	Name of the physical disk or its unique ID/serial number.
	storage-system	Name or ID of a storage system in a management grid.
	device-count	Number of journal devices to create on the specified high performance media/SSD device. (Device count 1-8). Default is 4 if not specified
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-journal-delete

Deletes the specified Ceph Journal and all journal partitions on the given physical disk, if a physical disk is specified. Note: This call will fail if there are one or more Journals still being used by OSDs in the system.

 qs ceph-journal-delete|cj-delete --ceph-journal-device=value --storage-system=value [--flags=value ] 

	ceph-journal-device	Ceph Journal Device name or ID.
	storage-system	Name or ID of a storage system in a management grid.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-journal-get

Returns details of a specific Ceph Journal Device

 qs ceph-journal-get|cj-get --ceph-journal-device=value 

ceph-journal-device

Ceph Journal Device name or ID.

ceph-journal-list

Returns a list of all the Ceph Journal Devices

 qs ceph-journal-list|cj-list 

ceph-metadata-server-add

Configure a new metadata server in the ceph cluster

 qs ceph-metadata-server-add|cmds-add --ceph-cluster=value --ceph-cluster-member=value [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	ceph-cluster-member	Ceph Cluster Member name or ID.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-metadata-server-get

Gets information about a specific ceph metadata server in the cluster

 qs ceph-metadata-server-get|cmds-get --ceph-metadata-server=value 

ceph-metadata-server

Ceph Metadata server name or ID.

ceph-metadata-server-list

Returns a list of all the ceph metadata servers configured in the cluster

 qs ceph-metadata-server-list|cmds-list 

ceph-metadata-server-remove

Removes the specified ceph metadata server

 qs ceph-metadata-server-remove|cmds-remove --ceph-cluster=value --ceph-metadata-server=value [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	ceph-metadata-server	Ceph Metadata server name or ID.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-monitor-add

Configure a new monitor for the Ceph Cluster

 qs ceph-monitor-add|cmon-add --ceph-cluster=value --ceph-cluster-member=value --monitor-ipaddress=value [--monitor-port=value ] [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	ceph-cluster-member	Ceph Cluster Member name or ID.
	monitor-ipaddress	IPAddress used by ceph monitor daemon for communication.
	monitor-port	Port used by ceph monitor daemon for communication (default:6789).
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-monitor-get

Gets information about a specific Ceph Monitor

 qs ceph-monitor-get|cmon-get --ceph-monitor=value 

ceph-monitor

Ceph Monitor service name or ID.

ceph-monitor-list

Returns a list of all the Ceph Monitors

 qs ceph-monitor-list|cmon-list 

ceph-monitor-remove

Removes the specified Ceph Monitor

 qs ceph-monitor-remove|cmon-remove --ceph-cluster=value --ceph-monitor=value [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	ceph-monitor	Ceph Monitor service name or ID.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-osd-create

Creates a new Ceph OSD on the specified storage pool

 qs ceph-osd-create|osd-create --ceph-cluster=value --data-pool=value [--journal-device=value ] [--desc=value ] [--osd-type=value ] [--weight=value ] [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	data-pool	Name of the storage pool or its unique ID (GUID) to allocate OSD Data store.
	journal-device	Name of the storage device or its unique ID (GUID) to allocate OSD Journal store.
	desc	A description for the object.
	osd-type	Ceph osd-type [*auto-select, bluestore, filestore]
	weight	Weight associated with the OSD. (default: Auto-configured based on size of Osd).
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-osd-delete

Deletes the specified Ceph OSD

 qs ceph-osd-delete|osd-delete --ceph-cluster=value --ceph-osd=value [--delete-data=value ] [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	ceph-osd	Ceph OSD name or ID.
	delete-data	Flag to specify deletion of user data along with this operation. (Default : false)
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-osd-get

Gets information about a specific Ceph Object Storage Daemon.

 qs ceph-osd-get|osd-get --ceph-osd=value 

ceph-osd

Ceph OSD name or ID.

ceph-osd-identify

Identify/blink the specified ceph OSD

 qs ceph-osd-identify|osd-identify --osd-list=value [--duration=value ] [--blink-type=value ] [--flags=value ] 

	osd-list	List of one or more ceph-osd.
	duration	Duration in seconds to repeat the disk identification pattern.
	blink-type	Type of hwDisk identify/blink: duration (default), on, or off [duration-seconds, off, on]
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-osd-list

Returns a list of all the Ceph Object Storage Daemons

 qs ceph-osd-list|osd-list 

ceph-osd-modify

Modifies the specified ceph OSD

 qs ceph-osd-modify|osd-modify --ceph-cluster=value --ceph-osd=value [--desc=value ] [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	ceph-osd	Ceph OSD name or ID.
	desc	A description for the object.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-osd-multi-create

Creates multiple new ceph OSD on the specified ceph cluster

 qs ceph-osd-multi-create|osd-multi-create --ceph-cluster=value --physical-disk-list=value [--journal-ssd-list=value ] [--use-unused-journal-partitions=value ] [--osd-type=value ] [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	physical-disk-list	List of comma separated physical disk ID to be used for OSD data disks during OSD create.
	journal-ssd-list	List of comma separated SSD disk ID to be used for OSD journal devices during OSD create.
	use-unused-journal-partitions	Used unused journal partition on storage system for OSD create.
	osd-type	Ceph osd-type [*auto-select, bluestore, filestore]
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-osd-replace-journal

Replace existing journal on the specified OSD with the newly specified Journal.

 qs ceph-osd-replace-journal|osd-rj --ceph-cluster=value --ceph-osd=value --ceph-journal-device=value [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	ceph-osd	Ceph OSD name or ID.
	ceph-journal-device	Ceph Journal Device name or ID.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-pool-create

Creates a new Ceph pool using the specified OSDs or Storage Pools

 qs ceph-pool-create|cpool-create --name=value --ceph-cluster=value [--osd-list=value ] [--desc=value ] [--placement-groups=value ] [--max-replicas=value ] [--min-replicas=value ] [--pool-type=value ] [--ceph-crush-rule-name=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	ceph-cluster	Ceph Cluster name or ID.
	osd-list	List of one or more ceph-osd.
	desc	A description for the object.
	placement-groups	Number of placement groups to assign to the Ceph pool.
	max-replicas	Maximum number of replicas (redundancy level) to be created of each block in the Ceph pool.
	min-replicas	Minimum number of replicas to have of each block while still allowing write access to the Ceph pool.
	pool-type	Type of Ceph pool, 'replicated' (mirror based, default) or 'erasure' which is like network RAID5.
	ceph-crush-rule-name	Ceph crush map rule set name. (default : 'default', if not specified)
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-pool-delete

Deletes the specified Ceph pool

 qs ceph-pool-delete|cpool-delete --ceph-cluster=value --ceph-pool=value [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	ceph-pool	Ceph Pool name or ID.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-pool-get

Gets information about a specific Ceph storage pool.

 qs ceph-pool-get|cpool-get --ceph-pool=value 

ceph-pool

Ceph Pool name or ID.

ceph-pool-list

Returns a list of all the Ceph storage pools.

 qs ceph-pool-list|cpool-list 

ceph-pool-modify

Sets the display name and/or description field for the Ceph pool.

 qs ceph-pool-modify|cpool-modify --ceph-cluster=value --ceph-pool=value [--name=value ] [--desc=value ] [--max-replicas=value ] [--ceph-crush-rule=value ] [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	ceph-pool	Ceph Pool name or ID.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	max-replicas	Maximum number of replicas (redundancy level) to be created of each block in the Ceph pool.
	ceph-crush-rule	Custom Ceph CRUSH rule name (unique within a Ceph Cluster) for block or object store.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-pool-profile-create

Create a custom ceph pool profile for object or block storage.

 qs ceph-pool-profile-create|cpp-create --ceph-pool-profile=value --ceph-cluster=value --ceph-data-chunk-count=value --ceph-code-chunk-count=value [--desc=value ] [--ceph-profile-failure-domain=value ] [--ceph-profile-technique=value ] [--ceph-profile-plugin=value ] [--flags=value ] 

	ceph-pool-profile	Custom Ceph Pool profile name (unique within a Ceph Cluster) for block or object store.
	desc	A description for the object.
	ceph-cluster	Ceph Cluster name or ID.
	ceph-data-chunk-count	Data chunk (k) count for erasure coded Ceph Pool.
	ceph-code-chunk-count	Check-sum (m) chunk count for erasure coded Ceph Pool.
	ceph-profile-failure-domain	Failure domain for the Ceph Pool {Default: host}.
	ceph-profile-technique	Erasure coding technique for Ceph Pool. {Default: reed-solomon-van}
	ceph-profile-plugin	Plug-in used for erasure coded Ceph Pool {Default: jerasure}
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-pool-profile-delete

Deletes the specified ceph pool profile.

 qs ceph-pool-profile-delete|cpp-delete --ceph-pool-profile=value [--flags=value ] 

	ceph-pool-profile	Custom Ceph Pool profile name (unique within a Ceph Cluster) for block or object store.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-pool-profile-get

Gets information about a specific ceph pool profile.

 qs ceph-pool-profile-get|cpp-get --ceph-pool-profile=value [--flags=value ] 

	ceph-pool-profile	Custom Ceph Pool profile name (unique within a Ceph Cluster) for block or object store.
	flags	Optional flags for the operation. [min]

ceph-pool-profile-list

Returns a list of all the ceph pool profile(s) present in the cluster.

 qs ceph-pool-profile-list|cpp-list --ceph-cluster=value [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	flags	Optional flags for the operation. [min]

ceph-rbd-create

Creates a new Ceph block device (RBD) in the specified Ceph pool.

 qs ceph-rbd-create|rbd-create --name=value --ceph-cluster=value --ceph-pool=value --size=value [--desc=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	ceph-cluster	Ceph Cluster name or ID.
	ceph-pool	ceph-pool
	size	Size may be specified in MiB, GiB, or TiB. examples: 4G, 100M, 1.4T
	desc	A description for the object.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-rbd-delete

Deletes the specified Ceph block device (RBD)

 qs ceph-rbd-delete|rbd-delete --ceph-cluster=value --ceph-rbd=value [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	ceph-rbd	Ceph RBD/Block Device name or ID.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-rbd-get

Gets information about a specific Ceph RDB / block device

 qs ceph-rbd-get|rbd-get --ceph-rbd=value 

ceph-rbd

Ceph RBD/Block Device name or ID.

ceph-rbd-list

Returns a list of all the Ceph RDB / block devices.

 qs ceph-rbd-list|rbd-list 

ceph-rbd-modify

Sets the display name and/or description field for the Ceph block device (RBD).

 qs ceph-rbd-modify|rbd-modify --ceph-cluster=value --ceph-rbd=value --name=value [--desc=value ] [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	ceph-rbd	Ceph RBD/Block Device name or ID.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-rbd-resize

Resizes the specified Ceph block device (RBD) to a larger size.

 qs ceph-rbd-resize|rbd-resize --ceph-cluster=value --ceph-rbd=value --size=value [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	ceph-rbd	Ceph RBD/Block Device name or ID.
	size	Size may be specified in MiB, GiB, or TiB. examples: 4G, 100M, 1.4T
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-rbd-snapshot

Creates an instant snapshot of the specified Ceph block device (RBD)

 qs ceph-rbd-snapshot|rbd-snap --ceph-cluster=value --ceph-rbd=value --name=value [--desc=value ] [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	ceph-rbd	Ceph RBD/Block Device name or ID.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	flags	Optional flags for the operation. [async, force, min, *none]

Cloud Backup Schedule Management [CLOUD-BACKUP]

Cloud Backup schedules provide a mechanism for automatic backups of storage volumes into remote S3/SWIFT object storage.

Collapse

cloud-backup-schedule-create

Creates a new schedule to automate backups to a cloud backup container.

 qs cloud-backup-schedule-create|cbs-create --name=value --container=value [--volume-list=value ] [--start-date=value ] [--enabled=value ] [--desc=value ] [--max-backups=value ] [--days=value ] [--hours=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	container	A cloud backup container into which storage volumes can be backed up. A cloud backup container is like an unlimited storage pool in the cloud.
	volume-list	A list of one or more storage volumes.
	start-date	2016-12-29T00:00:00Z)
	enabled	While the schedule is enabled snapshots will be taken at the designated times.
	desc	A description for the object.
	max-backups	Maximum number of backups to do of a given volume in a given backup schedule before the oldest backup is removed.
	days	(calendar based) The days of the week on which this schedule should create snapshots. [fri, mon, sat, *sun, thu, tue, wed]
	hours	(calendar based) For the specified days of the week, snapshots will be created at the specified hours. [10am, 10pm, 11am, 11pm, 12am, 12pm, 1am, 1pm, 2am, 2pm, *3am, 3pm, 4am, 4pm, 5am, 5pm, 6am, 6pm, 7am, 7pm, 8am, 8pm, 9am, 9pm]
	flags	Optional flags for the operation. [async]

cloud-backup-schedule-delete

Deletes the specified cloud backup schedule.

 qs cloud-backup-schedule-delete|cbs-delete --backup-sched=value [--flags=value ] 

	backup-sched	A cloud backup schedule periodically does a backup of a specified set of volumes into the cloud.
	flags	Optional flags for the operation. [async, force]

cloud-backup-schedule-disable

Disables a cloud backup schedule so that it does not trigger backups.

 qs cloud-backup-schedule-disable|cbs-disable --backup-sched=value [--flags=value ] 

	backup-sched	A cloud backup schedule periodically does a backup of a specified set of volumes into the cloud.
	flags	Optional flags for the operation. [async, force]

cloud-backup-schedule-enable

Enables a cloud backup schedule that was previously disabled.

 qs cloud-backup-schedule-enable|cbs-enable --backup-sched=value [--flags=value ] 

	backup-sched	A cloud backup schedule periodically does a backup of a specified set of volumes into the cloud.
	flags	Optional flags for the operation. [async, force]

cloud-backup-schedule-get

Gets detailed information about a specific cloud backup schedule.

 qs cloud-backup-schedule-get|cbs-get --backup-sched=value 

backup-sched

A cloud backup schedule periodically does a backup of a specified set of volumes into the cloud.

cloud-backup-schedule-list

Lists all the cloud backup schedules in the system.

 qs cloud-backup-schedule-list|cbs-list 

cloud-backup-schedule-modify

Modifies the settings for the specified cloud backup schedule.

 qs cloud-backup-schedule-modify|cbs-modify --backup-sched=value [--name=value ] [--start-date=value ] [--enabled=value ] [--desc=value ] [--container=value ] [--max-backups=value ] [--days=value ] [--hours=value ] [--flags=value ] 

	backup-sched	A cloud backup schedule periodically does a backup of a specified set of volumes into the cloud.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	start-date	2016-12-29T00:00:00Z)
	enabled	While the schedule is enabled snapshots will be taken at the designated times.
	desc	A description for the object.
	container	A cloud backup container into which storage volumes can be backed up. A cloud backup container is like an unlimited storage pool in the cloud.
	max-backups	Maximum number of backups to do of a given volume in a given backup schedule before the oldest backup is removed.
	days	(calendar based) The days of the week on which this schedule should create snapshots. [fri, mon, sat, *sun, thu, tue, wed]
	hours	(calendar based) For the specified days of the week, snapshots will be created at the specified hours. [10am, 10pm, 11am, 11pm, 12am, 12pm, 1am, 1pm, 2am, 2pm, *3am, 3pm, 4am, 4pm, 5am, 5pm, 6am, 6pm, 7am, 7pm, 8am, 8pm, 9am, 9pm]
	flags	Optional flags for the operation. [async]

cloud-backup-schedule-trigger

Immediately triggers the specified cloud backup schedule to start a backup.

 qs cloud-backup-schedule-trigger|cbs-trigger --backup-sched=value [--flags=value ] 

	backup-sched	A cloud backup schedule periodically does a backup of a specified set of volumes into the cloud.
	flags	Optional flags for the operation. [async, force]

cloud-backup-schedule-volume-add

Adds storage volumes to an existing cloud backup schedule.

 qs cloud-backup-schedule-volume-add|cbs-v-add --backup-sched=value [--volume-list=value ] 

	backup-sched	A cloud backup schedule periodically does a backup of a specified set of volumes into the cloud.
	volume-list	A list of one or more storage volumes.

cloud-backup-schedule-volume-remove

Removes storage volumes from an existing cloud backup schedule.

 qs cloud-backup-schedule-volume-remove|cbs-v-remove --backup-sched=value [--volume-list=value ] 

	backup-sched	A cloud backup schedule periodically does a backup of a specified set of volumes into the cloud.
	volume-list	A list of one or more storage volumes.

Cloud Container Management [CLOUD-CONTAINER]

Cloud containers provide a NAS gateway mechanism to bridging S3/SWIFT cloud storage to a local Network Share within an appliance.

Collapse

cloud-container-add

Recovers a cloud backup container that was previously removed or used with a prior installation.

 qs cloud-container-add|clcn-add --provider-creds=value --storage-url=value --container-type=value [--encryption-key=value ] [--enable-nfs=value ] [--attach-to=value ] [--mount-options=value ] [--storage-class=value ] 

	provider-creds	Credential ID for accessing your cloud storage provider account.
	storage-url	The Amazon S3 or other storage URL used to identify a cloud backup container.
	container-type	Specifies the type of container to create of either one-to-one (rclone) or dedup (s3ql). If deduplicate is specified then the data is compressed, encrypted, and deduplicated so it cannot be accessed directly as objects. As the name implies, the one-to-one mode creates one object for each file providing a true NAS gateway to object storage. [dedup, *rclone]
	encryption-key	A passphrase which is used to encrypt all the data sent to the cloud container.
	enable-nfs	Enable NFS sharing of the cloud container.
	attach-to	Appliance to attached the cloud container to. If not specified it will attach to the system the CLI/API call is routed to.
	mount-options	Customized mount options for the cloud container to optimize cache and other settings for a given workload.
	storage-class	Storage Class for the bucket.IBM COS (standard, vault, cold, flex)AWS (STANDARD, REDUCED_REDUNDANCY, STANDARD_IA, ONEZONE_IA)GOOGLE CLOUD (MULTI_REGIONAL, REGIONAL, NEARLINE, COLDLINE)

cloud-container-bucket-scan

Scans for available buckets using the specified cloud provider credentials.

 qs cloud-container-bucket-scan|clcn-bucket-scan --provider-creds=value --location-tag=value 

	provider-creds	Credential ID for accessing your cloud storage provider account.
	location-tag	Location tag of the endpoint such as sjc01, not always required.

cloud-container-create

Creates a cloud backup container into which cloud backups of storage volumes can be made.

 qs cloud-container-create|clcn-create --name=value --provider-creds=value [--desc=value ] [--location=value ] [--attach-to=value ] [--enable-nfs=value ] [--mount-options=value ] [--storage-class=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	provider-creds	Credential ID for accessing your cloud storage provider account.
	location	Cloud storage provider endpoint location.
	attach-to	Appliance to attached the cloud container to. If not specified it will attach to the system the CLI/API call is routed to.
	enable-nfs	Enable NFS sharing of the cloud container.
	mount-options	Customized mount options for the cloud container to optimize cache and other settings for a given workload.
	storage-class	Storage Class for the bucket.IBM COS (standard, vault, cold, flex)AWS (STANDARD, REDUCED_REDUNDANCY, STANDARD_IA, ONEZONE_IA)GOOGLE CLOUD (MULTI_REGIONAL, REGIONAL, NEARLINE, COLDLINE)

cloud-container-delete

Deletes the specified cloud backup container. WARNING, all data in the container will be destroyed.

 qs cloud-container-delete|clcn-delete --container=value [--delete-cloud-bucket=value ] 

	container	A cloud backup container into which storage volumes can be backed up. A cloud backup container is like an unlimited storage pool in the cloud.
	delete-cloud-bucket	Delete the bucket from the cloud.

cloud-container-disable

Disables access to the specified cloud container without having to remove it.

 qs cloud-container-disable|clcn-disable --container=value 

container

A cloud backup container into which storage volumes can be backed up. A cloud backup container is like an unlimited storage pool in the cloud.

cloud-container-enable

Enables a cloud container that was previously disabled or was inaccessible due to network connection issues.

 qs cloud-container-enable|clcn-enable --container=value 

container

A cloud backup container into which storage volumes can be backed up. A cloud backup container is like an unlimited storage pool in the cloud.

cloud-container-get

Returns detailed information on a specific cloud backup container.

 qs cloud-container-get|clcn-get --container=value 

container

A cloud backup container into which storage volumes can be backed up. A cloud backup container is like an unlimited storage pool in the cloud.

cloud-container-list

Returns a list of cloud backup containers in the system.

 qs cloud-container-list|clcn-list 

cloud-container-repair

Repairs the specified cloud backup container.

 qs cloud-container-repair|clcn-repair --container=value 

container

A cloud backup container into which storage volumes can be backed up. A cloud backup container is like an unlimited storage pool in the cloud.

cloud-provider-add

Adds a new private cloud object storage provider entry.

 qs cloud-provider-add|clp-add --name=value --location-name=value --location-tag=value --location-endpoint=value [--desc=value ] [--access-key=value ] [--secret-key=value ] [--project-id=value ] [--auth-file=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	location-name	Friendly name of the endpoint location.
	location-tag	Location tag of the endpoint such as sjc01, not always required.
	location-endpoint	FQDN/URL of the end-point
	access-key	The access key provided by your cloud storage provider for accessing your cloud storage account.
	secret-key	The secret key provided by your cloud storage provider for accessing your cloud storage account.
	project-id	The project Id provided by your cloud storage provider for accessing your cloud storage account.
	auth-file	Path to the account auth file provider by your cloud storage provider for accessing your cloud storage account.

cloud-provider-credentials-add

Adds cloud provider credentials to enable cloud backup to cloud backup containers.

 qs cloud-provider-credentials-add|clpc-add --provider=value --access-key=value --secret-key=value [--project-id=value ] [--auth-file=value ] 

	provider	A cloud provider is a storage provider like Amazon S3 which QuantaStor utilizes for backup in the cloud.
	access-key	The access key provided by your cloud storage provider for accessing your cloud storage account.
	secret-key	The secret key provided by your cloud storage provider for accessing your cloud storage account.
	project-id	The project Id provided by your cloud storage provider for accessing your cloud storage account.
	auth-file	Path to the account auth file provider by your cloud storage provider for accessing your cloud storage account.

cloud-provider-credentials-get

Returns information about the specified cloud provider credential.

 qs cloud-provider-credentials-get|clpc-get --provider-creds=value 

provider-creds

Credential ID for accessing your cloud storage provider account.

cloud-provider-credentials-list

Returns a list of all the cloud provider credentials in the system. Passwords are masked.

 qs cloud-provider-credentials-list|clpc-list 

cloud-provider-credentials-remove

Removes the specified cloud provider credentials

 qs cloud-provider-credentials-remove|clpc-remove --provider-creds=value 

provider-creds

Credential ID for accessing your cloud storage provider account.

cloud-provider-get

Returns detailed information about the specified cloud provider.

 qs cloud-provider-get|clp-get --provider=value 

provider

A cloud provider is a storage provider like Amazon S3 which QuantaStor utilizes for backup in the cloud.

cloud-provider-list

Returns the list of supported cloud providers.

 qs cloud-provider-list|clp-list 

cloud-provider-location-add

Adds a new endpoint location to an existing private cloud object storage provider.

 qs cloud-provider-location-add|clpl-add --provider=value --location-name=value --location-tag=value --location-endpoint=value 

	provider	A cloud provider is a storage provider like Amazon S3 which QuantaStor utilizes for backup in the cloud.
	location-name	Friendly name of the endpoint location.
	location-tag	Location tag of the endpoint such as sjc01, not always required.
	location-endpoint	FQDN/URL of the end-point

cloud-provider-location-get

Returns details of the specified cloud provider location endpoint.

 qs cloud-provider-location-get|clpl-get --location=value 

location

ID or name of a cloud provider location endpoint.

cloud-provider-location-list

Returns a list of all the object storage location endpoints in the grid.

 qs cloud-provider-location-list|clpl-list 

cloud-provider-location-remove

Removes the specified location endpoint from a cloud object storage provider entry.

 qs cloud-provider-location-remove|clpl-remove --location=value 

location

ID or name of a cloud provider location endpoint.

Physical Disk Management [DISK]

Physical disks are storage devices (SATA, SAS, nVME, SSD, HW RAID LVs, etc) that appear to the underlying QuantaStor operating system which can then be used to form storage pools.

