Difference between revisions of "Storage Pool Recover"
From OSNEXUS Online Documentation Site
m |
m |
||
| Line 2: | Line 2: | ||
| − | [[File:Add Hot Storage Pool.jpg| | + | [[File:Add Hot Storage Pool.jpg|700px]] |
Revision as of 09:38, 8 November 2017
If you are using hardware RAID then you will mark hot-spare disks in the 'Hardware Enclosures & Controllers' section. This is the most common way of managing spare disk drives but you can also designate spares at the software RAID level using this dialog if you're using software RAID5/6/10/Z/Z2.
