Delete Ceph Cluster Configuration

From OSNEXUS Online Documentation Site
Jump to: navigation, search
Delete the Ceph Cluster and cluster objects associated with it.

The "Delete Ceph Cluster Configuration" feature in QuantaStor is used to remove the configuration of a Ceph cluster from the QuantaStor management interface.

The purpose of the "Delete Ceph Cluster Configuration" function is to cleanly remove the configuration and associated metadata of a Ceph cluster that was previously integrated with QuantaStor. This action effectively disconnects QuantaStor from the Ceph cluster, removing its visibility and management capabilities within the QuantaStor interface.

Deleting the Ceph cluster configuration can be useful in scenarios where you want to discontinue using the Ceph cluster or if you need to reconfigure or reestablish the connection between QuantaStor and the Ceph cluster.

It's important to note that deleting the Ceph cluster configuration does not delete the Ceph cluster itself or any data stored within it. The actual Ceph cluster and its data will remain intact.

Before performing the "Delete Ceph Cluster Configuration" action, it's recommended to ensure that you have proper backups and that the Ceph cluster is no longer needed or has been properly disconnected from the QuantaStor environment.

WARNING: Deleting the selected Ceph Cluster will delete the configuration and all associated cluster objects.

Deleting the Ceph cluster configuration should be done with caution as it is an irreversible operation. Once the configuration is deleted, you will need to reconfigure and integrate the Ceph cluster with QuantaStor if you decide to use it again in the future.

Navigation: Scale-out Storage Configuration --> Scale-out Storage Clusters --> Scale-out Cluster Management --> Delete Cluster (toolbar)

Return to the QuantaStor Web Admin Guide