Collapse

disk-format

Removes all encryption settings, partitions, does a quick format of the device, and then optionally shreds the contents.

 qs disk-format|pd-format --disk-list=value [--shred-mode=value ] [--release-io-fence=value ] [--flags=value ] 

	disk-list	Comma delimited (no spaces) list of drives to be used for the operation.
	shred-mode	Indicates the mode used to shred data on all the disks in the pool as part of the pool destroy process. [dod, nnsa, *none, random, usarmy, zeros]
	release-io-fence	Release all I/O fence reservations for the specified disk(s)
	flags	Optional flags for the operation. [async, force, min, *none]

disk-get

Gets information about a specific physical disk.

 qs disk-get|pd-get --disk=value [--flags=value ] 

	disk	Name of the physical disk or its unique ID/serial number.
	flags	Optional flags for the operation. [min]

disk-global-spare-add

Adds one or more dedicated hotspares to the global hotspare pool.

 qs disk-global-spare-add|hsm-add --disk-list=value [--flags=value ] 

	disk-list	Comma delimited (no spaces) list of drives to be used for the operation.
	flags	Optional flags for the operation. [async, force, min, *none]

disk-global-spare-marker-cleanup

Cleans up invalid marker records for the dedicated hotspare physical disks in the global hot-spare pool.

 qs disk-global-spare-marker-cleanup|hsm-cleanup [--flags=value ] 

flags

Optional flags for the operation. [async, force, min, *none]

disk-global-spare-marker-delete

Deletes the specified global hotspare marker object.

 qs disk-global-spare-marker-delete|hsm-del --name=value [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	flags	Optional flags for the operation. [async, force, min, *none]

disk-global-spare-marker-get

Returns information about the specified global hotspare marker object.

 qs disk-global-spare-marker-get|hsm-get --name=value [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	flags	Optional flags for the operation. [min]

disk-global-spare-marker-list

Enumerates marker records for the dedicated hotspare physical disks in the global hot-spare pool.

 qs disk-global-spare-marker-list|hsm-list [--flags=value ] 

flags

Optional flags for the operation. [min]

disk-global-spare-remove

Removes one or more dedicated hotspares from the global hotspare pool.

 qs disk-global-spare-remove|hsm-remove --disk-list=value [--flags=value ] 

	disk-list	Comma delimited (no spaces) list of drives to be used for the operation.
	flags	Optional flags for the operation. [async, force, min, *none]

disk-identify

Pulses the disk activity light so that the specified disk can be identified in the chassis.

 qs disk-identify|pd-id --disk-list=value [--pattern=value ] [--duration=value ] [--blink-type=value ] [--flags=value ] 

	disk-list	Comma delimited (no spaces) list of drives to be used for the operation.
	pattern	Pattern to flash the disk LED lights in, p = short pulse, P = long pulse, d = short delay, D = long delay, ex: pattern=pppD
	duration	Duration in seconds to repeat the disk identification pattern.
	blink-type	Type of hwDisk identify/blink: duration (default), on, or off [duration-seconds, off, on]
	flags	Optional flags for the operation. [async, force, min, *none]

disk-list

Enumerates all physical disks.

 qs disk-list|pd-list [--flags=value ] 

flags

Optional flags for the operation. [min]

disk-multipath-config-add

Adds physical disk multipath configuration entries.

 qs disk-multipath-config-add|dmpc-add --device-tag-list=value [--storage-system=value ] [--flags=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	device-tag-list	List of physical disk multipath tag strings: 'vendor:product'
	flags	Optional flags for the operation. [min]

disk-multipath-config-list

Enumerates physical disk multipath configuration entries.

 qs disk-multipath-config-list|dmpc-list [--storage-system=value ] [--flags=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	flags	Optional flags for the operation. [min]

disk-multipath-config-remove

Removes physical disk multipath configuration entries.

 qs disk-multipath-config-remove|dmpc-remove --device-tag-list=value [--storage-system=value ] [--flags=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	device-tag-list	List of physical disk multipath tag strings: 'vendor:product'
	flags	Optional flags for the operation. [min]

disk-multipath-config-scan

Scans physical disks for multipath capability.

 qs disk-multipath-config-scan|dmpc-scan [--storage-system=value ] [--flags=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	flags	Optional flags for the operation. [min]

disk-scan

Scans for any new physical disks that may have been hot-plugged into the storage system.

 qs disk-scan|pd-scan [--storage-system=value ] [--flags=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	flags	Optional flags for the operation. [min]

disk-spare-list

Enumerates dedicated hotspare physical disks in the global hotspare pool.

 qs disk-spare-list|pd-spare-list [--flags=value ] 

flags

Optional flags for the operation. [min]

path-list

Enumerates all physical disk paths for multi-path devices.

 qs path-list|pdp-list [--flags=value ] 

flags

Optional flags for the operation. [min]

Scale-out NAS / Gluster Management [GLUSTER]

Commands for the management and creation of scale-out Network Shares which uses integrated GlusterFS technology.

Collapse

gluster-brick-get

Gets information about a specific Gluster brick.

 qs gluster-brick-get|gb-get --gluster-brick=value 

gluster-brick

Name or ID of a Gluster brick

gluster-brick-list

Returns a list of all the Gluster bricks

 qs gluster-brick-list|gb-list 

gluster-ha-intf-get

Returns a list of all the Gluster HA failover interface definitions.

 qs gluster-ha-intf-get|gi-get --ha-interface=value 

ha-interface

High-availability interface for a specific Gluster Volume.

gluster-ha-intf-list

Gets information about a specific Gluster HA failover interface definition.

 qs gluster-ha-intf-list|gi-list 

gluster-peer-attach

Attaches a Gluster peer system to the specified Storage System on the given Hostname.

 qs gluster-peer-attach|gp-attach --source-peer=value --target-peer=value 

	source-peer	Storage System ID of the source storage system.
	target-peer	Host name or IP of the target Storage System.

gluster-peer-get

Gets information about a specific Gluster peer system

 qs gluster-peer-get|gp-get --gluster-peer=value 

gluster-peer

Name or ID of the Gluster peer

gluster-peer-list

Returns a list of all the Gluster peer systems.

 qs gluster-peer-list|gp-list 

gluster-peer-remove

Detaches a specific Gluster peer system.

 qs gluster-peer-remove|gp-remove --gluster-peer=value 

gluster-peer

Name or ID of the Gluster peer

gluster-volume-add-bricks

Adds one or more bricks on the specified volume.

 qs gluster-volume-add-bricks|gv-add-bricks --gluster-volume=value --pool-list=value --restripe-volume=value [--flags=value ] 

	gluster-volume	Name or ID of the Gluster volume
	pool-list	List of one or more storage pools.
	restripe-volume	Restripe files across the new Gluster bricks
	flags	Optional flags for the operation. [async, force, min, *none]

gluster-volume-create

Create a new Gluster volume with new Bricks on the specified Storage Pools.

 qs gluster-volume-create|gv-create --name=value --pool-list=value --replica-count=value --disperse-count=value --stripe-volume=value [--desc=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	pool-list	List of one or more storage pools.
	replica-count	Number of replica copies to have of each file in the Gluster volume (1 = no redundancy, 2 = mirroring)
	disperse-count	Dispersed is a parity based volume layout similar to RAID5 (disperse 5 = 4 data + 1 parity, disperse 3 = 2 data + 1 parity). Optionally supply a replica count to indicate the number of parity bricks per stripe where 2 is like RAID6 and 1 is like RAID5.
	stripe-volume	Enable striping of files across Gluster bricks
	flags	Optional flags for the operation. [async, force, min, *none]

gluster-volume-delete

Deletes the specified Gluster volume.

 qs gluster-volume-delete|gv-delete --gluster-volume=value 

gluster-volume

Name or ID of the Gluster volume

gluster-volume-get

Gets information about the specified Gluster volume

 qs gluster-volume-get|gv-get --gluster-volume=value 

gluster-volume

Name or ID of the Gluster volume

gluster-volume-list

Returns a list of all the Gluster volumes in the grid

 qs gluster-volume-list|gv-list 

gluster-volume-rebalance

Rebalances files across the bricks in the specified Gluster volume

 qs gluster-volume-rebalance|gv-rebalance --gluster-volume=value [--flags=value ] 

	gluster-volume	Name or ID of the Gluster volume
	flags	Optional flags for the operation. [async, force, min, *none]

gluster-volume-start

Starts the specified Gluster volume

 qs gluster-volume-start|gv-start --gluster-volume=value [--flags=value ] 

	gluster-volume	Name or ID of the Gluster volume
	flags	Optional flags for the operation. [async, force, min, *none]

gluster-volume-stop

Stops the specified Gluster volume.

 qs gluster-volume-stop|gv-stop --gluster-volume=value [--flags=value ] 

	gluster-volume	Name or ID of the Gluster volume
	flags	Optional flags for the operation. [async, force, min, *none]

Storage System Grid Management [GRID]

Commands for management and formation of grids of QuantaStor appliances which simplifies management and enables advanced features including HA, DR, and scale-out configurations.

Collapse

grid-add

Adds the specified storage system to the management grid.

 qs grid-add|mg-add --node-ipaddress=value [--node-username=value ] [--node-password=value ] [--flags=value ] 

	node-ipaddress	IP address of a storage system node.
	node-username	Admin user account with permissions to add/remove nodes from the grid.
	node-password	Admin user account password.
	flags	Optional flags for the operation. [async, force, min, *none]

grid-analyze-config

Generate a configuration analysis health report of all systems in the grid.

 qs grid-analyze-config|analyze-config [--flags=value ] 

flags

Optional flags for the operation. [async, force, min, *none]

grid-assoc-get

Get general information about the associated storage system management grid.

 qs grid-assoc-get|mg-aget --storage-system=value [--grid=value ] [--flags=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	grid	Name or ID of the storage system grid.
	flags	Optional flags for the operation. [min]

grid-assoc-list

Returns a list of the associated storage system nodes in the grid.

 qs grid-assoc-list|mg-alist 

grid-create

Creates a new management grid. A given storage system can only be a member of one grid at a time.

 qs grid-create|mg-create --name=value [--desc=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.

grid-delete

Deletes the management grid. After the grid is deleted each node in the grid operates independently again.

 qs grid-delete|mg-delete [--flags=value ] 

flags

Optional flags for the operation. [async, force, min, *none]

grid-get

Get general information about the storage system management grid.

 qs grid-get|mg-get 

grid-get-hosts

Returns the /etc/hosts configuration file configuration for grid nodes.

 qs grid-get-hosts|mg-get-hosts 

grid-modify

Modify the management grid properties.

 qs grid-modify|mg-modify --name=value [--desc=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.

grid-remove

Removes the specified storage system from the management grid.

 qs grid-remove|mg-remove --storage-system=value [--flags=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	flags	Optional flags for the operation. [async, force, min, *none]

grid-send-supportlogs

Collect support logs from storage systems specified (default, all systems in the grid) and send to OSNEXUS tech support.

 qs grid-send-supportlogs|mg-send-supportlogs [--sys-list=value ] [--flags=value ] 

	sys-list	List of one or more storage systems.
	flags	Optional flags for the operation. [async, force, min, *none]

grid-set-hosts

Configures the /etc/hosts configuration file on all systems to facilitate host name based gluster volume configurations.

 qs grid-set-hosts|mg-set-hosts --portid-list=value [--flags=value ] 

	portid-list	List of UUIDs for the ethernet ports to be used for grid wide /etc/hosts file configuration.
	flags	Optional flags for the operation. [async, force, min, *none]

grid-set-master

Sets the master node for a storage system.

 qs grid-set-master|mg-set --storage-system=value [--flags=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	flags	Optional flags for the operation. [async, force, min, *none]

Storage Pool HA Failover Management [HA-FAILOVER]

Storage Pools based on ZFS can be made Highly-Available when formed using SAS/FC/iSCSI disks connected to two or more appliances. HA storage pools can be moved dynamically between a pair of appliances and activated HA groups will do automatic failover to ensure availability to the underlying pool and it's associated volume and shares.

Collapse

ha-group-activate

Activates/enables the specified high-availability group to failover can occur on a system outage.

 qs ha-group-activate|hag-activate --ha-group=value 

ha-group

Name or UUID of a storage pool high-availability group

ha-group-create

Creates a new storage pool high-availability group.

 qs ha-group-create|hag-create --name=value --pool=value --sys-secondary=value --sys-primary=value [--desc=value ] [--ha-module=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	pool	Name of the storage pool or its unique ID (GUID).
	sys-secondary	Storage system associated with the failover group secondary node
	sys-primary	Storage system associated with the failover group primary node
	desc	A description for the object.
	ha-module	Name or UUID of a storage pool high-availability module

ha-group-deactivate

Deactivates the specified high-availability group so that failover policies are disabled.

 qs ha-group-deactivate|hag-deactivate --ha-group=value 

ha-group

Name or UUID of a storage pool high-availability group

ha-group-delete

Deletes the specified high-availability group

 qs ha-group-delete|hag-delete --ha-group=value 

ha-group

Name or UUID of a storage pool high-availability group

ha-group-failover

Manually triggers a failover of the specified storage pool using the associated storage pool HA group policy.

 qs ha-group-failover|hag-failover --ha-group=value --storage-system=value [--flags=value ] 

	ha-group	Name or UUID of a storage pool high-availability group
	storage-system	Name or ID of a storage system in a management grid.
	flags	Optional flags for the operation. [async, force, min, *none]

ha-group-get

Gets information about the specified storage pool HA group

 qs ha-group-get|hag-get --ha-group=value 

ha-group

Name or UUID of a storage pool high-availability group

ha-group-list

Returns a list of all the HA groups

 qs ha-group-list|hag-list 

ha-group-modify

Modifies the settings for the specified high-availability group

 qs ha-group-modify|hag-modify --ha-group=value [--name=value ] [--desc=value ] [--sys-secondary=value ] [--ha-module=value ] [--verify-client-ips=value ] [--client-connectivity-check-policy=value ] [--port-linkstate-policy=value ] [--fc-port-linkstate-policy=value ] 

	ha-group	Name or UUID of a storage pool high-availability group
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	sys-secondary	Storage system associated with the failover group secondary node
	ha-module	Name or UUID of a storage pool high-availability module
	verify-client-ips	IP addresses of hosts that should be pinged to verify connectivity. If there's no connectivity a preemptive failover is attempted.
	client-connectivity-check-policy	Client connectivity failover policy indicates policy on when to failover if the designated IPs are not responding to ping checks. [all-nonresponsive, *disabled, majority-nonresponsive]
	port-linkstate-policy	Failover policy for Link Down ports associated with the HA pool configuration. [*all-linkdown, any-linkdown, disabled, majority-linkdown]
	fc-port-linkstate-policy	Failover policy for Link Down Fibre Channel ports associated with the HA pool configuration. [*all-linkdown, any-linkdown, disabled, majority-linkdown]

ha-interface-create

Creates a new virtual network interface for the specified HA failover group.

 qs ha-interface-create|hai-create --ha-group=value --parent-port=value --ip-address=value [--netmask=value ] [--interface-tag=value ] [--desc=value ] [--gateway=value ] [--mac-address=value ] [--iscsi-enable=value ] 

	ha-group	Name or UUID of a storage pool high-availability group
	parent-port	Parent network port like 'eth0' which the virtual interface should be attached to. On failover the virtual interface will attach to the port with the same name on the failover/secondary node.
	ip-address	IP Address of the host being added; if unspecified the service will look it up.
	netmask	Subnet IP mask (ex: 255.255.255.0)
	interface-tag	Tags are a alpha-numeric tag which is appended onto a given HA virtual interface for easy identification.
	desc	A description for the object.
	gateway	IP address of the network gateway
	mac-address	MAC Address
	iscsi-enable	Enables or disables iSCSI access to the specified port(s).

ha-interface-delete

Deletes the specified virtual network interface resource from the HA group

 qs ha-interface-delete|hai-delete --ha-interface=value 

ha-interface

Name or UUID of a storage pool high-availability virtual network interface

ha-interface-get

Gets information about the specified storage pool HA virtual network interface

 qs ha-interface-get|hai-get --ha-interface=value 

ha-interface

Name or UUID of a storage pool high-availability virtual network interface

ha-interface-list

Returns a list of all the HA interfaces on the specified group

 qs ha-interface-list|hai-list 

ha-module-get

Gets information about the specified storage pool HA module

 qs ha-module-get|ham-get --ha-module=value 

ha-module

Name or UUID of a storage pool high-availability module

ha-module-list

Returns a list of all the HA failover modules

 qs ha-module-list|ham-list 

ping-check

Pings the specified list of IP addresses and returns the list of IPs that responded to the ping check.

 qs ping-check|ping --verify-client-ips=value [--storage-system=value ] 

	verify-client-ips	IP addresses of hosts that should be pinged to verify connectivity. If there's no connectivity a preemptive failover is attempted.
	storage-system	Name or ID of a storage system in a management grid.

Host Management [HOST]

Storage Volumes must be assigned to Host(s) before the block storage (LUNs) can be accessed. Each Host entry is identified by one or more iSCSI IQNs and/or FibreChannel WWPNs.

Collapse

host-add

Modifies a host entry. The username/password fields are optional and are not yet leveraged by the QuantaStor system. Later this may be used to provide additional levels of integration such as automatic host side configuration of your iSCSI initiator.

 qs host-add|h-add --hostname=value [--iqn=value ] [--ip-address=value ] [--desc=value ] [--username=value ] [--password=value ] [--host-type=value ] [--flags=value ] 

	hostname	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	iqn	Initiator IQN (iSCSI Qualified Name) or FC WWPN of the host's iSCSI/FC HBA
	ip-address	IP Address of the host being added; if unspecified the service will look it up.
	desc	A description for the object.
	username	Administrator user name for the host, typically 'Administrator' for Windows hosts.
	password	Administrator password for the host; enables auto-configuration of host's iSCSI initiator.
	host-type	Operating system type of the host. [aix, hpux, linux, other, solaris, vmware, *windows, xenserver]
	flags	Optional flags for the operation. [async]

host-get

Gets information about a specific host.

 qs host-get|h-get --host=value 

host

Name of the host or its unique ID (GUID).

host-initiator-add

Adds an additional iSCSI host initiator IQN or FC WWPN to the specified host.

 qs host-initiator-add|hi-add --host=value --iqn=value 

	host	Name of the host or its unique ID (GUID).
	iqn	Initiator IQN (iSCSI Qualified Name) or FC WWPN of the host's iSCSI/FC HBA

host-initiator-get

Gets information about a specific host identified by its initiator IQN or FC WWPN.

 qs host-initiator-get|hi-get --iqn=value 

iqn

Initiator IQN (iSCSI Qualified Name) or FC WWPN of the host's iSCSI/FC HBA

host-initiator-list

Returns a list of all the initiators iSCSI IQNs and FC WWPNs of the specified host

 qs host-initiator-list|hi-list --host=value 

host

Name of the host or its unique ID (GUID).

host-initiator-remove

Removes a iSCSI IQN or FC WWPN host initiator entry from the specified Host.

 qs host-initiator-remove|hi-remove --host=value --iqn=value 

	host	Name of the host or its unique ID (GUID).
	iqn	Initiator IQN (iSCSI Qualified Name) or FC WWPN of the host's iSCSI/FC HBA

host-list

Returns a list of all the hosts that you have added to the QuantaStor system. Host groups allow you to assign storage to multiple host all at once. This is especially useful when you have a VMware or Windows cluster as you can assign and unassign storage to all nodes in the cluster in one operation.

 qs host-list|h-list 

host-modify

Modifies a host entry which contains a list of WWPN or IQN for a given host.

 qs host-modify|h-modify --host=value [--desc=value ] [--ip-address=value ] [--username=value ] [--password=value ] [--host-type=value ] [--hostname=value ] [--flags=value ] 

	host	Name of the host or its unique ID (GUID).
	desc	A description for the object.
	ip-address	IP Address of the host being added; if unspecified the service will look it up.
	username	Administrator user name for the host, typically 'Administrator' for Windows hosts.
	password	Administrator password for the host; enables auto-configuration of host's iSCSI initiator.
	host-type	Operating system type of the host. [aix, hpux, linux, other, solaris, vmware, *windows, xenserver]
	hostname	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	flags	Optional flags for the operation. [async]

host-remove

Removes the specified host, *WARNING* host's active iSCSI sessions will be dropped.

 qs host-remove|h-remove --host=value [--flags=value ] 

	host	Name of the host or its unique ID (GUID).
	flags	Optional flags for the operation. [async, force]

Host Group Management [HOST-GROUP]

Hosts can be grouped together into Host Group(s) to simplify assignment and management of Storage Volumes assigned to a cluster of hosts (eg. VMware).

Collapse

host-group-create

Creates a new host group with the specified name.

 qs host-group-create|hg-create --name=value --host-list=value [--desc=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	host-list	A list of one or more hosts by name or ID.
	desc	A description for the object.
	flags	Optional flags for the operation. [async]

host-group-delete

Removes the specified host group.

 qs host-group-delete|hg-delete --host-group=value [--flags=value ] 

	host-group	An arbitrary collection of hosts used to simplify volume ACL management for grids and other groups of hosts.
	flags	Optional flags for the operation. [async, force]

host-group-get

Gets information about a specific host group.

 qs host-group-get|hg-get --host-group=value 

host-group

An arbitrary collection of hosts used to simplify volume ACL management for grids and other groups of hosts.

host-group-host-add

Adds a host to the specified host group.

 qs host-group-host-add|hg-host-add --host-group=value --host-list=value 

	host-group	An arbitrary collection of hosts used to simplify volume ACL management for grids and other groups of hosts.
	host-list	A list of one or more hosts by name or ID.

host-group-host-remove

Removes a host from the specified host group.

 qs host-group-host-remove|hg-host-remove --host-group=value --host-list=value 

	host-group	An arbitrary collection of hosts used to simplify volume ACL management for grids and other groups of hosts.
	host-list	A list of one or more hosts by name or ID.

host-group-list

Returns a list of all the host groups.

 qs host-group-list|hg-list 

host-group-modify

Modifies the properties of a host group such as its name and/or description.

 qs host-group-modify|hg-modify --host-group=value [--name=value ] [--desc=value ] 

	host-group	An arbitrary collection of hosts used to simplify volume ACL management for grids and other groups of hosts.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.

Hardware RAID Management [HWRAID]

Integrated hardware management modules monitor, discover, correlate and manage all the key aspects of internal SAS HBAs and RAID Controllers.

