Difference between revisions of "Network Port Modify"

From OSNEXUS Online Documentation Site
Jump to: navigation, search
m
m
Line 1: Line 1:
[[File:Modify Network Port 5.4.jpg|412px|thumb|Apply network settings to the System.]]
+
[[File:Modify Network Port 5.5.jpg]]
  
 
Network port configuration allows you to change the IP address, network mask, and gateway for any port on the system.  It is generally best to only setup the gateway on one port that you are using for management.  Most of the time your QuantaStor system will be serving storage to the local area network so the gateway is only used to access outside servers like packages.osnexus.com when upgrading your appliance.   
 
Network port configuration allows you to change the IP address, network mask, and gateway for any port on the system.  It is generally best to only setup the gateway on one port that you are using for management.  Most of the time your QuantaStor system will be serving storage to the local area network so the gateway is only used to access outside servers like packages.osnexus.com when upgrading your appliance.   

Revision as of 17:02, 2 December 2019

Modify Network Port 5.5.jpg

Network port configuration allows you to change the IP address, network mask, and gateway for any port on the system. It is generally best to only setup the gateway on one port that you are using for management. Most of the time your QuantaStor system will be serving storage to the local area network so the gateway is only used to access outside servers like packages.osnexus.com when upgrading your appliance.


Navigation: Storage Management --> Storage System --> Network Ports --> Modify Network Port (rightclick)

For additional information see Administrator Guide, Network Ports.

General Settings

For more complex network typologies it can be important to setup the gateway on more than one port and or setup custom settings and network policies. QuantaStor automatically assigns a 'metric' to the various ports to ensure that one port takes priority but network settings can be adjusted manually via the /etc/networking/interfaces file. If you've Linux network expertise you will find the interfaces file familiar as QuantaStor builds on top of Ubuntu Server, if not it is good to get some assistance from our support team.

Firewall Settings

Each Service's firewall settings may be modified in this dialog.

Modify Network Port - Firewall.jpg

Return to the QuantaStor Web Admin Guide