Difference between revisions of "Storage Pool HA Failover Interface Create"
m |
m |
||
| Line 5: | Line 5: | ||
and then, [http://wiki.osnexus.com/index.php?title=Storage_Pool_Ha_Failover_Group_Create create a Storage Pool HA Group] associated with the Storage Pool. | and then, [http://wiki.osnexus.com/index.php?title=Storage_Pool_Ha_Failover_Group_Create create a Storage Pool HA Group] associated with the Storage Pool. | ||
| − | '''Navigation:''' High-availability VIF Management --> Storage Pool HA Groups --> Virtual Interface Management --> Add Pool | + | '''Navigation:''' High-availability VIF Management --> Storage Pool HA Groups --> Virtual Interface Management --> Add Pool HA VIF ''(toolbar)'' |
[[File:Add Pool HA Vrt Intf.jpg|512px]] | [[File:Add Pool HA Vrt Intf.jpg|512px]] | ||
Revision as of 08:33, 11 August 2021
To configure HA for a Storage Pool you must have shared storage (typically via a SAS JBOD with dual SAS expanders) attached to two appliances via HBAs. Both appliances must be in the same QuantaStor Grid. Once the HA group is created you will need to create one or more HA Failover Interfaces associated with the storage pool so that in the event of a failover the workloads are still able to access the storage on the same IP addresses.
Note: Before you create a Storage Pool High Availability (HA) Failover Interface you must create a Site Cluster and then, create a Storage Pool HA Group associated with the Storage Pool.
Navigation: High-availability VIF Management --> Storage Pool HA Groups --> Virtual Interface Management --> Add Pool HA VIF (toolbar)