Collapse

hw-alarm-clear-all

Clears all the hardware alarms that have been recorded for the specified hardware RAID controller.

 qs hw-alarm-clear-all|hwa-clear-all --controller=value 

controller

Name or ID of a hardware RAID controller.

hw-alarm-get

Returns information about a specific hardware alarm.

 qs hw-alarm-get|hwa-get --id=value 

id

Unique identifier (GUID) for the object.

hw-alarm-list

Returns a list of all the current hardware alarms/alert messages generated from the controller.

 qs hw-alarm-list|hwa-list [--controller=value ] 

controller

Name or ID of a hardware RAID controller.

hw-controller-change-security-key

Change the security key for encryption on SED/FDE-enabled drives on hardware RAID controller.

 qs hw-controller-change-security-key|hwc-change-security-key --controller=value --old-security-key=value --security-key=value 

	controller	Name or ID of a hardware RAID controller.
	old-security-key	Prior security key on HW Controller card, for changing key, for encryption on FDE-enabled secure disk drives.
	security-key	Security key on HW Controller card for encryption on FDE-enabled secure disk drives.

hw-controller-create-security-key

Create the security key for encryption on SED/FDE-enabled drives on hardware RAID controller.

 qs hw-controller-create-security-key|hwc-create-security-key --controller=value --security-key=value 

	controller	Name or ID of a hardware RAID controller.
	security-key	Security key on HW Controller card for encryption on FDE-enabled secure disk drives.

hw-controller-get

Returns information about a specific hardware RAID controller.

 qs hw-controller-get|hwc-get --controller=value 

controller

Name or ID of a hardware RAID controller.

hw-controller-group-get

Returns information about all the support hardware RAID controller group types.

 qs hw-controller-group-get|hwcg-get --controller-group=value 

controller-group

Name or ID of a hardware RAID controller group.

hw-controller-group-list

Returns a list of all the hardware controller groups.

 qs hw-controller-group-list|hwcg-list 

hw-controller-import-units

Scan and import foreign disks associated with RAID groups that were attached to another RAID controller or that require re-importing to the local appliance.

 qs hw-controller-import-units|hwc-import-units --controller=value 

controller

Name or ID of a hardware RAID controller.

hw-controller-list

Returns a list of all the hardware controllers.

 qs hw-controller-list|hwc-list [--controller-group=value ] 

controller-group

Name or ID of a hardware RAID controller group.

hw-controller-rescan

Rescans the hardware controller to look for new disks and RAID units.

 qs hw-controller-rescan|hwc-rescan --controller=value 

controller

Name or ID of a hardware RAID controller.

hw-controller-rescan-all

Rescans the system to rediscover all hardware controllers and to look for new disks and RAID units on all controllers.

 qs hw-controller-rescan-all|hwc-rescan-all [--storage-system=value ] 

storage-system

Name or ID of a storage system in a management grid.

hw-disk-clear-missing

Clears all the hardware disk devices which are marked as missing and are no longer present. This clears that information from the QuantaStor grid database.

 qs hw-disk-clear-missing|hwd-clear-missing [--controller=value ] [--storage-system=value ] 

	controller	Name or ID of a hardware RAID controller.
	storage-system	Name or ID of a storage system in a management grid.

hw-disk-delete

Marks the specified disk so that it can be removed from the enclosure. Disks marked as hot-spares will return to normal status after being deleted.

 qs hw-disk-delete|hwd-delete --disk-list=value [--flags=value ] 

	disk-list	Specifies one or more physical disks connected to a hardware RAID controller. Use 'all' to indicate all unused disks.
	flags	Optional flags for the operation. [async, force, min, *none]

hw-disk-get

Returns information about a specific disk managed by a hardware RAID controller.

 qs hw-disk-get|hwd-get --disk=value 

disk

Specifies a physical disk connected to a hardware RAID controller.

hw-disk-identify

Flashes the LED indicator light on the specified disk so that it can be identified in the enclosure chassis.

 qs hw-disk-identify|hwd-identify --disk-list=value [--duration=value ] [--blink-type=value ] [--flags=value ] 

	disk-list	Specifies one or more physical disks connected to a hardware RAID controller. Use 'all' to indicate all unused disks.
	duration	Duration in seconds to repeat the disk identification pattern.
	blink-type	Type of hwDisk identify/blink: duration (default), on, or off [duration-seconds, off, on]
	flags	Optional flags for the operation. [async, force, min, *none]

hw-disk-list

Returns a list of all the disks managed by the specified hardware controller.

 qs hw-disk-list|hwd-list [--controller=value ] 

controller

Name or ID of a hardware RAID controller.

hw-disk-mark-good

Marks the specified disk as 'good' or 'ready'. You can use this to correct the disk status for good disks that the controller has in 'bad' or 'failed' state.

 qs hw-disk-mark-good|hwd-mark-good --disk-list=value [--flags=value ] 

	disk-list	Specifies one or more physical disks connected to a hardware RAID controller. Use 'all' to indicate all unused disks.
	flags	Optional flags for the operation. [async, force, min, *none]

hw-disk-mark-spare

Marks the specified disk as a universal hot spare within the group of RAID units managed by the controller in which the disk is attached.

 qs hw-disk-mark-spare|hwd-mark-spare --disk-list=value [--flags=value ] 

	disk-list	Specifies one or more physical disks connected to a hardware RAID controller. Use 'all' to indicate all unused disks.
	flags	Optional flags for the operation. [async, force, min, *none]

hw-disk-unmark-spare

Unmarks the specified disk as a universal hot spare within the group of RAID units managed by the controller in which the disk is attached.

 qs hw-disk-unmark-spare|hwd-unmark-spare --disk-list=value [--flags=value ] 

	disk-list	Specifies one or more physical disks connected to a hardware RAID controller. Use 'all' to indicate all unused disks.
	flags	Optional flags for the operation. [async, force, min, *none]

hw-enclosure-get

Returns information about a specific enclosure managed by the specified hardware RAID controller.

 qs hw-enclosure-get|hwe-get --enclosure=value 

enclosure

Name of a hardware RAID enclosure or it unique ID.

hw-enclosure-list

Returns a list of all the enclosures managed by the specified hardware RAID controller.

 qs hw-enclosure-list|hwe-list [--controller=value ] 

controller

Name or ID of a hardware RAID controller.

hw-enclosure-modify

Modifies the properties of a specific enclosure managed by the specified hardware RAID controller.

 qs hw-enclosure-modify|hwe-modify --enclosure=value [--alt-name=value ] [--description=value ] [--enclosure-layout=value ] [--chassis-tag=value ] 

	enclosure	Name of a hardware RAID enclosure or it unique ID.
	alt-name	Alternate name for an enclosure within a hardware controller.
	description	Description for an enclosure within a hardware controller.
	enclosure-layout	Enclosure layout for an enclosure within a hardware controller.
	chassis-tag	Name of a chassis tag for sorting hardware disks within hardware enclosures.

hw-enclosure-slot-identify

Flashes the LED indicator light on the specified slots in the RAID enclosure so that they can be identified in the enclosure.

 qs hw-enclosure-slot-identify|hwe-slot-identify --enclosure=value --slot-list=value [--duration=value ] [--blink-type=value ] [--flags=value ] 

	enclosure	Name of a hardware RAID enclosure or it unique ID.
	slot-list	List of the enclosure's slots to be identified/blinked.
	duration	Duration in seconds to repeat the disk identification pattern.
	blink-type	Type of hwDisk identify/blink: duration (default), on, or off [duration-seconds, off, on]
	flags	Optional flags for the operation. [async]

hw-unit-auto-create

Creates new hardware RAID units automatically using available disk resources according to the selection criteria.

 qs hw-unit-auto-create|hwu-auto-create --raid-level=value [--disks-per-unit=value ] [--disk-category=value ] [--min-size=value ] [--max-size=value ] [--unit-count=value ] [--options=value ] [--storage-system=value ] [--controller=value ] [--flags=value ] 

	raid-level	Hardware RAID type for a hardware RAID unit. [*RAID0, RAID1, RAID5, RAID6]
	disks-per-unit	Number of disks to select for each new hardware RAID unit to be created. Example, 5 disks indicates 4d+1p when selected with RAID5 layout type, RAID0 default = 1.
	disk-category	Any, SSD, or HDD, this allows filtering by disk type so that new hardware RAID units are created using the correct category of disks. [*ANY, HDD, SSD]
	min-size	Minimum size of the disks to be selected for creation of new hardware RAID units
	max-size	Maximum size of the disks to be selected for creation of new hardware RAID units, useful for limiting the selection to a specific group of drives.
	unit-count	Maximum number of units to create, if 0 then all available disks will be used after filtering.
	options	Special options to hardware encryption policy.
	storage-system	Name or ID of a storage system in a management grid.
	controller	Name or ID of a hardware RAID controller.
	flags	Optional flags for the operation. [async, force, min, *none]

hw-unit-create

Creates a new hardware RAID unit using the specified controller.

 qs hw-unit-create|hwu-create --raid=value --disk-list=value [--controller=value ] [--flags=value ] 

	raid	Hardware RAID type for a hardware RAID unit. [*AUTO, RAID0, RAID1, RAID10, RAID5, RAID50, RAID6, RAID60]
	disk-list	Specifies one or more physical disks connected to a hardware RAID controller. Use 'all' to indicate all unused disks.
	controller	Name or ID of a hardware RAID controller.
	flags	Optional flags for the operation. [async, force, min, *none]

hw-unit-delete

Deletes the specified RAID unit. Note that you must first delete the Storage Pool before you delete the RAID unit.

 qs hw-unit-delete|hwu-delete --unit=value [--duration=value ] 

	unit	Name of a hardware RAID unit or it unique ID.
	duration	Duration in seconds to repeat the disk identification pattern.

hw-unit-encrypt

Enable hardware SED/FDE encryption for the specified hardware RAID unit.

 qs hw-unit-encrypt|hwu-encrypt --unit=value [--options=value ] 

	unit	Name of a hardware RAID unit or it unique ID.
	options	Special options to hardware encryption policy.

hw-unit-get

Returns information about a specific RAID unit managed by the specified hardware RAID controller.

 qs hw-unit-get|hwu-get --unit=value 

unit

Name of a hardware RAID unit or it unique ID.

hw-unit-identify

Flashes the LED indicator light on all the disks in the RAID unit so that it can be identified in the enclosure.

 qs hw-unit-identify|hwu-identify --unit=value [--duration=value ] [--blink-type=value ] 

	unit	Name of a hardware RAID unit or it unique ID.
	duration	Duration in seconds to repeat the disk identification pattern.
	blink-type	Type of hwDisk identify/blink: duration (default), on, or off [duration-seconds, off, on]

hw-unit-list

Returns a list of all the RAID units managed by the specified hardware controller.

 qs hw-unit-list|hwu-list [--controller=value ] 

controller

Name or ID of a hardware RAID controller.

License Management [LICENSE]

Commands for management of QuantaStor license keys including adding, removing and listing keys within a grid of one or more appliances.

Collapse

license-activate

Activates the system using a activation key received from customer support.

 qs license-activate|lic-act --activation-key=value 

activation-key

Activation key you'll receive from customer support after you send the activation request code.

license-activate-online

Requests automatic activation via the online activation service.

 qs license-activate-online|lic-aon [--key=value ] [--renew-lease=value ] 

	key	Unique license key identifier, use license-list to get a list of these.
	renew-lease	Does a lease renewal of the license, only applies to Cloud Edition keys which require lease renewal.

license-add

Adds a license key using a license key block specified in a key file. In general, you have 7 days to activate your license using online activation of activation via email. If you do not activate after the 7 days the system will continue to run but you will not be able to make configuration changes.

 qs license-add|lic-add --key-file=value [--storage-system=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	key-file	Key file you received which contains a key block section.

license-get

Shows the current license key info, and any activation request code.

 qs license-get|lic-get [--key=value ] 

key

Unique license key identifier, use license-list to get a list of these.

license-list

Returns a list of all the registered license keys.

 qs license-list|lic-list 

license-modify-support

Applies reseller and support contract information to the license key. This information is also written to /var/opt/osnexus/quantastor/support.info for support log collection.

 qs license-modify-support|lic-modify-support --key=value [--reseller-name=value ] [--reseller-contact-number=value ] [--reseller-email=value ] [--support-contract-number=value ] 

	key	Unique license key identifier, use license-list to get a list of these.
	reseller-name	Full name of the reseller technical support contact.
	reseller-contact-number	Phone number of the reseller technical support contact.
	reseller-email	Email address of the reseller technical support contact.
	support-contract-number	Reseller support contract reference number.

license-remove

Removes the specified license key.

 qs license-remove|lic-remove --key=value 

key

Unique license key identifier, use license-list to get a list of these.

Cloud I/O Stats Management [METRICS]

Commands for the configuration and management of Librato Metrics cloud stats collection system.

Collapse

metrics-get

Get the current username, token, and interval settings for Librato Metrics.

 qs metrics-get|lm-get --storage-system=value 

storage-system

Name or ID of a storage system in a management grid.

metrics-set

Set the username, token, and interval for Librato Metrics posting.

 qs metrics-set|lm-set --username=value --token=value [--storage-system=value ] [--interval=value ] [--dashboards=value ] [--alert-anno=value ] [--config-anno=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	username	The username/email of the Librato Metrics account.
	token	The API token associated with the Librato Metrics account.
	interval	The interval in seconds of how often QuantaStor should post data to Librato Metrics.
	dashboards	Automatically create the QuantaStor system dashboard in Librato Metrics
	alert-anno	Add alert annotations to the Librato Metrics postings.
	config-anno	Add config annotations to the Librato Metrics postings.

Multi-Factor Authentication Configuration Management [MULTIFACTORAUTHCONFIG]

Multi-factor authentication configurations are required for enabling multi-factor authentication at login time for users.

Collapse

multi-factor-auth-config-create

Creates a multi-factor authentication configuration including API host, integration key, and secrety key to enable multi-factor authentication.

 qs multi-factor-auth-config-create|mfa-config-create --api-host=value --integration-key=value --secret-key=value --name=value [--description=value ] [--flags=value ] 

	api-host	API host for DUO multi-factor authentication
	integration-key	Integration key for DUO multi-factor authentication
	secret-key	secret-key
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	description	Description for the multi-factor authentication configuration.
	flags	Optional flags for the operation. [min]

multi-factor-auth-config-delete

Deletes the multi-factor authentication configuration and removes it from all users which are currently using the specified configuration.

 qs multi-factor-auth-config-delete|mfa-config-delete --mfa-config-list=value [--flags=value ] 

	mfa-config-list	mfa-config-list
	flags	Optional flags for the operation. [min]

multi-factor-auth-config-get

Gets information about the specified multi-factor authentication configuration.

 qs multi-factor-auth-config-get|mfa-config-get --mfa-config=value [--flags=value ] 

	mfa-config	Name or ID of a multi-factor authentication configuration.
	flags	Optional flags for the operation. [min]

multi-factor-auth-config-list

Lists all multi-factor authentication configurations.

 qs multi-factor-auth-config-list|mfa-config-list [--flags=value ] 

flags

Optional flags for the operation. [min]

multi-factor-auth-config-modify

Modifies the properties of the multi-factor authentication configuration such as its name and description.

 qs multi-factor-auth-config-modify|mfa-config-modify --mfa-config=value [--secret-key=value ] [--name=value ] [--desc=value ] [--flags=value ] 

	mfa-config	Name or ID of a multi-factor authentication configuration.
	secret-key	Secret key for DUO multi-factor authentication
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	flags	Optional flags for the operation. [min]

multi-factor-auth-config-set-user

Adds or removes multi-factor authentication configurations specified as 'user1=config1,user2=config2,~user3,...', prepend with tilde (~) to remove multi-factor authentication configurations from specified users.

 qs multi-factor-auth-config-set-user|mfa-config-set-user --user-config-assignments=value [--flags=value ] 

	user-config-assignments	User to multi-factor authentication configuration assignments specified as 'user1:config1,user2:config2,~user3,...' prepend with tilde (~) to remove configurations.
	flags	Optional flags for the operation. [min]

Network Share Namespace Management [NAMESPACE]

Commands for managing Network Shares Namespaces which controls NFS redirects and Microsoft DFS for the SMB protocol.

Collapse

share-namespace-add-shares

Adds one or more shares to the specified Network Share Namespace.

 qs share-namespace-add-shares|nspc-add-shares --namespace=value --preferred-ports=value --share-list=value 

	namespace	Network Share Namespaces group together one or more shares from one or more systems into a distributed single namespace using Microsoft DFS and NFSv4 redirection technology.
	preferred-ports	List of the preferred IP addresses for each system to use for Network Share access redirection within the namespace.
	share-list	A list of one or more network shares.

share-namespace-create

Creates a new Network Share Namespace which provides the ability to combine shares across appliances into a single namepace which integrates with Microsoft DFS.

 qs share-namespace-create|nspc-create --name=value --preferred-ports=value --share-list=value [--desc=value ] [--dfs-mode=value ] [--nfs-mode=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	preferred-ports	List of the preferred IP addresses for each system to use for Network Share access redirection within the namespace.
	share-list	A list of one or more network shares.
	desc	A description for the object.
	dfs-mode	dfs-mode [disabled, *flat, grouped]
	nfs-mode	nfs-mode [disabled, *flat]
	flags	Optional flags for the operation. [async, force]

share-namespace-delete

Deletes the specified Network Share Namespace, associated Network Shares are not deleted.

 qs share-namespace-delete|nspc-delete --namespace=value [--flags=value ] 

	namespace	Network Share Namespaces group together one or more shares from one or more systems into a distributed single namespace using Microsoft DFS and NFSv4 redirection technology.
	flags	Optional flags for the operation. [async, force]

share-namespace-get

Returns detailed information about the specified Network Share Namespace.

 qs share-namespace-get|nspc-get --namespace=value 

namespace

Network Share Namespaces group together one or more shares from one or more systems into a distributed single namespace using Microsoft DFS and NFSv4 redirection technology.

share-namespace-list

Returns a list of all the Network Share Namespaces in the grid.

 qs share-namespace-list|nspc-list 

share-namespace-modify

Modifies the selected Network Share Namespace properties including name, description, and features.

 qs share-namespace-modify|nspc-modify --namespace=value [--name=value ] [--desc=value ] [--dfs-mode=value ] [--nfs-mode=value ] [--flags=value ] 

	namespace	Network Share Namespaces group together one or more shares from one or more systems into a distributed single namespace using Microsoft DFS and NFSv4 redirection technology.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	dfs-mode	dfs-mode [disabled, *flat, grouped]
	nfs-mode	nfs-mode [disabled, *flat]
	flags	Optional flags for the operation. [async]

share-namespace-remove-shares

Removes one or more shares from the specified Network Share Namespace.

 qs share-namespace-remove-shares|nspc-remove-shares --namespace=value --preferred-ports=value --share-list=value 

	namespace	Network Share Namespaces group together one or more shares from one or more systems into a distributed single namespace using Microsoft DFS and NFSv4 redirection technology.
	preferred-ports	List of the preferred IP addresses for each system to use for Network Share access redirection within the namespace.
	share-list	A list of one or more network shares.

Storage Pool Management [POOL]

Storage Pools combined Physical Disks together to form fault-tolerant pools of storage that can be provisioned from. Both Storage Volumes and Network Shares are provisioned from Storage Pools where ZFS based pools are the default ans XFS based pools are used for scale-out configurations using Ceph or Gluster technology.

Collapse

pool-add-read-cache

Adds a dedicated read cache to the specified storage pool.

 qs pool-add-read-cache|p-add-read-cache --pool=value --disk-list=value [--flags=value ] 

	pool	Name of the storage pool or its unique ID (GUID).
	disk-list	Comma delimited (no spaces) list of drives to be used for the operation.
	flags	Optional flags for the operation. [async]

pool-add-spare

Adds a dedicated hot-spare to the specified storage pool.

 qs pool-add-spare|p-add --pool=value --disk-list=value [--flags=value ] 

	pool	Name of the storage pool or its unique ID (GUID).
	disk-list	Comma delimited (no spaces) list of drives to be used for the operation.
	flags	Optional flags for the operation. [async]

pool-add-write-log

Adds a dedicated write log to the specified storage pool.

 qs pool-add-write-log|p-add-write-log --pool=value --disk-list=value [--flags=value ] 

	pool	Name of the storage pool or its unique ID (GUID).
	disk-list	Comma delimited (no spaces) list of drives to be used for the operation.
	flags	Optional flags for the operation. [async]

pool-create

Creates a new storage pool from which storage volumes can be created.

 qs pool-create|p-create --name=value --disk-list=value [--raid-type=value ] [--pool-type=value ] [--desc=value ] [--is-default=value ] [--ssd=value ] [--compress=value ] [--nobarriers=value ] [--profile=value ] [--raid-set-size=value ] [--encrypt=value ] [--encryption-type=value ] [--passphrase=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters, special characters (-_.) excluding the parentheses. Size ranging from 2 to 40 characters.
	disk-list	Comma delimited (no spaces) list of drives to be used for the operation.
	raid-type	RAID type for the storage pool where RAID0 is striping, RAID1/10 are mirroring, and RAID5/50/6/60/7/70 are parity based fault-tolerant layouts. [*AUTO, LINEAR, RAID0, RAID1, RAID10, RAID5, RAID50, RAID6, RAID60, RAID7, RAID70]
	pool-type	The type of storage pool to be created. [ceph, swap, xfs, *zfs]
	desc	A description for the object.
	is-default	Indicates that this pool should be utilized as the default storage pool.
	ssd	Enable solid state disk (SSD) storage pool optimizations.
	compress	Enable storage volume compression on the pool, this boosts both read and write performance on most IO loads.
	nobarriers	Enable storage pool write optimizations. This requires that you have a hardware controller with a battery backup unit.
	profile	Specifies an optional IO optimization profile for the storage pool. Storage pool profiles control elements like read-ahead, queue depth and other device configurable settings.
	raid-set-size	Number of disks to use in each set of disks (aka VDEV) when creating a new storage pool with layout RAID10, RAIDZ1/50, RAIDZ2/60, or RAIDZ3.
	encrypt	Enables encryption on all devices in the storage pool. Encryption can only be enabled at the time of pool creation.
	encryption-type	Sets the encryption algorithm, currently only the default aes256 is supported. [aes256, *default]
	passphrase	Locks up the storage keys into an encrypted file after the pool has been created. After this the passphrase must be provided to start the storage pool. If no storage pool is provided then the pool is started automatically at system startup time.
	flags	Optional flags for the operation. [async]

pool-destroy

Deletes a storage pool, *WARNING* any data in the pool will be lost.

 qs pool-destroy|p-destroy --pool=value [--shred-mode=value ] [--flags=value ] 

	pool	Name of the storage pool or its unique ID (GUID).
	shred-mode	Indicates the mode used to shred data on all the disks in the pool as part of the pool destroy process. [dod, nnsa, *none, random, usarmy, zeros]
	flags	Optional flags for the operation. [async, force]

pool-device-get

Gets information about a specific storage pool device.

 qs pool-device-get|spd-get --name=value 

name

Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.

pool-device-group-get

Gets information about a specific storage pool device group.

 qs pool-device-group-get|spdg-get --pool-device-group=value 

pool-device-group

Name or UUID of a storage pool device group

pool-device-group-identify

Pulses the disk activity lights for all disks in the pool device group so they can be identified in the chassis.

 qs pool-device-group-identify|spdg-ident --pool-device-group=value [--duration=value ] [--blink-type=value ] [--flags=value ] 

	pool-device-group	Name or UUID of a storage pool device group
	duration	Duration in seconds to repeat the disk identification pattern.
	blink-type	Type of hwDisk identify/blink: duration (default), on, or off [duration-seconds, off, on]
	flags	Optional flags for the operation. [async]

pool-device-group-list

Returns a list of all the storage pool device groups.

 qs pool-device-group-list|spdg-list [--pool=value ] 

pool

Name of the storage pool or its unique ID (GUID).

pool-device-list

Returns a list of all the storage pool devices.

 qs pool-device-list|spd-list [--pool=value ] 

pool

Name of the storage pool or its unique ID (GUID).

pool-expand

Expands a storage pool after the underlying hardware RAID unit has been grown underneath.

 qs pool-expand|p-expand --pool=value [--flags=value ] 

	pool	Name of the storage pool or its unique ID (GUID).
	flags	Optional flags for the operation. [async]

pool-export

Deactivate and removes the storage pool from the storage system database so that it can be exported and used on another system.

 qs pool-export|p-export --pool=value [--release-io-fence=value ] [--metadata-only=value ] [--flags=value ] 

	pool	Name of the storage pool or its unique ID (GUID).
	release-io-fence	Release all I/O fence reservations for the specified disk(s)
	metadata-only	Export a new metadata archive to the '.poolmeta' directory for the specified pool. The pool is not exported, rather this option provides for a way to make a new explicit backup of pool metadata.
	flags	Optional flags for the operation. [async]

pool-get

Gets information about a specific storage pool.

 qs pool-get|p-get --pool=value 

pool

Name of the storage pool or its unique ID (GUID).

pool-grow

Grows the specified storage pool by adding an additional disk. You can only grow storage pools that are using the RAID5 or RAID6 layout.

 qs pool-grow|p-grow --pool=value --disk-list=value [--raid-type=value ] [--flags=value ] 

	pool	Name of the storage pool or its unique ID (GUID).
	disk-list	Comma delimited (no spaces) list of drives to be used for the operation.
	raid-type	RAID type for the storage pool where RAID0 is striping, RAID1/10 are mirroring, and RAID5/50/6/60/7/70 are parity based fault-tolerant layouts. [*AUTO, LINEAR, RAID0, RAID1, RAID10, RAID5, RAID50, RAID6, RAID60, RAID7, RAID70]
	flags	Optional flags for the operation. [async]

pool-health-check

Checks the health/state of the pool and recursively checks the health of the associated disk devices to see if there are any issues anywhere in the stack.

 qs pool-health-check|p-check --pool=value [--flags=value ] 

	pool	Name of the storage pool or its unique ID (GUID).
	flags	Optional flags for the operation. [min]

pool-identify

Pulses the disk activity lights for all disks in the pool so they can be identified in the chassis.

 qs pool-identify|p-id --pool=value [--duration=value ] [--blink-type=value ] [--flags=value ] 

	pool	Name of the storage pool or its unique ID (GUID).
	duration	Duration in seconds to repeat the disk identification pattern.
	blink-type	Type of hwDisk identify/blink: duration (default), on, or off [duration-seconds, off, on]
	flags	Optional flags for the operation. [async]

pool-import

Imports the named storage pool(s) which have been previously exported.

 qs pool-import|p-import --storage-system=value --pool-list=value [--metadata-only=value ] [--flags=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	pool-list	List of storage pools.
	metadata-only	Import only the metadata archive from the '.poolmeta' directory for the specified pool. Metadata is imported by default on all pool import operations. The metadata-only import option provides a way to reimport the metadata for an already imported pool.
	flags	Optional flags for the operation. [async]

pool-list

Returns a list of all the storage pools.

 qs pool-list|p-list [--vasa-support-only=value ] 

vasa-support-only

VASA support only.

pool-modify

Modifies the properties of the storage pool such as its name and description.

 qs pool-modify|p-modify --pool=value [--name=value ] [--is-default=value ] [--ssd=value ] [--compress=value ] [--nobarriers=value ] [--profile=value ] [--desc=value ] [--sync=value ] [--compression-type=value ] [--repair-policy=value ] [--approve-repair=value ] [--copies=value ] [--flags=value ] 

	pool	Name of the storage pool or its unique ID (GUID).
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	is-default	Indicates that this pool should be utilized as the default storage pool.
	ssd	Enable solid state disk (SSD) storage pool optimizations.
	compress	Enable storage volume compression on the pool, this boosts both read and write performance on most IO loads.
	nobarriers	Enable storage pool write optimizations. This requires that you have a hardware controller with a battery backup unit.
	profile	Specifies an optional IO optimization profile for the storage pool. Storage pool profiles control elements like read-ahead, queue depth and other device configurable settings.
	desc	A description for the object.
	sync	Synchronization policy to use for handling writes to the storage pool (standard, always, none). standard mode is a hybrid of write-through and write-back caching based on the O_SYNC flag, always mode is write-through to ZIL which could be SSD cache, and disabled indicates to always use async writes. [always, disabled, *standard]
	compression-type	off | lzjb | gzip | gzip-[1-9] | zle | lz4)
	repair-policy	assigned-only | assigned-and-global-exact | assigned-only-exact | manual-repair) [*assigned-and-global, assigned-and-global-exact, assigned-only, assigned-only-exact, manual]
	approve-repair	Set flag to approve a pending storage pool repair action that is currently deferred and requires explicit manual approval by an operator/admin to proceed
	copies	Indicates the number of copies of each block should be maintained in the Storage Pool. This is a way of getting duplicates for bit-rot protection on a single device (supported only on ZFS based pools).
	flags	Optional flags for the operation. [async]

pool-preimport-scan

Returns a list of pools that are available to import but that are not yet discovered.

