Difference between revisions of "Modify Management Grid"

From OSNEXUS Online Documentation Site
Jump to: navigation, search
m
m
Line 1: Line 1:
Management grids can have a floating grid IP address which always runs on the current primary nodeThis is useful as you can associate this IP with a FQDN for the grid.  If the appliance where the grid IP is located is turned off then another node is elected as the new primary node for the grid automatically.   
+
Allows you to modify the name and/or description of the QuantaStor storage management GridNote that after you have added all the nodes to a grid you can associate a Grid Management virtual IP (VIF) with the grid which will automatically failover to another node in the event that the current primary goes offlineTo do this you must create a Site Cluster, then add a Grid Management IP to that Site Cluster.
 
+
  
 
[[File:qs_grid_modify.jpg]]
 
[[File:qs_grid_modify.jpg]]

Revision as of 15:35, 7 May 2015

Allows you to modify the name and/or description of the QuantaStor storage management Grid. Note that after you have added all the nodes to a grid you can associate a Grid Management virtual IP (VIF) with the grid which will automatically failover to another node in the event that the current primary goes offline. To do this you must create a Site Cluster, then add a Grid Management IP to that Site Cluster.

Qs grid modify.jpg



Return to QuantaStor Manager Web Admin Guide