Difference between revisions of "Storage Pool Recover"
From OSNEXUS Online Documentation Site
m |
m |
||
Line 1: | Line 1: | ||
If you are using hardware RAID then you will mark hot-spare disks in the 'Hardware Enclosures & Controllers' section. This is the most common way of managing spare disk drives but you can also designate spares at the software RAID level using this dialog if you're using software RAID5/6/10/Z/Z2. | If you are using hardware RAID then you will mark hot-spare disks in the 'Hardware Enclosures & Controllers' section. This is the most common way of managing spare disk drives but you can also designate spares at the software RAID level using this dialog if you're using software RAID5/6/10/Z/Z2. | ||
− | '''Navigation:''' Storage Management --> Storage Pools --> Storage Pool --> | + | '''Navigation:''' Storage Management --> Storage Pools --> Storage Pool --> Add Hot-Spares ''(toolbar)'' |
[[File:Recover a Storage Pool.jpg|512px]] | [[File:Recover a Storage Pool.jpg|512px]] |
Revision as of 16:50, 27 December 2021
If you are using hardware RAID then you will mark hot-spare disks in the 'Hardware Enclosures & Controllers' section. This is the most common way of managing spare disk drives but you can also designate spares at the software RAID level using this dialog if you're using software RAID5/6/10/Z/Z2.
Navigation: Storage Management --> Storage Pools --> Storage Pool --> Add Hot-Spares (toolbar)