 qs pool-preimport-scan|ppi-scan --storage-system=value [--flags=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	flags	Optional flags for the operation. [min]

pool-profile-get

Gets information about a specific storage pool profile.

 qs pool-profile-get|pp-get --profile=value 

profile

Specifies an optional IO optimization profile for the storage pool. Storage pool profiles control elements like read-ahead, queue depth and other device configurable settings.

pool-profile-list

Returns a list of all the storage pool profiles.

 qs pool-profile-list|pp-list 

pool-remove-read-cache

Removes the specified read cache from the specified pool.

 qs pool-remove-read-cache|p-remove-read-cache --pool=value --disk-list=value [--flags=value ] 

	pool	Name of the storage pool or its unique ID (GUID).
	disk-list	Comma delimited (no spaces) list of drives to be used for the operation.
	flags	Optional flags for the operation. [async]

pool-remove-spare

Removes the specified hot-spare from the specified pool.

 qs pool-remove-spare|p-remove --pool=value --disk-list=value [--flags=value ] 

	pool	Name of the storage pool or its unique ID (GUID).
	disk-list	Comma delimited (no spaces) list of drives to be used for the operation.
	flags	Optional flags for the operation. [async]

pool-remove-write-log

Removes the specified write log from the specified pool.

 qs pool-remove-write-log|p-remove-write-log --pool=value --disk-list=value [--flags=value ] 

	pool	Name of the storage pool or its unique ID (GUID).
	disk-list	Comma delimited (no spaces) list of drives to be used for the operation.
	flags	Optional flags for the operation. [async]

pool-scan

Rescans the specified storage system for storage pools.

 qs pool-scan|p-scan [--storage-system=value ] [--flags=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	flags	Optional flags for the operation. [async]

pool-scrub-start

Starts a scrub/verify operation on a ZFS-based Storage Pool (verifies data integrity and auto-corrects any bit-rot).See 'zpoolscrub' command for additional control. For example, 'zpoolscrub --cron' will setup an automatic monthly scrub.

 qs pool-scrub-start|p-scrub-start --pool=value [--flags=value ] 

	pool	Name of the storage pool or its unique ID (GUID).
	flags	Optional flags for the operation. [async]

pool-scrub-stop

Stops the an active scrub/verify operation on a ZFS-based Storage Pool.

 qs pool-scrub-stop|p-scrub-stop --pool=value [--flags=value ] 

	pool	Name of the storage pool or its unique ID (GUID).
	flags	Optional flags for the operation. [async]

pool-start

Starts up a previously stopped storage pool.

 qs pool-start|p-start --pool=value [--passphrase=value ] [--flags=value ] 

	pool	Name of the storage pool or its unique ID (GUID).
	passphrase	If the Storage Pool was created with an encryption passphrase then it must be specified in order to temporarily unlock the keys and start the Storage Pool.
	flags	Optional flags for the operation. [async]

pool-stop

Stops all volume activity to the pool and disables it for maintenance.

 qs pool-stop|p-stop --pool=value [--flags=value ] 

	pool	Name of the storage pool or its unique ID (GUID).
	flags	Optional flags for the operation. [async]

QoS Policy Management [QOSPOLICY]

Storage Volume access can be throttled to limit throughput independently for read and write IO in terms of MB/sec via Quality of Serivce (QoS) policies.

Collapse

qos-policy-create

Creates a new Quality-of-Service (QoS) policy template, which is used to apply throughput performance limits on Storage Volumes.

 qs qos-policy-create|qos-create --name=value --bw-read=value --bw-write=value [--desc=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	bw-read	Sets the maximum read bandwidth (e.g., 100MB) per second as a Quality of Service (QoS) control on the storage volume, 0 (default) indicates unlimited.
	bw-write	Sets the maximum write bandwidth (e.g., 100MB) per second as a Quality of Service (QoS) control on the storage volume, 0 (default) indicates unlimited.
	desc	A description for the object.
	flags	Optional flags for the operation. [async]

qos-policy-delete

Deletes a given QoS Policy and clears the QoS performance limits on all Storage Volumes associated with the policy.

 qs qos-policy-delete|qos-delete --qos-policy=value [--flags=value ] 

	qos-policy	Specifies the name or ID of a Quality of Service (QoS) policy. QoS policies limit the throughput and IOPs of a storage volume which is especially useful in multi-tenant environments.
	flags	Optional flags for the operation. [async, force]

qos-policy-get

Returns detailed information about a specific QoS policy.

 qs qos-policy-get|qos-get --qos-policy=value 

qos-policy

Specifies the name or ID of a Quality of Service (QoS) policy. QoS policies limit the throughput and IOPs of a storage volume which is especially useful in multi-tenant environments.

qos-policy-list

Returns details on the list of all QoS policy objects in the storage system grid.

 qs qos-policy-list|qos-list 

qos-policy-modify

Modifies an existing QoS policy with a new name, description, or performance limits. Changes are applied immediately to all volumes.

 qs qos-policy-modify|qos-modify --qos-policy=value [--name=value ] [--desc=value ] [--bw-read=value ] [--bw-write=value ] [--flags=value ] 

	qos-policy	Specifies the name or ID of a Quality of Service (QoS) policy. QoS policies limit the throughput and IOPs of a storage volume which is especially useful in multi-tenant environments.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	bw-read	Sets the maximum read bandwidth (e.g., 100MB) per second as a Quality of Service (QoS) control on the storage volume, 0 (default) indicates unlimited.
	bw-write	Sets the maximum write bandwidth (e.g., 100MB) per second as a Quality of Service (QoS) control on the storage volume, 0 (default) indicates unlimited.
	flags	Optional flags for the operation. [async]

Resource Group Quota Management [QUOTA]

Resource Groups can have quotas associated with them to limit which pools and how much storage can be provisioned from those pools by a given group of users which are members of a Resource Group

Collapse

provisioning-quota-create

Creates a new storage provisioning quota on a pool for the specified tenant resource cloud.

 qs provisioning-quota-create|pq-create --name=value --pool=value --cloud=value [--policy=value ] [--desc=value ] [--psize=value ] [--usize=value ] [--max-volumes=value ] [--max-shares=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	pool	Name of the storage pool or its unique ID (GUID).
	cloud	Name of a Storage Cloud or its unique id.
	policy	Indicates the type of quota to be created. [hard, *soft]
	desc	A description for the object.
	psize	The total thin-provisionable space allowed by this provisioning quota.
	usize	The total utilizable space allowed by this provisioning quota which may be less than the provisionable space.
	max-volumes	The maximum number of volumes that can be created using this quota, specify 0 for no limit.
	max-shares	The maximum number of share that can be created using this quota, specify 0 for no limit.
	flags	Optional flags for the operation. [async]

provisioning-quota-delete

Deletes a storage provisioning quota, the associated volumes are not deleted.

 qs provisioning-quota-delete|pq-delete --quota=value [--flags=value ] 

	quota	Name or ID of a storage provisioning quota.
	flags	Optional flags for the operation. [async, force]

provisioning-quota-get

Returns information about a specific storage provisioning quota.

 qs provisioning-quota-get|pq-get --quota=value 

quota

Name or ID of a storage provisioning quota.

provisioning-quota-list

Returns a list of all the storage provisioning quotas.

 qs provisioning-quota-list|pq-list 

provisioning-quota-modify

Modifies one to change the name and/or description of a storage provisioning quota.

 qs provisioning-quota-modify|pq-modify --quota=value --cloud=value [--name=value ] [--desc=value ] [--psize=value ] [--usize=value ] [--max-volumes=value ] [--max-shares=value ] [--policy=value ] [--flags=value ] 

	quota	Name or ID of a storage provisioning quota.
	cloud	Name of a Storage Cloud or its unique id.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	psize	The total thin-provisionable space allowed by this provisioning quota.
	usize	The total utilizable space allowed by this provisioning quota which may be less than the provisionable space.
	max-volumes	The maximum number of volumes that can be created using this quota, specify 0 for no limit.
	max-shares	The maximum number of share that can be created using this quota, specify 0 for no limit.
	policy	Indicates the type of quota to be created. [hard, *soft]
	flags	Optional flags for the operation. [async]

provisioning-quota-share-add

Adds one or more shares to the specified provisioning quota.

 qs provisioning-quota-share-add|pqs-add --quota=value --share-list=value 

	quota	Name or ID of a storage provisioning quota.
	share-list	A list of one or more network shares.

provisioning-quota-share-assoc-list

Returns a list of all the associated provisioning quotas of a specified share.

 qs provisioning-quota-share-assoc-list|pqs-alist --share=value 

share

Name or ID of a network share.

provisioning-quota-share-remove

Removes one or more shares from the specified provisioning quota.

 qs provisioning-quota-share-remove|pqs-remove --quota=value --share-list=value 

	quota	Name or ID of a storage provisioning quota.
	share-list	A list of one or more network shares.

provisioning-quota-volume-add

Adds one or more volumes to the specified provisioning quota.

 qs provisioning-quota-volume-add|pqv-add --quota=value --volume-list=value 

	quota	Name or ID of a storage provisioning quota.
	volume-list	A list of one or more storage volumes.

provisioning-quota-volume-assoc-list

Returns a list of all the associated provisioning quotas of a specified volume.

 qs provisioning-quota-volume-assoc-list|pqv-alist --volume=value 

volume

Name of the storage volume or its unique ID (GUID).

provisioning-quota-volume-remove

Removes one or more volumes from the specified provisioning quota

 qs provisioning-quota-volume-remove|pqv-remove --quota=value --volume-list=value 

	quota	Name or ID of a storage provisioning quota.
	volume-list	A list of one or more storage volumes.

Remote Replication Management [REPLICATION]

Remote-replication and associated replication schedules enable automatic replication to a pool of storage in a remote appliance for disaster-recovery (DR) purposes.

Collapse

replica-assoc-delete

Deletes the specified replication association between a source/target pair of volumes or shares.

 qs replica-assoc-delete|rep-assoc-delete --replica-assoc=value 

replica-assoc

Name or ID of a replica association between a source/target volume or share

replica-assoc-get

Returns details of the specified replication association.

 qs replica-assoc-get|rep-assoc-get --replica-assoc=value 

replica-assoc

Name or ID of a replica association between a source/target volume or share

replica-assoc-list

Returns a list of all the replication associations.

 qs replica-assoc-list|rep-assoc-list 

replica-assoc-rollback

Reverses the replication to send the changes on the target back to the source volume/share. Requires the --force flag.

 qs replica-assoc-rollback|rep-assoc-rollback --replica-assoc=value 

replica-assoc

Name or ID of a replica association between a source/target volume or share

replica-assoc-stop

Attempts to stop the replication process between a source/target pair of volumes or shares.

 qs replica-assoc-stop|rep-assoc-stop --replica-assoc=value 

replica-assoc

Name or ID of a replica association between a source/target volume or share

replica-assoc-sync

Restarts the replication process between a source/target pair of volumes or shares.

 qs replica-assoc-sync|rep-assoc-sync --replica-assoc=value 

replica-assoc

Name or ID of a replica association between a source/target volume or share

replica-report-entry-get

Get a replication report entry.

 qs replica-report-entry-get|rep-report-get --report-entry=value 

report-entry

Name or ID of the replication report entry

replica-report-entry-list

Returns a list of replication report entry.

 qs replica-report-entry-list|rep-report-list [--report-summary=value ] 

report-summary

Name or ID of the replication report summary

replica-report-summary-delete

Delete a replication report summary. All the report entries for this summary will be deleted.

 qs replica-report-summary-delete|rep-report-summary-delete --report-summary=value 

report-summary

Name or ID of the replication report summary

replica-report-summary-get

Get a replication report summary.

 qs replica-report-summary-get|rep-report-summary-get --report-summary=value 

report-summary

Name or ID of the replication report summary

replica-report-summary-list

Returns a list of replication report summary.

 qs replica-report-summary-list|rep-report-summary-list [--schedule=value ] 

schedule

Name or ID of a replication schedule.

replication-schedule-add

Adds one or more volumes/shares to the specified schedule.

 qs replication-schedule-add|rsch-add --schedule=value [--volume-list=value ] [--share-list=value ] 

	schedule	Name or ID of a replication schedule.
	volume-list	A list of one or more storage volumes.
	share-list	A list of one or more network shares.

replication-schedule-create

Creates a new replication schedule to replicate the specified storage volumes and shares to the specified target pool on a schedule.

 qs replication-schedule-create|rsch-create --name=value --target-pool=value [--volume-list=value ] [--share-list=value ] [--start-date=value ] [--enabled=value ] [--desc=value ] [--cloud=value ] [--max-replicas=value ] [--schedule-type=value ] [--interval=value ] [--days=value ] [--hours=value ] [--offset-minutes=value ] [--rc-hourly=value ] [--rc-dailies=value ] [--rc-weeklies=value ] [--rc-monthlies=value ] [--rc-quarterlies=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	target-pool	Target storage pool on remote system to replicate to.
	volume-list	A list of one or more storage volumes.
	share-list	A list of one or more network shares.
	start-date	2016-12-29T00:00:00Z)
	enabled	While the schedule is enabled snapshots will be taken at the designated times.
	desc	A description for the object.
	cloud	Name of a Storage Cloud or its unique id.
	max-replicas	Maximum number of replica snapshot checkpoints to retain for this schedule, after which the oldest snapshot is removed before a new one is created.
	schedule-type	Specifies the timer type for the schedule. Interval schedules specify a delay interval (aka rest interval) between schedule activations and calendar schedules activate at specific days and times. Scheduled snapshot/backup/replication jobs are never run while work from a previous run for the same schedule is still active. [*calendar, interval]
	interval	(interval based) Delay interval in minutes between when a schedule run completes and the next one is started. Minimum schedule delay interval is 3 minutes.
	days	(calendar based) The days of the week on which this schedule should create snapshots. [fri, mon, sat, *sun, thu, tue, wed]
	hours	(calendar based) For the specified days of the week, snapshots will be created at the specified hours. [10am, 10pm, 11am, 11pm, 12am, 12pm, 1am, 1pm, 2am, 2pm, *3am, 3pm, 4am, 4pm, 5am, 5pm, 6am, 6pm, 7am, 7pm, 8am, 8pm, 9am, 9pm]
	offset-minutes	(calendar based) Delay the scheduled start time by specified minutes. For example, a 30min offset with scheduled trigger time of 1am and 4am will trigger at 1:30am and 4:30am respectively.
	rc-hourly	Retention count of hourly checkpoints/snapshots. A retention count of 2 will retain 2 snapshots spanning the last 2 hours.
	rc-dailies	Retention count of daily checkpoints/snapshots. A retention count of 7 will retain 7 snapshots spanning the last week with a minimum of one day spacing between snapshots/checkpoints.
	rc-weeklies	Retention count of weekly checkpoints/snapshots. A retention count of 4 will retain 4 snapshots spanning the last month with a minimum of 7 day spacing between snapshots/checkpoints.
	rc-monthlies	Retention count of monthly checkpoints/snapshots. A retention count of 6 will retain 6 snapshots spanning the last half-year with a minimum of 30 day spacing between snapshots/checkpoints.
	rc-quarterlies	Retention count of quarterly checkpoints/snapshots. A retention count of 4 will retain 4 snapshots spanning a year with a minimum of 90 day spacing between snapshots/checkpoints.
	flags	Optional flags for the operation. [async]

replication-schedule-delete

Deletes a replication schedule, snapshots associated with the schedule are not removed.

 qs replication-schedule-delete|rsch-delete --schedule=value [--flags=value ] 

	schedule	Name or ID of a replication schedule.
	flags	Optional flags for the operation. [async, force]

replication-schedule-disable

Disables the specified replication schedule.

 qs replication-schedule-disable|rsch-disable --schedule=value [--flags=value ] 

	schedule	Name or ID of a replication schedule.
	flags	Optional flags for the operation. [async, force]

replication-schedule-enable

Enables the specified replication schedule.

 qs replication-schedule-enable|rsch-enable --schedule=value [--flags=value ] 

	schedule	Name or ID of a replication schedule.
	flags	Optional flags for the operation. [async, force]

replication-schedule-get

Returns information about a specific replication schedule.

 qs replication-schedule-get|rsch-get --schedule=value 

schedule

Name or ID of a replication schedule.

replication-schedule-list

Returns a list of all the replication schedules.

 qs replication-schedule-list|rsch-list 

replication-schedule-modify

Modifies the name, description or other properties of a replication schedule.

 qs replication-schedule-modify|rsch-modify --schedule=value [--name=value ] [--start-date=value ] [--enabled=value ] [--desc=value ] [--cloud=value ] [--max-replicas=value ] [--schedule-type=value ] [--interval=value ] [--days=value ] [--hours=value ] [--offset-minutes=value ] [--rc-hourly=value ] [--rc-dailies=value ] [--rc-weeklies=value ] [--rc-monthlies=value ] [--rc-quarterlies=value ] [--flags=value ] 

	schedule	Name or ID of a replication schedule.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	start-date	2016-12-29T00:00:00Z)
	enabled	While the schedule is enabled snapshots will be taken at the designated times.
	desc	A description for the object.
	cloud	Name of a Storage Cloud or its unique id.
	max-replicas	Maximum number of replica snapshot checkpoints to retain for this schedule, after which the oldest snapshot is removed before a new one is created.
	schedule-type	Specifies the timer type for the schedule. Interval schedules specify a delay interval (aka rest interval) between schedule activations and calendar schedules activate at specific days and times. Scheduled snapshot/backup/replication jobs are never run while work from a previous run for the same schedule is still active. [*calendar, interval]
	interval	(interval based) Delay interval in minutes between when a schedule run completes and the next one is started. Minimum schedule delay interval is 3 minutes.
	days	(calendar based) The days of the week on which this schedule should create snapshots. [fri, mon, sat, *sun, thu, tue, wed]
	hours	(calendar based) For the specified days of the week, snapshots will be created at the specified hours. [10am, 10pm, 11am, 11pm, 12am, 12pm, 1am, 1pm, 2am, 2pm, *3am, 3pm, 4am, 4pm, 5am, 5pm, 6am, 6pm, 7am, 7pm, 8am, 8pm, 9am, 9pm]
	offset-minutes	(calendar based) Delay the scheduled start time by specified minutes. For example, a 30min offset with scheduled trigger time of 1am and 4am will trigger at 1:30am and 4:30am respectively.
	rc-hourly	Retention count of hourly checkpoints/snapshots. A retention count of 2 will retain 2 snapshots spanning the last 2 hours.
	rc-dailies	Retention count of daily checkpoints/snapshots. A retention count of 7 will retain 7 snapshots spanning the last week with a minimum of one day spacing between snapshots/checkpoints.
	rc-weeklies	Retention count of weekly checkpoints/snapshots. A retention count of 4 will retain 4 snapshots spanning the last month with a minimum of 7 day spacing between snapshots/checkpoints.
	rc-monthlies	Retention count of monthly checkpoints/snapshots. A retention count of 6 will retain 6 snapshots spanning the last half-year with a minimum of 30 day spacing between snapshots/checkpoints.
	rc-quarterlies	Retention count of quarterly checkpoints/snapshots. A retention count of 4 will retain 4 snapshots spanning a year with a minimum of 90 day spacing between snapshots/checkpoints.
	flags	Optional flags for the operation. [async]

replication-schedule-remove

Removes one or more volumes/shares from the specified schedule.

 qs replication-schedule-remove|rsch-remove --schedule=value [--volume-list=value ] [--share-list=value ] 

	schedule	Name or ID of a replication schedule.
	volume-list	A list of one or more storage volumes.
	share-list	A list of one or more network shares.

replication-schedule-trigger

Triggers the specified schedule to run immediately.

 qs replication-schedule-trigger|rsch-trigger --schedule=value [--flags=value ] 

	schedule	Name or ID of a replication schedule.
	flags	Optional flags for the operation. [async, force]

Resource Domain Management [RESOURCE-DOMAIN]

Resource Domains group appliances by site, building, and rack so that scale-out data distribution technologies (Ceph CRUSH, GlusterFS) can be automatically configured.

Collapse

resource-domain-add-system

Adds one or more systems to a resource domain (site, rack, etc).

 qs resource-domain-add-system|rd-add-sys --domain-resource=value --system-list=value 

	domain-resource	ID or name of a domain resource.
	system-list	List of one or more systems to be associated with a resource domain.

resource-domain-assoc-get

Returns information about a system/appliance association with a specific domain (rack, building, site).

 qs resource-domain-assoc-get|rda-get [--system-resource=value ] [--resource-domain-assoc=value ] 

	system-resource	Storage system to be associated to a resource domain (site, rack, building) for use in automatic CRUSH map generation.
	resource-domain-assoc	Resource domain association between a system and a resource domain (site, rack, building) for use in automatic CRUSH map generation.

resource-domain-assoc-list

Returns a list of all the defined resource domain association objects which represent links between appliances to sites, buildings, and racks.

 qs resource-domain-assoc-list|rda-list 

resource-domain-create

Creates a new resource domain which identifies a site, building or rack of equipment.

 qs resource-domain-create|rd-create --name=value [--desc=value ] [--resource-type=value ] [--resource-parent=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	resource-type	Type of the domain resource which can be a site, building, rack, or server. [appliance, building, *rack, region, site]
	resource-parent	Parent domain resource name or ID. For example a rack resource can have a parent resource of type site or building.
	flags	Optional flags for the operation. [async]

resource-domain-delete

Deletes the specified resource domain.

 qs resource-domain-delete|rd-delete --domain-resource=value [--flags=value ] 

	domain-resource	ID or name of a domain resource.
	flags	Optional flags for the operation. [async, force]

resource-domain-get

Resource failure domains identify physical equipment, sites, racks so that data can be dispersed in such a way as to ensure fault-tolerance and high availability across sites and racks.

 qs resource-domain-get|rd-get --domain-resource=value 

domain-resource

ID or name of a domain resource.

resource-domain-list

Returns a list of all the defined resource domain objects which can include sites, buildings, racks, and servers.

 qs resource-domain-list|rd-list 

resource-domain-modify

Modifies an existing resource domain to change properties like name and description.

 qs resource-domain-modify|rd-modify --domain-resource=value [--name=value ] [--desc=value ] [--resource-type=value ] [--resource-parent=value ] [--flags=value ] 

	domain-resource	ID or name of a domain resource.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	resource-type	Type of the domain resource which can be a site, building, rack, or server. [appliance, building, *rack, region, site]
	resource-parent	Parent domain resource name or ID. For example a rack resource can have a parent resource of type site or building.
	flags	Optional flags for the operation. [async]

resource-domain-rm-system

Removes one or more systems from a resource domain (site, rack, etc)

 qs resource-domain-rm-system|rd-rm-sys --domain-resource=value --system-list=value 

	domain-resource	ID or name of a domain resource.
	system-list	List of one or more systems to be associated with a resource domain.

Multitenant Resource Group Management [RESOURCE-GROUP]

Resource Groups combine volumes, shares, and pools of storage together and so that they can be assigned to one more users (tenants). This facilitates multi-tenancy and delegation of common tasks like storage provisioning to end-users.

