Difference between revisions of "Storage Pool Recover"
From OSNEXUS Online Documentation Site
m |
m |
||
| Line 1: | Line 1: | ||
| + | [[File:Add Spares - Recover Pools.jpg|thumb|512px|If the Storage Pool is in a degraded state it will auto-repair using one or more of the designated hot-spares automatically.]] | ||
| + | |||
If you are using hardware RAID then you will mark hot-spare disks in the 'Hardware Enclosures & Controllers' section. This is the most common way of managing spare disk drives but you can also designate spares at the software RAID level using this dialog if you're using software RAID5/6/10/Z/Z2. | If you are using hardware RAID then you will mark hot-spare disks in the 'Hardware Enclosures & Controllers' section. This is the most common way of managing spare disk drives but you can also designate spares at the software RAID level using this dialog if you're using software RAID5/6/10/Z/Z2. | ||
'''Navigation:''' Storage Management --> Storage Pools --> Storage Pool --> Recover ''(toolbar)'' | '''Navigation:''' Storage Management --> Storage Pools --> Storage Pool --> Recover ''(toolbar)'' | ||
| − | |||
| − | |||
Revision as of 15:59, 20 May 2019
If you are using hardware RAID then you will mark hot-spare disks in the 'Hardware Enclosures & Controllers' section. This is the most common way of managing spare disk drives but you can also designate spares at the software RAID level using this dialog if you're using software RAID5/6/10/Z/Z2.
Navigation: Storage Management --> Storage Pools --> Storage Pool --> Recover (toolbar)