Collapse

resource-group-create

Creates a new tenant resource group comprised of the specified users, resources and chap information.

 qs resource-group-create|rg-create --name=value [--desc=value ] [--subject-list=value ] [--resource-list=value ] [--parent-cloud=value ] [--tier=value ] [--organization=value ] [--chap-user=value ] [--chap-pass=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	subject-list	A list subjects in the following format name:type. Ex: userName:user,groupName:user_group...
	resource-list	A list resources in the following format name:type. Ex: vol:volume,hostname:host...
	parent-cloud	The name or unique id of a tenant resource cloud.
	tier	The tier of the storage cloud.
	organization	The name of the organization this tenant resource cloud is assigned to.
	chap-user	An optional iSCSI CHAP username.
	chap-pass	An optional iSCSI CHAP password.
	flags	Optional flags for the operation. [async, force, min, *none]

resource-group-delete

Deletes a tenant's resource group, the resources and users will not be deleted.

 qs resource-group-delete|rg-delete --cloud=value [--flags=value ] 

	cloud	Name of a Storage Cloud or its unique id.
	flags	Optional flags for the operation. [async, force]

resource-group-get

Returns information of the specified tenant resource groups.

 qs resource-group-get|rg-get --cloud=value [--flags=value ] 

	cloud	Name of a Storage Cloud or its unique id.
	flags	Optional flags for the operation. [async, force]

resource-group-list

Returns a list of all the tenant resource groups.

 qs resource-group-list|rg-list [--flags=value ] 

flags

Optional flags for the operation. [async, force]

resource-group-modify

Modifies the name, description, parent resource group, tier, organization, and chap information of a resource group.

 qs resource-group-modify|rg-modify --cloud=value [--name=value ] [--desc=value ] [--parent-cloud=value ] [--tier=value ] [--organization=value ] [--chap-user=value ] [--chap-pass=value ] [--flags=value ] 

	cloud	Name of a Storage Cloud or its unique id.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	parent-cloud	The name or unique id of a tenant resource cloud.
	tier	The tier of the storage cloud.
	organization	The name of the organization this tenant resource cloud is assigned to.
	chap-user	An optional iSCSI CHAP username.
	chap-pass	An optional iSCSI CHAP password.
	flags	Optional flags for the operation. [async, force, min, *none]

resource-group-resource-add

Add one or more resources to the specified tenant resource group.

 qs resource-group-resource-add|rgr-add --cloud=value --resource-list=value 

	cloud	Name of a Storage Cloud or its unique id.
	resource-list	A list resources in the following format name:type. Ex: vol:volume,hostname:host...

resource-group-resource-mode

Set the mode of a specified resource in the tenant resource group.

 qs resource-group-resource-mode|rgr-mode --cloud=value --resource=value --access-mode=value [--flags=value ] 

	cloud	Name of a Storage Cloud or its unique id.
	resource	The unique id of a volume or volume group or share or host or host group.
	access-mode	Access mode for the volume.
	flags	Optional flags for the operation. [async, force, min, *none]

resource-group-resource-remove

Remove one or more resource from the specified tenant resource group.

 qs resource-group-resource-remove|rgr-remove --cloud=value --resource-list=value 

	cloud	Name of a Storage Cloud or its unique id.
	resource-list	A list resources in the following format name:type. Ex: vol:volume,hostname:host...

resource-group-subject-assoc-list

Returns a list of associated tenant resource groups to the specified subject (user or user group).

 qs resource-group-subject-assoc-list|rgsub-alist --subject=value [--flags=value ] 

	subject	The unique id of a user or user group.
	flags	Optional flags for the operation. [async, force]

resource-group-user-add

Add one or more users to the specified tenant resource group.

 qs resource-group-user-add|rgu-add --cloud=value --subject-list=value 

	cloud	Name of a Storage Cloud or its unique id.
	subject-list	A list subjects in the following format name:type. Ex: userName:user,groupName:user_group...

resource-group-user-remove

Remove one or more users from specified tenant resource group.

 qs resource-group-user-remove|rgu-remove --cloud=value --subject-list=value 

	cloud	Name of a Storage Cloud or its unique id.
	subject-list	A list subjects in the following format name:type. Ex: userName:user,groupName:user_group...

RBAC Role Management [ROLE]

Advanced Role Based Access Controls (RBAC) allow for the creation of custom roles that limit users to specific tasks and operations within a grid or Resource Group (collection of volumes, shares, and pools).

Collapse

password-policy-get

Returns details of the current user password policy settings for the storage grid / appliances.

 qs password-policy-get|pw-policy-get 

password-policy-set

Configures the password policy requirements for user accounts.

 qs password-policy-set|pw-policy-set [--special-chars=value ] [--complexity=value ] [--min-length=value ] [--max-length=value ] [--login-attempts-short-lockout=value ] [--login-attempts-perm-lockout=value ] [--days-until-exp=value ] [--unique-pw-reuse=value ] [--min-days-between-change=value ] [--inactive-days-lockout=value ] [--web-logout-timeout=value ] [--use-note=value ] [--web-access=value ] 

	special-chars	Special characters which are allowed to be used in a password.
	complexity	Password complexity requirement where 'strong' requires a mix of numbers, letters, and special characters. [standard, strong, *weak]
	min-length	Minimum password length (default 8)
	max-length	Maximum password length (default 40)
	login-attempts-short-lockout	Maximum password attempts before account is locked out for a short period. (default 5)
	login-attempts-perm-lockout	Maximum password attempts before account is locked out and must be unlocked by an administrator. (default 0/disabled)
	days-until-exp	Days until a user's password expires and must be changed. (default 0/disabled)
	unique-pw-reuse	Number of unique passwords that must be used before it can be reused.
	min-days-between-change	Minimum number of days before a password may be changed again.
	inactive-days-lockout	After N many days without a successful login for a given account this policy will automatically lock the user account unless it is the admin account (default 0/disabled).
	web-logout-timeout	After N many minutes of no activity in the web interface users will be logged out automatically. (default 30 minutes)
	use-note	System use notification message is an administrator supplied message that is presented to the user immediately after login. System use notification messages are required in some corporate and government environments to meet compliance standards.
	web-access	Unsecure HTTP access mode should be disabled or redirected to HTTPS in almost all configurations. [disable-http, *enable-http, redirect-http]

role-add

Adds a new role to the role based access control (RBAC) system.

 qs role-add|r-add --name=value [--desc=value ] [--permissions=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	permissions	List of permissions and/or permission groups to add to the specified role.

role-get

Gets information about the specified role.

 qs role-get|r-get --role=value [--export=value ] [--flags=value ] 

	role	Name of a security role or its unique ID (GUID).
	export	Export the role in XML format for use in the security definition file.
	flags	Optional flags for the operation. [min]

role-list

Returns a list of all the defined roles the RBAC system.

 qs role-list|r-list [--flags=value ] 

flags

Optional flags for the operation. [min]

role-modify

Modifies the name and/or description of a role

 qs role-modify|r-modify --role=value [--name=value ] [--desc=value ] 

	role	Name of a security role or its unique ID (GUID).
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.

role-permission-add

Adds additional permissions and/or permission groups to the specified role.

 qs role-permission-add|rp-add --role=value --permissions=value [--flags=value ] 

	role	Name of a security role or its unique ID (GUID).
	permissions	List of permissions and/or permission groups to add to the specified role.
	flags	Optional flags for the operation. [async, force, min, *none]

role-permission-def-list

Returns a list of all the defined permissions available to be assigned to roles in the RBAC system.

 qs role-permission-def-list|rpd-list 

role-permission-remove

Removes one or more permissions and/or permission groups from the specified role.

 qs role-permission-remove|rp-remove --role=value --permissions=value [--flags=value ] 

	role	Name of a security role or its unique ID (GUID).
	permissions	List of permissions and/or permission groups to add to the specified role.
	flags	Optional flags for the operation. [async, force, min, *none]

role-remove

Removes the specified role identified by name or ID

 qs role-remove|r-remove --role=value 

role

Name of a security role or its unique ID (GUID).

Snapshot Schedule Management [SCHEDULE]

Snapshot schedules make automatic instant point-in-time snapshots of Storage Volumes and/or Network Shares on a schedule. It is highly recommended that snapshot schedule(s) be created for all mission critical volumes and shares so that data and files can be easily recovered from a previous point in time.

Collapse

snap-schedule-add

Adds one or more volumes/shares to the specified schedule.

 qs snap-schedule-add|sch-add --schedule=value [--volume-list=value ] [--share-list=value ] 

	schedule	Name of a snapshot schedule or its unique ID (GUID).
	volume-list	A list of one or more storage volumes.
	share-list	A list of one or more network shares.

snap-schedule-assoc-list

Returns a list of all the volume/share associations for a given snapshot schedule.

 qs snap-schedule-assoc-list|scha-list --schedule=value 

schedule

Name of a snapshot schedule or its unique ID (GUID).

snap-schedule-create

Creates a new snapshot schedule comprised of the specified storage volumes.

 qs snap-schedule-create|sch-create --name=value [--volume-list=value ] [--share-list=value ] [--start-date=value ] [--enabled=value ] [--desc=value ] [--cloud=value ] [--max-snaps=value ] [--schedule-type=value ] [--interval=value ] [--days=value ] [--hours=value ] [--offset-minutes=value ] [--rc-hourly=value ] [--rc-dailies=value ] [--rc-weeklies=value ] [--rc-monthlies=value ] [--rc-quarterlies=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	volume-list	A list of one or more storage volumes.
	share-list	A list of one or more network shares.
	start-date	2016-12-29T00:00:00Z)
	enabled	While the schedule is enabled snapshots will be taken at the designated times.
	desc	A description for the object.
	cloud	Name of a Storage Cloud or its unique id.
	max-snaps	Maximum number of snapshots to retain for this schedule, after which the oldest snapshot is removed before a new one is created.
	schedule-type	Specifies the timer type for the schedule. Interval schedules specify a delay interval (aka rest interval) between schedule activations and calendar schedules activate at specific days and times. Scheduled snapshot/backup/replication jobs are never run while work from a previous run for the same schedule is still active. [*calendar, interval]
	interval	(interval based) Delay interval in minutes between when a schedule run completes and the next one is started. Minimum schedule delay interval is 3 minutes.
	days	(calendar based) The days of the week on which this schedule should create snapshots. [fri, mon, sat, *sun, thu, tue, wed]
	hours	(calendar based) For the specified days of the week, snapshots will be created at the specified hours. [10am, 10pm, 11am, 11pm, 12am, 12pm, 1am, 1pm, 2am, 2pm, *3am, 3pm, 4am, 4pm, 5am, 5pm, 6am, 6pm, 7am, 7pm, 8am, 8pm, 9am, 9pm]
	offset-minutes	(calendar based) Delay the scheduled start time by specified minutes. For example, a 30min offset with scheduled trigger time of 1am and 4am will trigger at 1:30am and 4:30am respectively.
	rc-hourly	Retention count of hourly checkpoints/snapshots. A retention count of 2 will retain 2 snapshots spanning the last 2 hours.
	rc-dailies	Retention count of daily checkpoints/snapshots. A retention count of 7 will retain 7 snapshots spanning the last week with a minimum of one day spacing between snapshots/checkpoints.
	rc-weeklies	Retention count of weekly checkpoints/snapshots. A retention count of 4 will retain 4 snapshots spanning the last month with a minimum of 7 day spacing between snapshots/checkpoints.
	rc-monthlies	Retention count of monthly checkpoints/snapshots. A retention count of 6 will retain 6 snapshots spanning the last half-year with a minimum of 30 day spacing between snapshots/checkpoints.
	rc-quarterlies	Retention count of quarterly checkpoints/snapshots. A retention count of 4 will retain 4 snapshots spanning a year with a minimum of 90 day spacing between snapshots/checkpoints.
	flags	Optional flags for the operation. [async]

snap-schedule-delete

Deletes a snapshot schedule, snapshots associated with the schedule are not removed.

 qs snap-schedule-delete|sch-delete --schedule=value [--flags=value ] 

	schedule	Name of a snapshot schedule or its unique ID (GUID).
	flags	Optional flags for the operation. [async, force]

snap-schedule-disable

Disables the specified snapshot schedule.

 qs snap-schedule-disable|sch-disable --schedule=value [--flags=value ] 

	schedule	Name of a snapshot schedule or its unique ID (GUID).
	flags	Optional flags for the operation. [async, force]

snap-schedule-enable

Enables the specified snapshot schedule.

 qs snap-schedule-enable|sch-enable --schedule=value [--flags=value ] 

	schedule	Name of a snapshot schedule or its unique ID (GUID).
	flags	Optional flags for the operation. [async, force]

snap-schedule-get

Returns information about a specific snapshot schedule.

 qs snap-schedule-get|sch-get --schedule=value 

schedule

Name of a snapshot schedule or its unique ID (GUID).

snap-schedule-list

Returns a list of all the snapshot schedules.

 qs snap-schedule-list|sch-list 

snap-schedule-modify

Modifies the name, description or other properties of a snapshot schedule.

 qs snap-schedule-modify|sch-modify --schedule=value [--name=value ] [--start-date=value ] [--enabled=value ] [--desc=value ] [--cloud=value ] [--max-snaps=value ] [--schedule-type=value ] [--interval=value ] [--days=value ] [--hours=value ] [--offset-minutes=value ] [--rc-hourly=value ] [--rc-dailies=value ] [--rc-weeklies=value ] [--rc-monthlies=value ] [--rc-quarterlies=value ] [--flags=value ] 

	schedule	Name of a snapshot schedule or its unique ID (GUID).
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	start-date	2016-12-29T00:00:00Z)
	enabled	While the schedule is enabled snapshots will be taken at the designated times.
	desc	A description for the object.
	cloud	Name of a Storage Cloud or its unique id.
	max-snaps	Maximum number of snapshots to retain for this schedule, after which the oldest snapshot is removed before a new one is created.
	schedule-type	Specifies the timer type for the schedule. Interval schedules specify a delay interval (aka rest interval) between schedule activations and calendar schedules activate at specific days and times. Scheduled snapshot/backup/replication jobs are never run while work from a previous run for the same schedule is still active. [*calendar, interval]
	interval	(interval based) Delay interval in minutes between when a schedule run completes and the next one is started. Minimum schedule delay interval is 3 minutes.
	days	(calendar based) The days of the week on which this schedule should create snapshots. [fri, mon, sat, *sun, thu, tue, wed]
	hours	(calendar based) For the specified days of the week, snapshots will be created at the specified hours. [10am, 10pm, 11am, 11pm, 12am, 12pm, 1am, 1pm, 2am, 2pm, *3am, 3pm, 4am, 4pm, 5am, 5pm, 6am, 6pm, 7am, 7pm, 8am, 8pm, 9am, 9pm]
	offset-minutes	(calendar based) Delay the scheduled start time by specified minutes. For example, a 30min offset with scheduled trigger time of 1am and 4am will trigger at 1:30am and 4:30am respectively.
	rc-hourly	Retention count of hourly checkpoints/snapshots. A retention count of 2 will retain 2 snapshots spanning the last 2 hours.
	rc-dailies	Retention count of daily checkpoints/snapshots. A retention count of 7 will retain 7 snapshots spanning the last week with a minimum of one day spacing between snapshots/checkpoints.
	rc-weeklies	Retention count of weekly checkpoints/snapshots. A retention count of 4 will retain 4 snapshots spanning the last month with a minimum of 7 day spacing between snapshots/checkpoints.
	rc-monthlies	Retention count of monthly checkpoints/snapshots. A retention count of 6 will retain 6 snapshots spanning the last half-year with a minimum of 30 day spacing between snapshots/checkpoints.
	rc-quarterlies	Retention count of quarterly checkpoints/snapshots. A retention count of 4 will retain 4 snapshots spanning a year with a minimum of 90 day spacing between snapshots/checkpoints.
	flags	Optional flags for the operation. [async]

snap-schedule-remove

Removes one or more volumes/shares from the specified schedule.

 qs snap-schedule-remove|sch-remove --schedule=value [--volume-list=value ] [--share-list=value ] 

	schedule	Name of a snapshot schedule or its unique ID (GUID).
	volume-list	A list of one or more storage volumes.
	share-list	A list of one or more network shares.

snap-schedule-trigger

Triggers the specified schedule to run immediately.

 qs snap-schedule-trigger|sch-trigger --schedule=value 

schedule

Name of a snapshot schedule or its unique ID (GUID).

iSCSI/FC/NFS/SMB Session Management [SESSION]

Commands for iSCSI/FC/NFS/SMB storage session management.

Collapse

share-session-get

Returns information about a specific NFS/SMB session.

 qs share-session-get|share-sn-get --share-session=value 

share-session

A network share session represents a NAS client connection/session via the SMB and/or NFS protocol.

share-session-list

Returns a list of all the open NFS and SMB sessions.

 qs share-session-list|share-sn-list [--storage-system=value ] 

storage-system

Name or ID of a storage system in a management grid.

volume-session-close

Forcibly closes the specified iSCSI session; generally not recommended, use acl-remove instead.

 qs volume-session-close|volume-sn-close [--volume=value ] [--session-list=value ] 

	volume	Name of the storage volume or its unique ID (GUID).
	session-list	iSCSI session identifier for an active iSCSI session.

volume-session-get

Returns detailed information on a specific iSCSI session.

 qs volume-session-get|volume-sn-get --session=value 

session

iSCSI session identifier for an active iSCSI session.

volume-session-list

Returns a list of all the active iSCSI sessions.

 qs volume-session-list|volume-sn-list [--volume=value ] [--host=value ] 

	volume	Name of the storage volume or its unique ID (GUID).
	host	Name of the host or its unique ID (GUID).

Network Share Management [SHARE]

Commands for managing Network Shares which are accessible via NFS and/or the SMB protocol.

Collapse

active-dir-domain-list

Returns a list of all domains including the trusted domains.

 qs active-dir-domain-list|ad-dom-list --storage-system=value 

storage-system

Name or ID of a storage system in a management grid.

active-dir-user-group-list

Returns a list of all the users and groups in the Active Directory domain that the appliance is a member of. Search result is limited to 1000 users/groups. Consider narrowing down the search for a list of all users/groups

 qs active-dir-user-group-list|ad-ug-list --storage-system=value [--is-group=value ] [--domain=value ] [--organization-unit=value ] [--filter=value ] [--flags=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	is-group	List active directory users or groups. Default is users
	domain	Search users or groups in the specified domain. If not specified the default domain will be used.
	organization-unit	Search users or groups in the specified organization unit. If not specified, the base domain will be used to search.
	filter	Filter to search users or groups. Example user*dom*. If not specified, all users or groups will be search.
	flags	Optional flags for the operation. [async, force]

share-client-add

Adds a NFS client access rule for the specified network share.

 qs share-client-add|shr-cadd --share=value --filter=value [--async=value ] [--secure=value ] [--subtree=value ] [--rdonly=value ] [--options=value ] [--flags=value ] 

	share	Name or ID of a network share.
	filter	A filter string for the client
	async	Use asynchronous communication between NFS server and client
	secure	Requires the requests to originate from an Internet port less than IPPORT_RESERVED
	subtree	Enables subtree checking
	rdonly	Allow only read requests for the NFS volume
	options	Set of custom NFS options as a comma delimited list such as no_root_squash, wdelay, ro etc
	flags	Optional flags for the operation. [async, force]

share-client-get

Returns information about the specific network share NFS client access rule.

 qs share-client-get|shr-cget --share=value [--filter=value ] [--flags=value ] 

	share	Name or ID of a network share.
	filter	A filter string for the client
	flags	Optional flags for the operation. [async, force]

share-client-list

Returns a list of NFS clients access rules for the specified network share.

 qs share-client-list|shr-clist --share=value [--flags=value ] 

	share	Name or ID of a network share.
	flags	Optional flags for the operation. [async, force]

share-client-modify

Modifies a NFS client access rule for the specified network share.

 qs share-client-modify|shr-cmodify --share=value --filter=value [--rdonly=value ] [--secure=value ] [--async=value ] [--subtree=value ] [--options=value ] [--flags=value ] 

	share	Name or ID of a network share.
	filter	A filter string for the client
	rdonly	Allow only read requests for the NFS volume
	secure	Requires the requests to originate from an Internet port less than IPPORT_RESERVED
	async	Use asynchronous communication between NFS server and client
	subtree	Enables subtree checking
	options	Set of custom NFS options as a comma delimited list such as no_root_squash, wdelay, ro etc
	flags	Optional flags for the operation. [async, force]

share-client-remove

Removes NFS client access rule for the specified network share.

 qs share-client-remove|shr-cremove --share=value --filter=value [--flags=value ] 

	share	Name or ID of a network share.
	filter	A filter string for the client
	flags	Optional flags for the operation. [async, force]

share-clone

Creates a full copy of the specified network share to another storage pool.

 qs share-clone|shr-clone --share=value --pool=value [--name=value ] [--desc=value ] [--active=value ] [--flags=value ] 

	share	Name or ID of a network share.
	pool	Name of the storage pool or its unique ID (GUID).
	name	Name for the clone, if not provided the source volume name will be used as a prefix.
	desc	A description for the object.
	active	Indicates that the network share should be activated.
	flags	Optional flags for the operation. [async, force]

share-create

Creates a new network share accessible via NFS v3/v4 and the SMB protocol.

 qs share-create|shr-create --name=value --pool=value [--desc=value ] [--public=value ] [--active=value ] [--cifs-enable=value ] [--user-access-list=value ] [--cifs-options=value ] [--space-quota=value ] [--space-quota-exclude-snapshots=value ] [--sync=value ] [--compression-type=value ] [--copies=value ] [--disable-snap-browsing=value ] [--share-owner=value ] [--share-owner-group=value ] [--permissions=value ] [--recordsize=value ] [--reserved=value ] [--vvol-type=value ] [--protocol-end-point=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	pool	Name of the storage pool or its unique ID (GUID).
	desc	A description for the object.
	public	Indicates that the specified network share should be made public and open for read/write access to all systems on the network.
	active	Indicates that the network share should be activated.
	cifs-enable	Enables Samba support for network share.
	user-access-list	List of users with permission to access the network share for example 'user1:valid,user2:invalid,user3:none,~DOMAIN+user7,~user33', prepend with tilde (~) to remove fields/properties.
	cifs-options	CIFS/Samba configuration options specified as 'key=value,key2=value2,~key3,...', prepend with tilde (~) to remove fields/properties.
	space-quota	Size of the quota for the network share (optional).
	space-quota-exclude-snapshots	If specified there is no limit on the space utilized by snapshots of the parent share (optional).
	sync	Synchronization policy to use for handling writes to the storage pool (standard, always, none). standard mode is a hybrid of write-through and write-back caching based on the O_SYNC flag, always mode is write-through to ZIL which could be SSD cache, and disabled indicates to always use async writes. [always, disabled, *standard]
	compression-type	off | lzjb | gzip | gzip-[1-9] | zle | lz4)
	copies	Indicates the number of copies of each block should be maintained in the Storage Pool. This is a way of getting duplicates for bit-rot protection on a single device (supported only on ZFS based pools).
	disable-snap-browsing	When this is true, ability to browse snapshot directories over CIFS is disabled.
	share-owner	Name of the share owner
	share-owner-group	Name of the share owner group (Need to specify both share owner and group)
	permissions	Permissions settings for the share in read/write/execute format for user/group/other in the standard UNIX permissions octal format (eg 755) or rwxr--r--
	recordsize	NetworkShare record size in KB, valid values are 8, 16, 32, 64, 128 (default), 256, 512, or 1024. Larger values deliver higher performance for workloads with high sequential IO.
	reserved	Amount of thick-provisioned reserved space for a Storage Volume specified in MiB, GiB, or TiB. examples: 4G, 100M, 1.4T
	vvol-type	vvol type for VASA support. Type can be none for no VASA support, protocolEndPoint or subVol. Default is none. [*none, protocol-end-point, subvol-config, subvol-data, subvol-swap]
	protocol-end-point	Protocol endpoint Id.
	flags	Optional flags for the operation. [async, force]

share-create-alias

Creates an alias for the specified share. Aliases have their own separate permissions settings which can be customized and can inherit from it's associated parent share.

 qs share-create-alias|shr-create-alias --name=value --parent-share=value [--subpath=value ] [--inherit-access=value ] [--desc=value ] [--public=value ] [--active=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	parent-share	The ID or name of the network share to link a given alias or sub-share to.
	subpath	Sub-directory within the parent share to associate with this sub-share. If the directory doesn't exist it will be created automatically and the sub-path can refer to a directory which is nested multiple levels deep.
	inherit-access	Inherit access control settings from the parent share including the NFS access entries and CIFS user/group access entries. [cifs, nfs, *none]
	desc	A description for the object.
	public	Indicates that the specified network share should be made public and open for read/write access to all systems on the network.
	active	Indicates that the network share should be activated.
	flags	Optional flags for the operation. [async, force]

share-delete

Deletes the specified network share

 qs share-delete|shr-delete --share=value [--delete-child-snaps=value ] [--flags=value ] 

	share	Name or ID of a network share.
	delete-child-snaps	Deletes the child snapshots of the specified share/volume.
	flags	Optional flags for the operation. [async, force]

share-disable

Disables/deactivates the specified network share

 qs share-disable|shr-disable --share=value [--flags=value ] 

	share	Name or ID of a network share.
	flags	Optional flags for the operation. [async, force]

share-enable

Enables/activates the specified network share

 qs share-enable|shr-enable --share=value [--flags=value ] 

	share	Name or ID of a network share.
	flags	Optional flags for the operation. [async, force]

share-file-lock-list

Returns a list of all the open files (SMB only) for the specified network share.

 qs share-file-lock-list|shr-lock-list [--share=value ] [--flags=value ] 

	share	Name or ID of a network share.
	flags	Optional flags for the operation. [force]

share-get

Returns information about the specified network share.

 qs share-get|shr-get --share=value 

share

Name or ID of a network share.

share-group-quota-add

Set a group quota for the network share

 qs share-group-quota-add|shr-group-quota-add --share=value --user-group=value --quota-size=value [--flags=value ] 

	share	Name or ID of a network share.
	user-group	A group of one or more users.
	quota-size	Size may be specified in MiB, GiB, or TiB. examples: 4G, 100M, 1.4T
	flags	Optional flags for the operation. [async, force]

share-group-quota-remove

Remove a group quota for the network share

 qs share-group-quota-remove|shr-group-quota-remove --share=value --user-group=value [--flags=value ] 

	share	Name or ID of a network share.
	user-group	A group of one or more users.
	flags	Optional flags for the operation. [async, force]

share-health-check

Checks the health/state of the share and recursively checks the health of the associated pool and it's disk devices to see if there are any health issues anywhere in the stack.

 qs share-health-check|shr-check --share=value [--flags=value ] 

	share	Name or ID of a network share.
	flags	Optional flags for the operation. [min]

share-join-domain

Joins the specified Active Directory domain/realm.

 qs share-join-domain|shr-jdomain --storage-system=value --domain=value --realm=value --kdc=value --ad-admin=value --ad-password=value [--idmap-mode=value ] [--allow-trusted-domains=value ] [--flags=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	domain	The name of the domain to have the QuantaStor system join. (DOMAIN)
	realm	The name of the realm that the domain is in. (DOMAIN.COM)
	kdc	The name of the active directory machine.
	ad-admin	The administrator account of the domain that QuantaStor is a member of.
	ad-password	The password to the administrator account of the domain that QuantaStor is a member of.
	idmap-mode	Specifies the Unix to Active Directory ID mapping mode (idmap config) of rid, autorid, tdb, ad, ad-rfc2307 [ad, ad-rfc2307, autorid, rid, *tdb]
	allow-trusted-domains	Allow discovery of trusted domains (default=false)
	flags	Optional flags for the operation. [async, force]

share-leave-domain

Leaves the current Active Directory domain.

 qs share-leave-domain|shr-ldomain --storage-system=value [--ad-admin=value ] [--ad-password=value ] [--preserve-access-entries=value ] [--flags=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	ad-admin	The administrator account of the domain that QuantaStor is a member of.
	ad-password	The password to the administrator account of the domain that QuantaStor is a member of.
	preserve-access-entries	When a system is removed from an AD domain all local storage pools will have their AD user access control information scrubbed from all Network Shares unless preserve entries is specified. (default=true)
	flags	Optional flags for the operation. [async, force]

share-list

Returns a list of all the network shares in the system.

 qs share-list|shr-list [--vasa-support-only=value ] 

vasa-support-only

VASA support only.

share-modify

Modifies the properties of the specified network share.

 qs share-modify|shr-modify --share=value [--name=value ] [--desc=value ] [--active=value ] [--space-quota=value ] [--space-quota-exclude-snapshots=value ] [--sync=value ] [--compression-type=value ] [--copies=value ] [--cifs-enable=value ] [--user-access-list=value ] [--group-access-list=value ] [--cifs-options=value ] [--disable-snap-browsing=value ] [--share-owner=value ] [--share-owner-group=value ] [--permissions=value ] [--recordsize=value ] [--is-active-checkpoint=value ] [--reserved=value ] [--flags=value ] 

	share	Name or ID of a network share.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	active	Indicates that the network share should be activated.
	space-quota	Size of the quota for the network share (optional).
	space-quota-exclude-snapshots	If specified there is no limit on the space utilized by snapshots of the parent share (optional).
	sync	Synchronization policy to use for handling writes to the storage pool (standard, always, none). standard mode is a hybrid of write-through and write-back caching based on the O_SYNC flag, always mode is write-through to ZIL which could be SSD cache, and disabled indicates to always use async writes. [always, disabled, *standard]
	compression-type	off | lzjb | gzip | gzip-[1-9] | zle | lz4)
	copies	Indicates the number of copies of each block should be maintained in the Storage Pool. This is a way of getting duplicates for bit-rot protection on a single device (supported only on ZFS based pools).
	cifs-enable	Enables Samba support for network share.
	user-access-list	List of users with permission to access the network share for example 'user1:valid,user2:invalid,user3:none,~DOMAIN+user7,~user33', prepend with tilde (~) to remove fields/properties.
	group-access-list	List of groups with permission to access the network share for example 'DOMAIN+group1:valid,~DOMAIN+group2' prepend with tilde (~) to remove access for specific users or groups.
	cifs-options	CIFS/Samba configuration options specified as 'key=value,key2=value2,~key3,...', prepend with tilde (~) to remove fields/properties.
	disable-snap-browsing	When this is true, ability to browse snapshot directories over CIFS is disabled.
	share-owner	Name of the share owner
	share-owner-group	Name of the share owner group (Need to specify both share owner and group)
	permissions	Permissions settings for the share in read/write/execute format for user/group/other in the standard UNIX permissions octal format (eg 755) or rwxr--r--
	recordsize	NetworkShare record size in KB, valid values are 8, 16, 32, 64, 128 (default), 256, 512, or 1024. Larger values deliver higher performance for workloads with high sequential IO.
	is-active-checkpoint	Network Shares and Storage Volumes marked as an active replica checkpoint cannot be replicated over by replication schedules or the replication system. Use is used to protect a given volume/share in the event of site failover to ensure the source side doesn't overwrite replicas at the DR site which are in use. Note: Checkpoints are automatically marked as active replica checkpoints whenever access is granted to them or they are accessed via a file or block storage session.
	reserved	Amount of thick-provisioned reserved space for a Storage Volume specified in MiB, GiB, or TiB. examples: 4G, 100M, 1.4T
	flags	Optional flags for the operation. [async]

share-quota-list

Returns the user quotas for the network share.

 qs share-quota-list|shr-quota-list --share=value [--flags=value ] 

	share	Name or ID of a network share.
	flags	Optional flags for the operation. [async, force]

share-restore

Restores the specified network share with the contents of the specified snapshot.

 qs share-restore|shr-restore --share=value [--flags=value ] 

	share	Name or ID of a network share.
	flags	Optional flags for the operation. [async, force]

share-rollback

Instant rollback of the specified network share to the specified point-in-time snapshot. Rollback is faster than the Restore operation but only works with the most recent snapshot. It use rollback with an earlier snapshot you must first remove those snapshots which were created after the desired rollback point.

 qs share-rollback|shr-rollback --share=value --share-snapshot=value [--flags=value ] 

	share	Name or ID of a network share.
	share-snapshot	Name or ID of a snapshot of a network share.
	flags	Optional flags for the operation. [async, force]

share-snapshot

Creates and instant space efficient snapshot of the specified network share (requires Advanced Storage Pool)

 qs share-snapshot|shr-snap --share=value [--name=value ] [--desc=value ] [--active=value ] [--flags=value ] 

	share	Name or ID of a network share.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	active	Indicates that the network share should be activated.
	flags	Optional flags for the operation. [async, force]

share-user-quota-add

Set a user quota for the network share

 qs share-user-quota-add|shr-user-quota-add --share=value --user=value --quota-size=value [--flags=value ] 

	share	Name or ID of a network share.
	user	Name or ID (GUID) of a existing user.
	quota-size	Size may be specified in MiB, GiB, or TiB. examples: 4G, 100M, 1.4T
	flags	Optional flags for the operation. [async, force]

share-user-quota-remove

Remove a user quota for the network share.

 qs share-user-quota-remove|shr-user-quota-remove --share=value --user=value [--flags=value ] 

	share	Name or ID of a network share.
	user	Name or ID (GUID) of a existing user.
	flags	Optional flags for the operation. [async, force]

Site Cluster Resource Management [SITE]

Configurations with floating IPs such as High-Availability pools and Gluster VIFs first require that a Site Cluster is formed. Site Clusters maintain a heart-beat and control quorum for a subset of nodes so that Virtual Interfaces can be automatically moved between nodes as necessary.

Collapse

cluster-ring-create

Creates a new cluster ring configuration for the specified site. Sites can have multiple rings to improve resiliency of the cluster in the event of a network loss on a specific port or network interface.

 qs cluster-ring-create|cr-create --site=value --member-addresses=value [--ring=value ] [--bind-address=value ] 

	site	A site is a group of appliances in a location.
	member-addresses	IP addresses, one from each appliance, used to form a new cluster ring for cluster communication activities.
	ring	Unique cluster ring number starting with 0 for the first ring in the site.
	bind-address	The bind address represents the network on which cluster communication is allowed for a specific ring.

cluster-ring-delete

Deletes the specified cluster ring configuration.

 qs cluster-ring-delete|cr-delete --cluster-ring=value 

cluster-ring

A cluster ring is a communication channel for heartbeat communication and cluster resource management communication activities. Ideal site configurations have two independent rings each on separate networks. For example, a site configuration may have a cluster ring 0 on 10.0.x.x/16 and ring 1 on 10.1.x.x/16

cluster-ring-get

Returns the details about a specific cluster ring. A ring represents a communication channel for cluster heartbeat communication. Ideal cluster configurations have two rings.

 qs cluster-ring-get|cr-get --cluster-ring=value 

cluster-ring

A cluster ring is a communication channel for heartbeat communication and cluster resource management communication activities. Ideal site configurations have two independent rings each on separate networks. For example, a site configuration may have a cluster ring 0 on 10.0.x.x/16 and ring 1 on 10.1.x.x/16

cluster-ring-list

Returns a list of the cluster ring configurations.

 qs cluster-ring-list|cr-list 

cluster-ring-member-get

Returns information about the specified cluster ring member.

 qs cluster-ring-member-get|crm-get --cluster-ring-member=value 

cluster-ring-member

A cluster-ring-member represents a physical interface on a appliance used for cluster communication.

cluster-ring-member-list

Returns a list of all the cluster ring members of the site.

 qs cluster-ring-member-list|crm-list 

site-cluster-assoc-get

Returns detailed information about the specified site association.

 qs site-cluster-assoc-get|sca-get --system=value [--site-assoc=value ] 

	system	The system with the site association.
	site-assoc	A site association is a link between a system and a site.

site-cluster-assoc-list

Returns a list of all the configured site association.

 qs site-cluster-assoc-list|sca-list 

site-cluster-create

A site represents a group of appliances at a particular location. That location can span buildings but typically represents systems in close proximity to each other.

 qs site-cluster-create|sc-create --name=value --sys-list=value [--desc=value ] [--location=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	sys-list	List of systems to be combined together to form a new site.
	desc	A description for the object.
	location	Optional description indicating the location of the storage system.
	flags	Optional flags for the operation. [async]

site-cluster-delete

Deletes the specified site configuration.

 qs site-cluster-delete|sc-delete --site=value [--flags=value ] 

	site	A site is a group of appliances in a location.
	flags	Optional flags for the operation. [async, force]

site-cluster-get

Returns detailed information about the specified site.

 qs site-cluster-get|sc-get --site=value 

site

A site is a group of appliances in a location.

site-cluster-list

Returns a list of all the configured sites.

 qs site-cluster-list|sc-list 

site-cluster-modify

Modifies the configuration settings of a site like it's name, location or description.

 qs site-cluster-modify|sc-modify --site=value [--name=value ] [--desc=value ] [--location=value ] 

	site	A site is a group of appliances in a location.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	location	Optional description indicating the location of the storage system.

site-cluster-restart-services

Restarts the corosync/pacemaker services on the specified appliance.

 qs site-cluster-restart-services|sc-restart --storage-system=value [--flags=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	flags	Optional flags for the operation. [async, force]

site-vif-create

Creates a new virtual interface for the site. Site virtual interfaces automatically float between appliances/systems to ensure availability of a management IP for a given site.

 qs site-vif-create|svr-create --site=value --parent-port=value --ip-address=value [--netmask=value ] [--mtu=value ] [--grid-vif=value ] 

	site	A site is a group of appliances in a location.
	parent-port	Parent network port like 'eth0' which the virtual interface should be attached. On failover the virtual interface will attach to the port with the same name on another system in the Site Cluster.
	ip-address	IP address of the form x.x.x.x such as 10.0.0.10
	netmask	Subnet IP mask (ex: 255.255.255.0)
	mtu	Maximum transmission unit (MTU) for the target port, commonly set to 9000 to enable jumbo frames.
	grid-vif	When true, this virtual interface will be the gridIP. The gridIP is used for grid master auto election.

site-vif-delete

Deletes the virtual interface site resource and it's associated configuration information from the cluster configuration.

 qs site-vif-delete|svr-delete --vif-resource=value 

vif-resource

A site virtual interface resource.

site-vif-get

Returns the details about the specified virtual interface cluster resource in a site.

 qs site-vif-get|svr-get --vif-resource=value 

vif-resource

A site virtual interface resource.

site-vif-list

Returns a list of all the virtual interface site resources.

 qs site-vif-list|svr-list 

site-vif-move

Moves the virtual interface resource from the current system it is attached to the specified storage system. The target storage system must be a member of th site cluster configuration.

 qs site-vif-move|svr-move --vif-resource=value --move-to-system=value 

	vif-resource	A site virtual interface resource.
	move-to-system	Destination system to move the virtual interface over to.

Storage Provisioning Tier Management [STORAGE-TIER]

Storage Pools can be grouped into a Storage Provisioning Teir to simplify common provisioning tasks by pushing onto the system the task of selecting the optimial storage pool to provision a volume or share from based on the amount of free-space available and allocated.

Collapse

storage-tier-create

Creates a new storage storage tier comprised of the specified storage pools

 qs storage-tier-create|st-create --name=value --pool-list=value [--desc=value ] [--storage-class=value ] [--storage-type=value ] [--perf-level=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	pool-list	List of storage pools.
	desc	A description for the object.
	storage-class	The classification/primary use case of the storage such as Backup/Archive, High-Performance, or General Purpose.
	storage-type	Type of the storage pools included in this tier: SATA, SAS, SSD, SSHD, MULTI, Unknown [AOE, MULTI, *SAS, SATA, SCSI, SSD, SSHD, UNKNOWN]
	perf-level	An estimation of the relative performance of the storage tier as a simplified number in the range of 1 to 100.
	flags	Optional flags for the operation. [async]

storage-tier-delete

Deletes the specified storage storage tier (pools are not deleted).

 qs storage-tier-delete|st-delete --tier=value [--flags=value ] 

	tier	Storage tier is a group of one or more storage pools used to simplify storage provisioning by tier/category/classification.
	flags	Optional flags for the operation. [async, force]

storage-tier-get

Returns information about a specific storage storage tier.

 qs storage-tier-get|st-get --tier=value 

tier

Storage tier is a group of one or more storage pools used to simplify storage provisioning by tier/category/classification.

storage-tier-list

Returns a list of all the storage storage tiers.

 qs storage-tier-list|st-list 

storage-tier-modify

Modifies the name, description or other property of the specified storage tier.

 qs storage-tier-modify|st-modify --tier=value [--name=value ] [--desc=value ] [--storage-class=value ] [--storage-type=value ] [--perf-level=value ] 

	tier	Storage tier is a group of one or more storage pools used to simplify storage provisioning by tier/category/classification.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	storage-class	The classification/primary use case of the storage such as Backup/Archive, High-Performance, or General Purpose.
	storage-type	Type of the storage pools included in this tier: SATA, SAS, SSD, SSHD, MULTI, Unknown [AOE, MULTI, *SAS, SATA, SCSI, SSD, SSHD, UNKNOWN]
	perf-level	An estimation of the relative performance of the storage tier as a simplified number in the range of 1 to 100.

storage-tier-pool-add

Adds one or more pools to the specified storage tier.

 qs storage-tier-pool-add|stp-add --tier=value --pool-list=value 

	tier	Storage tier is a group of one or more storage pools used to simplify storage provisioning by tier/category/classification.
	pool-list	List of storage pools.

storage-tier-pool-remove

Removes one or more pools from the specified storage tier.

 qs storage-tier-pool-remove|stp-remove --tier=value --pool-list=value 

	tier	Storage tier is a group of one or more storage pools used to simplify storage provisioning by tier/category/classification.
	pool-list	List of storage pools.

Software Controller / iSCSI SAN Adapter [SWC]

QuantaStor appliances can use iSCSI storage to form Storage Pools. To configure an appliance to automatically connect to and login to one or more storage appliances to access iSCSI block storage first add and then configure a iSCSI Software Adapter.

Collapse

sw-controller-add

Adds an iSCSI SAN adapter for connecting to the specified iSCSI SAN.

 qs sw-controller-add|swc-add --ip-address=value --name=value --storage-system=value [--desc=value ] [--chap-user=value ] [--chap-pass=value ] 

	ip-address	IP Address of the host being added; if unspecified the service will look it up.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	storage-system	Name or ID of a storage system in a management grid.
	desc	A description for the object.
	chap-user	An optional iSCSI CHAP username.
	chap-pass	An optional iSCSI CHAP password.

sw-controller-autoconfig

Creates all necessary hosts, storage volume assignments and iSCSI SAN adapters required to connect the specified systems to the specified storage volumes.

 qs sw-controller-autoconfig|swc-autoconfig --sys-list=value --volume-list=value 

	sys-list	List of one or more storage systems.
	volume-list	List of one or more storage volumes.

sw-controller-get

Gets detailed information about a specific software SAN controller.

 qs sw-controller-get|swc-get --sw-controller=value 

sw-controller

Specifies the name or ID of a software SAN controller instance.

sw-controller-list

Returns a list of all the configured software SAN adapter/controllers (iSCSI, etc).

 qs sw-controller-list|swc-list 

sw-controller-remove

Removed the specified iSCSI SAN adapter

 qs sw-controller-remove|swc-remove --sw-controller=value 

sw-controller

Specifies the name or ID of a software SAN controller instance.

sw-controller-scan

Scans the specified iSCSI SAN adapter for iSCSI targets.

 qs sw-controller-scan|swc-scan --sw-controller=value 

sw-controller

Specifies the name or ID of a software SAN controller instance.

sw-controller-target

Returns the specified software controller target.

 qs sw-controller-target|swc-target --target=value 

target

The software controller target to operate against

sw-controller-target-list

Returns a list of all the discovered software controller targets.

 qs sw-controller-target-list|swc-target-list [--sw-controller=value ] 

sw-controller

Specifies the name or ID of a software SAN controller instance.

sw-controller-target-login

Logs into the specified targets on the specified iSCSI SAN adapter.

 qs sw-controller-target-login|swc-target-login --sw-controller=value --target-list=value 

	sw-controller	Specifies the name or ID of a software SAN controller instance.
	target-list	The list of targets for the software controller to operate against

sw-controller-target-logout

Logs out of the specified targets on the specified iSCSI SAN adapter.

 qs sw-controller-target-logout|swc-target-logout --sw-controller=value --target-list=value 

	sw-controller	Specifies the name or ID of a software SAN controller instance.
	target-list	The list of targets for the software controller to operate against

sw-disk-session

Returns the specified software disk session.

 qs sw-disk-session|swc-session --session=value 

session

The software disk session to operate against

sw-disk-session-list

Returns a list of all software disk sessions.

 qs sw-disk-session-list|swc-session-list [--sw-controller=value ] 

sw-controller

Specifies the name or ID of a software SAN controller instance.

Object Storage Management [SWIFT]

Commands for S3/SWIFT object storage setup and user management within a QuantaStor managed Ceph cluster.

Collapse

ceph-object-pool-group-create

Creates a new Object Pool Group for the Ceph Cluster to enable S3/SWIFT object storage gateway access.

 qs ceph-object-pool-group-create|cog-create --ceph-cluster=value --name=value [--desc=value ] [--object-store-zone=value ] [--object-store-region=value ] [--pool-type=value ] [--min-replicas=value ] [--max-replicas=value ] [--ceph-pool-profile=value ] [--sys-list=value ] [--use-case=value ] [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	object-store-zone	Ceph object storage zone. (Default: 'default')
	object-store-region	Ceph object storage region. (Default: 'default')
	pool-type	Type of Ceph pool, 'replicated' (mirror based, default) or 'erasure' which is like network RAID5.
	min-replicas	Minimum number of replicas to have of each block while still allowing write access to the Ceph pool.
	max-replicas	Maximum number of replicas (redundancy level) to be created of each block in the Ceph pool.
	ceph-pool-profile	Custom Ceph Pool profile name (unique within a Ceph Cluster) for block or object store.
	sys-list	List of one or more storage systems.
	use-case	Default use case is S3/SWIFT object storage but Openstack based pools may also be created in addition. [*s3, s3+openstack]
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-object-pool-group-delete

Deletes the specified object pool group, WARNING all associated objects in the pool group will be destroyed.

 qs ceph-object-pool-group-delete|cog-delete --ceph-object-pool-group=value [--flags=value ] 

	ceph-object-pool-group	Ceph object storage pool group.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-object-pool-group-get

Returns information about a specific object storage pool group used to store S3/SWIFT object data.

 qs ceph-object-pool-group-get|cog-get --ceph-object-pool-group=value [--flags=value ] 

	ceph-object-pool-group	Ceph object storage pool group.
	flags	Optional flags for the operation. [min]

ceph-object-pool-group-list

Returns a list of all the object storage pool groups.

 qs ceph-object-pool-group-list|cog-list [--ceph-cluster=value ] [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	flags	Optional flags for the operation. [min]

ceph-user-access-entry-create

Creates a new user access key entry to allow S3/SWIFT access to the object storage group.

 qs ceph-user-access-entry-create|cu-create --ceph-cluster=value --name=value --display-name=value [--tenant=value ] [--email=value ] [--s3-access-key=value ] [--s3-secret-key=value ] [--access-permission=value ] [--user=value ] [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	display-name	Display name for the user.
	tenant	Object Storage (Ceph RGW based) users can be grouped into tenant accounts to securely separate object storage bucket visibility and to facilitate charge-back accounting.
	email	An email address of the form 'user@example.com' without the quotes.
	s3-access-key	The access key for accessing your ceph Object store using S3 Interface.(Default: , generated if not specified.)
	s3-secret-key	The secret key for accessing your ceph Object store using S3 Interface.(Default: , generated if not specified.)
	access-permission	Ceph object storage permission (rwx, rw-, ---) [*all, delete, read, write]
	user	Name or ID (GUID) of a existing user.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-user-access-entry-delete

Deletes the specified SWIFT/S3 user access entry.

 qs ceph-user-access-entry-delete|cu-delete --ceph-cluster=value --acl-entry=value [--delete-data=value ] [--key-delete=value ] [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	acl-entry	Ceph object storage user access control entry.
	delete-data	Flag to specify deletion of user data along with this operation. (Default : false)
	key-delete	Flag to specify deletion of user security keys along with this operation. (Default : false)
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-user-access-entry-disable

Disable a previously active/enabled SWIFT/S3 user access entry.

 qs ceph-user-access-entry-disable|cu-disable --acl-entry=value [--flags=value ] 

	acl-entry	Ceph object storage user access control entry.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-user-access-entry-enable

Enable a previously suspended SWIFT/S3 user access entry.

 qs ceph-user-access-entry-enable|cu-enable --acl-entry=value [--flags=value ] 

	acl-entry	Ceph object storage user access control entry.
	flags	Optional flags for the operation. [async, force, min, *none]

ceph-user-access-entry-get

Returns information about a specific object storage S3/SWIFT user access entry.

 qs ceph-user-access-entry-get|cu-get --acl-entry=value [--flags=value ] 

	acl-entry	Ceph object storage user access control entry.
	flags	Optional flags for the operation. [min]

ceph-user-access-entry-list

Returns a list of all the Ceph Object storage user access entries / keys

 qs ceph-user-access-entry-list|cu-list --ceph-cluster=value [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	flags	Optional flags for the operation. [min]

ceph-user-access-entry-modify

Modifies the name and permissions for a object user access S3/SWIFT entry.

 qs ceph-user-access-entry-modify|cu-modify --ceph-cluster=value --acl-entry=value [--display-name=value ] [--email=value ] [--s3-access-key=value ] [--s3-secret-key=value ] [--swift-secret-key=value ] [--user=value ] [--flags=value ] 

	ceph-cluster	Ceph Cluster name or ID.
	acl-entry	Ceph object storage user access control entry.
	display-name	Display name for the user.
	email	An email address of the form 'user@example.com' without the quotes.
	s3-access-key	The access key for accessing your ceph Object store using S3 Interface.(Default: , generated if not specified.)
	s3-secret-key	The secret key for accessing your ceph Object store using S3 Interface.(Default: , generated if not specified.)
	swift-secret-key	The secret key for accessing your ceph Object store using Swift Interface. (Default: , generated if not specified.)
	user	Name or ID (GUID) of a existing user.
	flags	Optional flags for the operation. [async, force, min, *none]

Storage System Management [SYSTEM]

Commands for managing all the appliance centric settings including NTP, DNS servers, hostname, ARP policies, system restart, shutdown and more.

Collapse

enter-system-maintenance

Set the Storage System(s) in Maintenance mode.

 qs enter-system-maintenance|en-maint --sys-list=value [--enter=value ] [--flags=value ] 

	sys-list	List of one or more storage systems.
	enter	Flags to be passed to set one or more subsystem in the Storage System(s) in Maintenance Mode. [*all, ceph, corosync]
	flags	Optional flags for the operation. [async, force, min, *none]

exit-system-maintenance

Get the Storage System(s) out of Maintenance mode.

 qs exit-system-maintenance|ex-maint --sys-list=value [--exit=value ] [--flags=value ] 

	sys-list	List of one or more storage systems.
	exit	Flags to be passed to move one or more subsystem in the Storage System(s) out of Maintenance Mode. [*all, ceph, corosync]
	flags	Optional flags for the operation. [async, force, min, *none]

system-get

Get general information about the storage system.

 qs system-get|sys-get [--storage-system=value ] 

storage-system

Name or ID of a storage system in a management grid.

system-list

Returns a list of all the managed storage systems. This is always a single system unless the system is a member of a management grid.

 qs system-list|sys-list 

system-metadata-recovery-point-list

Returns a list of all the available system metadata recovery points. Recovery points allow you to restore system information such as network, host, users, and other system information from a prior automatic backup.

 qs system-metadata-recovery-point-list|smrp-list [--storage-system=value ] 

storage-system

Name or ID of a storage system in a management grid.

system-modify

Modifies the name and/or description of the storage system.

 qs system-modify|sys-modify --storage-system=value [--name=value ] [--desc=value ] [--location=value ] [--domain=value ] [--search=value ] [--arp-filter-mode=value ] [--bond-mode=value ] [--ext-hostname=value ] [--grid-port=value ] [--ntp-servers=value ] [--dns-servers=value ] [--multipath-autoconfig=value ] [--log-collection=value ] [--eth-naming=value ] [--flags=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	name	Storage system host name may include any alpha-numeric and hyphen '-' characters per IETF format requirements.
	desc	A description for the object.
	location	Optional description indicating the location of the storage system.
	domain	The domain name suffix for your network such as example.com
	search	The default domain search suffix for your network such as example.com
	arp-filter-mode	ARP filtering should be enabled when you have more than one network card on the same network. [*auto, disabled, enabled]
	bond-mode	Round-robin balancing is the default mode but if you are using bonding across switches you must use LACP and have switch infrastructure that supports it. [active-backup, balance-alb, balance-tlb, balance-xor, lacp, lacp-layer34, *round-robin]
	ext-hostname	Specifies the external hostname for the system. This is useful for creating grids of systems in the cloud like in Amazon's EC2.
	grid-port	Designated port for grid communication
	ntp-servers	Comma delimited list of NTP servers to assign to the appliance.
	dns-servers	Comma delimited list of DNS servers to assign to the appliance.
	multipath-autoconfig	When enabled multipathing is automatically configured for devices that support it. [disabled, enabled]
	log-collection	When enabled logs are sent periodically for automatic analysis. [biweekly, monthly, never, weekly]
	eth-naming	Applies either Predictable (Predictable Network Interface Naming/PNIN) port naming convention (ensN, enoN, enpN) or Unified (ethN) port naming convention. Unified (ethN) based naming is the preferred mode for QuantaStor as it applies a consistent naming across systems which is needed for highly available cluster VIF management. [*nochange, predictable, unified]
	flags	Optional flags for the operation. [async, force, min, *none]

system-platform-event

Signal the service with an event.

 qs system-platform-event|sys-pe --event-type=value --event-message=value 

	event-type	The class of event that is being signaled.
	event-message	The message/key of the event to signal.

system-restart

Restarts the entire storage system.

 qs system-restart|restart --sys-list=value [--flags=value ] 

	sys-list	List of one or more storage systems.
	flags	Optional flags for the operation. [async, force, min, *none]

system-shutdown

Shutdown the storage system.

 qs system-shutdown|shutdown --sys-list=value [--service-only=value ] [--flags=value ] 

	sys-list	List of one or more storage systems.
	service-only	Shutdown just the management service and not the system.
	flags	Optional flags for the operation. [async, force, min, *none]

system-signal-manager

Send signal to named manager module.

 qs system-signal-manager|sys-sigmgr --manager-class=value [--storage-system=value ] 

	manager-class	The code/identifier of the manager to receive the signal. [alua, blink, ceph, disk, fabric, firewall, gluster, gridsync, ha, haconn, hardware, hotspare, infiniband, librato, pool, replication, sharenamespace, smart, stats, targetport]
	storage-system	Name or ID of a storage system in a management grid.

system-upgrade

Upgrade to the latest version of the core packages.

 qs system-upgrade|upgrade --sys-list=value [--include-kernel=value ] [--flags=value ] 

	sys-list	List of one or more storage systems.
	include-kernel	Include kernel and driver updates (default=false)
	flags	Optional flags for the operation. [async, force, min, *none]

timezone-list

Lists all the available time zones from the system time zone table.

 qs timezone-list|tz-list [--storage-system=value ] [--search-filter=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	search-filter	Filter the results of the time zone list to match the specified search string.

timezone-set

Sets the time zone for the specified storage appliance.

 qs timezone-set|tz-set --timezone=value [--storage-system=value ] 

	timezone	System time zone, for example 'America/Los_Angeles'
	storage-system	Name or ID of a storage system in a management grid.

tunable-get

Returns the value of a specific tunable for the specified system.

 qs tunable-get|sst-get --tunable=value [--storage-system=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	tunable	A storage system tunable setting for adjusting various performance settings. When setting a series of tunables in a list provide a comma delimited list in the format key:value,key:value,...

tunable-list

Returns a list of all the system performance tunables which can be used to adjust cache and other settings for specific use cases.

 qs tunable-list|sst-list [--storage-system=value ] 

storage-system

Name or ID of a storage system in a management grid.

tunable-profile-apply

Applies the specified storage system tuning profile.

 qs tunable-profile-apply|sstp-apply --tunable-profile=value [--storage-system=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	tunable-profile	Storage system tunable profiles are a collection of tunable settings that are applied as a set to meet the requirements of a specific system, application, and/or workload.

tunable-profile-create

Creates a new storage system tuning profile with the specified list of tunables.

 qs tunable-profile-create|sstp-create --name=value --desc=value --tunable=value 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	tunable	A storage system tunable setting for adjusting various performance settings. When setting a series of tunables in a list provide a comma delimited list in the format key:value,key:value,...

tunable-profile-delete

Deletes the specified storage system tuning profile.

 qs tunable-profile-delete|sstp-delete --tunable-profile=value 

tunable-profile

Storage system tunable profiles are a collection of tunable settings that are applied as a set to meet the requirements of a specific system, application, and/or workload.

tunable-profile-get

Returns information about the specified profile.

 qs tunable-profile-get|sstp-get --tunable-profile=value 

tunable-profile

Storage system tunable profiles are a collection of tunable settings that are applied as a set to meet the requirements of a specific system, application, and/or workload.

tunable-profile-list

Returns a list of all the storage system tuning profiles.

 qs tunable-profile-list|sstp-list 

tunable-profile-modify

Modifies the specified storage system tuning profile.

 qs tunable-profile-modify|sstp-modify --tunable-profile=value [--name=value ] [--desc=value ] [--tunable=value ] 

	tunable-profile	Storage system tunable profiles are a collection of tunable settings that are applied as a set to meet the requirements of a specific system, application, and/or workload.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	tunable	A storage system tunable setting for adjusting various performance settings. When setting a series of tunables in a list provide a comma delimited list in the format key:value,key:value,...

tunable-set

Sets the value of a specific tunable for the specified system.

 qs tunable-set|sst-set --tunable=value [--storage-system=value ] [--tunable-option=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	tunable-option	Options for setting or resetting all tunables for a given need like IOPS, resilvering, and system defaults. [*none, reset]
	tunable	A storage system tunable setting for adjusting various performance settings. When setting a series of tunables in a list provide a comma delimited list in the format key:value,key:value,...

Storage System Replication Link Management [SYSTEM-LINK]

Storage System Links are a required prerequisite before remote-replication and replication schedules can be formed to move data between any given pair of appliances in a grid.

Collapse

replication-link-create

Create a new storage system link so that storage volumes may be replicated between storage systems.

 qs replication-link-create|rl-create --storage-system=value --remote-system=value --local-ip=value --remote-ip=value [--bw-limit=value ] [--compression=value ] [--encryption=value ] [--desc=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	remote-system	Name or ID of a storage system in a management grid.
	local-ip	IP Address of the host being added; if unspecified the service will look it up.
	remote-ip	IP Address of the host being added; if unspecified the service will look it up.
	bw-limit	Limits the replication bandwidth between two storage systems to a set level specified in units of megabytes per second (MB/sec). All replication activity using the specified link will be evenly load balanced to a sum total throughput of the specified value.Specify 0 to indicate to use the default limit which is 100MB/sec.
	compression	Links always transmit data on-the-wire using fast compression (zip based)
	encryption	Links always transmit data on-the-wire with AES-256 bit encryption by default
	desc	A description for the object.

replication-link-delete

Delete an existing replication link.

 qs replication-link-delete|rl-delete --link=value 

link

Storage system link ID or name.

replication-link-get

Get information about the replication link.

 qs replication-link-get|rl-get --link=value 

link

Storage system link ID or name.

replication-link-list

List the existing replication links.

 qs replication-link-list|rl-list 

replication-link-modify

Modify the properties of the replication link.

 qs replication-link-modify|rl-modify --link=value --remote-ip=value [--local-ip=value ] [--bw-limit=value ] [--compression=value ] [--encryption=value ] [--desc=value ] 

	link	Storage system link ID or name.
	local-ip	IP Address of the host being added; if unspecified the service will look it up.
	remote-ip	IP Address of the host being added; if unspecified the service will look it up.
	bw-limit	Limits the replication bandwidth between two storage systems to a set level specified in units of megabytes per second (MB/sec). All replication activity using the specified link will be evenly load balanced to a sum total throughput of the specified value.Specify 0 to indicate to use the default limit which is 100MB/sec.
	compression	Links always transmit data on-the-wire using fast compression (zip based)
	encryption	Links always transmit data on-the-wire with AES-256 bit encryption by default
	desc	A description for the object.

Tag/Object Property Management [TAG]

Feature which allows any object within the QuantaStor system to be tagged with user custom properties (key/value pairs). Tagging is often used to facilitate multi-tenancy deployments by applying tags containing unique IDs which identify users, customers, account, tenants and more.

Collapse

tag-delete

Deletes a specific tag on a specific object.

 qs tag-delete|prop-delete --object-id=value --tag=value 

	object-id	UUID of the object to associate the tag with.
	tag	Name of the tag/key for the object property. Tags are used to add custom user metadata to objects which is especially important for multi-tenant environments.

tag-get

Returns information on a specific tag on a specific object.

 qs tag-get|prop-get --object-id=value --tag=value 

	object-id	UUID of the object to associate the tag with.
	tag	Name of the tag/key for the object property. Tags are used to add custom user metadata to objects which is especially important for multi-tenant environments.

tag-list

Lists all the tags for the object with the specified object UUID.

 qs tag-list|prop-list --object-id=value 

object-id

UUID of the object to associate the tag with.

tag-set

Adds a new tag/property to the specified object, use a value of hyphen '-' to clear a previously set value.

 qs tag-set|prop-set --object-id=value --tag=value --value=value [--value-type=value ] [--object-type=value ] 

	object-id	UUID of the object to associate the tag with.
	tag	tag
	value	value
	value-type	value-type [float, int, *string, time]
	object-type	object-type [disk, host, pool, share, user, user-group, *volume]

Network Interface Management [TARGET-PORT]

Commands for configuration, management and monitoring of network ports, teaming/bonding, VLAN configuration and more.

Collapse

bonded-interface-create

Creates a bonded network interface by bonding/teaming together a group of one or more physical network ports.

 qs bonded-interface-create|bond-create --ip-address=value --port-list=value [--storage-system=value ] [--netmask=value ] [--gateway=value ] [--mtu=value ] [--desc=value ] [--bond-mode=value ] [--flags=value ] 

	ip-address	IP Address of the host being added; if unspecified the service will look it up.
	port-list	List of target ports to be bonded together.
	storage-system	Name or ID of a storage system in a management grid.
	netmask	Subnet IP mask (ex: 255.255.255.0)
	gateway	IP address of the network gateway
	mtu	Maximum transmission unit (MTU) for the target port, commonly set to 9000 to enable jumbo frames.
	desc	A description for the object.
	bond-mode	Round-robin balancing is the default mode but if you are using bonding across switches you must use LACP and have switch infrastructure that supports it. [active-backup, balance-alb, balance-tlb, balance-xor, lacp, lacp-layer34, *round-robin]
	flags	Optional flags for the operation. [async, force, min, *none]

bonded-interface-delete

Deletes the specified bonded network interface.

 qs bonded-interface-delete|bond-delete --port=value 

port

Name of unique ID of a physical network port/target port.

fiber-channel-port-disable

Disables the specified fiber channel port.

 qs fiber-channel-port-disable|fcp-disable --port=value [--flags=value ] 

	port	Name or MAC address of the target port.
	flags	Optional flags for the operation. [async, force, min, *none]

fiber-channel-port-enable

Enables the specified fiber channel port.

 qs fiber-channel-port-enable|fcp-enable --port=value [--flags=value ] 

	port	Name or MAC address of the target port.
	flags	Optional flags for the operation. [async, force, min, *none]

fiber-channel-port-get

Returns information about the specified fiber channel target port.

 qs fiber-channel-port-get|fcp-get --port=value [--flags=value ] 

	port	Name or MAC address of the target port.
	flags	Optional flags for the operation. [min]

fiber-channel-port-list

Returns a list of all the fiber channel target ports in the system.

 qs fiber-channel-port-list|fcp-list 

infiniband-port-get

Returns information about the specified infiniband port.

 qs infiniband-port-get|ibp-get --port=value [--flags=value ] 

	port	Name or MAC address of the target port.
	flags	Optional flags for the operation. [min]

infiniband-port-list

Returns a list of all the infiniband ports in the system.

 qs infiniband-port-list|ibp-list 

network-port-disable

Disables the specified target port.

 qs network-port-disable|np-disable --port=value [--flags=value ] 

	port	Name or MAC address of the target port.
	flags	Optional flags for the operation. [async, force, min, *none]

network-port-enable

Enables the specified target port.

 qs network-port-enable|np-enable --port=value [--flags=value ] 

	port	Name or MAC address of the target port.
	flags	Optional flags for the operation. [async, force, min, *none]

network-port-get

Returns information about the specified target port.

 qs network-port-get|np-get --port=value [--flags=value ] 

	port	Name or MAC address of the target port.
	flags	Optional flags for the operation. [min]

network-port-list

Returns a list of all the target ports in the system.

 qs network-port-list|np-list 

network-port-modify

Modifies target port settings including IP address, gateway, mtu, etc.

 qs network-port-modify|np-modify --port=value [--port-type=value ] [--ip-address=value ] [--netmask=value ] [--gateway=value ] [--mtu=value ] [--iscsi-enable=value ] [--object-gateway-enable=value ] [--desc=value ] [--float-list=value ] [--bond-mode=value ] [--flags=value ] 

	port	Name or MAC address of a target port, or 'all' to modify all ports.
	port-type	Port configuration type. (static, dhcp)
	ip-address	IP Address of the host being added; if unspecified the service will look it up.
	netmask	Subnet IP mask (ex: 255.255.255.0)
	gateway	IP address of the network gateway
	mtu	Maximum transmission unit (MTU) for the target port, commonly set to 9000 to enable jumbo frames.
	iscsi-enable	Enables or disables iSCSI access to the specified port(s).
	object-gateway-enable	Enables/disables access to the port via S3/SWIFT for object storage deployments. WARNING, turning on object storage access will block management access to the web UI for that IP address!
	desc	A description for the object.
	float-list	List of physical ports and/or bonded ports that the virtual interface is allowed to float between. If a physical port goes offline the system will automatically float the virtual interface to one of the online physical ports in the float list.
	bond-mode	Round-robin balancing is the default mode but if you are using bonding across switches you must use LACP and have switch infrastructure that supports it. [active-backup, balance-alb, balance-tlb, balance-xor, lacp, lacp-layer34, *round-robin]
	flags	Optional flags for the operation. [async, force, min, *none]

network-port-rescan

Discovers new target ports and/or any manual modifications made to the configuration of the target ports.

 qs network-port-rescan|np-rescan [--storage-system=value ] [--flags=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	flags	Optional flags for the operation. [async, force, min, *none]

network-port-restart

Restarts the specified target port.

 qs network-port-restart|np-restart --port=value [--flags=value ] 

	port	Name or MAC address of the target port.
	flags	Optional flags for the operation. [async, force, min, *none]

provider-app-list

List the registered providers.

 qs provider-app-list|prov-app-list [--flags=value ] 

flags

Optional flags for the operation. [async, force, min, *none]

provider-app-register

Register a provider.

 qs provider-app-register|prov-app-register --provider-type=value [--storage-system=value ] [--flags=value ] 

	storage-system	Name or ID of a storage system in a management grid.
	provider-type	Provider type to register. [*none, vmware-vasa]
	flags	Optional flags for the operation. [async, force, min, *none]

provider-app-unregister

Unregister a provider.

 qs provider-app-unregister|prov-app-unregister [--provider-app=value ] [--flags=value ] 

	provider-app	Provider to unregister.
	flags	Optional flags for the operation. [async, force, min, *none]

storage-system-capabilities-list

List the storage system capabilities.

 qs storage-system-capabilities-list|sys-capabilities-list 

virtual-interface-create

Creates a new virtual network interface which is linked to a physical network port.

 qs virtual-interface-create|vif-create --parent-port=value --ip-address=value [--storage-system=value ] [--netmask=value ] [--gateway=value ] [--float-list=value ] [--mtu=value ] [--desc=value ] [--flags=value ] 

	parent-port	Port that the virtual interface should initially be attached to.
	ip-address	IP Address of the host being added; if unspecified the service will look it up.
	storage-system	Name or ID of a storage system in a management grid.
	netmask	Subnet IP mask (ex: 255.255.255.0)
	gateway	IP address of the network gateway
	float-list	List of physical ports and/or bonded ports that the virtual interface is allowed to float between. If a physical port goes offline the system will automatically float the virtual interface to one of the online physical ports in the float list.
	mtu	Maximum transmission unit (MTU) for the target port, commonly set to 9000 to enable jumbo frames.
	desc	A description for the object.
	flags	Optional flags for the operation. [async, force, min, *none]

virtual-interface-delete

Deletes the specified virtual network interface.

 qs virtual-interface-delete|vif-delete --port=value 

port

Name of unique ID of a physical network port/target port.

virtual-interface-move

Moves the specified virtual network interface to a different physical network port.

 qs virtual-interface-move|vif-move --vif=value --port=value 

	vif	Name of unique ID (GUID) for the virtual interface.
	port	Name of unique ID of a physical network port/target port.

vlan-interface-create

Creates a new VLAN interface on the specified physical port.

 qs vlan-interface-create|vlan-create --parent-port=value --ip-address=value --vlan-id=value [--storage-system=value ] [--netmask=value ] [--gateway=value ] [--vlan-qos=value ] [--mtu=value ] [--desc=value ] [--flags=value ] 

	parent-port	Port that the virtual interface should initially be attached to.
	ip-address	IP Address of the host being added; if unspecified the service will look it up.
	vlan-id	VLAN ID (typically 1-255)
	storage-system	Name or ID of a storage system in a management grid.
	netmask	Subnet IP mask (ex: 255.255.255.0)
	gateway	IP address of the network gateway
	vlan-qos	VLAN Quality of Service (QoS) can be in the range of 0 (lowest, default) to 7 (highest) and represents the Class of Service (CoS) user priority of the VLAN traffic.
	mtu	Maximum transmission unit (MTU) for the target port, commonly set to 9000 to enable jumbo frames.
	desc	A description for the object.
	flags	Optional flags for the operation. [async, force, min, *none]

vlan-interface-delete

Deletes the specified VLAN interface.

 qs vlan-interface-delete|vlan-delete --port=value 

port

Name of unique ID of a physical network port/target port.

Task Management [TASK]

Every configuration operation done within an appliance or across a group of appliances is represented in the system as a Task. Some long running tasks can be canceled while running and all tasks from all systems in a grid are visible and monitorable from all appliances.

Collapse

task-cancel

Cancels the specified task that is in the queue or is running.

 qs task-cancel|t-cancel --task=value 

task

ID of a task.

task-clear-all

Clears all the completed and/or failed tasks from the task log so that only the running and queued tasks (if any) remain.

 qs task-clear-all|t-clear-all 

task-get

Returns information about the specified task.

 qs task-get|t-get --task=value 

task

ID of a task.

task-list

Returns a list of all the tasks including active, completed, and failed tasks. Whenever you run a command in QuantaStor it is queued in the task manager and then executed automatically once the necessary resource locks are acquired. This means that you can run commands synchronously and/or asynchronously to run multiple operations concurrently. By default the CLI waits for the task to complete so it blocks by default. You can have the CLI not wait by specifying the 'async' flag to any operation. In such cases the CLI will return immediately.

 qs task-list|t-list [--filtered=value ] 

filtered

Returns just the 'value' most recently created.

task-lock-list

Returns a list of internal task object locks for the specified storage system.

 qs task-lock-list|tl-list [--storage-system=value ] 

storage-system

Name or ID of a storage system in a management grid.

task-lock-release

Releases the specified internal task object locks on the specified storage system (internal support use only, --force flag required).

 qs task-lock-release|tl-release --task=value [--storage-system=value ] [--flags=value ] 

	task	ID of a task.
	storage-system	Name or ID of a storage system in a management grid.
	flags	Optional flags for the operation. [force]

task-proceed

Some tasks (e.g., volume-snapshot) can wait for a signal part-way through the task before proceeding. In the case of volume snapshot tasks this can be used to shorten the snapshot quiesce window.

 qs task-proceed|t-proceed --task=value [--wait-for-signal=value ] 

	task	ID of a task.
	wait-for-signal	Some tasks (volume-snapshot) have the ability to wait for a signal at a key point before proceeding. To signal the task to proceed once started use 'task-proceed'.

Trace Level Management [TRACE-LEVEL]

Debugging facility used to increase the amount of information sent to the /var/log/qs_service.log

Collapse

trace-level-get

Get the current trace level that is being used for logging.

 qs trace-level-get|tl-get 

trace-level-modify

Modify the current parameters used for logging.

 qs trace-level-modify|tl-modify [--trace-level=value ] [--stdout=value ] [--trace-filter=value ] [--trace-options=value ] 

	trace-level	This is the trace level you would like the system to use for logging. [always, critical, debug, debug2, *error, info, verbose, warning]
	stdout	Whether or not the traces should also be logged to stdout
	trace-filter	Specific classes that you would like to have elevated trace levels
	trace-options	Specific options for tracing [enable-cpuinfo,disable-cpuinfo,enable-meminfo,disable-meminfo,enable-calllog,disable-calllog,enable-eventlog,disable-eventlog]

User Management [USER]

User management within an appliance is used both to facilitate access to appliance management operations as well as to create local user accounts to provide SMB access to Network Shares. Use the System Monitor role to limit users so that they cannot change the configuration of any aspect of the system except their own password.

Collapse

user-add

Adds a new user account to the system. A matching console level account is created on all grid nodes but by default SSH access is not allowed. Rather, management accounts do allow the use of qs CLI commands and QuantaStor web management interface access as per the limits of the assigned user role.

 qs user-add|u-add --name=value --password=value --role=value [--first-name=value ] [--last-name=value ] [--email=value ] [--desc=value ] [--default-chap-user=value ] [--default-chap-pass=value ] [--uid=value ] [--gid=value ] [--cli-auth=value ] [--alerts=value ] [--account-type=value ] [--disable-wui-tabs=value ] [--disable-wui-sections=value ] [--hours-term=value ] [--enable-mfa=value ] [--mfa-config=value ] 

	name	User names may include any alpha-numeric plus '_' and '-' characters; spaces are not allowed.
	password	A password for the user to use when accessing the QuantaStor management interface.
	role	Name of a security role or its unique ID (GUID).
	first-name	User's first name: enclose in double-quotes if it contains spaces.
	last-name	User's last name: enclose in double-quotes if it contains spaces.
	email	An email address of the form 'user@example.com' without the quotes.
	desc	A description for the object.
	default-chap-user	Default CHAP username for storage volumes owned by a user account which have the CHAP policy set to 'use user default CHAP settings'
	default-chap-pass	Default CHAP password for storage volumes owned by a user account which have the CHAP policy set to 'use user default CHAP settings'
	uid	POSIX user ID to be associated with the specified user account. New files and directories created within Network Shares via NFS/SMB by this user will be associated with this UID.
	gid	POSIX group ID to be associated with the specified user account. New files and directories created within Network Shares via NFS/SMB by this user will be associated with this GID.
	cli-auth	Allow the root user account within a QuantaStor appliance to use token based authentication to use this account without having to supply a plain-text password.
	alerts	Alert types to subscribe to. Alerts at the subscribed level are sent to the user's email address automatically when a SMTP server is configured. [critical, error, info, *none, warning]
	account-type	Specifies the account type where standard accounts are the default and emergency/temporary account types are for short-term special situations (see NIST 800-53). These accounts automatically terminate after a specified number of hours. [emergency, *standard, temporary]
	disable-wui-tabs	Disables specified tabs in the QuantaStor web management interface. This is useful for hiding unused features and/or simplifying the user interface for administrators assigned with specific tasks. [cloud-containers, cluster-resource-mgmt, multitenancy, *none, remote-replication, scaleout-nas-mgmt, scaleout-object-mgmt, users-groups]
	disable-wui-sections	Disables specified expandable sections in the left-hand side of the QuantaStor web management interface. This is useful for hiding unused features and/or simplifying the user interface for administrators assigned with specific tasks. [hardware, hosts, network-shares, *none, physical-disks, snapshot-schedules, storage-pools, storage-volumes]
	hours-term	Hours until the account is auto-terminated. On termination emergency accounts are locked and temporary accounts are removed/deleted. Unlocking a locked emergency account will add 24 hours to the termination date.
	enable-mfa	Enable Multi Factor Authentication for this user at login.
	mfa-config	Name or ID of a multi-factor authentication configuration.

user-app-token-add

Adds a user app token.

 qs user-app-token-add|u-app-tkn-add --user=value --name=value --app-key=value [--date-token-expires=value ] [--read-only-token=value ] [--user-app-token-access-mode=value ] 

	user	Name or ID (GUID) of a existing user.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	app-key	Application provider key
	date-token-expires	Date on which the token expires.
	read-only-token	User app token is read only. Default is read/write
	user-app-token-access-mode	User app token access mode. [Disabled, *Local only, Remote and Local, Remote only]

user-app-token-delete

Removes a user app token.

 qs user-app-token-delete|u-app-tkn-delete --user-app-token=value 

user-app-token

User app token.

user-app-token-get

Gets information about the specified user app token.

 qs user-app-token-get|u-app-tkn-get --user-app-token=value 

user-app-token

User app token.

user-app-token-list

Returns a list of user app tokens.

 qs user-app-token-list|u-app-tkn-list 

user-app-token-regen

Regenerates a user app token.

 qs user-app-token-regen|u-app-tkn-regen --user-app-token=value [--date-token-expires=value ] [--read-only-token=value ] [--user-app-token-access-mode=value ] 

	user-app-token	User app token.
	date-token-expires	Date on which the token expires.
	read-only-token	User app token is read only. Default is read/write
	user-app-token-access-mode	User app token access mode. [Disabled, *Local only, Remote and Local, Remote only]

user-get

Gets information about the specified user.

 qs user-get|u-get --user=value 

user

Name or ID (GUID) of a existing user.

user-list

Returns a list of all the users.

 qs user-list|u-list 

user-modify

Modifies the specified user name, multi-factor authentication settings, role, and/or description.

 qs user-modify|u-modify --user=value [--role=value ] [--desc=value ] [--default-chap-user=value ] [--default-chap-pass=value ] [--uid=value ] [--gid=value ] [--lock-account=value ] [--cli-auth=value ] [--alerts=value ] [--disable-wui-tabs=value ] [--disable-wui-sections=value ] [--enable-mfa=value ] [--mfa-config=value ] 

	user	Name or ID (GUID) of a existing user.
	role	Name of a security role or its unique ID (GUID).
	desc	A description for the object.
	default-chap-user	Default CHAP username for storage volumes owned by a user account which have the CHAP policy set to 'use user default CHAP settings'
	default-chap-pass	Default CHAP password for storage volumes owned by a user account which have the CHAP policy set to 'use user default CHAP settings'
	uid	POSIX user ID to be associated with the specified user account. New files and directories created within Network Shares via NFS/SMB by this user will be associated with this UID.
	gid	POSIX group ID to be associated with the specified user account. New files and directories created within Network Shares via NFS/SMB by this user will be associated with this GID.
	lock-account	Set to 'true' to lock the account, 'false' to unlock the user account.
	cli-auth	Allow the root user account within a QuantaStor appliance to use token based authentication to use this account without having to supply a plain-text password.
	alerts	Alert types to subscribe to. Alerts at the subscribed level are sent to the user's email address automatically when a SMTP server is configured. [critical, error, info, *none, warning]
	disable-wui-tabs	Disables specified tabs in the QuantaStor web management interface. This is useful for hiding unused features and/or simplifying the user interface for administrators assigned with specific tasks. [cloud-containers, cluster-resource-mgmt, multitenancy, *none, remote-replication, scaleout-nas-mgmt, scaleout-object-mgmt, users-groups]
	disable-wui-sections	Disables specified expandable sections in the left-hand side of the QuantaStor web management interface. This is useful for hiding unused features and/or simplifying the user interface for administrators assigned with specific tasks. [hardware, hosts, network-shares, *none, physical-disks, snapshot-schedules, storage-pools, storage-volumes]
	enable-mfa	Enable Multi Factor Authentication for this user at login.
	mfa-config	Name or ID of a multi-factor authentication configuration.

user-password-set

Changes the password for the specified user

 qs user-password-set|passwd --user=value --new-password=value [--old-password=value ] 

	user	Name or ID (GUID) of a existing user.
	new-password	New password for the user.
	old-password	Old password for the user.

user-remove

Removes the specified user identified by name or ID.

 qs user-remove|u-remove --user=value 

user

Name or ID (GUID) of a existing user.

User Group Management [USER-GROUP]

Users can be grouped together to simplify management of Resource Groups.

Collapse

user-group-create

Creates a new storage user group comprised of the specified users.

 qs user-group-create|ug-create --name=value [--user-list=value ] [--desc=value ] [--flags=value ] [--gid=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	user-list	A list of one or more users.
	desc	A description for the object.
	flags	Optional flags for the operation. [async]
	gid	POSIX group ID to be associated with the specified user account. New files and directories created within Network Shares via NFS/SMB by this user will be associated with this GID.

user-group-delete

Deletes a storage user group, the users are not deleted unless the delete-users flag is set.

 qs user-group-delete|ug-delete --user-group=value [--flags=value ] 

	user-group	A group of one or more users.
	flags	Optional flags for the operation. [async, force]

user-group-get

Returns information about a specific storage user group.

 qs user-group-get|ug-get --user-group=value 

user-group

A group of one or more users.

user-group-list

Returns a list of all the storage user groups.

 qs user-group-list|ug-list 

user-group-modify

Modifies the name and/or description of a storage user group.

 qs user-group-modify|ug-modify --user-group=value [--name=value ] [--desc=value ] [--gid=value ] 

	user-group	A group of one or more users.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	gid	POSIX group ID to be associated with the specified user account. New files and directories created within Network Shares via NFS/SMB by this user will be associated with this GID.

user-group-user-add

Adds one or more users to the specified user group.

 qs user-group-user-add|ugu-add --user-group=value --user-list=value 

	user-group	A group of one or more users.
	user-list	A list of one or more users.

user-group-user-remove

Removes one or more users from the specified user group

 qs user-group-user-remove|ugu-remove --user-group=value --user-list=value 

	user-group	A group of one or more users.
	user-list	A list of one or more users.

Storage Volume Management [VOLUME]

Commands for the management of Storage Volumes which are block devices which can be presented to Hosts via the iSCSI and/or FC protocols.

Collapse

volume-clone

Creates a complete block copy of the source volume.

 qs volume-clone|v-clone --volume=value [--pool=value ] [--name=value ] [--desc=value ] [--access-mode=value ] [--flags=value ] 

	volume	Name of the storage volume or its unique ID (GUID).
	pool	Name of the storage pool or its unique ID (GUID).
	name	Name for the clone, if not provided the source volume name will be used as a prefix.
	desc	A description for the object.
	access-mode	Access mode for the volume. [none, readonly, *readwrite]
	flags	Optional flags for the operation. [async, force]

volume-create

Creates a new storage volume in the specified storage pool.

 qs volume-create|v-create --name=value --size=value --pool=value [--desc=value ] [--percent-reserved=value ] [--access-mode=value ] [--chap-policy=value ] [--chap-user=value ] [--chap-pass=value ] [--count=value ] [--blocksize=value ] [--qos-policy=value ] [--sync=value ] [--compression-type=value ] [--copies=value ] [--reserved=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	size	Size may be specified in MiB, GiB, or TiB. examples: 4G, 100M, 1.4T
	pool	Name of the storage pool or its unique ID (GUID).
	desc	A description for the object.
	percent-reserved	Percentage of the storage volume's total size that should be set aside as reserved space deducted from the pool's free-space (default is 0)
	access-mode	Access mode for the volume. [none, readonly, *readwrite]
	chap-policy	CHAP setting can be 'target' which is unique to a storage volume, 'user' or 'resource-group' which inherits the chap user/pass from your user account or tenant resource cloud respectively. [cloud-defaults, *disabled, target, user-defaults]
	chap-user	An optional iSCSI CHAP username.
	chap-pass	An optional iSCSI CHAP password.
	count	The number of volumes to create, default is 1.
	blocksize	Volume block size in KB, valid values are 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024. Larger values deliver higher performance for workloads with high sequential IO. Default value is 8K
	qos-policy	Specifies the name or ID of a Quality of Service (QoS) policy. QoS policies limit the throughput and IOPs of a storage volume which is especially useful in multi-tenant environments.
	sync	Synchronization policy to use for handling writes to the storage pool (standard, always, none). standard mode is a hybrid of write-through and write-back caching based on the O_SYNC flag, always mode is write-through to ZIL which could be SSD cache, and disabled indicates to always use async writes. [always, disabled, *standard]
	compression-type	off | lzjb | gzip | gzip-[1-9] | zle | lz4)
	copies	Indicates the number of copies of each block should be maintained in the Storage Pool. This is a way of getting duplicates for bit-rot protection on a single device (supported only on ZFS based pools).
	reserved	Amount of thick-provisioned reserved space for a Storage Volume specified in MiB, GiB, or TiB. examples: 4G, 100M, 1.4T
	flags	Optional flags for the operation. [async, force]

volume-create-passthru

Creates a new storage volume using a raw device which is simply passed through to form a storage volume.

 qs volume-create-passthru|v-create-passthru --name=value --disk-list=value [--desc=value ] [--access-mode=value ] [--chap-policy=value ] [--chap-user=value ] [--chap-pass=value ] [--blocksize=value ] [--qos-policy=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	disk-list	Comma delimited (no spaces) list of drives to be used for the operation.
	desc	A description for the object.
	access-mode	Access mode for the volume. [none, readonly, *readwrite]
	chap-policy	CHAP setting can be 'target' which is unique to a storage volume, 'user' or 'resource-group' which inherits the chap user/pass from your user account or tenant resource cloud respectively. [cloud-defaults, *disabled, target, user-defaults]
	chap-user	An optional iSCSI CHAP username.
	chap-pass	An optional iSCSI CHAP password.
	blocksize	Volume block size in KB, valid values are 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024. Larger values deliver higher performance for workloads with high sequential IO. Default value is 8K
	qos-policy	Specifies the name or ID of a Quality of Service (QoS) policy. QoS policies limit the throughput and IOPs of a storage volume which is especially useful in multi-tenant environments.
	flags	Optional flags for the operation. [async, force]

volume-delete

Deletes a storage volume, *WARNING* any data in the volume will be lost.

 qs volume-delete|v-delete --volume=value [--delete-child-snaps=value ] [--flags=value ] 

	volume	Name of the storage volume or its unique ID (GUID).
	delete-child-snaps	Deletes the child snapshots of the specified share/volume.
	flags	Optional flags for the operation. [async, force]

volume-get

Returns information about a specific storage volume.

 qs volume-get|v-get --volume=value 

volume

Name of the storage volume or its unique ID (GUID).

volume-health-check

Checks the health/state of the volume and recursively checks the health of the associated pool and it's disk devices to see if there are any health issues anywhere in the stack.

 qs volume-health-check|v-check --volume=value [--flags=value ] 

	volume	Name of the storage volume or its unique ID (GUID).
	flags	Optional flags for the operation. [min]

volume-list

Returns a list of all the storage volumes.

 qs volume-list|v-list 

volume-modify

Modifies a the name, description or other properties of the storage volume.

 qs volume-modify|v-modify --volume=value [--name=value ] [--desc=value ] [--access-mode=value ] [--flags=value ] [--chap-policy=value ] [--chap-user=value ] [--chap-pass=value ] [--clear-snap-flag=value ] [--enable-wb-cache=value ] [--is-active-checkpoint=value ] [--sync=value ] [--compression-type=value ] [--copies=value ] [--qos-policy=value ] [--reserved=value ] 

	volume	Name of the storage volume or its unique ID (GUID).
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.
	access-mode	Access mode for the volume. [none, readonly, *readwrite]
	flags	Optional flags for the operation. [async]
	chap-policy	CHAP setting can be 'target' which is unique to a storage volume, 'user' or 'resource-group' which inherits the chap user/pass from your user account or tenant resource cloud respectively. [cloud-defaults, *disabled, target, user-defaults]
	chap-user	An optional iSCSI CHAP username.
	chap-pass	An optional iSCSI CHAP password.
	clear-snap-flag	Promotes a snapshot volume to standard (non-snapshot) volume.
	enable-wb-cache	Enables the write-back cache on the iSCSI target driver, this option uses volatile system RAM for cache and is not recommended.
	is-active-checkpoint	Network Shares and Storage Volumes marked as an active replica checkpoint cannot be replicated over by replication schedules or the replication system. Use is used to protect a given volume/share in the event of site failover to ensure the source side doesn't overwrite replicas at the DR site which are in use. Note: Checkpoints are automatically marked as active replica checkpoints whenever access is granted to them or they are accessed via a file or block storage session.
	sync	Synchronization policy to use for handling writes to the storage pool (standard, always, none). standard mode is a hybrid of write-through and write-back caching based on the O_SYNC flag, always mode is write-through to ZIL which could be SSD cache, and disabled indicates to always use async writes. [always, disabled, *standard]
	compression-type	off | lzjb | gzip | gzip-[1-9] | zle | lz4)
	copies	Indicates the number of copies of each block should be maintained in the Storage Pool. This is a way of getting duplicates for bit-rot protection on a single device (supported only on ZFS based pools).
	qos-policy	Specifies the name or ID of a Quality of Service (QoS) policy. QoS policies limit the throughput and IOPs of a storage volume which is especially useful in multi-tenant environments.
	reserved	Amount of thick-provisioned reserved space for a Storage Volume specified in MiB, GiB, or TiB. examples: 4G, 100M, 1.4T

volume-reassign-schedule

Reassigns the created by ownership for a volume and optionally it's GMT snapshots to a new replication schedule so that they can be automatically cleaned up by the new schedule.

 qs volume-reassign-schedule|v-reassign-schedule --volume=value --schedule=value [--recursive=value ] [--flags=value ] 

	volume	Name of the storage volume or its unique ID (GUID).
	schedule	Name or ID of a replication schedule.
	recursive	Recursively update the GMT snapshots of the specified parent storage volume.
	flags	Optional flags for the operation. [async, force]

volume-resize

Re-sizes a storage volume to make it larger, volumes cannot be reduced in size.

 qs volume-resize|v-resize --volume=value --new-size=value [--flags=value ] 

	volume	Name of the storage volume or its unique ID (GUID).
	new-size	New larger size for the volume specified in MiB, GiB, or TiB. examples: 4G, 100M, 1.4T
	flags	Optional flags for the operation. [async, force]

volume-restore

Restores a storage volume to a previous point in time using a previously created snapshot. The volume restore process uses a full copy technique which is much slower than the Volume Rollback operation but works with any point-in-time snapshot.

 qs volume-restore|v-restore --volume=value --snapshot=value [--flags=value ] 

	volume	Name of the storage volume or its unique ID (GUID).
	snapshot	Name or ID of a snapshot volume to use as the restore point.
	flags	Optional flags for the operation. [async, force]

volume-rollback

Does an instant rollback of a storage volume to a previous point-in-time using the most recently created snapshot volume. Rollback only works with the most recently created snapshot. To rollback using an earlier snapshot, all snapshots that were created after the snapshot to be used for rollback must be deleted. For example, volume V1 with snapshots Vt1, Vt2, Vt3 only Vt3 can be used for rollback. To use Vt1 for rollback Vt2 and Vt3 must be deleted first.

 qs volume-rollback|v-rollback --volume=value --snapshot=value [--flags=value ] 

	volume	Name of the storage volume or its unique ID (GUID).
	snapshot	Name or ID of a snapshot volume to use as the restore point.
	flags	Optional flags for the operation. [async, force]

volume-set-qos

Sets quality of service (QoS) performance maximums for IOPS and bandwidth for the specified storage volume.

 qs volume-set-qos|v-qos --volume=value [--iops-read=value ] [--iops-write=value ] [--bw-read=value ] [--bw-write=value ] [--qos-policy=value ] [--flags=value ] 

	volume	Name of the storage volume or its unique ID (GUID).
	iops-read	Sets the maximum number of 4K read IOPS (I/O per second) as a Quality of Service (QoS) control on the storage volume.
	iops-write	Sets the maximum number of 4K write IOPS (I/O per second) as a Quality of Service (QoS) control on the storage volume.
	bw-read	Sets the maximum read bandwidth (e.g., 100MB) per second as a Quality of Service (QoS) control on the storage volume, 0 (default) indicates unlimited.
	bw-write	Sets the maximum write bandwidth (e.g., 100MB) per second as a Quality of Service (QoS) control on the storage volume, 0 (default) indicates unlimited.
	qos-policy	Specifies the name or ID of a Quality of Service (QoS) policy. QoS policies limit the throughput and IOPs of a storage volume which is especially useful in multi-tenant environments.
	flags	Optional flags for the operation. [async, force]

volume-snapshot

Creates a space efficient copy of the source volume.

 qs volume-snapshot|v-snap --volume=value [--name=value ] [--desc=value ] [--access-mode=value ] [--count=value ] [--lazy-clone=value ] [--wait-for-signal=value ] [--flags=value ] 

	volume	Name of the storage volume or its unique ID (GUID).
	name	Name for the snapshot, if not provided the source volume name will be used as a prefix.
	desc	A description for the object.
	access-mode	Access mode for the volume. [none, readonly, *readwrite]
	count	The number of snapshots of the specified volume to create, default is 1.
	lazy-clone	Delays making the snapshot volume writable until it is assigned to a host or modified in some way. This option doesn't save space but does reduce CPU and memory usage load on the system and is recommended if you're not planning to use the snapshot right away.
	wait-for-signal	Some tasks (volume-snapshot) have the ability to wait for a signal at a key point before proceeding. To signal the task to proceed once started use 'task-proceed'.
	flags	Optional flags for the operation. [async, force]

volume-snapshot-revert

Clears all changes to the snapshot by reverting back to the point-in-time of when the snapshot was originally created. WARNING: Any changes made to the snapshot will be lost.

 qs volume-snapshot-revert|v-snap-revert --volume=value [--flags=value ] 

	volume	Name of the storage volume or its unique ID (GUID).
	flags	Optional flags for the operation. [async, force]

volume-utilization-get

Returns a specific volume utilization metrics for a single volume and specific date.

 qs volume-utilization-get|vu-get --entry=value 

entry

Specifies the GUID or the name of a volume utilization entry in the form of 'VOLUMENAME:TIMESTAMP'

volume-utilization-list

Returns volume utilization information for a specific storage volume or all storage volumes if no volume is specified.

 qs volume-utilization-list|vu-list [--volume=value ] [--offset-days=value ] [--num-days=value ] 

	volume	Name of the storage volume or its unique ID (GUID).
	offset-days	Offset N many days back before pulling the utilization metrics.
	num-days	Number of days of utilization metrics to pull.

Storage Volume Access Control (LUN Masking) [VOLUME-ACLS]

Volume ACLs control which Hosts have access to which Storage Volumes via block protocols like FibreChannel and iSCSI. All Storage Volumes must be assigned before they can be accessed; volumes are never made publically accessible.

Collapse

volume-assign

Enables access to the specific volume from the specified host.

 qs volume-assign|va-add --volume=value --host-list=value [--free-unused-luns=value ] 

	volume	Name of the storage volume or its unique ID (GUID).
	host-list	A list of one or more hosts by name or ID.
	free-unused-luns	Frees up the LUN number assignments for the respective Storage Volumes if there are no more storage volume to host assignments. Default is to retain the LUN number assignments making them static so that subsequent reassignment reuses the same LUN number for the Storage Volume. LUN number assignments only apply to FC access as iSCSI luns are always accessed via unique IQN at LUN 0.

volume-assign-list

Returns a list of all the volume to host assignments, optionally filtered by host or storage volume.

 qs volume-assign-list|va-list [--volume=value ] [--host=value ] 

	volume	Name of the storage volume or its unique ID (GUID).
	host	Name of the host or its unique ID (GUID).

volume-unassign

Disables access to the specific volume from the specified host.

 qs volume-unassign|va-remove --volume=value --host-list=value [--free-unused-luns=value ] 

	volume	Name of the storage volume or its unique ID (GUID).
	host-list	A list of one or more hosts by name or ID.
	free-unused-luns	Frees up the LUN number assignments for the respective Storage Volumes if there are no more storage volume to host assignments. Default is to retain the LUN number assignments making them static so that subsequent reassignment reuses the same LUN number for the Storage Volume. LUN number assignments only apply to FC access as iSCSI luns are always accessed via unique IQN at LUN 0.

volume-unassign-all

Disables all access to the specified volume, host, or host group.

 qs volume-unassign-all|va-remove-all --volume=value [--free-unused-luns=value ] 

	volume	Name of the storage volume or its unique ID (GUID).
	free-unused-luns	Frees up the LUN number assignments for the respective Storage Volumes if there are no more storage volume to host assignments. Default is to retain the LUN number assignments making them static so that subsequent reassignment reuses the same LUN number for the Storage Volume. LUN number assignments only apply to FC access as iSCSI luns are always accessed via unique IQN at LUN 0.

Storage Volume Group Management [VOLUME-GROUP]

Storage Volume Groups are a convience feature to grouping together Storage Volumes so that they can be snapshot as a set.

Collapse

volume-group-clone

Creates a complete block by block copy of all volumes in the group.

 qs volume-group-clone|vg-clone --volume-group=value [--pool=value ] [--name-suffix=value ] [--desc=value ] [--access-mode=value ] [--flags=value ] 

	volume-group	A group of one or more storage volumes.
	pool	Name of the storage pool or its unique ID (GUID).
	name-suffix	Name for the snapshot/clone; if unspecified the snapshot/clone will use the original name with '_snapNN'/'_cloneNN' appended.
	desc	A description for the object.
	access-mode	Access mode for the volume. [none, readonly, *readwrite]
	flags	Optional flags for the operation. [async, force]

volume-group-create

Creates a new storage volume group comprised of the specified storage volumes

 qs volume-group-create|vg-create --name=value --volume-list=value [--desc=value ] [--flags=value ] 

	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	volume-list	A list of one or more storage volumes.
	desc	A description for the object.
	flags	Optional flags for the operation. [async]

volume-group-delete

Deletes a storage volume group, the volumes are not deleted unless the delete-volumes flag is set.

 qs volume-group-delete|vg-delete --volume-group=value [--destroy-volumes=value ] [--flags=value ] 

	volume-group	A group of one or more storage volumes.
	destroy-volumes	If 'true' all the volumes in the group will be deleted with the volume group, default is 'false'.
	flags	Optional flags for the operation. [async, force]

volume-group-get

Returns information about a specific storage volume group.

 qs volume-group-get|vg-get --volume-group=value 

volume-group

A group of one or more storage volumes.

volume-group-list

Returns a list of all the storage volume groups.

 qs volume-group-list|vg-list 

volume-group-modify

Modifies the name and/or description of a storage volume group.

 qs volume-group-modify|vg-modify --volume-group=value [--name=value ] [--desc=value ] 

	volume-group	A group of one or more storage volumes.
	name	Names may only contain alpha-numeric characters and special characters (-_.) excluding the parentheses.
	desc	A description for the object.

volume-group-snapshot

Creates a space efficient copy of all volumes in the group.

 qs volume-group-snapshot|vg-snap --volume-group=value [--name-suffix=value ] [--desc=value ] [--access-mode=value ] [--count=value ] [--wait-for-signal=value ] [--flags=value ] 

	volume-group	A group of one or more storage volumes.
	name-suffix	Name for the snapshot/clone; if unspecified the snapshot/clone will use the original name with '_snapNN'/'_cloneNN' appended.
	desc	A description for the object.
	access-mode	Access mode for the volume. [none, readonly, *readwrite]
	count	The number of snapshots of the specified volume to create, default is 1.
	wait-for-signal	Some tasks (volume-snapshot) have the ability to wait for a signal at a key point before proceeding. To signal the task to proceed once started use 'task-proceed'.
	flags	Optional flags for the operation. [async, force]

volume-group-volume-add

Adds one or more volumes to the specified volume group.

 qs volume-group-volume-add|vgv-add --volume-group=value --volume-list=value 

	volume-group	A group of one or more storage volumes.
	volume-list	A list of one or more storage volumes.

volume-group-volume-remove

Removes one or more volumes from the specified volume group

 qs volume-group-volume-remove|vgv-remove --volume-group=value --volume-list=value 

	volume-group	A group of one or more storage volumes.
	volume-list	A list of one or more storage volumes.